Kinetics and mechanism of the reduction of monochloramine by hydroxylamine and hydroxylammonium ion

The kinetics and mechanism by which monochloramine is reduced by hydroxylamine in aqueous solution over the pH range of 5–8 are reported. The reaction proceeds via two different mechanisms depending upon whether the hydroxylamine is protonated or unprotonated. When the hydroxylamine is protonated, the reaction stoichiometry is 1:1. The reaction stoichiometry becomes 3:1 (hydroxylamine:monochloramine) when the hydroxylamine is unprotonated. The principle products under both conditions are Cl^–, NH⁺₄, and N₂O. The rate law is given by ?[d[NH₂Cl]/dt] = k₊[NH₃OH⁺][NH₂Cl] + k₀[NH₂OH][NH₂Cl]. At an ionic strength of 1.2 M, at 25°C, and under pseudo‐first‐order conditions, k₊= (1.03 ± 0.06) ×10³ L · mol^?1 · s^?1 and k₀=91 ± 15 L · mol^?1 · s^?1. Isotopic studies demonstrate that both nitrogen atoms in the N₂O come from the NH₂OH/NH₃OH⁺. Activation parameters for the reaction determined at pH 5.1 and 8.0 at an ionic strength of 1.2 M were found to be ΔH? = 36 ± 3 kJ · mol^–1 and Δ S? = ?66 ± 9 J · K^?1 · mol^?1, and Δ H? = 12 ± 2 kJ · mol^?1 and Δ S? = ?168 ± 6 J · K^?1 · mol^?1, respectively, and confirm that the transition states are significantly different for the two reaction pathways. © 2005 Wiley Periodicals, Inc. Int J Chem Kinet 38: 124–135, 2006     

A Highly Selective and Sensitive Fluorescent Probe Recognition for Co2+ in Aqueous Media Based on 8‐Hydroxyquinolin‐2‐carbaldehyde‐2‐pyridylformylhydrazone Derivative

A new (8‐hydroxyquinolin‐2‐yl)methylene picolinohydrazide derivative ( L ) has been successfully synthesized and characterized. The probe L displays high selectivity to Co²⁺ in CH₃CN/HEPES (1:1, Ｖ/Ｖ, 10 mmol·L^?1, pH=7.4) with a fluorescence "ON‐OFF" response. The Co²⁺ ion recognition event possesses some distinct features including rapid response, high selectivity and sensitivity, good anti‐interference ability and being applicable within a wide pH range. Based on job's plot and ESI‐MS studies, the 1:1 binding mode was proposed. The binding constant of L and Co²⁺ is 1.63×10⁸ L·mol^?1 and the detection limit is 1.15 µmol·L^?1. Natural water samples experiments revealed that probe L can be potentially applied to the detection of Co²⁺ in real environment.     

KINETICS OF FORMATION AND STABILITY CONSTANTS OF MONO AND BIS l-TYROSINE COMPLEXES OF Cu(II), Co(II), AND Ni(II)

Abstract

The kinetics and stability constants of l-tyrosine complexation with copper(II), cobalt(II) and nickel(II) have been studied in aqueous solution at 25° and ionic strength 0.1 M. The reactions are of the type M(HL)^(3-n)+ _n-1 + HL- ? M(HL)^(2-n)+_n(k_n, forward rate constant; k_-n, reverse rate constant); where M=Cu, Co or Ni, HL^? refers to the anionic form of the ligand in which the hydroxyl group is protonated, and n=1 or 2. The stability constants (K_n=k_n/k_-n) of the mono and bis complexes of Cu²⁺, Co²⁺ and Ni²⁺ with l-tyrosine, determined by potentiometric pH titration are: Cu²⁺, log K₁=7.90 ± 0.02, log K₂=7.27 ± 0.03; Co²⁺, log K₁=4.05 ± 0.02, log K₂=3.78 ± 0.04; Ni²⁺, log K₁=5.14 ± 0.02, log K₂=4.41 ± 0.01. Kinetic measurements were made using the temperature-jump relaxation technique. The rate constants are: Cu²⁺, k₁=(1.1 ± 0.1) × 10⁹ M ^?1 sec^?1, k_-1=(14 ± 3) sec^?1, k₂=(3.1 ± 0.6) × 10⁸ M ^?1 sec^?1, k^?2=(16 ± 4) sec^?1; Co²⁺, k₁=(1.3 ± 0.2) × 10⁶ M ^?1 sec^?1, k_-1=(1.1 ± 0.2) × 10² sec^?1, k₂=(1.5 ± 0.2) × 10⁶ M ^?1 sec^?1, k_-2=(2.5 ± 0.6) × 10² sec^?1; Ni²⁺, k₁=(1.4 ± 0.2) × 10⁴ M ^?1 sec^?1, k_-1=(0.10 ± 0.02) sec^?1, k₂=(2.4 ± 0.3) × 10⁴ M ^?1 sec^?1, k_-2=(0.94 ± 0.17) sec^?1. It is concluded that l-tyrosine substitution reactions are normal. The presence of the phenyl hydroxyl group in l-tyrosine has no primary detectable influence on the forward rate constant, while its influence on the reverse rate constant is partially attributed to substituent effects on the basicity of the amine terminus.     

