Synthesis and characterization of organosoluble polyamides from quinoxaline based diamine

<正>Aromatic/aliphatic polyamides were synthesized from a diamine monomer,2,3-bis-p-aminophenylquinoxaline (Ⅳ),based on quinoxaline and various dicarboxylic acids of aliphatic,aromatic and heterocyclic.The diamine and polyamides were characterized by elemental analysis,FTIR and ~1H-NMR.The solubility of the polyamides was affected by the quinoxaline and heterocyclic groups in the polymer chain.They were all soluble in common organic solvents such as dimethylsulfoxide(DMSO),N,N-dimethylformamide(DMF) and N-methylpyrolidone(NMP).The polyamides showed inherent viscosity in the range of 0.25-0.3 dL/g in DMSO at 25℃and good thermal stability with the char yields in the range of 65%-82%at 600℃in nitrogen.     

Heat-resistant, pyridine-based polyamides containing ether and ester units with improved solubility

<正>A diamine containing ether and ester units,as basic monomer for the preparation of polyamides,was prepared via three consecutive reactions.Nucleophilic substitution reaction of 1,4-dihydroxy benzene with 4-nitrobenzoyl chloride produced 4-hydroxyphenyl 4-nitrobenzoate(HPNB).Reduction of nitro groups to amino groups using Fe and HC1 resulted in preparation of 4-hydroxyphenyl 4-aminobenzoate(HPAB).The diamine was synthesized through nucleophilic substitution reaction of HPAB with 2,6-dichloropyridine The precursors and diamine were fully characterized by common methods,and the diamine was polycondensed with different diacid chlorides in the presence of an acid scavenger to prepare new polyamides.The polyamides were characterized,and their physical properties including thermal stability and behavior, inherent viscosity and solubility were studied.     

Synthesis and Characterization of Poly(ether amide)s Containing Phthalazinone Moieties

Soluble aromatic polyamides containing phthalazinone moieties were prepared. Those polymers were obtained from the solution polymerization of a new diacid containing phthalazinone moieties with various diamines. The new monomer, 2-(4-carboxyphenyl)-4-(4-carboxyphenoxy)phenyl-1(2H)phthalazinone(Ⅳ) was synthesized in a two-step reaction sequence. 2-(4-Cyanophenyl)-4-(4-cyanophenoxy)phenyl-1(2H)phthalazinone (Ⅲ) was prepared via the condensation reaction of 4-(4-hydroxyphenyl)-1(2H)phthalazinone (Ⅰ) with p-chlorobenzonitrile (Ⅱ). After (Ⅲ) was hydrolyzed, (Ⅳ) was acquired. The synthesized polyamides were characterized by means of viscosimetry, DSC, FT-IR, 1H NMR and EA. The polyamides have a high glass transition temperature which can be as high as 316 ℃. The polyamides also have good solubilities in some organic solvents.     

Synthesis,characterization and corrosion inhibitive properties of new thiazole based polyamides containing diarylidenecyclohexanone moiety

The present work aimed to synthesize a new interesting series of thiazole based polyamides containing diarylidenecyclohexanone moiety 5a-5f using low temperature solution polycondensation technique. The new polymers were synthesized by the reaction of thiazole based monomer namely, bis(2-aminothiazol-4-ylbenzylidene)cyclohexanone 3 with different aliphatic and aromatic diacid chlorides using NMP, and in the presence of anhydrous Li Cl as catalyst. Adipoyl, sebacoyl, oxaloyl, terephthaloyl, isophthaloyl dichlorides and biphenyl dicarbonyl dichloride were used as diacid chlorides. The structure of the model compound 4 as well as the new polymers was confirmed by correct elemental and spectral analyses. The thermal properties of those polymers were evaluated by TGA and DTG measurements and correlated to their structural units, beside X-ray diffraction analysis, solubility and viscometry measurements. The inherent viscosities for the synthesized polymers were in the range 0.6–1.03 d L/g. On the other hand the corrosion inhibitive properties of monomer 3 as well as polyamides 5d and 5f as selected examples were carried out on carbon-steel in 0.5 mol/L H2SO4 at 40 °C. The calculated inhibition efficiency(IE%) for polymer 5d was in the range(82 ± 6)% in all selected concentrations. The best value of IE% was obtained at 1 mg/L to reach 98.24% for polymer 5d and at 0.5 mg/L to reach 87.75% for polymer 5f.     

