Au core-PtAu alloy shell nanowires for formic acid electrolysis

Inefficient electrocatalysts and high-power consumption are two thorny problems for electrochemical hydrogen(H2)production from acidic water electrolysis.Herein we report the one-pot precise synthesis of ultrafine Au core-Pt Au alloy shell nanowires(Au@PtxAu UFNWs).Among them,Au@Pt_0.077 Au UFNWs exhibit the best performance for formic acid oxidation reaction(FAOR)and hydrogen evolution reaction(HER),which only require applied potentials of 0.29 V and-22.6 m V to achieve a current density of 10 m A cm^-2,respectively.The corresponding formic acid electrolyzer realizes the electrochemical H2 production at a voltage of only 0.51 V with 10 m A cm^-2 current density.Density functional theory(DFT)calculations reveal that the Au-riched Pt Au alloy structure can facilitates the direct oxidation pathway of FAOR and consequently elevates the FAOR activity of Au@Pt_0.077 Au UFNWs.This work provides meaningful insights into the electrochemical H₂ production from both the construction of advanced bifunctional electrocatalysts and the replacement of OER.     

Layered Ag-graphene films synthesized by Gamma ray irradiation for stable lithium metal anodes in carbonate-based electrolytes

Lithium metal batteries are considered as high energy density battery systems with very promising prospects and have bee n widely studied.However,The uncon trollable plating/strippi ng behavior,infinite volume change and den drites formation of lithium metal anode restrict the applicati on.The unc on trolled n ucleati on of lithium caused by the non uniform multi-physical field distributions,can lead to the undesirable lithium deposition.Herein,a graphene composite uniformly loaded with Ag nano-particles(Ag NPs)is prepared through a facile Gamma ray irradiation method and assembled into self-supported film with layered structure(Ag-rGO film).Whe n such film is used as a lithium metal an ode host,the uncontrolled deposition is converted into a highly nucleation-induced process.On one hand,the Ag NPs distributed between the in terlayers of graphe ne can preferentially induce lithium nu cleati on and en able uniform deposition morphology of lithium between interlayers.On the other hand,the stable layered graphene structure can accommodate volume change,stabilize the interface between anode and electrolyte and inhibit dendrites formation.Therefore,the layered Ag-rGO film as anode host can reach a high Coulombic efficiency over 93.3% for 200 cycle(786 h)at a current density of 1 mA cm^-2 for 2 mAh cm^-2 in carbonate-based electrolyte.This work proposes a facile Gamma ray irradiation method to prepare metal/3D-skeleton structure as lithium anode host and demonstrates the potential to regulate the lithium metal deposition behaviors via manipulating the distribution of lithiophilic metal(e.g.Ag)in 3D frameworks.This may offer a practicable thinking for the subsequent design of the lithium metal anode.     

中国纤维素乙醇技术的研究进展

中国面临着严重的能源短缺和环境污染问题,中国政府正在局部几个省份内政策性鼓励燃料乙醇生产和使用.尽管当前主要是用玉米和谷物作为生产乙醇的原料,然而中国具有大量潜在的低成本的纤维素生物质原料,可以极大地扩大乙醇的产量,降低原料成本.近20年来,由于技术的革命性进步,已使得纤维素乙醇的生产成本从4美元/加仑以上,降低至约1.2-1.5美元/加仑.其中,每吨生物质约44美元.因此,目前乙醇掺汽油具有十分强的市场竞争力.已有几个公司正在建造首批商业纤维素乙醇工厂,虽然这些刚起步的小型设施在合理利用和管理上风险较小,但规模经济需要较大型工厂.尽管配送生物质原料的成本会随需求的增加而增加,但在乙醇生产基础上的生物精炼技术的发展,尤其是化工产品和动力的协同生产,将会使全过程的经济可行性大大提高.进一步深入的基础研究,将解决低成本下实现纤维素的完全利用,以确保在无政策性补贴的前提下,真正使纤维素乙醇成为具有市场竞争力的低成本纯液体燃料.     

