大分子氮氧自由基的合成及其阻聚作用

<正> 近年来氮氧稳定自由基化合物已越来越引起人们的注意,但是带有四甲基哌啶氮氧自由基的高分子化合物的合成和应用仍然研究得不多,Keana等用甲基丙烯酰氧基氮氧自由基以格氏试剂引发聚合得到低分子量的氮氧自由基聚合物,或将聚甲基丙烯酰氯和四甲基哌啶醇的氮氧自由基反应而得到相应的氮氧自由基聚合物,Kurosaki等则使     

Linear polymers of vinyl aryl monomers containing another unsaturated group

The synthesis and the anionic polymerization of representative substituted styrenes, CH₂?CH? C₆H₄R′, where R′ is an ethylenic or acetylenic group attached directly or indirectly to the benzene ring, to linear polymers is described. In contrast, crosslinked polymers were obtained when radical and cationic initiators were used. The unpolymerized, unsaturated bonds in R′ in the resulting linear polymers were shown to be present by infrared spectroscopic methods and by the following post-reactions of these bonds: (1) the thermal- and radical-initiated crosslinking of the linear polymers through the unsaturated bonds in R′; (2) the post-bromination of these unsaturated bonds; (3) the post-copolymerization of these unsaturated bonds with vinyl monomers; and (4) the reaction of decaborane with the acetylenic bonds. The anionic copolymerizations of methyl methacrylate, acrylonitrile, and styrene with these monomers were performed and confirmed their behavior as substituted styrenes. Block copolymerizations with styrene and methyl methacrylate were also performed and the expected results obtained. Post-bromination of the linear polymers afforded self-extinguishing polymers. The linear polymers and copolymers may be classified as “self-reactive” polymers which yield thermosetting polystyrenes.     

Synthesis and characterization of optically active polyamides based on 2-(1,3-isoindolinedione-2-yl)glutaric acid by direct polycondensation

<正>Five new optically active polyamides(PAs) 6a-6e were prepared by direct polycondensation reaction of 2-(1,3- isoindolinedione-2-yl)-glutaric acid 4 as a new chiral diacid with various aromatic diamines 5a-5e in a medium consisting of triphenyl phosphite(TPP),calcium chloride,pyridine(Py) and N-methyl-2-pyrrolidone(NMP).The polycondensation reaction produced a series of polyamids 6a-6e in quantitative yields with inherent viscosities of 0.26-0.39 dL/g.The resulting polymers were fully characterized by means of ~1H-NMR,FT-IR spectroscopy,elemental analysis,inherent viscosity and specific rotation.Thermal properties of these polymers were investigated using thermal gravimetric analysis (TGA) and differential thermal gravimetry(DTG).Phthalimide rings as a bulky pendent group in the polymer chains disturb the interchain and intrachain interactions and make these PAs readily soluble in polar,aprotic solvents such as N,N-dimethyl acetamide(DMAc),N,N-dimethyl formamide(DMF),dimethyl sulfoxide(DMSO),N-methyl-2-pyrrolidone(NMP) and sulfuric acid.     

Synthesis and characterization of light‐emitting main‐chain metallo‐polymers containing bis‐terpyridyl ligands with various lateral substituents

A series of conjugated monomers ( 5a‐5d ) with various lateral substituents were symmetrically synthesized by the Sonogashira coupling reaction, in which central aromatic units (i.e. 9,9‐dipropylfluorenes) were linked to 2,2′:6′,2′‐terpyridyl (tpy) units via phenylene/ethynylene fragments. These light‐emitting monomers were further reacted with zinc(II) ions and subsequently anion exchanged to produce supramolecular main‐chain metallo‐polymers ( 6a‐6d ). The formation of polymers 6a‐6d was confirmed by the increased viscosities (up to 1.5–1.83 times) relative to those of their analogous monomers. The results of ¹H NMR titration and UV‐Vis spectral titration revealed a detailed complexation process of metallo‐polymers by varying the molar ratios of zinc(II) ions to monomers. After coordination with zinc(II) ions, the luminescent and thermal properties of the polymers were enhanced by the formation of metallo‐supramolecular structures in contrast to their monomer counterparts. PLED devices employing these metallo‐polymers as emitters gave yellow to orange electroluminescence (EL) emissions with turn‐on voltages around 6 V. The maximum power efficiency, external quantum yield, and brightness of the PLED device containing polymer 6c were 0.33 cd A^?1 (at 14 V), 1.02%, and 931 cd m^?2 (at 14 V), respectively. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3243–3255, 2007     