Synthesis and characterization of polyamides derived from (4-(4-(2, 6-diphenylpyridin-4yl)phenoxy)phenyl)-3, 5-diaminobezamide

New types of polyamides containing pendent triaryl pyridine groups were successfully synthesized by direct polycondensation of a symmetry diamine,（4-（4-（2,6-diphenylpyridin-4yl）phenoxy）phenyl）-3,5-diaminobezamide（DPDAB）, and various aromatic and aliphatic dicarboxylic diacids in NMP using triphenyl phosphate（TPP） and pyridine as catalyst. The diamine and all the prepared polyamides were fully characterized by using FT-IR,¹H-NMR,UV-Vis spectroscopy, fluorimetry and elemental analysis.The inherent viscosity of polyamides ranged from 0.45 dL/g to 0.68 dL/g.All the polymers exhibited solubility in common polar aprotic solvents such as NMP,DMAc,DMF,DMSO,pyridine,HMPA,and even in less polar solvents such as THF and m-cresol at room temperature.Thermal properties of polyamides were evaluated by means of DSC,DMTA and TGA.These polymers showed glass transition temperatures（T_g） in the range of 138-210℃. Their initial decomposition temperature（T_i） varied from 265℃to 310℃under N₂.The dilute solution（0.2 g/dL） of polyamides in DMF exhibited fluorescence emission withλ_max in the range of 470-550 nm.     

New Polymer Syntheses Part 60: A Facile Synthetic Route to Polyamides Based on Thieno[2,3-b]thiophene and Their Corrosion Inhibition Behavior

Polyamides containing thieno[2,3-b]thiophene moiety were prepared via a simple polycondensation reaction of the diaminothieno[2,3-b]thiophene monomer 1 a with different kinds of diacid chlorides(including oxalyl, adipoyl, sebacoyl, isophthaloyl,terephthaloyl, 4,4′-azodibenzoyl, 3,3′-azodibenzoyl, p-phenylene diacryloyl) in the presence of Li Cl and NMP as a solvent through lowtemperature solution polycondensation. The chemical structures of model compound and synthesized polyamides were confirmed by FTIR, nuclear magnetic resonance spectroscopy(including ~1H-NMR and ~(13)C-NMR) and elemental analysis. In addition, the thermal stability, crystallinity structure and surface morphology of synthesized polyamides were characterized via thermogravametric analysis(TGA), wide-angle X-ray diffraction analysis(WAXD) and scanning electron microscopy(SEM). Also, the corrosion inhibition behavior of selected examples of polyamides was investigated; the inhibitive effect of the investigated polymers for carbon steel in 1.0 mol·L~(-1) HCl was studied using potentiodynamic polarization(PDP) and electrochemical impedance spectroscopy(EIS) methods. PDP results displayed that the polyamides containing thieno[2,3-b]thiophene moiety can be as mixed-type inhibitors. The inhibition efficiency(P, %) was found to be in the range from 67.13% to 96.01%. There is an increase in P by the synthesized polymers in comparison to the starting monomer.The adsorption of these polymers was found to obey Langmuir adsorption isotherm.     

STUDIES OF ACTIVE DIACYLAMIDES OF BENZOTRIAZOLE Ⅰ. SYNTHESIS OF POLYAMIDES AND POLYESTERS*

Two new routes to polyamides and polyesters were established, based on the polycondensationof new typical active diacylamide of benzotriazole, such as 1, 1'-(isophthaloyl) bisbenzotriazole(IPBBT) and 1, 1'-(terephthaloyl)bisbenzotriazole (PBBT) with diamines, diols and diphenol underdifferent mild conditions. The N-acylation of polycondensation occurred at room temperaturewithout added catalyst, the O-acylation of polycondensation had to complete in the presence oftriethylamine as a catalyst at 60℃.     

Polyamides with pendant 1,3,4-oxadiazole and pyridine moieties

A novel aromatic diamine,2-（5-（3,5-diaminophenyl）-l,3,4-oxadiazole-2-yl）pyridine（POBD）,containing a pyridine ring and a 1,3,4-oxadiazole moiety,was synthesized.It was used in a polycondensation with various aromatic and aliphatic diacid chlorides to generate a series of new aromatic polyamides with pendant 1,3,4-oxadiazole groups.The prepared polyamides were characterized by IR,elemental analysis and through the synthesis of model compounds.Thermophysical properties of the synthesized polyamides have been studied by DSC,TGA and inherent viscosity measurements. Relatively high inherent viscosity values（0.76-1.62 dL/g,in 0.125%H₂SO₄ at 25℃） were observed for these compounds. Number average molecular weight（M_n） of the polymers was measured by vapor phase osmometry（VPO）.The introduction of bulky side chains in the structure of aromatic polyamides led to increased solubility of these polymers in common polar and aprotic solvents,such as DMF,DMSO,NMP and DMAc,which allowed thin films to be cast from polymer solutions. The highest molecular weight（M_n = 51190） was observed for polymer（DC）,which was prepared from pyridine-2,6-dichlorocarbonyl.     

