Copper(II)‐ and gold(III)‐mediated cyclization of a thiourea to a substituted 2‐aminobenzothiazole

Benzothiazole derivatives are a class of privileged molecules due to their biological activity and pharmaceutical applications. One route to these molecules is via intramolecular cyclization of thioureas to form substituted 2‐aminobenzothiazoles, but this often requires harsh conditions or employs expensive metal catalysts. Herein, the copper(II)‐ and gold(III)‐mediated cyclizations of thioureas to substituted 2‐aminobenzothiazoles are reported. The single‐crystal X‐ray structures of the thiourea N‐(3‐methoxyphenyl)‐N ′‐(pyridin‐2‐yl)thiourea, C₁₃H₁₃N₃OS, and the intermediate metal complexes aquabis[5‐methoxy‐N‐(pyridin‐2‐yl‐κN )‐1,3‐benzothiazol‐2‐amine‐κN ³]copper(II) dinitrate, [Cu(C₁₃H₁₁N₃OS)₂(H₂O)](NO₃)₂, and bis{2‐[(5‐methoxy‐1,3‐benzothiazol‐2‐yl)amino]pyridin‐1‐ium} dichloridogold(I) chloride monohydrate, (C₁₃H₁₂N₃OS)₂[AuCl₂]Cl·H₂O, are reported. The copper complex exhibits a distorted trigonal–bipyramidal geometry, with direct metal‐to‐benzothiazole‐ligand coordination, while the gold complex is a salt containing the protonated uncoordinated benzothiazole, and offers evidence that metal reduction (in this case, Au^III to Au^I) is required for the cyclization to proceed. As such, this study provides further mechanistic insight into the role of the metal cations in these transformations.     

Synthesis and photochemical reaction of cyclic oligomers: Synthesis and photopolymerization of novel C‐methylcalix[4]resorcinarene and p‐alkylcalix[n]arene derivatives containing spiro ortho ether groups

New photoreactive calixarene derivatives containing spiro ortho ester groups (calixarenes 3a–3c ) were synthesized by the reaction of 2‐bromomethyl‐1,4,6‐trioxaspiro[4.4]nonane with 2,8,14,20‐tetramethyl‐4,6,10,12,16,18,22,24‐octakis(carboxymethoxy)calix[4]resorcinarene, 5,11,17,23,29,35‐hexamethyl‐37,38,39,40,41,42‐hexakis(carboxymethoxy)calix[6]arene, and 5,11,17,23,29,35,41,47‐octa‐tert‐butyl‐49,50,51,52, 53,54,55,56‐octakis‐(carboxymethoxy)calix[8]arene, which were prepared by the reaction of C‐methylcalix[4]resorcinarene, p‐methylcalix[6]arene, and p‐tert‐butylcalix[8]arene, respectively. The thermal stability of the obtained calixarene derivatives containing spiro ortho ester groups was examined with thermogravimetric analysis, and it was found that these calixarene derivatives had good thermal stability. The photoinitiated cationic polymerization of spiro ortho ester groups in calixarene derivatives 3a–3c was examined with certain photoacid generators in the film state. Interestingly enough, the reaction of calixarene derivatives did not proceed with only photoirradiation; however, the reaction proceeded smoothly when the photoirradiation was followed by heating. Furthermore, calixarene 3a , composed of a C‐methylcalix[4]resorcinarene structure, showed the highest photochemical reactivity in this reaction system. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1293–1302, 2002     

