几种典型有毒有机污染物的光催化降解研究

本文研究了氯代苯酚和苯胺类化合物的光催化降解,探讨了这些有机污染物分子的氯取代和化合物毒性与光催化降解之间的关系.研究表明,氯代苯酚和苯胺类化合物的光催化降解均符合表观一级反应动力学模型.有机物分子中氯取代基的引入加快了化合物的光催化降解,且反应速率随氯取代基个数的增多而增大.光催化降解的表观速率常数与正辛醇-水分配系数之间存在有较好的线性关系:logk=alogKow+b,该模型可以用于有机污染物的光催化降解性预测.     

环境污染物的光催化降解:活性物种与反应机理

以二氧化钛为代表的光催化能使许多有毒的有机污染物发生降解或矿化,产生易被生物降解的小分子和二氧化碳,过程涉及羟基自由基等活性物种.本文在作者小组的工作基础上,试图总结近年来二氧化钛、(羟基)氧化铁、杂多酸和金属酞菁光催化或光敏化在水处理方面所取得的研究进展.综述的重点是二氧化钛半导体光催化,讨论的内容包括:(1)超氧自由基、羟基自由基和单线态氧的检测和各种生成机理;(2)金属离子、杂多酸和氟离子修饰催化剂表面对活性物种产生的影响和可能机理;(3)离子交换树脂和有机膨润土负载金属酞菁对吸附和可见光敏化降解水中有机物的影响.     

超声-光催化降解水中有机污染物

超声-光催化是一项近年发展起来的废水处理的新型高级氧化技术。该技术利用超声的空化效应、自由基效应以及机械效应强化光催化的催化效能,实现超声和光催化对水中有机污染物的协同降解。本文从水中有机污染物的超声-光催化降解机理、降解动力学、影响因素（光催化剂类型和投加量、超声频率和强度、溶液pH值、温度、反应物初始浓度、溶解性气体和离子强度）和反应器类型（悬浮型、固定床型）4个方面介绍了相关研究进展,提出了目前存在的主要问题,并展望了超声-光催化降解水中有机污染物的发展方向。     

二氧化钛选择性光催化降解有机污染物研究进展

半导体二氧化钛已被广泛应用于有机污染物的光催化降解,但其主要是通过光与二氧化钛作用产生的羟基自由基与有机污染物发生自由基氧化反应,这种自由基反应在降解污染物时没有选择性,当几种有机污染物共存时,它优先催化降解吸附在其表面的高浓度污染物,而低浓度的有机污染物因吸附量少而达不到有效降解。因此,研究开发具有高选择性的能降解低浓度高毒性有机污染物的二氧化钛材料是环境科学领域亟待解决的热点之一。本文综述了近十年来二氧化钛选择性光催化降解有机污染物的研究动态和主要成果,并对未来发展趋势进行展望。     

有毒有机污染物光化学降解及机理研究

水环境污染已成为全球性普遍关注的重要课题.Fenton氧化法和Fenton光化学氧化法由于它在处理废水中的有毒有机污染物方面呈现了其它处理方式不能取代的特点而具有广阔的应用前景.虽然Fenton氧化法是一种非常有效的废水处理方法,但是由于体系中大量的铁离子的存在,使得处理后的体系带有颜色,且沉降铁泥的处理大大增加了运行成本.此外,Fenton反应一般需要在pH小于3的酸性介质中进行及在反应过程中过氧化氢的利用率不高等不足都限制了该方法的广泛应用.在本文中,我们用铁络合物代替Fenton反应中的铁离子并首次把可见光引入到反应体系中氧化降解有机污染物,着重研究了铁络合物在可见光照射下在均相和异相反应体系中对有毒有机污染物的光催化降解动力学、光化学反应机理、微环境的影响、活性自由基的形成以及光降解产物等方面内容,并得出以下几个重要结论:     

多金属氧酸盐光催化降解有机污染物研究进展

光催化作为一种高级氧化技术在有机污染物的降解方面得到广泛研究。本文概述了多金属氧酸盐光催化降解有机卤化物、染料、农药等有机污染物的研究进展,介绍了多金属氧酸盐与半导体氧化物、层状双氢氧化物、分子筛与介孔材料、离子交换树脂形成的复合材料,以及与半导体氧化物、聚乙烯醇等形成的复合膜材料的相关研究。     