SYNTHESIS AND CHARACTERIZATION OF FLUORINATED POLYAMIDES DERIVED FROM UNSYMMETRICAL DIAMINES CONTAINING THE PHTHALAZINONE MOIETY

A novel unsymmetrical fluorinated diamine monomer with kink non-coplanar heterocyclic structures, 1,2-dihydro- 2-（4-amino-2-trifluoromethyophenyo）-4-[4-（4-amino-2-trifluoromethyophenoxy）phenyo]（2H）phthaoazin-1-oneo was prepared through the nucleophilic substitution reaction of 1-trifluromethyl-2-chloro-5-nitrobenzene with 1,2-dihydro-4-（4- hydroxyphenyl）（2H）phthalazin-l-one in the presence of potassium carbonate, followed by catalytic reduction with hydrazine and Pd-C. A series of new fluorinated polyarnides were synthesized by the phosphorylation polyamidation of the fluorinated diamine with various dicarboxylic acids. The prepared polymers were obtained in quantitative yields with moderately and high inherent viscosities （0.47-0.87 dL/g）. They were all amorphous and readily soluble in various polar aprotic solvents such as N-methyl-2-pyrrolidone （NMP）, N,N-dimethylformamide （DMF）, N,N-dimethylacctamide （DMAc）, pyridine （Py） and m-cresol at room temperature. These fluorinated polyamides have excellent thermal properties. The glass transition temperatures were all above 300℃. The 5% and 10% weight loss temperatures were in the range of 437-466℃ and 482-525℃ in nitrogen atmosphere, respectively.     

Wholly aromatic chiral polyamides bearing pendant phthalimido and L-isoleucine moities

<正>A potential biodegradable and optically active bulky chiral aromatic amide-imidic diacid monomer,(2S,3S)-5-(3- methyl-2-phthalimidylpentanoylarnino)isophthalic acid(7),containing a rigid phthalimide and flexible L-isoleucine pendant group was synthesized in three steps.New aromatic polyamides including pendant phthalimido groups and flexible side spacers have been synthesized by direct polycondensation reaction of equimolar amounts of different aromatic diamines with an optically active diacid 7,using N-methyl-2-pyrrolidone(NMP) as a solvent and triphenyl phosphite/CaCl_2/pyridine as a condensing agent.These polyamides were characterized by FTIR,~1H-NMR spectroscopy,specific rotation, thermogravimetric and elemental analysis.The resulting polymers have inherent viscosities in the range of 0.21-0.45 dL/g. Amino acid existence in this backbone results in optically active polymers.Due to introduction of bulky and flexible groups in these polyamides,they show improved solubility in polar aprotic solvents such as NMP and dimethylacetamide and also good thermal stability(10%weight loss temperatures in excess of 330℃,and char yields at 600℃in nitrogen higher than 62%).     

THE EFFECTS OF IRRADIATION ON THE THERMAL PROPERTIES OF SEMI-CRYSTALLINE POLYAMIDES

Irradiation crosslinking of semi-crystalline polyamides was performed by high energy electronswith various dosages. It is known that the melting behavior of the polymers after irradiation is acomplex phenomenon. In company with the wide angle X-ray diffraction and DSC data of irradiatedand unirradiated polyamides it is possible to develop the local order and perfection of the crystallinitiesslightly which resulted from introduction of intermolecular crosslinking in amorphous region, incl-uding in amorphous-crystalline interface and crystalline defect regions due to irradiation. It canbe explained that slight increase of melting temperature (T_m) and heat of fusion (△H_f) with increasingdosage for both of higher crystallinity nylon 4 and nylon 6. For irradiated lower crystallinity nylons,in contrast, the T_m and △H_f decrease obviously with increasing dosage. In this case, radiation cross-linking "freeze in" the pre-existing morphology, and then the prevention for reorganization duringheating is a dominant effect. The T_m from the second melting for all of the samples were depressed,corresponding with Flory theory. Therefore the crosslinks imposed on the molecules restrainedthe molecular mobility, and that not only depresses the crystallinity but also increases the imperfec-tion of crystallites when the radiated polymer melted and then recrystallized. These are also reflectedin the depression of heat and entropy of fusion as well as the appearance of double melting peakson the DSC thermograms.     