Binary ligand strategy toward interweaved encapsulation-nanotubes structured electrocatalyst for proton exchange membrane fuel cell

Hierarchically porous architecture of ir on-nitroge n-carb on(Fe-N-C)for oxyge n reducti on reaction(ORR)is highly desired towards efficient mass transfer in the fuel cell device manner.Herein,we reported a binary ligand strategy to prepare zeolitic imidazolate frameworks(ZIFs)-derived precursors,wherein the addition of secondary ligand endows precursors with the capabilities to transform into porously interweaved encapsulation-nanotubes structured composites after calcination.The optimal catalyst,i.e.,termed as Fe₆-M/C-3,exhibits excellent durability with 88.8%current retention after 50,000 seconds in 0.1 M HClO₄solution by virtue of nanoparticles-encapsulation features,which is more positive than the benchmark commercial 20 wt%Pt/C catalyst.Moreover,a promising maximum power density of Fe₆-M/C-3 as cathode catalyst was also dem on strated in proton exchange membrane fuel cells(PEMFCs)measurements.Therefore,this binary ligand approach to the fabrication of hierarchically porous structures would also have significant implications for various other electrochemical reactions.     

Molten salt as ultrastrong polar solvent enables the most straightforward pyrolysis towards highly efficient and stable single-atom electrocatalyst

Currently,pyrolysis as the most widely used method still has some key issues not well resolved for synthesis of carbon-supported single-atom catalysts(C-SACs),e.g.,the sintering of metal atoms at high temperature as well as the high cost and complicated preparations of precursors.In this report,molten salts are demonstrated to be marvellous medium for preparation of C-SACs by pyrolysis of small molecular precursors(ionic liquid).The ultrastrong polarity on one hand establishes robust interaction with precursor and enables better carbonization,resulting in largely enhanced yield.On the other hand,the aggregation of metal atoms is effectively refrained while no nanoparticle or cluster is formed.By this strategy,a C-SAC with atomically dispersed Fe-N₄ sites and a high specific area over 2000 m² g^-1 is obtained,which illustrates high ORR activity in both acid and alkaline media.Moreover,this SAC exhibits superior methanol tolerance and stability after acid soaking at 85℃ for 48 h.It is believed that the molten-salts-assisted pyrolysis can be developed into a routine strategy as it not only can largely simply the synthesis of C-SACs,but also can be extended to prepare other types of SACs.     

镧对Mg-Si合金中Mg2Si相变质的影响

研究了Mg-5Si合金中La的添加对初生Mg2Si相变质的影响。结果表明,适量的La能够有效地变质初生Mg2Si相。基于本文的研究,在添加约0.5%La时,获得了最佳的变质效果,此时,初生Mg2Si相的尺寸减小到25μm以下,其形态从粗大的树枝形状变为多面体形状。然而,当La增加到0.8%或者更高时,初生Mg2Si相又生长为粗大的树枝形态。而且,在凝固过程中发现形成了一些LaSi2化合物,这些化合物的数量随着La的增加而呈现逐渐增加的趋势。     

电感耦合等离子体质谱法测定天然水体中19种元素

建立STD/KED模式-电感耦合等离子体质谱（ICP-MS）法同时测定天然水体中铍、硼、钛、钒、铬、锰、钴、镍、铜、锌、钼、镉、锑、钡、铊、铅、铁、砷和硒19种元素的分析方法。仪器调谐校准后,样品在线加入锂、钪、铑、铋校准溶液校正,以标准曲线内标法定量分析。标准曲线相关系数均大于0.999,样品加标回收率为92.6%～103.6%,质控样品测定值相对标准偏差为0.20%～2.6%(n=6),方法检出限为0.01～0.70μg/L。该方法灵敏度高,操作简便,节省人力,能满足天然水体中19种元素的同时检测需要。     

电解质-非电解质混合溶液活度系数的关联及溶解的推算 II:NH3-NaCl-Na2SO4-H2O体系的液固平衡热力学

由于在研究的体系中, Na2SO4是非对称电解质, 且能生成水合盐, 故推导了由非对称型电解质与非电解质所构成的混合溶液的各组分的活度系数关联通式, 并在此基础上讨论了水合盐液固平衡的计算方法.     

黄花棘豆化学成分的研究II:两种三萜皂苷的结构

从黄花棘豆的总皂苷中分离出两个新皂苷1和2.经光谱分析及化学方法确证,1为3-O-[α-L-鼠李吡喃糖基(1→2)-β-D-葡萄吡喃糖基(1→4)-β-D-葡萄吡喃糖醛酸基]-黄豆醇B;2为3-O-[α-L-鼠李吡喃糖基(1→2)-α-L-阿拉伯吡喃糖基(1→4)-β-D-葡萄吡喃糖醛酸基]-黄豆醇B.     