Unusual conformations of 1,3‐dialk­oxy­thia­calix[4]arenes in the solid state

The structures of three syn‐1,3‐dialkoxy­thia­calix[4]arenes with unusual conformations in the solid state are reported. The pinched cone conformation of syn‐2²,4²‐dihydroxy‐1²,3²‐bis­(prop‐2‐enyl­oxy)thia­calix[4]arene, C₃₀H₂₄O₄S₄, (3a), is stabilized by two intra­molecular hydrogen bonds, remarkably formed from both OH groups to the same ether O atom. In syn‐2²,4²‐dihydroxy‐1⁵,2⁵,3⁵,4⁵‐tetra­nitro‐1²,3²‐bis­(prop‐2‐enyl­oxy)thia­calix[4]arene acetone disolvate, C₃₀H₂₀N₄O₁₂S₄·2C₃H₆O, (3b1), the mol­ecule is found in the 1,3‐alternate conformation. The crystallographic C2 symmetry is due to a twofold rotation axis running through the centre of the calixarene ring. The hydroxy groups cannot form intra­molecular hydrogen bonds as in (3a) and both are bonded to an acetone solvent mol­ecule. The mol­ecule of the pseudo‐polymorph of (3b1) in which the same compound crystallized without any solvent, viz. (3b2), is located on a crystallographic mirror plane. Only one of the two hydroxy groups forms a hydrogen bond, and this is with a nitro group of a neighbouring mol­ecule as acceptor. Mol­ecular mechanics calculations for syn‐1,3‐diethers suggest a preference of the 1,3‐alternate over the usual cone conformation for thia­calix[4]arene versus calix[4]arene and for para‐nitro versus para‐H derivatives.     

Conformations and resulting hydrogen‐bonded networks of hydrogen {phosphono[(pyridin‐1‐ium‐3‐yl)amino]methyl}phosphonate and related 2‐chloro and 6‐chloro derivatives

In the crystal structures of the conformational isomers hydrogen {phosphono[(pyridin‐1‐ium‐3‐yl)amino]methyl}phosphonate monohydrate (pro‐E), C₆H₁₀N₂O₆P₂·H₂O, (Ia), and hydrogen {phosphono[(pyridin‐1‐ium‐3‐yl)amino]methyl}phosphonate (pro‐Z), C₆H₁₀N₂O₆P₂, (Ib), the related hydrogen {[(2‐chloropyridin‐1‐ium‐3‐yl)amino](phosphono)methyl}phosphonate (pro‐E), C₆H₉ClN₂O₆P₂, (II), and the salt bis(6‐chloropyridin‐3‐aminium) [hydrogen bis({[2‐chloropyridin‐1‐ium‐3‐yl(0.5+)]amino}methylenediphosphonate)] (pro‐Z), 2C₅H₆ClN₂⁺·C₁₂H₁₆Cl₂N₄O₁₂P₄²⁻, (III), chain–chain interactions involving phosphono (–PO₃H₂) and phosphonate (–PO₃H⁻) groups are dominant in determining the crystal packing. The crystals of (Ia) and (III) comprise similar ribbons, which are held together by N—H...O interactions, by water‐ or cation‐mediated contacts, and by π–π interactions between the aromatic rings of adjacent zwitterions in (Ia), and those of the cations and anions in (III). The crystals of (Ib) and (II) have a layered architecture: the former exhibits highly corrugated monolayers perpendicular to the [100] direction, while in the latter, flat bilayers parallel to the (001) plane are formed. In both (Ib) and (II), the interlayer contacts are realised through N—H...O hydrogen bonds and weak C—H...O interactions involving aromatic C atoms.     

(Z)‐2‐Methylbuten‐1‐yl(aryl)iodonium trifluoromethanesulfonates containing electron‐withdrawing groups on the aryl moiety

The crystal structures of [(Z)‐2‐methyl­but‐1‐en‐1‐yl]­[4‐(tri­fluoro­methyl)­phenyl]­iodo­nium tri­fluoro­methane­sulfonate, C₁₂H₁₃F₃I⁺·CF₃O₃S^?, (I), (3,5‐di­chloro­phenyl)­[(Z)‐2‐methyl­but‐1‐en‐1‐yl]­iodo­nium tri­fluoro­methane­sulfonate, C₁₁H₁₂­Cl₂I⁺·CF₃O₃S^?, (II), and bis{[3,5‐bis­(tri­fluoro­methyl)­phenyl][(Z)‐2‐methyl­but‐1‐en‐1‐yl]­iodo­nium} bis­(tri­fluoro­methane­sulfonate) di­chloro­methane solvate, 2C₁₃H₁₂F₆I⁺·­2CF₃­O₃S^?·CH₂Cl₂, (III), are described. Neither simple acyclic β,β‐di­alkyl‐substituted alkenyl­(aryl)­idonium salts nor a series containing electron‐deficient aryl rings have been described prior to this work. Compounds (I)–(III) were found to have distorted square‐planar geometries, with each I atom interacting with two tri­fluoro­methane­sulfonate counter‐ions.     

