Excited‐state energy dynamics of conjugated polycarbogermane oligomers: Introduction effects of germanium atom into π‐conjugated molecular system

Excited‐state energy dynamics of the conjugated polycarbogermane oligomers, poly{[1,4‐bis(thiophenyl)buta‐1,3‐diyne]‐alt‐(dimethylgermane)} (PBTBD‐DMG; n = 33), poly{[1,4‐bis‐(thiophenyl)buta‐1,3‐diyne]‐alt‐(diphethylgermane)} (PBTBD‐DPG; n = 12), poly{[1,4‐bis(phenyl)buta‐1,3‐diyne]‐alt‐(dimethylgermane)} (PBPBD‐DMG; n = 36), and poly{[1,4‐bis(phenyl)buta‐1,3‐diyne]‐alt‐(diphenylgermane)} (PBPBD‐DPG; n = 2), were investigated by steady‐state and picosecond time‐resolved fluorescence spectroscopies in liquid solution. The introduction effect of a germanium atom into π‐conjugated oligomer backbones and the substitution effect of a methyl or phenyl group on the germanium atom are discussed from solvent polarity‐dependent studies. Steady‐state and time‐resolved fluorescence studies on the thiophene‐containing polycarbogermane (PBTBD‐DMG and PBTBD‐DPG) oligomers revealed considerable solvent polarity‐dependent characteristics, whereas those of the phenylene‐containing polycarbogermane (PBPBD‐DMG and PBPBD‐DPG) oligomers do not significantly show such characteristics. As the solvent polarity increased from n‐hexane to tetrahydrofuran, the steady‐state fluorescence spectra of PBTBD‐DMG and PBTBD‐DPG oligomers were significantly redshifted, and their fluorescence lifetimes seemed to change from ～624 to ～46 ps. These results suggest that the excited‐state dynamics of PBTBD‐DMG and PBTBD‐DPG oligomers are related to an intramolecular charge transfer (ICT) emission process through (d‐p) π conjugation between the π‐conjugated system and unoccupied 4d orbitals of the germanium atom. These results are supported by quantum chemical (AM1 and CNDO/2) calculations. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1298–1306, 2002     

1,4‐Bis(triisopropyl­silyl)buta‐1,3‐diyne and 1,4‐bis­(biphenyl‐4‐yl)buta‐1,3‐diyne

We report the single crystal structures of 1,4‐bis­(triisopropyl­silyl)buta‐1,3‐diyne, C₂₂H₄₂Si₂, and 1,4‐bis­(biphenyl‐4‐yl)buta‐1,3‐diyne, C₂₈H₁₈, the packing in both of which illustrates the versatility of weak C—H⋯π supra­molecular inter­actions in dictating the overall solid‐state structures.     

A one‐dimensional zinc(II) coordination polymer incorporating [1,1′‐biphenyl]‐4,4′‐dicarboxylate and N,N′‐bis(pyridin‐3‐ylmethyl)‐[1,1′‐biphenyl]‐4,4′‐dicarboxamide ligands

In the title compound, catena‐poly[[[N,N′‐bis(pyridin‐3‐ylmethyl)‐[1,1′‐biphenyl]‐4,4′‐dicarboxamide]chloridozinc(II)]‐μ‐[1,1′‐biphenyl]‐4,4′‐dicarboxylato‐[[N,N′‐bis(pyridin‐3‐ylmethyl)‐[1,1′‐biphenyl]‐4,4′‐dicarboxamide]chloridozinc(II)]‐μ‐[N,N′‐bis(pyridin‐3‐ylmethyl)‐[1,1′‐biphenyl]‐4,4′‐dicarboxamide]], [Zn₂(C₁₄H₈O₄)Cl₂(C₂₆H₂₂N₄O₂)₃]_n, the Zn^II centre is four‐coordinate and approximately tetrahedral, bonding to one carboxylate O atom from a bidentate bridging dianionic [1,1′‐biphenyl]‐4,4′‐dicarboxylate ligand, to two pyridine N atoms from two N,N′‐bis(pyridin‐3‐ylmethyl)‐[1,1′‐biphenyl]‐4,4′‐dicarboxamide ligands and to one chloride ligand. The pyridyl ligands exhibit bidentate bridging and monodentate terminal coordination modes. The bidentate bridging pyridyl ligand and the bridging [1,1′‐biphenyl]‐4,4′‐dicarboxylate ligand both lie on special positions, with inversion centres at the mid‐points of their central C—C bonds. These bridging groups link the Zn^II centres into a one‐dimensional tape structure that propagates along the crystallographic b direction. The tapes are interlinked into a two‐dimensional layer in the ab plane through N—H...O hydrogen bonds between the monodentate ligands. In addition, the thermal stability and solid‐state photoluminescence properties of the title compound are reported.     