二氧化钛纳米管的研究进展

二氧化钛纳米管由于其新奇的光电、催化、气敏等性能引起了广泛的关注,在太阳能电池、光催化、环境净化、气体传感器等领域有潜在的应用价值.本文概述了近年来在制备方法、反应机理和组成、晶型和形貌及掺杂和应用方面的进展,并讨论了今后可能的研究发展方向.     

Positron annihilation study on interaction between hydrogen and defects in AISI 304 stainless steel

Interaction between hydrogen and defects in AISI 304 stainless steel was investigated by positron annihilation lifetime spectra (PALS) and coincidence Doppler broadening (CDB) measurements. PALS results show that long lifetime component τ₂ is about 260–270 ps, and does not change with current density, which is ascribed to the formation of three-dimensional vacancy cluster of 5–7 vacancies. Furthermore, the CDB ratio curves show that an obvious peak appears in the high-momentum region after hydrogen charging, and the peak site does not vary with current density. The mechanism of interaction between hydrogen with defects is discussed.     

Chemical analysis of precipitates in metallic alloys using coincidence Doppler broadening of positron annihilation radiation

Two-detector coincidence Doppler broadening (CDB) method of positron annihilation radiation is applied to the study of precipitates in metals. As the first step, the CDB spectra for many kinds of elements are measured to obtain the “fingerprint” of each element for the chemical analysis of the precipitates in metals. Utilizing the fingerprint of Cu, we made chemical analysis of nano-particles formed in the initial stage of thermal aging in a Fe–Cu alloy, and found that the particles are consisting of Cu only and free from vacancies, which demonstrates the usefulness of this method in the study of the precipitates.     

Gamma and positron irradiation effects on polypropylene studied by coincidence Doppler broadening spectroscopy

The coincidence Doppler broadening (CDB) technique was applied to study the positron source irradiation effect on γ-irradiated and unirradiated polypropylene. CDB results showed presence of carbonyl groups (CG) whose concentration increase with the γ-irradiation dose. Positron annihilation lifetime (PAL) spectroscopy was used to monitor the positronium (Ps) formation. The γ-irradiation effect on Ps inhibition was significantly weaker than the positron irradiation effect. The joined examination of CDB and PAL data showed that the annihilation on CGs oxygen was not the main reason for the detected Ps inhibition during the positron-irradiation.     

具有生物活性的人带3蛋白胞质片段融合蛋白的克隆、表达与纯化

用PCR法从质粒pHB3中扩增了人红细胞带3蛋白胞质片段(CDB3)基因.PCR产物经限制性内切酶切割后与多克隆位点处带有编码6个组氨酸序列的高效表达载体pET28b连接,构建为重组子pCDBHistag.重组子经酶切及序列测定后在大肠杆菌BL21(DE3)中获得高效表达,可溶性目的蛋白占菌体总蛋白的40%左右.C端带有6个连续组氨酸的带3蛋白胞质片段作为融合蛋白不仅可以降低宿主菌蛋白酶对其水解程度,而且简化了目的蛋白的纯化过程.经一步螯合Ni²⁺的亲和层析获得了电泳纯的带3蛋白胞质片段融合蛋白.活性测定结果表明,带3蛋白胞质片段融合蛋白能够抑制醛缩酶(Aldolase)活性的70%,与文献报道的人红细胞内带3蛋白胞质片段具有相同的功能.     

Investigation of the near surface region of chemically treated and Al-coated PMMA by Doppler-broadening spectroscopy

The positronium formation is studied in the near surface region of Polymethylmethacrylate (PMMA), which was treated with isopropanol and acetone by energy dependent Doppler-broadening spectroscopy. In addition, the variation of Ps-formation was investigated at aluminium-coated PMMA. The coincident DB (CDB) spectra reveal the fraction of positrons, which annihilate in the aluminium. All measurements were performed with mono-energetic positrons up to an energy of 31 keV at the CDB-spectrometer at the new positron beam facility NEPOMUC at FRM II.     