Structural studies of (prop‐2‐en‐1‐yl)bis[(pyridin‐2‐yl)methylidene]amine hetero‐scorpionate copper complexes

The structures of five compounds consisting of (prop‐2‐en‐1‐yl)bis[(pyridin‐2‐yl)methylidene]amine complexed with copper in both the Cu^I and Cu^II oxidation states are presented, namely chlorido{(prop‐2‐en‐1‐yl)bis[(pyridin‐2‐yl)methylidene]amine‐κ³N,N′,N′′}copper(I) 0.18‐hydrate, [CuCl(C₁₅H₁₇N₃)]·0.18H₂O, (1), catena‐poly[[copper(I)‐μ₂‐(prop‐2‐en‐1‐yl)bis[(pyridin‐2‐yl)methylidene]amine‐κ⁵N,N′,N′′:C²,C³] perchlorate acetonitrile monosolvate], {[Cu(C₁₅H₁₇N₃)]ClO₄·CH₃CN}_n, (2), dichlorido{(prop‐2‐en‐1‐yl)bis[(pyridin‐2‐yl)methylidene]amine‐κ³N,N′,N′′}copper(II) dichloromethane monosolvate, [CuCl₂(C₁₅H₁₇N₃)]·CH₂Cl₂, (3), chlorido{(prop‐2‐en‐1‐yl)bis[(pyridin‐2‐yl)methylidene]amine‐κ³N,N′,N′′}copper(II) perchlorate, [CuCl(C₁₅H₁₇N₃)]ClO₄, (4), and di‐μ‐chlorido‐bis({(prop‐2‐en‐1‐yl)bis[(pyridin‐2‐yl)methylidene]amine‐κ³N,N′,N′′}copper(II)) bis(tetraphenylborate), [Cu₂Cl₂(C₁₅H₁₇N₃)₂][(C₆H₅)₄B]₂, (5). Systematic variation of the anion from a coordinating chloride to a noncoordinating perchlorate for two Cu^I complexes results in either a discrete molecular species, as in (1), or a one‐dimensional chain structure, as in (2). In complex (1), there are two crystallographically independent molecules in the asymmetric unit. Complex (2) consists of the Cu^I atom coordinated by the amine and pyridyl N atoms of one ligand and by the vinyl moiety of another unit related by the crystallographic screw axis, yielding a one‐dimensional chain parallel to the crystallographic b axis. Three complexes with Cu^II show that varying the anion composition from two chlorides, to a chloride and a perchlorate to a chloride and a tetraphenylborate results in discrete molecular species, as in (3) and (4), or a bridged bis‐μ‐chlorido complex, as in (5). Complex (3) shows two strongly bound Cl atoms, while complex (4) has one strongly bound Cl atom and a weaker coordination by one perchlorate O atom. The large noncoordinating tetraphenylborate anion in complex (5) results in the core‐bridged Cu₂Cl₂ moiety.     

A structural hierarchy in the hydrogen‐bonded adduct N,N′‐di­methyl­piperazine–tartaric acid–water (1/2/2): an N‐component N‐dimensional structure (N = 3) with substructures having N = 1 and 2

In the hydrated adduct N,N′‐di­methyl­piperazine‐1,4‐diium bis(3‐carboxy‐2,3‐di­hydroxy­propanoate) dihydrate, [MeNH(CH₂CH₂)₂NHMe]²⁺·2(C₄H₅O₆)^?·2H₂O or C₆H₁₆N₂²⁺·2C₄H₅O₆^?·2H₂O, formed between racemic tartaric acid and N,N′‐di­methyl­piperazine (triclinic P, Z′ = 0.5), the cations lie across centres of inversion. The anions alone form chains, and anions and water mol­ecules together form sheets; the sheets are linked by the cations to form a pillared‐layer framework. The supramolecular architecture thus takes the form of a family of N‐dimensional N‐component structures having N = 1, 2 or 3.     