Liquid crystalline and photoactive poly[4,4′-stilbeneoxy]alkylbiphenylphosphates

A series of liquid crystalline and photoactive polymers were synthesized from biphenylphosphorodichloridate with various 4,4′-bis(m-hydroxyalkyloxy)stilbenes (m = 2, 4, 6, 8, 10) in chloroform by solution polycondensation method using an acid scavenger. The resultant polymers were characterized by inherent viscosity, FT-IR, ¹H, ¹³C and ³¹P NMR spectroscopies. The liquid crystalline (LC) properties were studied using HOPM and DSC and it was inferred that out of the five polymers synthesized, higher methylene chain containing polymers (m = 6, 8, 10) exhibited LC properties. Thermogravimetric analysis revealed that all the polymers were stable in between 290 and 367 °C and underwent degradation thereafter. The thermal stability and char yield of the polymers decreased with increase in flexible methylene chain. The photochemical properties of these polymers were investigated by UV and fluorescence spectroscopy. Crosslinking proceeds via 2π-2π cycloaddition reaction of the -CHCH- of the stilbene moieties. The rate of crosslinking increases with increase in methylene chain length in the polymer backbone. The fluorescence spectra showed that the longer methylene spacer containing polymers exhibited larger red-shifts than the shorter spacer containing polymers.     

SYNTHESIS AND PROPERTIES OF POLY-1,3,5-TRIAZINES

Two new polytriazines: poly[2-methyl-4, 6-(4,′4″-diphenylene)-1, 3, 5-triazine] (Ⅰ) and poly[2-phenyl-4, 6-(4′, 4″-diphenylene)-1, 3, 5-triazine] (Ⅱ) were synthesized from the solution condensation of biphenyl-4, 4′-diamidine dihydrochloride with acetic anhydride and biphenyl-4, 4′-diamidine with benzaldehyde respectively. These two polymers were characterized by TGA, DTA, elemental analysis and IR spectroscopy. They exhibited good thermal oxidative stability as shown by the fact that the powders of these polymers suffered 5.4%, 2.4% weight loss after isothermal aging in air at 300℃for 200 hours. The decomposition temperature of (Ⅱ) was 583℃in air and 590℃in N_2. These linear poly-1, 3, 5-triazines were soluble in concentrated sulfuric acid, phosphoric acid and trifluoroacetic acid whereas the erosslinked poly-1, 3, 5-triazines reported in the literature were insoluble and infusible.It is interesting that these polymers can form complexes with metal halides as determined by X-ray photoelectron spectroscopy (XPS). The polymer metal complex (Ⅲ). PdCl_2 possesses catalytic activity for hydrogenation.     

Synthesis and esterolytic reactions of linear and cross-linked asymmetric imidazole-containing polymers

Asymmetric linear and cross-linked imidazole-containing polymers were prepared from 1-[2(S)-methylbutyl]-4-vinylimidazole and 1-[2(S)-methylbutyl]-5-vinylimidazole. The esterolytic reactions of these linear and cross-linked asymmetric polymers with the enantiomeric substrates (R)- and (S)-4-(3-methylpentadecanoyl)-3-nitrobenzoic acid, (R)- and (S)-S, were studied by measuring the pseudo-first order kinetics of the solvolysis of these enantiomeric substrates in the presence of these asymmetric polymers. The linear homopolymers and copolymers of 1-[2(S)-methylbutyl]-4- and 5-vinylimidazole showed hydrophobic and electrostatic effects in the solvolysis of the enantiomeric substrates with these linear asymmetric polymers. Cross-links were introduced into these asymmetric polymers to increase the rigidity and reduce the number of conformations available to the polymer. The reduced conformational mobility was expected to enhance any enantioselectivity in the solvolysis of the enantiomeric substrates with these polymers. Using these cross-linked polymers, hydrophobic interactions were observed in the solvolysis of a series of substrates with increasing alkyl chain length. Also, on changing the polarity of the solvent, a bell-shaped rate profile was observed in the solvolysis of the long chain substrate S. This effect was attributed to a combination of the coiling of the cross-linked polymer chains and hydrophobic interactions with the substrate on changing solvent polarity. Even with the increased rigidity of these cross-linked polymers, no significant enantioselectivity in the solvolysis of the enantiomeric substrates was observed. So, neither the linear nor the cross-linked asymmetric polyvinylimidazoles showed enantioselectivity in the solvolysis of these enantiomeric substrates. In this case, the hydrophobic interactions and the reduced conformational mobility through crosslinking were not strong enough to bring about enantioselectivity in the solvolysis of these enantiomeric substrates.     