Kinetics of the mercury(II)‐catalyzed substitution of coordinated cyanide ion in hexacyanoruthenate(II) by nitroso‐R‐salt

The kinetics and mechanism of Hg²⁺‐catalyzed substitution of cyanide ion in an octahedral hexacyanoruthenate(II) complex by nitroso‐R‐salt have been studied spectrophotometrically at 525 nm (λ_max of the purple‐red–colored complex). The reaction conditions were: temperature = 45.0 ± 0.1°C, pH = 7.00 ± 0.02, and ionic strength (I) = 0.1 M (KCl). The reaction exhibited a first‐order dependence on [nitroso‐R‐salt] and a variable order dependence on [Ru(CN)₆^4?]. The initial rates were obtained from slopes of absorbance versus time plots. The rate of reaction was found to initially increase linearly with [nitroso‐R‐salt], and finally decrease at [nitroso‐R‐salt] = 3.50 × 10^?4 M. The effects of variation of pH, ionic strength, concentration of catalyst, and temperature on the reaction rate were also studied and explained in detail. The values of k₂ and activation parameters for catalyzed reaction were found to be 7.68 × 10^?4 s^?1 and E_a = 49.56 ± 0.091 kJ mol^?1, ΔH^≠ = 46.91 ± 0.036 kJ mol^?1, ΔS^≠ = ?234.13 ± 1.12 J K^?1 mol^?1, respectively. These activation parameters along with other experimental observations supported the solvent assisted interchange dissociative (I_d) mechanism for the reaction. © 2008 Wiley Periodicals, Inc. Int J Chem Kinet 41: 215–226, 2009     

4-硝基苯甲醇的低温热容和标准摩尔生成焓

用精密自动绝热量热计测定了4-硝基苯甲醇（4-NBA）在78 ~ 396 K温区的摩尔热容。其熔化温度、摩尔熔化焓及摩尔熔化熵分别为:(336.426 ± 0.088) K, (20.97 ± 0.13) kJ×mol-1 和 (57.24 ± 0.36) J×K-1×mol-1.根据热力学函数关系式,从热容值计算出了该物质在80 ~ 400 K温区的热力学函数值 [HT - H298.15 K] 和[ST - S298.15 K]. 用精密氧弹燃烧量热计测定了该物质在T＝298.15 K的恒容燃烧能和标准摩尔燃烧焓分别为 (C7H7NO3, s)＝- ( 3549.11 ± 1.47 ) kJ×mol-1 和 (C7H7NO3, s)＝- ( 3548.49 ± 1.47 ) kJ×mol-1. 利用标准摩尔燃烧焓和其他辅助热力学数据通过盖斯热化学循环, 计算出了该物质标准摩尔生成焓 (C7H7NO3, s)＝- (206.49 ± 2.52) kJ×mol-1 .     