Four NiII complexes with the new cyclam–methylimidazole ligand 1‐[(1‐methyl‐1H‐imidazol‐2‐yl)methyl]‐1,4,8,11‐tetraazacyclotetradecane

Although it has not proved possible to crystallize the newly prepared cyclam–methylimidazole ligand 1‐[(1‐methyl‐1H‐imidazol‐2‐yl)methyl]‐1,4,8,11‐tetraazacyclotetradecane (L^Im1), the trans and cis isomers of an Ni^II complex, namely trans‐aqua{1‐[(1‐methyl‐1H‐imidazol‐2‐yl)methyl]‐1,4,8,11‐tetraazacyclotetradecane}nickel(II) bis(perchlorate) monohydrate, [Ni(C₁₅H₃₀N₆)(H₂O)](ClO₄)₂·H₂O, (1), and cis‐aqua{1‐[(1‐methyl‐1H‐imidazol‐2‐yl)methyl]‐1,4,8,11‐tetraazacyclotetradecane}nickel(II) bis(perchlorate), [Ni(C₁₅H₃₀N₆)(H₂O)](ClO₄)₂, (2), have been prepared and structurally characterized. At different stages of the crystallization and thermal treatment from which (1) and (2) were obtained, a further two compounds were isolated in crystalline form and their structures also analysed, namely trans‐{1‐[(1‐methyl‐1H‐imidazol‐2‐yl)methyl]‐1,4,8,11‐tetraazacyclotetradecane}(perchlorato)nickel(II) perchlorate, [Ni(ClO₄)(C₁₅H₃₀N₆)]ClO₄, (3), and cis‐{1,8‐bis[(1‐methyl‐1H‐imidazol‐2‐yl)methyl]‐1,4,8,11‐tetraazacyclotetradecane}nickel(II) bis(perchlorate) 0.24‐hydrate, [Ni(C₂₀H₃₆N₆)](ClO₄)₂·0.24H₂O, (4); the 1,8‐bis[(1‐methyl‐1H‐imidazol‐2‐yl)methyl]‐1,4,8,11‐tetraazacyclotetradecane ligand is a minor side product, probably formed in trace amounts in the synthesis of L^Im1. The configurations of the cyclam macrocycles in the complexes have been analysed and the structures are compared with analogues from the literature.     

Synthesis and characterization of a cadmium(II)–organic supramolecular coordination compound based on the multifunctional 2‐amino‐5‐sulfobenzoic acid ligand

Much attention has been paid by chemists to the construction of supramolecular coordination compounds based on the multifunctional ligand 5‐sulfosalicylic acid (H₃SSA) due to the structural and biological interest of these compounds. However, no coordination compounds have been reported for the multifunctional amino‐substituted sulfobenzoate ligand 2‐amino‐5‐sulfobenzoic acid (H₂asba). We expected that H₂asba could be a suitable building block for the assembly of supramolecular networks due to its interesting structural characteristics. The reaction of cadmium(II) nitrate with H₂asba in the presence of the auxiliary flexible dipyridylamide ligand N,N′‐bis[(pyridin‐4‐yl)methyl]oxamide (4bpme) under ambient conditions formed a new mixed‐ligand coordination compound, namely bis(3‐amino‐4‐carboxybenzenesulfonato‐κO¹)diaquabis{N,N′‐bis[(pyridin‐4‐yl)methyl]oxamide‐κN}cadmium(II)–N,N′‐bis[(pyridin‐4‐yl)methyl]oxamide–water (1/1/4), [Cd(C₇H₆NO₅S)₂(C₁₄H₁₄N₄O₂)₂(H₂O)₂]·C₁₄H₁₄N₄O₂·4H₂O, (1), which was characterized by single‐crystal and powder X‐ray diffraction analysis (PXRD), FT–IR spectroscopy, thermogravimetric analysis (TG), and UV–Vis and photoluminescence spectroscopic analyses in the solid state. The central Cd^II atom in (1) occupies a special position on a centre of inversion and exhibits a slightly distorted octahedral geometry, being coordinated by two N atoms from two monodentate 4bpme ligands, four O atoms from two monodentate 4‐amino‐3‐carboxybenzenesulfonate (Hasba⁻) ligands and two coordinated water molecules. Interestingly, complex (1) further extends into a threefold polycatenated 0D→2D (0D is zero‐dimensional and 2D is two‐dimensional) interpenetrated supramolecular two‐dimensional (4,4) layer through intermolecular hydrogen bonding. The interlayer hydrogen bonding further links adjacent threefold polycatenated two‐dimensional layers into a three‐dimensional network. The optical properties of complex (1) indicate that it may be used as a potential indirect band gap semiconductor material. Complex (1) exhibits an irreversible dehydration–rehydration behaviour. The fluorescence properties have also been investigated in the solid state at room temperature.     