Revealing the Nano‐Level Molecular Packing in Chitosan–NiO Nanocomposite by Using Positron Annihilation Spectroscopy and Small‐Angle X‐ray Scattering

Chitosan–NiO nanocomposite (CNC) is shown to be a potential dielectric material with promising properties. CNCs containing NiO nanoparticles (0.2, 0.6, 1, 2, 5 wt %) are prepared through chemical methods. The inclusion of NiO nanoparticles in the chitosan matrix is confirmed by scanning electron microscopy (SEM) and X‐ray diffraction. The morphology of the NiO nanoparticles and the nanocomposites is investigated by transmission electron microscopy and SEM, respectively. Positron annihilation lifetime spectroscopy (PALS) and the coincidence Doppler broadening (CDB) technique are used to quantify the free volume and molecular packing in the nanocomposites. The triplet‐state positronium lifetime and the corresponding intensity show the changes in nanohole size, density, and size distribution as a function of NiO loading. Small‐angle X‐ray scattering indicates that the NiO aggregates are identical in all the CNCs. The momentum density distribution obtained from CDB measurements excludes the possibility of a contribution of vacant spaces (pores) available in NiO aggregates to the free volume of nanocomposites upon determination by using PALS. The results show systematic variation in free‐volume properties and nano‐level molecular packing as a function of NiO loading, which is presumed to play a vital role in determining the various properties of the nanocomposites.     

丙烯酰胺基偶氮苯的RAFT聚合反应动力学

以丙烯酰胺基偶氮苯(AAAB)为单体,二硫代苯甲酸异丙苯酯(CDB)为链转移剂,偶氮二异丁腈(AIBN)为引发剂,N,N-二甲基甲酰胺(DMF)为溶剂,利用可逆加成-断裂链转移(RAFT)聚合法合成了侧链含有偶氮苯基团的聚丙烯酰胺基偶氮苯(PAAAB),同时考察了反应温度、引发剂浓度、链转移剂浓度等因素对聚合反应的影响。利用FT-IR、1H NMR、GPC等对其结构进行了表征。结果表明,聚合反应动力学曲线呈良好的线性关系,分子量分布窄;随着[CDB]/[AIBN]比例的增大,聚合速率、分子量和分子量分布均下降。     

Siloxane-containing polyenaminoesters

Polyenaminoesters were prepared by condensation of succinyl succinic ester (SSE) and p-bis-carbomethoxy diacetyl benzene (CDB) with 1,3-bis(3-aminopropyl)-1,1,3,3-tetramethyldisiloxane. Conditions of solvent and temperature were discovered which yielded soluble polymer from SSE after heat treatment. CDB yields only tough, rubbery, insoluble products.     

甲基丙烯酸N,N-二甲氨基乙酯/丙烯酸N,N-二甲氨基乙酯的可逆加成断裂链转移聚合研究

合成了二硫代苯甲酸2- (乙氧基羰基)异丙酯(ECPDB)、二硫代苯甲酸异丙苯酯(CDB)、二硫代苯甲酸1 苯基乙酯(PEDB) 3种二硫代苯甲酸酯链转移剂.以这3种转移剂为基础,用凝胶渗透色谱和核磁共振测试了甲基丙烯酸N ,N 二甲氨基乙酯(DMAEMA)和丙烯酸N ,N 二甲氨基乙酯(DMAEA)两种碱性单体的可逆加成断裂链转移(RAFT)聚合的聚合物分子量、分子量分布和结构.发现有的聚合体系聚合物分子量分布较窄,但实验数均分子量与理论数均分子量相差较大;有的体系则转化率很低,聚合物分子量很小.这些可能是由聚合体系中单体活性和链转移剂链转移能力之间的匹配不太协调,使可逆加成断裂链转移快速平衡反应发生偏移或破坏造成的.因此,可通过更换单体或链转移剂来调节这种匹配,从而使可逆加成断裂链转移快速平衡保持稳定,达到聚合更可控,实验分子量与理论分子量更接近,分子量分布更窄的目的.     

Reversible addition–fragmentation chain‐transfer polymerization: Unambiguous end‐group assignment via electrospray ionization mass spectrometry

Electrospray ionization mass spectrometry was performed to identify the structure of polymeric methyl acrylates generated via the cumyl dithiobenzoate (CDB), cumyl p‐fluorodithiobenzoate (CPFDB), and 1‐phenylethyl dithiobenzoate (PEDB) mediated reversible addition–fragmentation chain‐transfer (RAFT) polymerizations. The relatively simple spectra clearly demonstrate the end groups of this living free‐radical polymerization technique. Only polymeric chains carrying one leaving group of the RAFT agent and the dithiobenzoate end group as the active RAFT center were discovered. Multiple‐stage mass spectrometric experiments and oxidation of the dithioester end group confirmed the structure of the generated polymers. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4032–4037, 2002