八肋游仆虫中心蛋白N-端半分子与Tb3+，Ca2+的结合

用分子生物学方法表达、纯化了游仆虫中心蛋白及N-端半分子，用铽荧光探针法、离子竞争法研究了pH 7.4，0.01 mol· L^-1 Hepes条件下中心蛋白与铽、钙的结合性质。结果表明中心蛋白有4个铽结合部位，其中2个为高亲合结合部位、2个为低亲合结合部位。具有2个低亲合结合部位的中心蛋白半分子与铽结合的条件常数是(2.13±0.10)×10⁵ L·mol^-1，与钙结合的条件常数是(7.52±0.02)×10² L·mol^-1。     

Kinetic and Mechanisms of the Homogeneous,Unimolecular Elimination of Phenyl Chloroformate and p‐Tolyl Chloroformate in the Gas Phase

The gas‐phase elimination of phenyl chloroformate gives chlorobenzene, 2‐chlorophenol, CO₂, and CO, whereasp‐tolyl chloroformate produces p‐chlorotoluene and 2‐chloro‐4‐methylphenol CO₂ and CO. The kinetic determination of phenyl chloroformate (440–480^oC, 60–110 Torr) and p‐tolyl chloroformate (430–480°C, 60–137 Torr) carried out in a deactivated static vessel, with the free radical inhibitor toluene always present, is homogeneous, unimolecular and follows a first‐order rate law. The rate coefficient is expressed by the following Arrhenius equations: Phenyl chloroformate: Formation of chlorobenzene, log k_I = (14.85 ± 0.38) – (260.4 ± 5.4) kJ mol^?1 (2.303RT)^?1; r = 0.9993 Formation of 2‐chlorophenol, log k_II = (12.76 ± 0.40) – (237.4 ± 5.6) kJ mol^?1(2.303RT)^?1; r = 0.9993 p‐Tolyl chloroformate: Formation of p‐chlorotoluene: log k_I = (14.35 ± 0.28) – (252.0 ± 1.5) kJ mol^–1 (2.303RT)^?1; r = 0.9993 Formation of 2‐chloro‐4‐methylphenol, log k_II = (12.81 ± 0.16) – (222.2 ± 0.9) kJ mol^?1(2.303RT)^–1; r = 0.9995 The estimation of the k_I values, which is the decarboxylation process in both substrates, suggests a mechanism involving an intramolecular nucleophilic displacement of the chlorine atom through a semipolar, concerted four‐membered cyclic transition state structure; whereas the k_II values, the decarbonylation in both substrates, imply an unusual migration of the chlorine atom to the aromatic ring through a semipolar, concerted five‐membered cyclic transition state type of mechanism. The bond polarization of the C–Cl, in the sense C^{δ+ …} Cl^δ?, appears to be the rate‐determining step of these elimination reactions.     

Data on the thermochemistry of azoalkanes

The rate constant of the primary decomposition step was determined for four symmetrical and four unsymmetrical azoalkanes. From the experimental activation energies and some literature enthalpy data, the following enthalpies of formation of radicals and group contributions were calculated: ΔH_? (CH₃N₂) = 51.5 ± 1.8 kcal mol^?1, ΔH_? (C₂H₅N₂) = 44.8 ± 2.5 kcal mol^?1, ΔH_? (2?C₃H₇N₂) = 37.9 ± 2.2 kcal mol^?1, [N_A-(C)] = 27.6 ± 3.7 kcal mol^?1, [N_A-(?_A) (C)] = 61.2 ± 3.1 kcal mol^?1.     

Kinetic Studies on the Reaction of Sodium Hexacyanoferrate（ll） Complex with Peroxydisulfate Anion

The oxidation of Na₄Fe(CN)₆ complex by S₂O anion was found to follow an outer‐sphere electron transfer mechanism. We firstly carried out the reaction at pH=1. The specific rate constants of the reaction, k_ox, are (8.1±0.07)×10^?2 and (4.3±0.1)×10^?2 mol^?1·L·s^?1 at μ=1.0 mol·L^?1 NaClO₄, T=298 K for pH=1 (0.1 mol·L^?1 HCl0₄) and 8, respectively. The activation parameters, obtained by measuring the rate constants of oxidation 283–303 K, were ΔH^≠=(69.0±5.6) kJ·mol^?1, ΔS^≠=(?0.34±0.041)×10² J·mol^?1·K^?1 at pH=l and ΔH^≠=(41.3±5.5) kJ·mol^?1, ΔS^≠=(?1.27±0.33)×10² J·mol^?1·K^?1 at pH=8, respectively. The cyclic voltammetry of Fe(CN) shows that the oxidation is a one‐electron reversible redox process with E_1/2 values of 0.55 and 0.46 V vs. normal hydrogen electrode at μ=1.0 mol·L^?1 LiClO₄, for pH=1 and pH=8 (Tris). respectively. The kinetic results were discussed on the basis of Marcus theory.     