Three derivatives of 4‐fluoro‐5‐sulfonylisoquinoline

In 4‐fluoroisoquinoline‐5‐sulfonyl chloride, C₉H₅ClFNO₂S, (I), one of the two sulfonyl O atoms lies approximately on the isoquinoline plane as a result of minimizing the steric repulsion between the chlorosulfonyl group and the neighbouring F atom. In (S)‐(−)‐4‐fluoro‐N‐(1‐hydroxypropan‐2‐yl)isoquinoline‐5‐sulfonamide, C₁₂H₁₃FN₂O₃S, (II), there are two crystallographically independent molecules (Z′ = 2). The molecular conformations of these two molecules differ in that the amine group of one forms an intramolecular bifurcated hydrogen bond with the F and OH groups, whilst the other forms only a single intramolecular N—H...F hydrogen bond. The N—H...F hydrogen bonds correspond to weak coupling between the N(H) and ¹⁹F nuclei, observed in the ¹H NMR solution‐state spectra. In (S)‐(−)‐4‐[(4‐fluoroisoquinolin‐5‐yl)sulfonyl]‐3‐methyl‐1,4‐diazepan‐1‐ium chloride, C₁₅H₁₉FN₃O₂S⁺·Cl⁻, (III), the isoquinoline plane is slightly deformed, suggestive of a steric effect induced by the bulky substituent on the sulfonyl group.     

Two three‐dimensional networks in two polymorphs of biphenyl‐4,4′‐diaminium bis(3‐carboxy‐4‐hydroxybenzenesulfonate) dihydrate

Two polymorphs of biphenyl‐4,4′‐diaminium bis(3‐carboxy‐4‐hydroxybenzenesulfonate) dihydrate, C₁₂H₁₄N₂²⁺·2C₇H₅O₆S⁻·2H₂O, have been obtained and crystallographically characterized. Polymorph (I) crystallizes in the space group P2₁/c with Z′ = 2 and polymorph (II) in the space group P with Z′ = 0.5. The benzidinium cation in (II) is located on a crystallographic inversion centre. In both (I) and (II), the sulfonic acid H atoms are transferred to the benzidine N atoms, forming dihydrated 1:2 molecular adducts (base–acid). In the crystal packings of (I) and (II), the component ions are linked into three‐dimensional networks by combinations of X—H...O (X = O, N and C) hydrogen bonds. In addition, π–π interactions are observed in (I) between inversion‐related benzene rings [centroid–centroid distances = 3.632 (2) and 3.627 (2) Å]. In order to simplify the complex three‐dimensional networks in (I) and (II), we also give their rationalized topological analyses.     

Crystal structures of functional building blocks derived from bis(benzo[b]thiophen‐2‐yl)methane

The syntheses of three bis(benzo[b]thiophen‐2‐yl)methane derivatives, namely bis(benzo[b]thiophen‐2‐yl)methanone, C₁₇H₁₀OS₂, (I), 1,1‐bis(benzo[b]thiophen‐2‐yl)‐3‐(trimethylsilyl)prop‐2‐yn‐1‐ol, C₂₂H₂₀OS₂Si, (II), and 1,1‐bis(benzo[b]thiophen‐2‐yl)prop‐2‐yn‐1‐ol, C₁₉H₁₂OS₂, (III), are described and their crystal structures discussed comparatively. The conformation of ketone (I) and the respective analogues are rather similar for most of the compounds compared. This is true for the interplanar angles, the C_aryl—C_bridge—C_aryl angles and the dihedral angles. The best resemblance is found for a bioisotere of (I), viz. 2,2′‐dinaphthyl ketone, (VII). By way of interest, the crystal packings also reveal similarities between (I) and (VII). In (I), the edge‐to‐face interactions seen between two napthyl residues in (VII) are substituted by S…π contacts between the benzo[b]thiophen‐2‐yl units in (I). In the structures of the bis(benzo[b]thiophen‐2‐yl)methanols, i.e. (II) and (III), the interplanar angles are also quite similar compared with analogues and related active pharmaceutical ingredients (APIs) containing the dithiophen‐2‐ylmethane scaffold, though the dihedral angles show a larger variability and produce unsymmetrical molecules.     