非水溶性席夫碱铁疏水异相光催化降解有毒有机污染物

通过化学方法合成了疏水性金属有机复合物双（水杨醛）邻苯二胺席夫碱铁（Fe-Bis-Schiff-base- salicylaldehyde-o-Phenylenediamine,Fe-SPA）。在水溶性介质体系中,以Fe-SPA疏水特性作为异相光催化剂降解有毒有机污染物,在pH 7.2介质,可见光（λ>420nm）照射下,通过Fe-SPA活化H2O2降解有毒有机污染物罗丹明B（Rhodamine B,RhB）、亚甲基蓝（Methylene Blue trihydrate,MB）和2,4-二氯苯酚（2,4-Dichlorophenol,2,4-DCP）,研究了Fe-SPA的光催化特性。在实验条件下,反应150min RhB褪色完全,反应300min MB 褪色完全,反应10h DCP降解率达到65%。采用ESR（电子顺磁共振）跟踪测定活性氧化物种,检测到催化体系中产生了高氧化活性羟基自由基。通过RhB体系降解过程中的紫外-可见光谱和红外光谱分析,表明目标底物有效降解且最终转化为胺类和羧酸类小分子。在水溶性介质体系中,Fe-SPA以疏水特性作为异相光催化剂具有良好的稳定性,循环使用5次,光催化活性基本稳定。     

超声-光催化降解有机污染物的研究进展

超声-光催化联合技术是近年来废水处理的新型高级氧化技术。该技术主要利用超声波和光催化降解联合产生的协同效应来提高有机污染物的降解效率。本文主要就目前国内外超声-光催化降解有机物的降解机理、影响因素(光催化剂的性能及投加量、超声频率、超声强度及声功率、pH、温度、离子强度、污染物的浓度、溶解气体和其它添加物)以及在废水处理方面的应用等方面进行了综述,并介绍了超声-光催化技术存在的主要问题,最后展望了该技术的发展前景。     

宽带隙p区金属氧化物/氢氧化物对苯的光催化降解(英文)

苯具有高毒性和致病性,是空气中常见的一种挥发性有机污染物,对健康和环境危害大.以TiO2为代表的半导体光催化氧化技术是一种理想的环境治理技术,已广泛应用于一般室内挥发性有机物(VOCs)的去除.然而在处理苯等难降解有机污染物时,由于在催化剂表面生成难被降解的聚合物中间产物,往往导致TiO2光催化剂的失活.开发可在常温下使用的降解苯系污染物的高效光催化剂对于推广光催化技术在苯污染治理中的应用具有重大的意义.最近我们研究所开发出一系列宽带隙p区金属氧化物/氢氧化物光催化剂,它们对苯系污染物的光催化降解显示出很好的活性和稳定性,是一类极具应用前景的降解苯系污染物的新型光催化剂.在这篇文章中,我们总结这类宽带隙p区金属氧化物/氢氧化物光催化剂的制备及其光催化降解苯的活性,对其不同于TiO2的光催化机理,及其结构和光催化性能之间的关系进行初步的探讨.     

重金属离子的光催化还原研究进展

近些年来,光催化氧化还原用于环境污染消除方面已经得到了较为广泛的研究。其中,关于有机污染物的光催化氧化降解研究较多,其综述文章也屡见报道。在对有机污染物进行氧化研究的同时,也有一些关于有毒金属离子光催化还原的报道,但还未见有相关的综述,本文主要就重金属离子的光催化还原给以综述。     

Working principle and application of photocatalytic optical fibers for the degradation and conversion of gaseous pollutants

Photocatalytic optical fibers are promising for the degradation of gaseous and volatile pollutants in air due to their high specific surface area, high light utilization efficiency, easy regeneration, and sustainability. In particular, photocatalytic optical fibers have proven highly useful for the removal and conversion of different kinds of air pollutants in air. However, these fibers suffer from low photocatalytic degradation efficiencies. In this review, we have focused on introducing photocatalytic quartz optical fibers and photocatalytic plastic optical fibers for the degradation and transformation of gas-phase air pollutants. The principle of photocatalytic optical fibers and main methods for improving their photocatalytic and light utilization efficiencies based on semiconductor photocatalytic coatings are summarized. Moreover, the Langmuir-Hinshelwood kinetic rate equation was summarized to analyze the photocatalytic reduction of gaseous pollutants. Finally, an outlook on the future of photocatalytic optical fibers toward the removal and conversion of gaseous air pollutants is discussed.     