catena‐Poly[[[N,N′‐bis­(salicyl­idene)propane‐1,3‐diaminato]cobalt(III)]‐μ‐azido] and catena‐poly[[[N,N′‐bis(salicyl­idene)propane‐1,3‐diaminato]cobalt(III)]‐μ‐thio­cyanato]

The two title complexes, catena‐poly[[{2,2′‐[1,3‐propane­diylbis(nitrilo­methyl­idyne)]diphenolato}cobalt(III)]‐μ‐azido], [Co(C₁₇H₁₆N₂O₂)(N₃)]_n, (I), and catena‐poly[[{2,2′‐[1,3‐propane­diylbis(nitrilo­methyl­idyne)]diphenolato}cobalt(III)]‐μ‐thio­cyanato], [Co(C₁₇H₁₆N₂O₂)(NCS)]_n, (II), are isomorphous polynuclear cobalt(III) compounds. In both structures, the Co^III atom is six‐coordinated in an octa­hedral configuration by two N atoms and two O atoms of one Schiff base, and two terminal N or S atoms from two bridging ligands. The [N,N′‐bis­(salicyl­idene)propane‐1,3‐diaminato]cobalt(III) moieties are linked by the bridging ligands, viz. azide in (I) and thio­cyanate in (II), giving zigzag polymeric chains with backbones of the type [–Co—N—N—N—Co]_n in (I) or [–Co—N—C—S—Co]_n in (II) running along the c axis.     

A novel three‐dimensional zinc(II) coordination polymer based on 3,3′‐{[1,3‐phenylenebis(methylene)]bis(oxy)}dibenzoic acid and 1,4‐bis(pyridin‐4‐yl)benzene: synthesis,crystal structure and photocatalytic properties

A novel three‐dimensional (3D) Zn^II coordination polymer, namely, poly[[[1,4‐bis(pyridin‐4‐yl)benzene](μ₃‐3,3′‐{[1,3‐phenylenebis(methylene)]bis(oxy)}dibenzoato)zinc(II)] 1,4‐bis(pyridin‐4‐yl)benzene], {[Zn(C₂₂H₁₆O₆)(C₁₆H₁₂N₂)]·C₁₆H₁₂N₂}_n or {[Zn(PMBD)(DPB)]·DPB}_n, 1 , where H₂PMBD is 3,3′‐{[1,3‐phenylenebis(methylene)]bis(oxy)}dibenzoic acid and DPB is 1,4‐bis(pyridin‐4‐yl)benzene, has been synthesized by self‐assembly using zinc nitrate, a semi‐rigid dicarboxylic acid and a nitrogen‐containing ligand. The single‐crystal X‐ray structure determination indicates that 1 possesses an intriguing 3D architecture with a 4‐connected uninodal cds topology, which is constructed from dinuclear {Zn₂} clusters and V‐shaped PMBD^2? linkers. Compound 1 exhibits excellent photocatalytic activity on the degradation of the organic dyes Rhodamine B (RhB), Rhodamine 6G (Rh6G) and Methyl Red (MR).     