2,6‐Bis(azaindole)pyridine: reactivity with iron(III) and copper(II) salts

1‐[6‐(1H‐Pyrrolo[2,3‐b]pyridin‐1‐yl)pyridin‐2‐yl]‐1H‐pyrrolo[2,3‐b]pyridin‐7‐ium tetrachloridoferrate(III), (C₁₉H₁₄N₅)[FeCl₄], (II), and [2,6‐bis(1H‐pyrrolo[2,3‐b]pyridin‐1‐yl‐κN⁷)pyridine‐κN]bis(nitrato‐κO)copper(II), [Cu(NO₃)₂(C₁₉H₁₃N₅)], (III), were prepared by self‐assembly from FeCl₃·6H₂O or Cu(NO₃)₂·3H₂O and 2,6‐bis(1H‐pyrrolo[2,3‐b]pyridin‐1‐yl)pyridine [commonly called 2,6‐bis(azaindole)pyridine, bap], C₁₉H₁₃N₅, (I). Compound (I) crystallizes with Z′ = 2 in the P space group, with both independent molecules adopting a trans–trans conformation. Compound (II) is a salt complex with weak C—H...Cl interactions giving rise to a zigzag network with π‐stacking down the a axis. Complex (III) lies across a twofold rotation axis in the C2/c space group. The Cu^II center in (III) has an N₃O₂ trigonal–bipyramidal environment. The nitrate ligand coordinates in a monodentate fashion, while the bap ligand adopts a twisted tridentate binding mode. C—H...O interactions give rise to a ribbon motif.     

Novel hydrazone derivatives of 7‐hydroxy‐3′,3′‐dimethyl‐3′H‐spiro[chromene‐2,1′‐isobenzofuran]‐8‐carbaldehyde

The structures of new oxaindane spiropyrans derived from 7‐hydroxy‐3′,3′‐dimethyl‐3′H‐spiro[chromene‐2,1′‐isobenzofuran]‐8‐carbaldehyde (SP1), namely N‐benzyl‐2‐[(7‐hydroxy‐3′,3′‐dimethyl‐3′H‐spiro[chromene‐2,1′‐isobenzofuran]‐8‐yl)methylidene]hydrazinecarbothioamide, C₂₇H₂₅N₃O₃S, (I), at 120 (2) K, and N′‐[(7‐hydroxy‐3′,3′‐dimethyl‐3′H‐spiro[chromene‐2,1′‐isobenzofuran]‐8‐yl)methylidene]‐4‐methylbenzohydrazide acetone monosolvate, C₂₇H₂₄N₂O₄·C₃H₆O, (II), at 100 (2) K, are reported. The photochromically active C_spiro—O bond length in (I) is close to that in the parent compound (SP1), and in (II) it is shorter. In (I), centrosymmetric pairs of molecules are bound by two equivalent N—H...S hydrogen bonds, forming an eight‐membered ring with two donors and two acceptors.     

An unusual polycatenating network self‐assembled by the 2D → 2D parallel → 3D parallel interpenetration of coordinative and hydrogen‐bonded (6,3) motifs

In the title coordination compound, catena‐poly[[[bis[diaquacadmium(II)]‐μ₂‐trans‐1,2‐bis(4‐pyridyl)ethene]bis{μ₂‐2,2′‐[(5‐carboxymethoxy‐m‐phenylene)dioxy]diacetato}] trans‐1,2‐bis(4‐pyridyl)ethene solvate dihydrate], {[Cd₂(C₁₂H₁₀O₉)₂(C₁₂H₁₀N₂)(H₂O)₄]·C₁₂H₁₀N₂·2H₂O}_n, (I), each Cd^II centre adopts a pentagonal–bipyramidal coordination geometry. The incompletely deprotonated 2,2′‐[(5‐carboxymethoxy‐m‐phenylene)dioxy]diacetate (TCMB) ligands and trans‐1,2‐bis(4‐pyridyl)ethene (bpe) ligands both act as bidentate bridges, linking the Cd^II centres into one‐dimensional ladders, which are connected into an undulating two‐dimensional (6,3) layer through O—H...N hydrogen bonds between the carboxylate groups of the TCMB ligands and the N atoms of the uncoordinated bpe ligands. Each undulating layer polycatenates two other identical layers, exhibiting the unusual combination of both 2D → 2D parallel and 2D → 3D parallel interpenetration (2D and 3D are two‐ and three‐dimensional, respectively).     