铝板为基础的S掺杂TiO_2催化分解有毒有机气体(英文)

S-doped TiO2(S-TiO2) films were immobilized on flexible low-cost aluminum sheets(S-TiO2-AS) using a sol-gel dipping process and low post-processing temperatures. The photocatalytic degradation of toxic organic vapors using the prepared films was evaluated using a continuous-flow glass tube under visible light exposure. The surface properties of the S-TiO2-AS and TiO2-AS films were examined by scanning electron microscopy, energy-dispersive X-ray spectroscopy, X-ray diffraction, and ultraviolet-visible spectroscopy. The photolysis of benzene, toluene, ethyl benzene, and xylene(BTEX) did not occur on the bare AS. In contrast, the photocatalytic degradation efficiencies of the target pollutants using S-TiO2-AS were higher than those obtained using reference TiO2-AS photocatalyst. In particular, the average photocatalytic degradation efficiencies of BTEX using S-TiO2-0.8-AS(S/Ti ratio = 0.8) over a 3-h process were 34%, 78%, 91%, and 94%, respectively, whereas those of TiO2-AS were 2%, 11%, 21%, and 36%, respectively. The photocatalytic decompo-sition efficiencies of BTEX under visible irradiation using S-TiO2-AS increased with increasing S/Ti ratios from 0.2 to 0.8, but decreased when the ratio further increased to 1.6. Thus, S-TiO2-AS can be prepared using optimal S/Ti ratios. The degradation of BTEX over S-TiO2-AS depended on the air flow rates and initial concentrations of the target chemical. Overall, under optimal conditions, S-TiO2-AS can be effectively applied for the purification of toxic organic vapors.     

The effect of dosage on the photocatalytic degradation of organic pollutants

Heterogeneous photocatalytic degradation of many organic pollutants, such as phenol and phenol derivatives, may be optimised if the catalyst surface saturation and the appearance and accumulation of non-photocatalytically degradable intermediates is avoided. It has been shown that under certain concentration threshold the highest degradation efficiencies are achieved. Over these concentrations, degradation rates become constant owing to the limited catalyst surface. By the dosage of the contaminant, currently in an aqueous solution, the process may be optimised, thus avoiding the formation of inert intermediates which may be more toxic than the parental compound. The effect of dosage on the photocatalytic degradation of phenol and phenol derivatives, such as salicylic acid and 4-aminophenol has been studied. Comparatively notably higher efficiencies have been obtained compared to those of the high initial single dose experiments (non-dosage), for which high initial concentrations of the organics resulted in the catalysts poisoning. Degussa P-25 and its combination with 13% (w/w) activated carbon, namely AC?TiO₂, have been used as catalysts. Almost complete degradations are achieved at low dosage rates (1–2 pmm/min). At higher dosage rates, different processes such as catalyst poisoning predominate, resulting in lower degradation efficiencies.     

LED照射光催化剂用于苯、甲苯、乙苯和二甲苯分解(英文)

Studies on the use of gas phase applications of light emitting diodes(LEDs) in photocatalysis are scarce although their photocatalytic decomposition kinetics of environmental pollutants are likely different from those in aqueous solutions.The present study evaluated the use of chips of visible light LEDs to irradiate nitrogen doped titania(N-TiO2) prepared by hydrolysis to decompose gaseous benzene,toluene,ethyl benzene,m-xylene,p-xylene,and o-xylene.Photocatalysts calcined at different temperatures were characterized by various analytical instruments.The degradation efficiency of benzene was close to zero for all conditions.For the other compounds,a conventional 8 W daylight lamp/N-TiO2 unit gave a higher photocatalytic degradation efficiency as compared with that of visible-LED/N-TiO2 units.However,the ratios of degradation efficiency to electric power consumption were higher for the photocatalytic units that used two types of visible-LED lamps(blue and white LEDs).The highest degradation efficiency was observed with the use of a calcination temperature of 350 oC.The average degradation efficiencies for toluene,ethyl benzene,m-xylene,p-xylene,and o-xylene were 35%,68%,94%,and 93%,respectively.The use of blue-and white-LEDs,high light intensity,and low initial concentrations gave high photocatalytic activities for the photocatalytic units using visible-LEDs.The morphological and optical properties of the photocatalysts were correlated to explain the dependence of photocatalytic activity on calcination temperature.The results suggest that visible-LEDs are energy efficient light source for photocatalytic gas phase applications,but the activity depends on the operational conditions.     