The Kinetics of Ferrocene Volatilisation from an Ionic Liquid

The volatilisation of ferrocene (Fc), dissolved in the ionic liquid N‐butyl‐N‐methylpyrrolidinium bis(trifluoromethylsulfonyl)imide, [C₄mpyrr][NTf₂], to the gas phase has been indirectly monitored by cyclic voltammetry and chronoamperometry. Simulation of the observed trends in concentration with time using a simple model allowed quantification of the process. Volatilisation of dissolved Fc under flowing wet and dry dinitrogen gas (N₂) was found to be kinetically limited with a rate constant in the region of 2×10^?7 cm s^?1. The activation energy of diffusion for Fc was found to be 28.2±0.7 kJ mol^?1, while the activation energy of volatilisation of Fc from [C₄mpyrr][NTf₂] to dry N₂ was found to be 85±2 kJ mol^?1.     

二元无机物标准熵 So298的拓扑研究

为了预测二元无机物的标准熵,基于分子图的连接矩阵和离子参数gi、qi,提出了一种新的连接性指数mQ, mG及其逆指数mQ’, mG’。 qi、gi定义为：qi=(1.1+Zi1.1) /(1.7+ni), gi=(1.4+Zi) /(0.9+ri+ri-1),其中Zi 、ni和 ri分别代表离子i的电荷数、最外层主量子数和半径。从0Q, 0Q’, 1G,和1G’,利用多元线性回归分析方法和人工神经网络方法,可以构建优良的QSPR模型。对371个二元无机物,其多元线性模型及神经网络模型的相关系数、标准偏差和平均绝对偏差分别是：0.9905, 8.29 J.K-1.mol-1, 6.48 J. K-1.mol-1, 0.9960, 5.37 J.K-1.mol-1 和 3.90 J.K-1.mol-1。留一法交叉验证表明,其多元线性模型具有良好的稳定性。两个模型对187个未进入模型的二元无机物的标准熵的预测值和实验值之间的相关系数、标准偏差和平均绝对偏差分别是：0.9897, 8.64 J. K-1.mol-1, 6.84 J. K-1.mol-1, 0.9957, 5.63 J.K-1.mol-1, 和 4.18 J.K-1.mol-1。研究表明,本文方法在预测二元无机物标准熵时比文献方法更有效,两种模型均能较精确的预测二元无机物的标准熵,且神经网络模型的预测结果更精确。     

Preparation and Diels-Alder Reactivity of 2,3,5,6,7,8-Hexamethylidenebicyclo [2.2.2]octane (‘[2.2.2]Hericene’). Force-field calculations of exocyclic dienes as a moiety of bicyclic skeletons