Two ZnII‐based MOFs constructed with biphenyl‐2,2′,5,5′‐tetracarboxylic acid and flexible N‐donor ligands: syntheses,structures and properties

Two new Zn²⁺‐based metal–organic frameworks (MOFs) based on biphenyl‐2,2′,5,5′‐tetracarboxylic acid, i.e. H₄(o,m‐bpta), and N‐donor ligands, namely, poly[[(μ₄‐biphenyl‐2,2′,5,5′‐tetracarboxylato)bis{[1,3‐phenylenebis(methylene)]bis(1H‐imidazole)}dizinc(II)] dimethylformamide monosolvate dihydrate], {[Zn₂(C₁₆H₆O₈)(C₁₄H₁₄N₄)₂]·C₃H₇NO·2H₂O}_n or {[Zn₂(o,m‐bpta)(1,3‐bimb)₂]·C₃H₇NO·2H₂O}_n ( 1 ) {1,3‐bimb = [1,3‐phenylenebis(methylene)]bis(1H‐imidazole)}, and poly[[(μ₄‐biphenyl‐2,2′,5,5′‐tetracarboxylato)bis{[1,4‐phenylenebis(methylene)]bis(1H‐imidazole)}dizinc(II)] monohydrate], {[Zn₂(C₁₆H₆O₈)(C₁₄H₁₄N₄)₂]·H₂O}_n or {[Zn₂(o,m‐bpta)(1,4‐bimb)₂]·H₂O}_n ( 2 ) {1,4‐bimb = [1,4‐phenylenebis(methylene)]bis(1H‐imidazole)}, have been synthesized under solvothermal conditions. The complexes were characterized by IR spectroscopy, elemental analysis, single‐crystal X‐ray diffraction and powder X‐ray diffraction analysis. Structurally, the (o,m‐bpta)^4? ligands are fully deprotonated and combine with Zn²⁺ ions in μ₄‐coordination modes. Complex 1 is a (3,4)‐connected porous network with honeycomb‐like [Zn₂(o,m‐bpta)]_n sheets formed by 4‐connected (o,m‐bpta)^4? ligands. Complex 2 exhibits a (2,4)‐connected network formed by 4‐connected (o,m‐bpta)^4? ligands linking Zn²⁺ ions in left‐handed helical chains. The cis‐configured 1,3‐bimb and 1,4‐bimb ligands bridge Zn²⁺ ions to form multi‐membered [Zn₂(bimb)₂] loops. Optically, the complexes show strong fluorescence and display larger red shifts compared to free H₄(o,m‐bpta). Complex 2 shows ferroelectric properties due to crystallizing in the C_2v polar point group.     

Exploring the structural landscape of 2‐(thiophen‐2‐yl)‐1,3‐benzothiazole: high‐Z′ packing polymorphism and cocrystallization with calix[4]tube

We report here for the first time a cocrystal of the so‐called neutral calix[4]tube, which is two tail‐to‐tail‐arranged and partially deprotonated tetrakis(carboxymethoxy)calix[4]arenes, including three sodium ions, with 2‐(thiophen‐2‐yl)‐1,3‐benzothiazole, namely trisodium bis(carboxymethoxy)bis(carboxylatomethoxy)calix[4]arene tris(carboxymethoxy)(carboxylatomethoxy)calix[4]arene–2‐(thiophen‐2‐yl)‐1,3‐benzothiazole–dimethyl sulfoxide–water (1/1/2/2), 3Na⁺·C₃₆H₃₀O₁₂^2?·C₃₆H₃₁O₁₂^?·C₁₁H₇NS₂·2C₂H₆OS·2H₂O, which provides a new approach into the host–guest chemistry of inclusion complexes. Three packing polymorphs of the same benzothiazole with high Z′ (one with Z′ = 8 and two with Z′ = 4) were also discovered in the course of our desired cocrystallization. The inspection of these polymorphs and a previously known polymorph with Z′ = 2 revealed that Z′ increases as the strength of intermolecular contacts decreases. Also, these results expand the frontier of invoking calixarenes as a host for nonsolvent small molecules, besides providing knowledge on the rare formation of high‐Z′ packing polymorphs of simple molecules, such as the target benzothiazole.     

