Comparison of three different dispersive liquid–liquid microextraction modes performed on their most usual configurations for the extraction of phenolic,neutral aromatic,and amino compounds from waters

In this work we seek clues to select the appropriate dispersive liquid–liquid microextraction mode for extracting three categories of compounds. For this purpose, three common dispersive liquid–liquid microextraction modes were compared under optimized conditions. Traditional dispersive liquid–liquid microextraction, in situ ionic liquid dispersive liquid–liquid microextraction, and conventional ionic liquid dispersive liquid–liquid microextraction using chloroform, 1‐butyl‐3‐methylimidazolium tetrafluoroborate, and 1‐hexyl‐3‐methylimidazolium hexafluorophosphate as the extraction solvent, respectively, were considered in this work. Phenolic, neutral aromatic, and amino compounds (each category included six members) were studied as analytes. The analytes in the extracts were determined by high‐performance liquid chromatography with UV detection. For the analytes with polar functionalities, the in situ ionic liquid dispersive liquid–liquid microextraction mode mostly led to better results. In contrast, for neutral hydrocarbons without polar functionalities, traditional dispersive liquid–liquid microextraction using chloroform produced better results. In this case, where dispersion forces were the dominant interactions in the extraction, the refractive index of solvent and analyte predicted the extraction performance better than the octanol/water partition coefficient. It was also revealed that none of the methods were successful in extracting hydrophilic analytes (compounds with the log octanol/water partition coefficient <2). The results of this study could be helpful in selecting a dispersive liquid–liquid microextraction mode for the extraction of various groups of compounds.     

离子液体支撑液膜分离CO2

支撑液膜是一种在湿法冶金、生物技术以及气体分离等多个领域都有应用的重要膜分离技术。本文回顾了支撑液膜技术分离CO2的研究进展,按照液膜相的不同,分类介绍了常规载体支撑液膜和离子液体支撑液膜,指出了常规载体支撑液膜分离CO2的局限性,重点介绍了离子液体支撑液膜分离CO2的发展,分析了气体在离子液体支撑液膜中的传质机理以及常规离子液体结构、含量和支撑膜材料等对分离效果的影响;讨论了离子液体的功能化方法以及功能化离子液体支撑液膜分离CO2的渗透率、选择性和液膜稳定性;介绍了两种新的离子液体支撑液膜改进方法:聚离子液体膜与凝胶化离子液体支撑液膜。最后指出了今后用于CO2分离的离子液体支撑液膜的发展方向。     

有机硅改性席夫碱聚氨酯型液晶固定相的制备、表征及色谱性能

以对苯二胺、3-氯丙醇和4-羟基苯甲醛为原料,合成对苯二(对苯丙氧基醇)亚胺液晶基元,再与对苯二异氰酸酯和1,3-双(3-氨基丙基)四甲基二硅氧烷反应,合成席夫碱型硅氧烷聚氨酯液晶聚合物。 通过红外光谱法、X射线衍射、热分析、偏光显微镜等技术手段对其结构和性能进行了表征。 结果表明,该物质为席夫碱有机硅聚氨酯液晶聚合物,属于近晶相液晶,液晶区间为103~150 ℃,热分解温度为300 ℃。 用席夫碱型硅氧烷聚氨酯液晶固定相制备填充色谱柱,考察固定液的相对极性及其对取代苯位置异构体的色谱分离性能。 合成的席夫碱型硅氧烷聚氨酯液晶聚合物的液晶温度范围为103~146 ℃,属于强极性固定液(P_x=79),各组分色谱峰的分离度为0.96~3.33。     

双烯类液体橡胶的研发进展

液体橡胶作为合成橡胶的重要种类,是室温下能流动的橡胶材料。本文介绍了液体橡胶的性能特点及分类,着重阐述了双烯类液体橡胶即液体聚丁二烯橡胶、液体丁腈橡胶、液体异戊橡胶、液体丁苯橡胶和液体氯丁橡胶的结构特征、性能特点及主要用途,并进一步探讨了它们的研发、生产和使用情况。液体橡胶便于实现生产连续化和自动化,且加工方便,顺应时代发展的"低碳"潮流。从产品种类、牌号,应用范围等方面对今后的发展提出了建议。     