Synthesis of semiaromatic polyamides based on decanediamine

<正>Long chain semiaromatic polyamides were synthesized by the reactions of decanediamine with various aromatic diacids and characterized by Fourier transform infrared spectroscopy(FT-IR) and nuclear magnetic resonance(~1H-NMR). The thermal behaviors were determined by differential scanning calorimetry(DSC) and thermogravimetric analysis(TGA). The solubility,dynamic mechanical,physical and mechanical properties of the polyamides have also been investigated.The resultant polyamides have intrinsic viscosity ranging from 1.7 dL/g to 2.1 dL/g.Their melting temperatures range from 305℃to 343℃,and the glass transition temperatures fall in the range of 125-130℃.The tensile strength of the polyamides is above 100 MPa.     

Synthesis and characterization of Schiff-base-containing polyamides

A series of new Schiff base polyamides（PAs） were synthesized by polycondensation of benzilbisthiosemicarbazone diamine（LH₆） with different commercially available aliphatic and aromatic diacid chlorides. The monomer and all the PAs were characterized by FTIR,¹H-NMR,and elemental analysis.The prepared polyamides showed inherent viscosities in the range of 0.30-0.36 dL/g in DMF at 25℃,indicating their moderate molecular weight.The PAs were completely soluble in aprotic polar solvents such as dimethylformamide（DMF）,N-methylpyrolidone（NMP）, tetrachloroethane（TCE）,dimthylsulfoxide（DMSO） and also in H₂SO₄ and partially soluble in THF,acetone and chloroform at room temperature.Thermal analysis showed that these PAs were practically amorphous and exhibited 10%weight loss above 220℃.     

Synthesis and characterization of optically active polyamides based on 2-(1,3-isoindolinedione-2-yl)glutaric acid by direct polycondensation

<正>Five new optically active polyamides(PAs) 6a-6e were prepared by direct polycondensation reaction of 2-(1,3- isoindolinedione-2-yl)-glutaric acid 4 as a new chiral diacid with various aromatic diamines 5a-5e in a medium consisting of triphenyl phosphite(TPP),calcium chloride,pyridine(Py) and N-methyl-2-pyrrolidone(NMP).The polycondensation reaction produced a series of polyamids 6a-6e in quantitative yields with inherent viscosities of 0.26-0.39 dL/g.The resulting polymers were fully characterized by means of ~1H-NMR,FT-IR spectroscopy,elemental analysis,inherent viscosity and specific rotation.Thermal properties of these polymers were investigated using thermal gravimetric analysis (TGA) and differential thermal gravimetry(DTG).Phthalimide rings as a bulky pendent group in the polymer chains disturb the interchain and intrachain interactions and make these PAs readily soluble in polar,aprotic solvents such as N,N-dimethyl acetamide(DMAc),N,N-dimethyl formamide(DMF),dimethyl sulfoxide(DMSO),N-methyl-2-pyrrolidone(NMP) and sulfuric acid.     

A NEW ACTIVE DIESTER FOR SELECTIVE POLYMERIZATION TO FORM FUNCTIONAL POLYAMIDES

A new synthetic route to polyamides and hydroxyl polyamides was established, based on the selecting (?)-acylation of three novel typical active diesters: the active diester of N-hydroxy- (?) 4-epoxy-5-cyclohexene-2, 3-dicarboximide( HOEC), such as N, N'-(temphthaloyldioxy) bis(1, 4- epoxy - 5 - cyclohexene- 2, 3 - dicarboximide.) ( PBOEC), N, N'- ( isophthaloyl - dioxy) bis (1,4-epoxy-5-cyclohexene-2, 3-dicarboximide)(IPBOEC) and N, N' -(adipoyldioxy) his (1,4-epoxy-5-cyclohexene-2, 3-dicarboximide) ( ADOEC)with aliphatic diamines and 1,3-diamino-2-hydroxypropane. The polycondensation occurs at room temperature in solution without added catalyst. Dipolar aprotic solvents which include dimethyl sulfoxide, N- methyl - 2- pyrrolidone and dimethylformamide were used as solvents for polymerization. The selective N-acylation of two active diesters was performed as a model reaction study.     