Highly luminescent diyne (?CC?CC?) containing hybrid polyphenyleneethynylene/poly(p‐phenylenevinylene) polymer: Synthesis and characterization

Luminophoric dialdehyde 1,4‐bis[4‐formylphenylethynyl‐(2,5‐dioctadecyloxyphenyl)‐buta‐1,3‐diyne] ( 4 ) enables the synthesis of diyne‐containing hybrid polyphenyleneethynylene/poly(p‐phenylenevinylene) polymer poly[1,4‐phenylene‐ethynylene‐1,4‐(2,5‐dioctadecyloxy)phenylene‐butadi‐1,3‐ynylene‐1,4‐(2,5‐dioctadecyloxy)phenylene‐ethynylene‐1,4‐phenylene‐ethene‐1,2‐diyl‐1,4‐(2,5‐dioctadecyloxy)phenylene‐ethene‐1,2‐diyl] ( 7 ) with a well‐defined general structure (? Ph? C?C? Ar? C?C? C?C? Ar? C?C? Ph? CH?CH? Ar? CH?CH? )_n, which was confirmed by NMR and infrared spectroscopy. The highly luminescent material is thermostable, soluble in usual organic solvents through the grafting of octadecyloxy side groups, and can be processed into transparent films. With the aim to investigate the effect of ? C?C? C?C? in the photophysical behavior of 7 , a comparison of the photophysics of monomers 3 [1,4‐bis(4‐formylphenylethynyl)‐2,5‐dioctadecyloxybenzene] and 4 and subsequently of their respective polymers 6 and 7 has been carried out. Similar photophysical behaviors for 6 (poly[1,4‐phenylenethynylene‐1,4‐(2,5‐dioctadecyloxyphenylene)ethene‐1,2‐diyl]) and 7 were observed in dilute CHCl₃ solution as a result of an identical chromophore system responsible for the absorption (λ_a = 448 nm) and emission (λ_f = 490 nm) in both compounds. The increased planarization and enhanced rigidity of the conjugated backbone in the solid state at room temperature as well as in frozen dilute tetrahydrofuran solution at 77 K cause the bathochromic shift of the absorption and emission spectra. The large octadecyloxy side chains obviously limit strong π‐π interchain interactions in the solid films, which explains the high fluorescence quantum yields of 35 and 52% obtained for 6 and 7 , respectively. The energetically arduous migration of the π electron through the diyne units not only requires a higher threshold voltage for the detection of photoconductivity in 7 but could possibly limit radiationless deactivation channels of the exciton, which explains the approximate 20% fluorescence quantum yields difference between 6 and 7 in the solid state. The electron‐withdrawing effect of the triple bonds confer both 6 and 7 with a good electron‐accepting property (E^ox = 1.39 V vs Ag/AgCl) if used in light‐emitting diode devices. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2670–2679, 2002     

Synthesis and characterization of novel fluorinated polyimides derived from 4,4′‐[2,2,2‐trifluoro‐1‐(3‐trifluoromethylphenyl)ethylidene]diphthalic anhydride and aromatic diamines

A novel fluorinated aromatic dianhydride, 4,4′‐[2,2,2‐trifluoro‐1‐(3‐trifluoromethyl‐phenyl)ethylidene]diphthalic anhydride (TFDA) was synthesized by coupling of 3′‐trifluoromethyl‐2,2,2‐trifluoroacetophenone with o‐xylene under the catalysis of trifluoromethanesulfonic acid, followed by oxidation of KMnO₄ and dehydration. A series of fluorinated aromatic polyimides derived from the novel fluorinated aromatic dianhydride TFDA with various aromatic diamines, such as p‐phenylenediamine (p‐PDA), 4,4′‐oxydianiline (ODA), 1,4‐bis(4‐aminophenoxy)benzene (p‐APB), 1,3‐bis(4‐amino‐phenoxy)benzene (m‐APB), 4‐(4‐aminophenoxy)‐3‐trifluoromethylphenylamine (3FODA) and 1,4‐bis(4‐amino‐2‐trifluoromethylphenoxy)benzene (6FAPB), were prepared by polycondensation procedure. All the fluorinated polyimides were soluble in many polar organic solvents such as NMP, DMAc, DMF, and m‐cresol, as well as some of low boiling point organic solvents such as CHCl₃, THF, and acetone. Homogeneous and stable polyimide solutions with solid content as high as 35–40 wt % could be achieved, which were prepared by strong and flexible polyimide films or coatings. The polymer films have good thermal stability with the glass transition temperature of 232–322 °C, the temperature at 5% weight loss of 500–530 °C in nitrogen, and have outstanding mechanical properties with the tensile strengths of 80.5–133.2 MPa as well as elongations at breakage of 7.1–12.6%. It was also found that the polyimide films derived from TFDA and fluorinated aromatic diamines possess low dielectric constants of 2.75–3.02, a low dissipation factor in the range of 1.27–4.50 × 10^?3, and low moisture absorptions <1.3%. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4143–4152, 2004     