液晶二聚体

液晶二聚体作为半柔性主链型液晶聚合物的简化模型, 通过对其液晶性质的研究, 有助于理解更复杂聚合物体系的液晶行为. 另外, 液晶二聚体作为一类特殊的液晶也有其自身的相结构和相行为. 以分子结构与液晶态的相互关系为主线, 系统介绍了目前文献报道的对称及非对称棒状液晶二聚体(线形、H形、U形、T形)、盘状液晶二聚体(对称的盘-盘状液晶二聚体和非对称的盘-棒状液晶二聚体)和香蕉形液晶二聚体(对称的香蕉-香蕉形液晶二聚体和非对称的香蕉-棒状液晶二聚体)等各种不同类型的液晶二聚体的研究进展, 以期为新型液晶二聚体的分子设计提供一些借鉴.     

Liquid crystal effects on bacterial viability

The primary objective of this research was to test the hypothesis that lyotropic chromonic liquid crystals (neutral grey, red 14, blue 27, cromolyn) are not toxic to bacteria as compared with surfactant-based lyotropic (CPCl and CsPFO) or thermotropic (5CB and E7) liquid crystals. Biocompatibility of most liquid crystals is currently unknown and is required for the development of systems interfacing liquid crystals and biological systems. Potential liquid crystal toxicity was evaluated by two methods. The first examined bacterial survival measured by bacterial growth over 24 hours, after exposure to various liquid crystals. The second toxicity method evaluated liquid crystal effects on bacterial membrane permeability using two fluorescent dyes. Three different types of bacteria were evaluated to assess bacterial structure differences with respect to liquid crystal toxicity. The results of this study indicate that lyotropic chromonic liquid crystals are not toxic to bacteria, whereas thermotropic and surfactant-based lyotropic liquid crystals are toxic to one or more forms of bacteria. We conclude that lyotropic chromonic liquid crystals may be the preferred material in designing liquid crystal-based systems that interact with biological systems, especially in the use of liquid crystal-based biosensors.     

Liquid crystal effects on bacterial viability

The primary objective of this research was to test the hypothesis that lyotropic chromonic liquid crystals (neutral grey, red 14, blue 27, cromolyn) are not toxic to bacteria as compared with surfactant‐based lyotropic (CPCl and CsPFO) or thermotropic (5CB and E7) liquid crystals. Biocompatibility of most liquid crystals is currently unknown and is required for the development of systems interfacing liquid crystals and biological systems. Potential liquid crystal toxicity was evaluated by two methods. The first examined bacterial survival measured by bacterial growth over 24 hours, after exposure to various liquid crystals. The second toxicity method evaluated liquid crystal effects on bacterial membrane permeability using two fluorescent dyes. Three different types of bacteria were evaluated to assess bacterial structure differences with respect to liquid crystal toxicity. The results of this study indicate that lyotropic chromonic liquid crystals are not toxic to bacteria, whereas thermotropic and surfactant‐based lyotropic liquid crystals are toxic to one or more forms of bacteria. We conclude that lyotropic chromonic liquid crystals may be the preferred material in designing liquid crystal‐based systems that interact with biological systems, especially in the use of liquid crystal‐based biosensors.     

Recent analytical methodologies on equilibrium, kinetics, and dynamics at liquid/liquid interface

The form of liquid/liquid interface is flexible and it cannot be fixed at a spatial position. Also the interface is prevented from any physical contact by the organic phase and aqueous phase. In addition, analytical methods operated in vacuo cannot be applied. These restrictions depressed the development of liquid/liquid interfacial chemistry. However, the modification of liquid/liquid interfacial form and original analytical methods have been invented interdependently. The present review classifies the forms of liquid/liquid interface first, and it arrays the related analytical methods with brief explanations. It dominantly deals with recent reports of analytical methodologies, which were published in 2001-2004, on equilibrium, kinetics, and dynamics of substances at liquid/liquid interface, but it also includes historically important studies.     