Novel photo-crosslinkable liquid crystalline polymers containing vanillylidene cycloalkanones and azobenzene units

Two series of novel liquid crystalline photo-crosslinkable bis(vanillylidene-azobenzene) cycloalkanone containing polymers, namely poly(vanillylidene alkyloxy-4,4'-azobenzenedicarboxylic ester)s, have been synthesised from bis[m-hydroxyalkyloxy(vanillylidene)cycloalkanone] (m = 6, 8, 10) with azobenzene dicarbonylchloride by solution polycondensation method at ambient temperature. Polymers with varying spacer lengths have been synthesised and characterised by spectroscopic techniques. These variations have been correlated with the thermal properties and transition temperatures. Thermal transitions were analysed by differential scanning calorimetry (DSC) and the mesophases were identified by hot stage optical polarised microscopy (HOPM). All of the polymers were found to exhibit liquid crystalline properties. Transition temperatures were observed to decrease with increasing spacer length. The thermogravimetric analysis reveals that all of the polymers were stable up to 280°C undergo two-stage decomposition. Using the UV-visible photolysis studies we investigated the simultaneous behaviour of reactivity rates of crosslinking in the vanillylidene unit and isomerisation caused by the azobenzene unit in the photo-crosslinkable main chain liquid crystalline polymers. The photolysis of liquid crystalline bis(vanillylidene)cycloalkanone-based polymers reveals that there are two kinds of photoreactions in these systems: the EZ photoisomerisation of azobenzene unit and 2p+2p addition by vanillylidene units. The EZ photoisomerisation in the liquid crystal phase disrupts the parallel stacking of the mesogens, resulting in the transition from the liquid crystal phase to isotropic phase. The photoreaction involving 2p+2p addition of the bis(vanillylidene)cycloalkanone units in the polymers results in the conjoining of the chains. The cyclopentanone polymers exhibited a faster rate of photolysis than the cyclohexanone polymers.     

Binding of methyl orange and the hydrophobic fluorescent probe, 2-p-toluidinylnaphthalene-6-sulfonate,by 2-dialkylaminoethyl methacrylate-N-vinyl-2-pyrrolidone and related copolymers

The copolymers of N-vinyl-2-pyrrolidone and 2-dimethylaminoethyl methacrylate, 2-diethylaminoethyl methacrylate, 2-dimethylaminoethyl acrylate, or 2-dimethylaminopropyl acrylamide have been prepared. Studies were made of the binding of a “binding probe,” methyl orange, by the copolymers in aqueous solution. The first binding constants accompanying the binding were evaluated. Furthermore, the intensity of fluorescence of a hydrophobic fluorescent probe, 2-p-toluidinylnaphthalene-6-sulfonate, in the presence of these polymers was investigated. The nature and phenomena of dye binding and hydrophobic fluorescent probe binding with the polymers are discussed.     