The [2.2.2]hericene ( 6 ), a bicyclo[2.2.2]octane bearing three exocyclic s-cis-butadiene units has been prepared in eight steps from coumalic acid and maleic anhydride. The hexaene 6 adds successively three mol-equiv. of strong dienophiles such as ethylenetetracarbonitrile (TCE) and dimethyl acetylenedicarboxylate (DMAD) giving the corresponding monoadducts 17 and 20 (k₁), bis-adducts 18 and 21 (k₂) and tris-adducts 19 and 22 (k₃), respectively. The rate constant ratio k₁/k₂ is small as in the case of the cycloadditions of 2,3,5,6-tetramethylidene-bicyclo [2.2.2]octane ( 3 ) giving the corresponding monoadducts 23 and 27 (k₁) and bis-adducts 25 and 29 (k₂) with TCE and DMAD, respectively. Constrastingly, the rate constant ratio k₂/k₃ is relatively large as the rate constant ratio k₁/k₂ of the Diels-Alder additions for 5,6,7,8-tetramethylidenebicyclo [2.2.2]oct-2-ene ( 4 ) giving the corresponding monoadducts 24 and 28 (k₁) and bis-adducts 26 and 30 (k₂). The following second-order rate constants (toluene, 25°) and activation parameters were obtained for the TCE additions: 3 +TCE→ 23 : k₁ = 0.591±0.012 mol^?1·l·s^?1, ΔH^≠=10.6±0.4 kcal/mol, and ΔS^≠ = ?24.0±1.4 cal/mol·K (e.u.); 23 +TCE→ 25 : k₂=0.034±0.0010 mol^?1·l·s^?1, ΔH^≠ = 10.6±0.6 kcal/mol, and ΔS^≠ = ?29.7±2.0 e.u.; 4 +TCE→ 26 : k₁ = 0.172±0.035 mol^?1·l·s^?1, ΔH^≠ 11.3±0.8 kcal/mol, and ΔS^≠ = ?24.0±2.8 e.u.; 24 +TCE→ 26 : k₂ = (6.1±0.2)·10^?4 mol^?1·l·s^?1, ΔH^≠ = 13.0±0.3 kcal/mol, and ΔS^≠ = ?29.5±0.8 e.u.; 6 +TCE→ 17 : k₁ = 0.136±0.002 mol^?1·l·s^?1, ΔH^≠ = 11.3±0.2 kcal/mol, and ΔS^≠ = ?24.5±0.8 e.u.; 17 +TCE→ 18 : k₂ = 0.0156±0.0003 mol^?1·l·s^?1, ΔH^≠ = 10.9±0.5 kcal/mol, and ΔS^≠ = ?30.1 ± 1.5 e.u.; 18 +TCE→ 19 : k₃=(5±0.2) · 10^?5 mol^?1 mol^?1 ·l·s^?1, ΔH^≠ = 15±3 kcal/mol, and ΔS^≠ = ?28 ± 8 e.u. The following rate constants were evaluated for the DMAD additions (CD₂Cl₂, 30°): 6 +DMAD→ 20 : k₁ = (10±1)·10^?4 mol^?1 · l·s^?1; 20 +DMAD→ 21 : k₂ = (6.5±0.1) · 10^?4 mol^?1 ·l·^?1; 21 +DMAD→ 22 : k₃ = (1.0±0.1) · 10^?4 mol^?1 ·l·s^?1. The reactions giving the barrelene derivatives 19, 22, 26 and 30 are slower than those leading to adducts that are not barrelenes. The former are estimated less exothermic than the latter. It is proposed that the Diels-Alder reactivity of exocyclic s-cis-butadienes grafted onto bicycle [2.2.1]heptanes and bicyclo [2.2.2]octanes that are modified by remote substitution of the bicyclic skeletons can be affected by changes inthe exothermicity of the cycloadditions, in agreement with the Dimroth and Bell-Evans-Polanyi principle. Force-field calculations (MMPI 1) of 3, 4, 6 and related exocyclic s-cis-butadienes as a moiety of bicyclo [2.2.2]octane suggested single minimum energy hypersurfaces for these systems (eclipsed conformations, planar dienes). Their flexibility decreases with the degree of unsaturation of the bicyclic skeleton. The effect of an endocyclic double bond is larger than that of an exocyclic diene moiety.     

Kinetics of nucleophilic attack on coordinated organic moieties : XII. Addition of triphenylphosphine to [(C8H11)Co(C5H5)]BF4

A stopped-flow investigation of the reversible addition of Ph₃P to [(C₈H₁₁)Co(C₅H₅)]⁺ indicates the rate law, k_obs = k₁[Ph₃P] + k_?1. The low Δ2 of 21.0 ± 1.2 kJ mol^?1 and the negative ΔS2 of ?114 ± 5 J K^?1 mol^?1 are consistent with rapid addition to the enyl ligand. The higher Δ2 of 86.2 ± 5.1 kJ mol^?1 and the positive ΔS2 of +60 ± 17 J K^?1 mol^?1are as expected for the reverse dissociation. Preliminary studies show that the related complex [(C₇H₉)Co(C₅H₅)]⁺ is at least 65 times more electrophilic towards Ph₃P.     