(Z)‐3‐(1H‐Indol‐3‐yl)‐2‐(3‐thienyl)­acrylo­nitrile and (Z)‐3‐[1‐(4‐tert‐butyl­benzyl)‐1H‐indol‐3‐yl]‐2‐(3‐thienyl)­acrylo­nitrile

(Z)‐3‐(1H‐Indol‐3‐yl)‐2‐(3‐thienyl)­acrylo­nitrile, C₁₅H₁₀N₂S, (I), and (Z)‐3‐[1‐(4‐tert‐butyl­benzyl)‐1H‐indol‐3‐yl]‐2‐(3‐thienyl)­acrylo­nitrile, C₂₆H₂₄N₂S, (II), were prepared by base‐catalyzed reactions of the corresponding indole‐3‐carbox­aldehyde with thio­phene‐3‐aceto­nitrile. ¹H/¹³C NMR spectral data and X‐ray crystal structures of compounds (I) and (II) are presented. The olefinic bond connecting the indole and thio­phene moieties has Z geometry in both cases, and the mol­ecules crystallize in space groups P2₁/c and C2/c for (I) and (II), respectively. Slight thienyl ring‐flip disorder (ca 5.6%) was observed and modeled for (I).     

Two different one‐dimensional supramolecular chains formed from the reaction of 2‐[1‐(pyridin‐4‐ylmethyl)‐1H‐benzimidazol‐2‐yl]quinoline with two different precursors,Co(NO3)2 and CoCl2

Two different one‐dimensional supramolecular chains with Co^II cations have been synthesized based on the semi‐rigid ligand 2‐[1‐(pyridin‐4‐ylmethyl)‐1H‐benzimidazol‐2‐yl]quinoline (L), obtained by condensation of 2‐(1H‐benzimidazol‐2‐yl)quinoline and 4‐(chloromethyl)pyridine hydrochloride. Starting from different Co^II salts, two new compounds have been obtained, viz. catena‐poly[[[dinitratocobalt(II)]‐μ‐2‐[1‐(pyridin‐4‐ylmethyl)‐1H‐benzimidazol‐2‐yl]quinoline] dichloromethane monosolvate acetonitrile monosolvate], {[Co(NO₃)₂(C₂₂H₁₆N₄)]·CH₂Cl₂·CH₃CN}_n, (I) and catena‐poly[[[dichloridocobalt(II)]‐μ‐2‐[1‐(pyridin‐4‐ylmethyl)‐1H‐benzimidazol‐2‐yl]quinoline] methanol disolvate], {[CoCl₂(C₂₂H₁₆N₄)]·2CH₃OH}_n, (II). In (I), the Co^II centres lie in a distorted octahedral [CoN₃O₃] coordination environment. {Co(NO₃)₂L}_n units form one‐dimensional helical chains, where the L ligand has different directions of twist. The helical chains stack together via interchain π–π interactions to form a two‐dimensional sheet, and another type of π–π interaction further connects neighbouring sheets into a three‐dimensional framework with hexagonal channels, in which the acetonitrile molecules and disordered dichloromethane molecules are located. In (II), the Co^II centres lie in a distorted trigonal–bipyramidal [CoCl₂N₃] coordination environment. {CoCl₂L}_n units form one‐dimensional chains. The chains interact via C—H...π and C—H...Cl interactions. The result is that two‐dimensional sheets are generated, which are further linked into a three‐dimensional framework via interlayer C—H...Cl interactions. When viewed down the crystallographic b axis, the methanol solvent molecules are located in an orderly manner in wave‐like channels.     

X‐ray and synchrotron diffraction studies of 2‐(pyridin‐2‐yl)‐1,10‐phenanthroline in the role of ligand for two copper polymorphs or hydrogen bonded with 2,2,6,6‐tetramethyl‐4‐oxopiperidinium hexafluorophosphate