芳杂环二腈及其聚合物——Ⅵ.含5-氰基苯并噻唑环的二腈的合成及聚合

合成了下列三个含5-氰基苯并噻唑环的二腈:研究了它们的聚合反应并测定了所得聚合物的热氧化稳定性,结果表明皆与其结构相类似的含6-氰基苯并噻唑环的二腈相似。     

Synthesis of the first poly(diaminosulfide)s and an investigation of their applications as drug delivery vehicles

This paper reports the first examples of poly(diaminosulfide)s that were synthesized by the reaction of a sulfur transfer reagent and several secondary diamines. The diaminosulfide group has the general structure of R(2)N-S-NR(2) and, although it has been used in the synthesis of small molecules, it has never been utilized in the synthesis of macromolecules until this report. A series of poly(diaminosulfide)s were synthesized at elevated temperatures, and the molecular weights of the polymers were as high as 12,400 g mol(-1) with conversions for the polymerization reaction up to 99%. The rate constants for the transamination reactions that lead to the polymers were measured in several solvents to provide an understanding the reaction conditions necessary to polymerize the monomers. The degradation of diaminosulfides were studied in D(2)O, C(6)D(6), CD(3)OD, CDCl(3), and DMSO-d(6)/D(2)O to demonstrate that they were very stable in organic solvents but degraded within hours under aqueous conditions. These results clearly demonstrated that diaminosulfides are very stable in organic solvents under ambient conditions. Poly(diaminosulfide)s have sufficient stabilities to be useful for many applications. The ability of these polymers to function as drug delivery vehicles were studied by the fabrication of nanoparticles of a water-insoluble poly(diaminosulfide) with a dye. The microparticles were readily absorbed into human embryonic 293 cells and possessed no measureable toxicity towards these same cells.     

聚(茚并芴-三苯胺)的合成及性能

设计并合成了一类新的可用于有机场效应晶体管(OFET)的聚合物半导体材料聚(茚并芴-三苯胺)(pIFTPA1~4), 通过核磁共振谱和凝胶渗透色谱等对聚合物进行了表征, 同时对其场效应薄膜晶体管性能进行了测试. 结果表明, 这些聚合物形成了无定形半导体膜, 在空气中稳定, 其载流子迁移率远高于聚三苯胺(pTPA)类材料, 其中pIFTPA1载流子迁移率高达4×10^-2 cm²/(V·s), 开关比为10⁶.     

Development and application of latent hydrosilylation catalysts [2]—Control of catalytic activity of platinum catalyst by polystyrene derivatives having propargyl moieties

A new thermal latent hydrosilylation catalyst on the basis of H₂PtCl₆ and polystyrene derivatives having propargyl moieties is described. The polystyrene derivatives having various propargyl moieties were obtained by the reaction of propargyl alcohols with poly(p‐chloromethylstyrene) or its copolymer with styrene. The polymer‐supported platinum catalysts were prepared by aging H₂PtCl₆ with these polymers in tetrahydrofuran at 30 °C for 12 h. In the presence of the polymers, the hydrosilylation activity of H₂PtCl₆ was found to be controlled thermally in the model reaction of trimethylsilane and triethylvinylsilane. Effective control of the crosslinking reaction of silicone resin was also achieved by using these latent catalyst systems. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 35–42, 2000     

Novel photo‐crosslinkable liquid crystalline polymers containing vanillylidene cycloalkanones and azobenzene units

Two series of novel liquid crystalline photo‐crosslinkable bis(vanillylidene‐azobenzene) cycloalkanone containing polymers, namely poly(vanillylidene alkyloxy‐4,4′‐azobenzenedicarboxylic ester)s, have been synthesised from bis[m‐hydroxyalkyloxy(vanillylidene)cycloalkanone] (m = 6, 8, 10) with azobenzene dicarbonylchloride by solution polycondensation method at ambient temperature. Polymers with varying spacer lengths have been synthesised and characterised by spectroscopic techniques. These variations have been correlated with the thermal properties and transition temperatures. Thermal transitions were analysed by differential scanning calorimetry (DSC) and the mesophases were identified by hot stage optical polarised microscopy (HOPM). All of the polymers were found to exhibit liquid crystalline properties. Transition temperatures were observed to decrease with increasing spacer length. The thermogravimetric analysis reveals that all of the polymers were stable up to 280°C undergo two‐stage decomposition. Using the UV–visible photolysis studies we investigated the simultaneous behaviour of reactivity rates of crosslinking in the vanillylidene unit and isomerisation caused by the azobenzene unit in the photo‐crosslinkable main chain liquid crystalline polymers. The photolysis of liquid crystalline bis(vanillylidene)cycloalkanone‐based polymers reveals that there are two kinds of photoreactions in these systems: the EZ photoisomerisation of azobenzene unit and 2p+2p addition by vanillylidene units. The EZ photoisomerisation in the liquid crystal phase disrupts the parallel stacking of the mesogens, resulting in the transition from the liquid crystal phase to isotropic phase. The photoreaction involving 2p+2p addition of the bis(vanillylidene)cycloalkanone units in the polymers results in the conjoining of the chains. The cyclopentanone polymers exhibited a faster rate of photolysis than the cyclohexanone polymers.     