Synthesis of polyesters by the polyaddition of bis(oxetane)s with active di(ester)s

The polyaddition of bis(oxetane)s 1,4‐bis[(3‐ethyl‐3‐oxetanylmethoxymethyl)]benzene (BEOB), 4,4′‐bis[(3‐ethyl‐3‐oxetanyl)methoxy]benzene (4,4′‐BEOBP), 1,4‐bis[(3‐ethy‐3‐oxetanyl)methoxy] ‐benzene (1,4‐BEOMB), 1,2‐bis[(3‐ethyl‐3‐oxetanyl)methoxy]benzene (1,2‐BEOMB), 4,4‐bis[(3‐ethyl‐3‐oxetanyl)methoxy]biphenyl (4,4′‐BEOMB), 3,3′,5,5′‐tetramethyl‐[4,4′‐bis(3‐ethyl‐3‐oxetanyl)methoxy]biphenyl (TM‐BEOBP) with active diesters di‐s‐phenylthioterephthalate (PTTP), di‐s‐phenylthioisoterephthalate (PTIP), 4,4′‐di(p‐nitrophenyl)terephthalate (NPTP), 4,4′‐di(p‐nitrophenyl)isoterephthalate (NPIP) were carried out in the presence of tetraphenylphosphonium chloride (TPPC) as a catalyst in NMP for 24 h, affording corresponding polyesters with M_n's in the range 2200–18,200 in 41–98% yields. The obtained polymers would soluble in common organic solvents and had high thermal stabilities. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1528–1536, 2004     

Linking Deltahedral Zintl Clusters with Conjugated Organic Building Blocks: Synthesis and Characterization of the Zintl Triad [R‐Ge9‐CHCHCHCH‐Ge9‐R]4−

The accessibility of triads with deltahedral Zintl clusters in analogy to fullerene–linker–fullerene triads is another example for the close relationship between fullerenes and Zintl clusters. The compound {[K(2.2.2‐crypt)]₄[RGe₉‐CH?CH? CH?CH‐Ge₉R]}(toluene)₂ (R=(2Z,4E)‐7‐amino‐5‐aza‐hepta‐2,4‐dien‐2‐yl), containing two deltahedral [Ge₉] clusters linked by a conjugated (1Z,3Z)‐buta‐1,3‐dien‐1,4‐diyl bridge, was synthesized through the reaction of 1,4‐bis(trimethylsilyl)butadiyne with K₄Ge₉ in ethylenediamine and crystallized after the addition of 2.2.2‐cryptand and toluene. The compound was characterized by single‐crystal structure analysis as well asNMR and IR spectroscopy.     