Different extended packing motifs of dichlorido[2‐(pyridin‐2‐yl)‐1,10‐phenanthroline]copper(II), [CuCl₂(C₁₇H₁₁N₃)], are obtained, depending on the crystallization conditions. A triclinic form, (I), is obtained from dimethylformamide–diethyl ether or methanol, whereas crystallization from dimethylformamide–water yields a monoclinic form, (II). In each case, the Cu^II centre is in a five‐coordinate distorted square‐pyramidal geometry. The extended packing for both forms can be described as a highly offset π‐stacking arrangement, with interlayer distances of 3.674 (3) and 3.679 (3) Å for forms (I) and (II), respectively. The reaction of diprotonated Pt(tmpip₂NCN)Cl [tmpip₂NCN = 2,6‐bis(2,2,6,6‐tetramethylpiperidylmethyl)benzyl] with AgPF₆ under acidic conditions, followed by the addition of 2‐(pyridin‐2‐yl)‐1,10‐phenanthroline, results in a hydrogen‐bonded cocrystal, 2,2,6,6‐tetramethyl‐4‐oxopiperidinium hexafluorophosphate–2‐(pyridin‐2‐yl)‐1,10‐phenanthroline (1/1), C₉H₁₈NO⁺·PF₆⁻·C₁₇H₁₁N₃, (III). The extended packing maximizes π–π interactions in a parallel face‐to‐face arrangement, with an interlayer stacking distance of 3.4960 (14) Å.     

Supramolecular aggregation in three 4‐aryl‐6‐(1H‐indol‐3‐yl)‐3‐methyl‐1‐phenyl‐1H‐pyrazolo[3,4‐b]pyridine‐5‐carbonitriles

Both 6‐(1H‐indol‐3‐yl)‐3‐methyl‐4‐(4‐methylphenyl)‐1‐phenyl‐1H‐pyrazolo[3,4‐b]pyridine‐5‐carbonitrile and 6‐(1H‐indol‐3‐yl)‐3‐methyl‐4‐(4‐methoxyphenyl)‐1‐phenyl‐1H‐pyrazolo[3,4‐b]pyridine‐5‐carbonitrile crystallize from dimethylformamide solutions as stoichiometric 1:1 solvates, viz. C₂₉H₂₁N₅·C₃H₇NO, (I), and C₂₉H₂₁N₅O·C₃H₇NO, (II), respectively; however, 6‐(1H‐indol‐3‐yl)‐3‐methyl‐1‐phenyl‐4‐(3,4,5‐trimethoxyphenyl)‐1H‐pyrazolo[3,4‐b]pyridine‐5‐carbonitrile, C₃₁H₂₅N₅O₃, (III), crystallizes in the unsolvated form. The heterocyclic components of (I) are linked by C—H...π(arene) hydrogen bonds to form cyclic centrosymmetric dimers, from which the solvent molecules are pendent, linked by N—H...O hydrogen bonds. In (II), the heterocyclic components are linked by a combination of C—H...N and C—H...π(arene) hydrogen bonds into chains containing two types of centrosymmetric ring, and the pendent solvent molecules are linked to these chains by N—H...O hydrogen bonds. Molecules of (III) are linked into simple C(12) chains by an N—H...O hydrogen bond, and these chains are weakly linked into pairs by an aromatic π–π stacking interaction.     

Polymorph of {2‐[(2‐hydroxyethyl)iminiomethyl]phenolato‐κO}dioxido{2‐[(2‐oxidoethyl)iminomethyl]phenolato‐κ3O,N,O′}molybdenum(VI)

A second polymorphic form (form I) of the previously reported compound {2‐[(2‐hydroxyethyl)iminiomethyl]phenolato‐κO}dioxido{2‐[(2‐oxidoethyl)iminomethyl]phenolato‐κ³O,N,O′}molybdenum(VI) (form II), [Mo(C₉H₉NO₂)O₂(C₉H₁₁NO₂)], is presented. The title structure differs from the previously reported polymorph [Głowiak, Jerzykiewicz, Sobczak & Ziółkowski (2003). Inorg. Chim. Acta, 356 , 387–392] by the fact that the asymmetric unit contains three molecules linked by O—H...O hydrogen bonds. These trimeric units are further linked through O—H...O hydrogen bonds to form a chain parallel to the [11] direction. As in the previous polymorph, each molecule is built up from an MoO₂²⁺ cation surrounded by an O,N,O′‐tridentate ligand (O⁻C₆H₄CH=NCH₂CH₂O⁻) and weakly coordinated by a second zwitterionic ligand (O⁻C₆H₄CH=N⁺HC₂H₄OH). All complexes are chiral with the absolute configuration at Mo being C or A. The main difference between the two polymorphs results from the alternation of the chirality at Mo within the chain.