Preparation and Thermal Chemical Property of Complexes of Zinc Nitrate with Trytophan

IntroductionZincisanessentialtraceelementtothelife .Manydiseasesarousedfromadeficiencyofzincelementhavere ceivedconsiderableattention .L α Aminoacidsarebasicunitsofproteins .L α Trytophanisoneoftheeightspeciesofaminoacidsindispensableforlife ,whichhastobeab sorbedfromfoodbecauseitcannotbesynthesizedinthehumanbody .InviewofthecomplexesofL α trytophanandessentialelementsasaddictiveswidelyusedinsuchfieldsasfoodstuff,medicineandcosmetic ,1 3theyhaveabroadenprospectforapplications .Briefly ,ab…     

2-氯-N,N-二甲基尼古丁酰胺的热容和热力学性质研究

Low-temperature heat capacities of 2-chloro-N,N-dimethylnicotinamide were precisely measured with a high-precision automated adiabatic calorimeter over the temperature range from 82 K to 380 K. The compound was observed to melt at （342.15±0.04） K. The molar enthalpy AfusionHm, and entropy of fusion, △fusionSm, as well as the chemical purity of the compound were determined to be （21387±7） J·mol^-1, （62.51±0.01） J·mol^-1·K^-1, （0.9946±0.0005） mass fraction, respectively. The extrapolated melting temperature for the pure compound obtained from fractional melting experiments was （342.25±0.024） K. The thermodynamic function data relative to the reference temperature 298.15 K were calculated based on the heat capacity measurements in the temperature range from 82 to 325 K. The thermal behavior of the compound was also investigated by different scanning calorimetry.     

Crystal Structure, Lattice Energy, and Standard Molar Enthalpy of Formation of the Complex (C11H18NO)2CuCl4(s)

The complex (C₁₁H₁₈NO)₂CuCl₄ (s), which may be a potential effective drug, was synthesized. X‐ray crystallography, elemental analysis, and chemical analysis were used to characterize the structure and composition of the complex. Lattice energy and ionic radius of the anion of the complex were derived from the crystal data of the title compound. In addition, a reasonable thermochemical cycle was designed, and standard molar enthalpies of dissolution for reactants and products of the synthesis reaction of the complex were measured by an isoperibol solution‐reaction calorimeter. The enthalpy change of the reaction was calculated to be Δ_rH^?_m=(2.69±0.02) kJ·mol^?1 from the data of the above standard molar enthalpies of dissolution. Finally, the standard molar enthalpy of formation of the title compound was determined to be Δ_rH^?_m[(C₁₁ H₁₈NO)₂CuCl₄, s]= ? (1822.96±6.80) kJ·mol^?1 in accordance with Hess law.     

Initiator efficiency of 2,2′‐azobis(isobutyronitrile) in bulk dodecyl acrylate free‐radical polymerizations over a wide conversion and molecular weight range

An Erratum has been published for this article in J. Polym. Sci. Part A: Polym. Chem. (2004) 42(21) 5559 . The initiator efficiency, f, of 2,2′‐azobis(isobutyronitrile) (AIBN) in dodecyl acrylate (DA) bulk free‐radical polymerizations has been determined over a wide range of monomer conversion in high‐molecular‐weight regimes (M_n ? 10⁶ g mol^?1 [? 4160 units of DA)] with time‐dependent conversion data obtained via online Fourier transform near infrared spectroscopy (FTNIR) at 60 °C. In addition, the required initiator decomposition rate coefficient, k_d, was determined via online UV spectrometry and was found to be 8.4 · 10^?6 s^?1 (±0.5 · 10^?6 s^?1) in dodecane, n‐butyl acetate, and n‐dodecyl acetate at 60 °C. The initiator efficiency at low monomer conversions is relatively low (f = 0.13) and decreases with increasing monomer to polymer conversions. The evolution of f with monomer conversion (in high‐molecular‐weight regimes), x, at 60 °C can be summarized by the following functionality: f^{60 °C} (x) = 0.13–0.22 · x + 0.25 · x² (for x ≤ 0.45). The reported efficiency data are believed to have an error of >50%. The ratio of the initiator efficiency and the average termination rate coefficient, 〈k_t±, (f/〈k_t〉) has been determined at various molecular weights for the generated polydodecyl acrylate (M_n = 1900 g mol^?1 (? 8 units of DA) up to M_n = 36,500 g mol^?1 (? 152 units of DA). The (f/〈k_t〉) data may be indicative of a chain length‐dependent termination rate coefficient decreasing with (average) chain length. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5170–5179, 2004     