几类非常规液晶材料的研究进展

本文综述了液晶二聚体、多爪型液晶及香蕉形液晶等几类非常规液晶材料的研究进展。结合笔者近几年的研究积累,着重介绍:(1)液晶二聚体的分子结构与液晶态结构及液晶二聚体所特有的奇偶效应与近晶多形性;(2)多爪型液晶的分子结构与液晶态结构的特点及由于兼有棒状分子与盘状分子的结构特点而具备的特殊的相变性质;(3)香蕉形液晶的分子结构与液晶态结构及香蕉形液晶所特有的手性与极化序。在介绍各类液晶材料的特点及研究热点的同时,围绕分子结构与液晶态结构的关系这一主题,深入讨论了各种液晶材料形成特殊分子排列及表现出特殊物理性质的机理。     

Copolymerizable initiator for improved polymer dispersed liquid crystal films

The problems of photoinitiator contamination are addressed for the liquid crystal phase in polymer dispersed liquid crystal films formed by photopolymerization induced phase separation of liquid crystal from monomer solutions. Initiator contamination lowers the clearing point of the liquid crystal phase, and decreases the photostability and resistivity of the polymer dispersed liquid crystal. These problems are minimized by replacing the conventional photoinitiators with copolymerizable initiators which become incorporated in the polymer phase as it separates. Copolymerizable photoinitiators are studied and used to form polymer dispersed liquid crystals with higher clearing point liquid crystal phases, higher resistivity, and better photostability than polymer dispersed liquid crystals formed with conventional photoinitiators. These improvements provide very significant advantages for many polymer dispersed liquid crystal applications.     

Electrochemistry at micro- and nanoscopic liquid/liquid interfaces

In this tutorial review, we will briefly introduce the history and basic concepts of micro- and nanoscopic liquid/liquid interfaces (size from nm to μm) in electrochemical studies of charge (electron and ion) transfer reactions at soft molecular interfaces. Their advantages and problems are usually compared with those of conventional liquid/liquid interfaces (size from mm to cm); and with solid/electrolyte interfaces. Three methods of fabrication of micro-liquid/liquid interfaces and one approach to support a nano-liquid/liquid interface are surveyed. The experimental and theoretical aspects are discussed along with possible approaches to characterize these micro- and nanoscopic liquid/liquid interfaces, and the methods to modify them with new functionality. Unique examples of applications of electrochemistry at micro- and nanoscopic liquid/liquid interfaces are provided. Some novel and potential research interests in the future in this field are discussed.     

Liquid—liquid equilibrium data: Their retrieval,correlation and prediction Part II: Correlation

The correlation of liquid—liquid equilibrium data using models for the liquid phase activity coefficients — for example NRTL and UNIQUAC — is reviewed. Different numerical procedures used in the computation of liquid—liquid equilibrium compositions on the basis of these models are evaluated. Methods for obtaining parameters from liquid—liquid equilibrium data are described, and a method leading to improved representation of tie lines using relatively few parameters is recommended. The NRTL and UNIQUAC equations are compared with respect to their ability of representing binary and ternary liquid—liquid equilibrium data. The UNIQUAC equation appears to be more convenient to use and to correlate the data slightly better than does NRTL with the same number of parameters.     

Copolymerizable initiator for improved polymer dispersed liquid crystal films

Abstract

The problems of photoinitiator contamination are addressed for the liquid crystal phase in polymer dispersed liquid crystal films formed by photopolymerization induced phase separation of liquid crystal from monomer solutions. Initiator contamination lowers the clearing point of the liquid crystal phase, and decreases the photostability and resistivity of the polymer dispersed liquid crystal. These problems are minimized by replacing the conventional photoinitiators with copolymerizable initiators which become incorporated in the polymer phase as it separates. Copolymerizable photoinitiators are studied and used to form polymer dispersed liquid crystals with higher clearing point liquid crystal phases, higher resistivity, and better photostability than polymer dispersed liquid crystals formed with conventional photoinitiators. These improvements provide very significant advantages for many polymer dispersed liquid crystal applications.     

Polymer-Metal Nanoparticle Complexes for Improving the Performance of Liquid Crystal Displays

Summary: Here we applied metal nanoparticles as a dopant of liquid crystals. Since liquid crystal molecules are self-assembled, it is not so easy to disperse metal nanoparticles in liquid crystal media. We first prepared metal nanoparticles protected by liquid crystal molecules by reduction of metal ions in the presence of liquid crystal molecules. This liquid crystal molecule-protected metal nanoparticles can be easily dispersed in liquid crystal media to fabricate liquid crystal sol containing metal nanoparticles. A simple liquid crystal molecule, 4′-pentylbiphenyl-4-carbonitrile (abbreviated as 5CB) was used in the present experiments at first. 5CB sol containing metal nanoparticles could construct novel twisted nematic liquid crystal devices (TN-LCDs), which revealed the electrooptic properties depending on the kind of metal of nanoparticles. During the experiments we discovered that 5CB-protected metal nanoparticles could move in liquid crystal media by applying the voltage. This phenomenon is inconvenient for liquid crystal displays, especially those driven by a matrix of thin-film transistors (TFTs). In order to avoid this phenomenon, we prepared polymer-protected metal nanoparticles and applied them to liquid crystal devices, which provided good performance as the devices, i.e., low driving voltage, rapid response at low temperature, and so on.     