AB_2型星形杂臂偶氮液晶聚合物的合成及表征

通过原子转移自由基聚合(ATRP)与ATRP衍生物化学修饰结合的方法,合成了一系列AB2型星形杂臂偶氮液晶聚合物.其中,A为聚苯乙烯,B为聚6-[4-(4′-甲氧基苯基)偶氮苯氧基己酯](PMMAZO).合成分三步进行.首先,以ATRP方法得到ω-溴聚苯乙烯活性链PS(Br).然后对PS(Br)进行化学改性,得到带两个末端溴原子的聚苯乙烯活性链PS(Br)2·最后,以PS(Br)2作为双官能团大分子引发剂,引发6-[4-(4′-甲氧基苯基)偶氮苯氧基]己酯(MMAZO)发生ATRP聚合,得到星形杂臂PS(PMMAZO)2聚合物.进一步对聚合产物进行了GPC和1H-NMR分析.结果表明合成产物是预期的星形杂臂聚合物,产物分子量可控且分子量分布狭窄.同时,以DSC和POM表征了星形杂臂聚合物的液晶性.     

一系列新的席夫碱型液晶高分子冠醚的合成与表征

以 4,4′ (α,ω 烷亚甲基二酰氧 )二苯甲醛和二氨基二苯并 1 5 冠 5为单体 ,采用溶液缩聚方法 ,合成了一类新的席夫碱型液晶高分子冠醚 .一种单体采用脂族二酰氯和对羟基苯甲醛反应制备 ,另一种新的单体采用二硝基二苯并 1 5 冠 5 ,在钯 碳催化剂存在下 ,水合肼还原制备 .合成的二硝基和二氨基 二苯并 1 5 冠 5 ,未能从IR和1 H NMR谱图上区分它们的几何异构体 .聚合物的分子量不高 ,Mn 在 1 0 1 0 0～ 1 3 0 0 0之间 .单体的结构通过元素分析、IR、1 H NMR和MS等方法确证 .聚合物的性质采用GPC、DSC、TG和POM等方法进行了研究 .发现所有的聚合物加热到各自的熔融温度 (Tm)以上都能形成液晶态 ,在液晶态可以观察到向列相的丝状织构和纹影织构 .聚合物的玻璃化转变温度 (Tg)、熔融温度和各向同性温度 (Ti)随聚合物分子中柔性间隔基的变化而变化 ,它们有较高的清亮点温度和宽的液晶态温度范围 .WAXD的研究进一步证实了聚合物的液晶性     

Synthesis and phase behaviors of side‐chain liquid‐crystalline polymers containing azobenzene mesogen with the different length alkyl tail

A series of side‐chain liquid‐crystal polymers, poly[6‐[4‐(4′‐n‐alkyl benzoateazo)phenoxy]‐hexylmethacrylate]s (PMAzoCOOR_m, m = 1, 2, 3, 4, 5, 6, 8, 10, 14, and 18) have been prepared by two synthetic methods. The chemical structure of the monomers was confirmed by ¹H NMR and mass spectrometry. The molecular characterizations of the polymers were performed with ¹H NMR and gel permeation chromatograph. The phase behaviors of polymers were investigated by the combination of techniques including differential scanning calorimetry, polarized optical microscopy, and small‐angle X‐ray scattering. For m = 1, 2, 3, 4, 5, and 6, the polymers exhibited a monosmectic A phase in which the smectic layer period was almost identical to the side‐chain length. In addition, for m = 2, 3, 4, and 5, they presented the monosmectic C phase in low temperature; moreover, the tilt angle increased from 23.3 to 40.5°. For m = 8, 10, 14, and 18, the polymers showed a bilayer smectic A phase in which the layer spacing was larger than a fully extended side chain but less than two extended chains. On the other hand, for the clearing point, with the increasing of m, it first decreased, and then increased. All of these indicated that the length of alkyl tails played an important role in the phase behaviors of these polymers. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2759–2768     