Apo‐CopC and CopC‐Cu(II) Unfolding Characteristics in GuHCl Solution

The stability of CopC, a copper resistant protein with a Greek β‐barrel motif, in GuHCl solution was investigated by fluorescence spectra. Parameter A, characterizing position and shape of the fluorescence spectra, "phase diagram" method of fluorescence, and cupric binding capacity in GuHCl solution of different concentration showed that the denaturation transition of apo‐CopC and CopC‐Cu(II) might be fitted to a simple two‐state model. According to a two‐state model, the free energy of stabilization for apo‐CopC and CopC‐Cu(II), (17.08±0.35) and (23.81±0.45) kJ·mol^‐1 respectively, was obtained. Copper(II) increased the stability of apo‐CopC. The higher thermodynamics stability of CopC‐Cu(II) was revealed to originate in both the faster folding and the slower unfolding rates by unfolding kinetics.     

Synthesis,Characterization and Thermodynamic Study of the Solid State Coordination Compound Ni(Nic)2·H2O(s)(Nic=Nicotinate)

A novel compound‐monohydrated nickel nicotinate was synthesized by the method of room temperature solid phase synthesis and ball grinder. FTIR, chemical and elemental analysis, TG/DTG, and X‐ray powder diffraction technique were applied to characterize the structure and composition of the coordination compound. Low‐temperature heat capacities of the solid coordination compound have been measured by a precision automated adiabatic calorimeter over the temperature range from 78 to 386 K. A solid‐solid phase transition occurred in the temperature range of 328–358 K in the heat capacity curve, and the peak temperature, the molar enthalpy and molar entropy of the phase transition were determined to be T_trs=(356.759±0.697) K, Δ_trsH_m=(13.650±0.408) kJ· mol^?1, and Δ_trsS_m= (38.279±0.086) J·K^?1·mol^?1, respectively. The experimental values of the molar heat capacities in the temperature ranges of 78–328 K and 358–386 K were fitted to two polynomials, respectively. The polynomial fitted values of the molar heat capacities and fundamental thermodynamic functions of the sample relative to the standard reference temperature 298.15 K were calculated and tabulated at the intervals of 5 K.     

Crystal structure,thermal properties and detonation characterization of bis(5‐amino‐1,2,4‐triazol‐4‐ium‐3‐yl)methane dichloride

Bis(5‐amino‐1,2,4‐triazol‐4‐ium‐3‐yl)methane dichloride (BATZM·Cl₂ or C₅H₁₀N₈²⁺·2Cl^?) was synthesized and crystallized, and the crystal structure was characterized by single‐crystal X‐ray diffraction; it belongs to the space group C2/c (monoclinic) with Z = 4. The structure of BATZM·Cl₂ can be described as a V‐shaped molecule with reasonable chemical geometry and no disorder, and its one‐dimensional structure can be described as a rhombic helix. The specific molar heat capacity (C_p,m) of BATZM·Cl₂ was determined using the continuous C_p mode of a microcalorimeter and theoretical calculations, and the C_p,m value is 276.18 J K^?1 mol^?1 at 298.15 K. The relative deviations between the theoretical and experimental values of C_p,m, H_T – H_298.15K and S_T – S_298.15K of BATZM·Cl₂ are almost equivalent at each temperature. The detonation velocity (D) and detonation pressure (P) of BATZM·Cl₂ were estimated using the nitrogen equivalent equation according to the experimental density; BATZM·Cl₂ has a higher detonation velocity (7143.60 ± 3.66 m s^?1) and detonation pressure (21.49 ± 0.03 GPa) than TNT. The above results for BATZM·Cl₂ are compared with those of bis(5‐amino‐1,2,4‐triazol‐3‐yl)methane (BATZM) and the effect of salt formation on them is discussed.