Synthesis of a soluble conjugated cumulene polymer: poly(biphenyl‐4,4′‐diyl‐1,4‐bis(4‐dodecyloxyphenyl)‐buta‐1,2,3‐triene‐1,4‐diyl)

A conjugated polymer with a butatriene segment in the main chain, poly(biphenyl‐4,4′‐diyl‐1,4‐bis(4‐dodecyloxyphenyl)buta‐1,2,3‐triene‐1,4‐diyl), was synthesized from 1,4‐bis(4‐bromophenyl)‐1,4‐bis(4‐dodecyloxyphenyl)buta‐1,2,3‐triene by dehalogenative polycondensation using Ni(cod)₂. The polymer was well soluble in usual organic solvents such as CHCl₃ and THF. Structural analyses and characterizations were carried out by IR, NMR, UV‐Vis, PL, and Raman spectroscopy, as well as electrical conductivity. It is suggested that π‐conjugation is extended to some degree through biphenylylene and butatrienylene linkages.     

New 3,3′[2,2′‐oxy‐bis‐(oxazaborolidine)]‐ethylenes. Structural studies by NMR,X‐ray,and quantum chemistry methods

3,3′‐[2,2′‐Oxy‐bis‐(4S‐methyl, 5R‐phenyl‐1,3,2‐oxazaborolidine)]ethylene ( 4a ) and 3,3′‐[2, 2′‐oxy‐(4S‐methyl‐5R‐phenyl‐1,3,2‐oxazaborolidine)‐ (1,3,2‐benzoxazaborolidine)]ethylene ( 4b ) were synthesized by the reaction of N,N′‐bis‐[(1R,2S)‐norephedrine]oxalyl ( 3a ) or N,N′‐[((1R,2S)‐norephedrine, o‐hydroxyphenylamine]oxalyl ( 3b ) with BH₃‐THF. The molecular structure of these compounds was established by NMR and infrared spectroscopy. The molecular geometry for 4 was studied by means of theoretical methods, resulting in structures that were in total agreement with those obtained by spectroscopy data and X‐ray diffraction. © 2005 Wiley Periodicals, Inc. Heteroatom Chem 16:513–519, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20151     

Ferrocenophanes with Interannular Nitrogen–Gallium Bridges. 1,3,2‐Diazagalla‐[3]Ferrocenophanes and an 1‐Aza‐3‐Azonia‐2‐Gallata‐[3]Ferrocenophane. Synthesis and Structure

1,1′‐Bis(trimethylsilylamino)ferrocene reacts with trimethyl‐ and triethylgallium to give the μ‐[ferrocene‐1,1′‐diyl‐bis(trimethylsilylamido)]tetraalkyldigallanes. These were converted into the 1,3‐bis(trimethylsilyl)‐2‐alkyl‐2‐pyridine‐1,3,2‐diazagalla‐[3]ferrocenophanes, of which the ethyl derivative was characterized by X‐ray structural analysis. Treatment of gallium trichloride with N,N′‐dilithio‐1,1′‐bis(trimethylsilylamino)ferrocene affords μ‐[ferrocene‐1,1′‐diyl‐bis(trimethylsilylamido)]tetrachlorodigallane along with bis(trimethylsilyl)‐2,2‐dichloro‐1‐aza‐3‐azonia‐2‐gallata‐[3]ferrocenophane as a side product, and both were structurally characterized by X‐ray analysis. The solution‐state structures of the new gallium compounds and aspects of their molecular dynamics in solution were studied by NMR spectroscopy (¹H, ¹³C, ²⁹Si NMR).     

Synthesis and characterization of alt‐bipyridinylene‐phenylene copolymers containing ruthenium(II) complexes

Poly{bis(4,4′‐tert‐butyl‐2,2′‐bipyridine)–(2,2′‐bipyridine‐5,5′‐diyl‐[1,4‐phenylene])–ruthenium(II)bishexafluorophosphate} ( 3a ), poly{bis(4,4′‐tert‐butyl‐2,2′‐bipyridine)–(2,2′‐bipyridine‐4,4′‐diyl‐[1,4‐phenylene])–ruthenium(II)bishexafluorophosphate} ( 3b ), and poly{bis(2,2′‐bipyridine)–(2,2′‐bipyridine‐5,5′‐diyl‐[1,4‐phenylene])–ruthenium(II)bishexafluorophosphate} ( 3c ) were synthesized by the Suzuki coupling reaction. The alternating structure of the copolymers was confirmed by ¹H and ¹³C NMR and elemental analysis. The polymers showed, by ultraviolet–visible, the π–π* absorption of the polymer backbone (320–380 nm) and at a lower energy attributed to the d–π* metal‐to‐ligand charge‐transfer absorption (450 nm for linear 3a and 480 nm for angular 3b ). The polymers were characterized by a monomodal molecular weight distribution. The degree of polymerization was approximately 8 for polymer 3b and 28 for polymer 3d . © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2911–2919, 2004     