4D-proteomics-based breast cancer progressionEI北大核心CSCD

：The occurrence and development of breast cancer go through multiple processes，and the protein molecular information in its evolution is intricate and complex. The 4D-proteomics technique was used to investigate the tumor progression of MMTV-PyMT transgenic mice. The results of protein identification and differential expression analysis showed that a total of 5819 proteins were identified in 4D-proteomics analysis and 5667 proteins were quantifiable. Compared with 3-week-old tumors，a total of 270 differentially expressed proteins were found in the 5-week-old tumors，while 255 proteins in the 7-week-old tumors. We also detected 23 of proteins （such as，Srpk11 and Tinagl1）with gradual up-regulation and 35 of proteins （such as，Pdgfrb， Col1a2 and Col1a1）with gradual down-regulation during the tumor progression，including 3-，5-and 7-weeks. We also performed bioinformatics analysis，including subcellular localization，GO function analysis and pathway enrichment analysis. The results showed that the biological processes（immune regulation and lipid metabolism） and enrichment pathways （metabolic pathway）involved in differentially expressed proteins remained the same during the tumor progression，but some cellular components and molecular functions changed，such as，protein locations were extracellular region and membrane in 5-weeks-old tumors as well as cytoplasm in 7-weeks-old tumors. And important protein functions were protein binding functions in 5-weeks-old tumors as well as nucleotide binding in 7-weeks-old tumors. The acquired protein biomarkers and pathways could help with the accurate exploration of molecular mechanisms of tumor progression，screening of molecular targets of breast cancer，and evaluation of personalized treatment programs. © 2023, Youke Publishing Co.,Ltd. All rights reserved.     

Synthesis of Dendronized Aromatic Polyamides with Chloromethyl Groups in the Periphery by Macromonomer Approach

The preliminary results for one-pot synthesis of dendronized aromatic polyamides with chloromethyl groups in the periphery by macromonomer approach were reported first time. The GPC analysis of the resulting dendronized polymers has shown typical weight average molecular weight (Mw) of 41554 and a polydispersity of 2.74.     

SYNTHESIS AND CHARACTERIZATION OF POLYBENZOTHIAZOLAMIDES

Aromatic polybenzothiazolamides were prepared by low temperature solution method by condensing the 2, 2'-diarnino-6, 6'-bibenzothiazole with four different acid chlorides in quantitative yield. These polymers were characterized by IR and NMR. Viscosities of these polyamides range from 0.42 to 1 dl/gm. All these polymers were stable upto 300℃in air.     

Synthesis Structure and Behavbr of Polymeric Drugs Covalently Linked 5-Fluorouracil

Four series of polymeric drugs with 5-Fluorouracil(5-FU) cova-lently linked in side chain were synthesized by the use of starch and carboxylmethylcellulose and two new 5-FU derivatives were also synthesized by using molecular sieve as a catalyst.Their structures were determined by IR,1H NMR and mass spectra.The changes in the Nitrogen content of polymeric drugs with reaction conditions and the influences of the N content on their limiting viscosity were studied.The hydrolysis of 5-FU from starch and carboxylmethylcellulose derivatives in various of buffer were researched by simulating physiologically acid-alkali enviroment.In addition,anticancer activity(in vivo and in vitro) of some starch derivative has been preliminaryly observed.     

Preparation and characterization of novel thermostable polyamides bearing different photoactive pendent architectures with antibacterial properties

Three diamine monomers with different derivatives of imidazole heterocyclic ring, aryl ethers and electron withdrawing trifluoromethyl groups in the backbone were synthesized and used in polycodensation reaction with various aliphatic and aromatic dicarboxylic acids for preparation of a series of novel polyamides(PAs). The PAs were obtained in high yields and possessed inherent viscosities in the range of 0.26-0.75 d L/g. All of the polymers were amorphous in nature,showed outstanding solubility and could be easily dissolved in amide-type polar aprotic solvents. They showed good thermal stability with glass transition temperatures between 162-302 ℃. Thermogravimetric analysis showed that all polymers were stable, with 10% weight loss recorded above 421 ℃ in N_2 atmospheres. All the PAs presented fluorescence upon irradiation with ultraviolet light and thus showed promise for applications in electroluminescent devices. The monomers and PAs were also screened for antibacterial activity against Gram positive and Gram negative bacteria.