Substitution and elimination reactions of poly(epichlorohydrin) and poly(2-chloroethyl vinyl ether) using phase transfer catalysis

The reactions of poly(epichlorohydrin) (PECH) and poly(2-chloroethyl vinyl ether) (PCEVE) with various reagents were investigated using phase transfer catalyst (PTC) such as tetra-n-butylammonium bromide (TBAB), 18-crown-6 (CR6), and dicyclohexyl-18-crown-6 (DCHC) is a solid—liquid two-phase system. Although the reactions of these polymers hardly occurred without PTC in nonpolar solvents such as toluene and diglyme under mild conditions, the addition of PTC caused the reactions to proceed smoothly under the same conditions. In addition, the reactions of PECH and PCEVE with a strong base such as potassium hydroxide proceeded selectively through β-elimination reaction to produce the polymers with pendant vinyl groups. These results suggested this method is useful for the syntheses of functional polymers. On the other hand, it turned out that quaternary ammonium salts such as TBAB have higher catalytic activity than crown ethers such as CRG and DCHE in these reactions. Furthermore, the catalytic activity of quaternary ammonium salts was strongly influenced by their chain length and the structure of the polymers.     

Functional macrocyclic polysulfones via aminomethylpolysulfone

Amidoalkylation of polysulfone (PS) with N-chloromethylphthalimide (CMPi) to polymer 2/2a (PiPs), followed by hydrazinolysis of PiPs in CHCl₃ with neat N₂H₄ + H₂O (RT 3 days) to aminomethylpolysulfone ( 3 , AMPS). Condensation of AMPS with 4-chlorosulfonylbenzo-18-crown-6 produced B18C6AMPS. Okawara-type condensations with diglycydyl glycols ( 5 ) led to azacrown polysulfone polymers 6d , and polystyrene azacrown polymers 6a–6c . Products were characterized by 270 MHz ¹H-NMR, thermogravimetric (TGA) and DSC analysis. Insoluble aminomethylpolystyrene beads were used as model supports to study the Okawara-type reaction with diglycydyl ethers and the products showed thermoregulated complexation of alkali salts on polymers 6b and 6c. Polysulfone membranes were prepared from B18C6AMPS and transport of K⁺ in a liquid membrane-type experiment was demonstrated.     

Assembling of dimeric entities of Cd(II) with 6-mercaptopurine to afford one-dimensional coordination polymers: synthesis and scanning probe microscopy characterization

The direct reaction between 6-mercaptopurine (6-MP) and Cd(II) under different conditions yields either [Cd2(6-MP)4(NO3)2](NO3)2 (1) or [Cd(6-MP-)2.2H2O]n (4). Compound 1 behaves as the building block of the polymer [Cd(6-MP2-)2]n[Ca(H2O)6]n (3), by deprotonation of 6-MP ligand. In the reaction of 1 to give 3, the dinuclear compound [Cd2(6-MP)4(H2O)2](NO3)4.2H2O (2) can be isolated as an intermediate. Polymers 3 and 4 convert into each other in water via deprotonation-protonation reactions. The structures of compounds 1-3 have been determined by X-ray diffraction. Given the small differences in the arrangement shown in the crystal structures of the polymer 4 and the polyanion of 3, the stabilities and energetics of the two arrangements have been examined by DFT calculations to determine the possibility of identifying new conformations of both polymers. In addition, the two polymers have been characterized on surfaces by means of AFM. The direct reaction between 6-MP and Cd(II) and the deprotonation of the polymer 4 have proven to be useful routes for the isolation of one-dimensional systems on surfaces. The development of new strategies to characterize these types of polymers on surfaces opens the possibility to perform nanoscale studies on their properties and their potential use as nanomaterials.