Green‐emitting poly[(1,3‐phenylenevinylene)‐alt‐ (1,4‐phenylenevinylene)]s: Effect of the substitution patterns on the optical properties

Green‐emitting substituted poly[(2‐hexyloxy‐5‐methyl‐1,3‐phenylenevinylene)‐alt‐(2,5‐dihexyloxy‐1,4‐phenylenevinylene)]s ( 6 ) were synthesized via the Wittig–Horner reaction. The polymers were yellow resins with molecular weights of 10,600. The ultraviolet–visible (UV–vis) absorption of 6 (λ_max = 332 or 415 nm) was about 30 nm redshifted from that of poly[(2‐hexyloxy‐5‐methyl‐1,3‐phenylenevinylene)‐alt‐(1,4‐phenylenevinylene)] ( 2 ) but was only 5 nm redshifted with respect to that of poly[(1,3‐phenylenevinylene)‐alt‐(2,5‐dihexyloxy‐1,4‐phenylenevinylene)] ( 1 ). A comparison of the optical properties of 1 , 2 , and 6 showed that substitution on m‐ or p‐phenylene could slightly affect their energy gap and luminescence efficiency, thereby fine‐tuning the optical properties of the poly[(m‐phenylene vinylene)‐alt‐(p‐phenylene vinylene)] materials. The vibronic structures were assigned with the aid of low‐temperature UV–vis and fluorescence spectroscopy. Light‐emitting‐diode devices with 6 produced a green electroluminescence output (emission λ_max ～ 533 nm) with an external quantum efficiency of 0.32%. Substitution at m‐phenylene appeared to be effective in perturbing the charge‐injection process in LED devices. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1820–1829, 2004     

N‐(2‐Hydroxyethyl)‐N‐methyldithiocarbamato Complexes of Nickel(II) with Phosphorus Donor Ligands

Planar nickel(II) complexes involving N‐(2‐Hydroxyethyl)‐N‐methyldithiocarbamate, such as [NiX(nmedtc)(PPh₃)] (X = Cl, NCS; PPh₃ = triphenylphosphine), and [Ni(nmedtc)(P‐P)]ClO₄(P‐P = 1,1‐bis(diphenylphosphino)methane(dppm); 1,3‐bis(diphenylphosphino)propane (1,3‐dppp); 1,4‐bis(diphenylphosphino)butane(1,4‐dppb) have been synthesized. The complexes have been characterized by elemental analyses, IR and electronic spectroscopies. The increased νC–N value in all the complexes is due to the mesomeric drift of electrons from the dithiocarbamate ligands to the metal atom. Single crystal X‐ray structure of [Ni(nmedtc)(1,3‐dppp)]ClO₄·H₂O is reported. In the present 1,3‐dppp chelate, the P–Ni–P angle is higher than that found in 1,2‐bis(diphenylphosphino)ethane‐nickel chelates and lower than 1,4‐bis(diphenylphosphino)butane‐nickel chelates, as a result of presence of the flexible propyl back bone connecting the two phosphorus atoms of the complex.     