Efficient and Sustainable in situ Photo-Fenton Reaction to Remove Phenolic Pollutants by NH2-MIL-101(Fe)/Ti3C2Tx Schottky-Heterojunctions

Metal-organic frameworks (MOFs) with abundant active sites, a class of materials composed of metal nodes and organic ligands, is widely used for photocatalytic degradation of pollutants. However, the rapid recombination of photoinduced carriers of MOFs limits its photocatalytic degradation performance. Herein, Ti₃C₂T_x nanosheets-based NH₂-MIL-101(Fe) hybrids with Schottky-heterojunctions were fabricated by in situ hydrothermal assembly for improved photocatalytic activity. The photodegradation efficiencies of the NH₂-MIL-101(Fe)/Ti₃C₂T_x (N-M/T) hybrids for phenol and chlorophenol were 96.36 % and 99.83 % within 60 minutes, respectively. The N-M/T Schottky-heterojunction duly transferred electrons to the Ti₃C₂T_x nanosheets surface via built-in electric fields, effectively suppressing the recombination of photogenerated carriers, thereby improving the photocatalytic performance of NH₂-MIL-101(Fe). Moreover, the Fe-mixed-valence in the N-M/T led to improvement in the efficiency of the in situ generated photo-Fenton reactions, further enhancing the photocatalytic activity with more generated reactive oxygen species (ROS). The study proposes a highly effective removal of phenolic pollutants in wastewater.     

Bi4V2O11/石墨烯异质结光催化剂的制备及其在降解抗体污染物中应用

发展和设计高效、廉价和稳定的光催化剂用于抗生素污染物降解仍然存在巨大的挑战。 本文通过一种便捷的水热方法制备了Bi₄V₂O₁₁/石墨烯复合材料并用于可见光下抗生素污染物光催化降解。 通过自由基追踪实验,确认了光催化降解过程中活性物质为h⁺和·OH基团。 根据实验结果,提出了相应的反应机理。 石墨烯的引入可以有效地促进光生电子-空穴对的分离,从而增强光催化活性。 该复合催化剂展现出良好的活性和稳定性。 该方法以石墨烯为载体制备了光催化降解材料,为高性能光催化剂的制备提供了参考。     

光催化降解水中有机污染物研究现状与展望

光催化技术是一种新兴、高效、节能、现代污水处理技术。从半导体光催化技术研究现状、反应机理、常见有机污染物光催化降解的现状、提高半导体光催化剂活性的途径、光催化技术发展中存在问题等方面对半导体光催化技术加以综述和讨论。目前不论从光催化技术、光催化的基础研究以及光催化应用研究方面都需进行大量的、深入研究工作。     

New progress in photocatalytic degradation of bisphenol A as representative endocrine disrupting chemicals

Endocrine disrupting chemicals (EDCs) are a kind of hazardous pollutants in the environment which threaten the health of humans and animals at very low concentrations. EDCs and corresponding processing methods have been the hottest topics of scientific research in recent years. In this article, the classification, risks, occurrence, fate, and treatment methods of EDCs were briefly summarized. Among all of the treatment methods, photocatalytic degradation was one of the most ideal methods with bright prospects for BPA removal in the future. We summarized several problems restricting the efficiency of photocatalytic degradation and the latest progress, and proposed some suggestions on the improvement of photocatalytic degradation. Finally, mechanism of BPA's photocatalytic degradation had been summarized on the basis of free radical theory. New progress and opinions were provided in this review and we wish to provide a helpful guidance of EDCs removal for international readers.     

碳含量对C/TiO2复合材料光催化活性的影响

 通过热解单层分散在TiO2表面的蔗糖制得了碳均匀覆盖的C/TiO2复合材料,并采用X射线衍射、紫外-可见漫反射吸收光谱和N2物理吸附等方法对复合材料进行了表征. 以亚甲基蓝和罗丹明B为模型化合物评价了C/TiO2复合材料在紫外和可见光照射下的光催化性能,考察了碳含量对催化活性的影响. 结果表明,光源不同,污染物不同,碳含量不同对催化活性的影响均不相同. 对于考察的三个碳含量的C/TiO2催化剂,在紫外光照射下,前驱体中蔗糖/氧化钛质量比为0.1时制得的C/TiO2光催化降解亚甲基蓝的活性最高,蔗糖/氧化钛质量比为0.2时制得的C/TiO2光催化降解罗丹明B的活性最高; 在可见光照射下,蔗糖/氧化钛质量比为0.05时制得的C/TiO2光催化降解亚甲基蓝和罗丹明B的活性都最高.