液/液两相催化新进展--温控非水液/液两相催化

温控非水液/液两相催化,是指一类由两种或多种液态有机物组成的催化反应体系,其特点是体系的相态变化可通过温度来调控,即体系在高温时相互混溶呈均相,低温不溶分成两相,催化剂和产物分别处于两相,从而为解决均相催化剂分离难的问题开拓了一个新方向,是液/液两相催化研究领域最引人注目的进展之一.首次以"温控"为主线将氟两相催化作为温控液/液两相催化的一个特定类型纳入"温控非水液/液两相催化"范畴,并与其它通过温度来调控的有机液/液两相和作者提出的温控相分离催化串在一起作一较为详细的评述.     

含氟液晶研究进展

本文简述了含氟液晶的研究进展。根据小分子含氟液晶中氟原子或含氟基团的位置不同,将其分为3类：末端是氟原子或含氟基团的液晶、苯环上氢原子被氟原子取代的液晶、中心桥键上的氢原子被氟原子取代的液晶。根据小分子含氟液晶特点,归纳了氟原子或含氟基团对液晶分子物理性质的影响。同时对高分子含氟液晶的研究进展也做了介绍。     

近晶型聚硅氧烷侧链液晶的合成与表征

以烯丙基溴、对羟基苯甲酸、对氰基苯酚为主要原料合成了液晶基元对-烯丙氧基苯甲酸对-羟基苯氰酯,通过硅氢化加成反应将其接枝到聚甲基氢硅氧烷主链上,合成了一种新型的聚硅氧烷侧链液晶.通过傅里叶变换红外光谱仪(FT-IR)、氢核磁共振仪(1H-NMR)、差示扫描量热仪(DSC)、热台偏光显微镜(POM)和X-射线衍射仪(XR...     

Study of mass transfer enhancement on liquid/liquid interface by flow instabilities using gallium liquid electrode

Abstrac  Using liquid gallium electrodes it was proved that electrodiffusion method is a convenient tool for measuring the mass transfer at liquid/liquid interface. It was shown that mass transfer coefficient at the liquid/liquid interface at high Reynolds numbers is much more important in comparison to that measured at the solid/liquid interface at identical geometrical and hydrodynamic conditions. In experiments with the flow induced by the rotation of the upper disc (working ring electrode is placed on the bottom of the immobile disc), the Sherwood number increases in turbulent regime as Sh ∼ Re^1.8 at the liquid/liquid interface, contrary to the traditional law Sh ∼ Re^0.9 at the solid/liquid interface. In laminar regime the Sherwood number at the liquid/liquid and at the solid/liquid interfaces follows the traditional dependence Sh ∼ Re^0.5. It was shown that sharp increasing of the mass transfer coefficient at the liquid/liquid interface is closely related with the appearance of the surface waves, the phenomenon is identified as a Kelvin-Helmholtz type instability. Published in Russian in Elektrokhimiya, 2008, Vol. 44, No. 4, pp. 482–490. The text was submitted by the authors in English.     

液晶润滑的研究进展*

综述了近10多年来国内外液晶润滑及液晶添加剂的研究进展。概括了溶致液晶和热致液晶的润滑性能的理论研究及实验结果, 比较了不同类型液晶的润滑机理及在不同实验条件下的抗减摩性能, 以及它们作为普通润滑剂、合成油脂等的添加剂时的润滑效果。     

羊睾丸,梅花鹿胎盘提取液中铅的测定

利用火焰原子吸收法直接测定羊睾丸，梅花鹿胎盘提取液中铅的含量，实验结果表明，两种提以液中均含有铅，梅花鹿胎盘提取液铅含量低于羊睾丸，透析液组高于超滤液组，这一结果为合理开发利用羊睾丸，梅花鹿胎盘提取液提供一定的数据。