Three‐component,negative‐type,alkaline‐developable,thermally stable,and photosensitive polymer based on poly(2,6‐dihydroxy‐1,5‐naphthalene), a crosslinker,and a photoacid generator

A negative working and chemically amplified photosensitive polymer has been developed, which is based on poly(2,6‐dihydroxy‐1,5‐naphthalene) (PDHN), the crosslinker 4,4′‐methylenebis[2,6‐bis(hydroxymethyl)]phenol, and the photoacid generator (5‐propylsulfonyloxyimino‐5H‐thiophen‐2‐ylidene)‐(2‐methylphenyl)acetonitrile. PDHN, with a number‐average molecular weight of 25,000, was prepared by the oxidative coupling polymerization of 2,6‐dihydroxynaphthalene with di‐μ‐hydroxo‐bis[(N,N,N′,N′‐tetramethylethylenediamine)copper(II)] chloride in 2‐methoxyethanol at room temperature. The resulting PDHN showed a 5% weight loss temperature of 440 °C in nitrogen and a low dielectric constant of 2.82. The resist showed a sensitivity of 8.3 mJ cm^?2 and a contrast of 11 when it was exposed to 436‐nm light, followed by postexposure baking at 100 °C for 5 min and development with a 2.38 wt % aqueous tetramethylammonium hydroxide solution at 25 °C. A fine negative image featuring 10‐μm line‐and‐space patterns was obtained on a film 3 μm thick exposed to 10 mJ cm^?2 of ultraviolet light at 436 nm in the contact‐printed mode. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2235–2240, 2004     

Poly[aqua[μ2‐1,4‐bis(imidazol‐1‐ylmethyl)benzene‐κ2N3:N3′](μ2‐5‐hydroxybenzene‐1,3‐dicarboxylato‐κ4O1,O1′:O3,O3′)cadmium(II)], a twofold interpenetrated CdSO4‐like metal–organic polymer

In the title cadmium(II) complex, [Cd(C₈H₄O₅)(C₁₄H₁₄N₄)(H₂O)]_n, the 5‐hydroxybenzene‐1,3‐dicarboxylate (5‐OH‐1,3‐bdc) and 1,4‐bis(imidazol‐1‐ylmethyl)benzene (1,4,‐bix) ligands bridge water‐coordinated Cd^II atoms to generate a three‐dimensional network. Two carboxylate groups from different ligands function as O,O′‐chelates, while two imidazole N atoms from different ligands coordinate in a monodentate fashion, and one water molecule completes the seven‐coordinate pentagonal bipyramid around the Cd^II atom, in which the N atoms occupy the axial sites and the O atoms occupy the equatorial sites. The overall architecture is a twofold interpenetrated CdSO₄‐type framework. The two crystallographically equivalent frameworks are linked by O—H...O hydrogen bonds between the water, hydroxy and carboxylate groups.     

Syntheses,Crystal Structures,and Photocatalytic Activities of Three Copper Coordination Polymers Based on Bis(1H‐imidazol‐4‐yl)benzene/3‐(2‐Pyridyl)pyrazole

Three copper(II) coordination polymers (CuCPs), namely, [Cu_0.5(1,4‐bib)(SO₄)_0.5]_n ( 1 ), {[Cu(1,3‐bib)₂(H₂O)] · SO₄ · H₂O}_n ( 2 ), and [Cu(bpz)(SO₄)_0.5]_n ( 3 ), were assembled from the reaction of three N‐donors [1,4‐bib = 1,4‐bis(1H‐imidazol‐4‐yl)benzene, 1,3‐bib = 1,3‐bis(1H‐imidazol‐4‐yl)benzene, and Hbpz = 3‐(2‐pyridyl)pyrazole] with copper sulfate under hydrothermal conditions. Their structures were determined by single‐crystal X‐ray diffraction analyses and further characterized by elemental analyses (EA), IR spectroscopy, powder X‐ray diffraction (PXRD), and thermogravimetric analyses (TGA). Structure analyses reveal that complex 1 is a 3D 6‐connected {4¹² · 6³}‐ pcu net, complex 2 is a fourfold 3D 4‐connected 6⁶‐ dia net, whereas complex 3 is a 1D snake‐like chain, which further expanded into 3D supramolecular architectures with the help of C–H ··· O hydrogen bonds. Moreover, the photocatalytic tests demonstrate that the obtained CuCPs are photocatalysts in the degradation of MB with the efficiency is 86.4 % for 1 , 75.3 % for 2 , and 91.3 % for 3 after 2 h, respectively.