Investigation of structural,optical and photoluminescence properties of non-essential amino acid capped zinc sulfide nanoparticles for optoelectronic applications

The objective of the study is to synthesize Zinc Sulphide nanoparticles (ZnS) with different amino acid capping agents in aqueous solution by a simple and cost effective facile chemical co precipitation method and analyze their optoelectronic features. Bio compatibility with less toxic amino acids such as l-Glutamic acid, l-Alanine and l-Asparagine were used as capping agents. These amino acids are from Non-essential amino acid group and its capping behavior suitable for semiconducting nanoparticles like ZnS. The role of non essential amino acids were to stabilize the nanoparticle against agglomeration and also to provide chemical passivation that leads to a significant influence on the improved structural, optical and photoluminescence properties of ZnS nanoparticles. The detailed structural analysis of Zinc Sulphide nano particles revealed by X-ray diffraction method (XRD). From this analysis observed the formation of Cubic ZnS nanoparticles with an average crystallite size in the range of 2.08–2.22 nm.The morphology of the nano particles studied by Field emission scanning electron microscope (FESEM). Particle size examined by Dynamic Light scattering studies (DLS) and which revealed that particle size ranges are below 50 nm. The functional groups of nanoparticles were identified by Fourier transform Infrared spectroscopy (FT-IR) studies. Photoluminescence studies attributed that the considerable emission bands. The UV–Vis analysis disclosed the optical band gap range from 3.77 eV to 3.95 eV.     

Facile one pot synthesis of PbS nanosheets and their characterization

Metal-sulfides semiconductor nanosheets are talented entrant to be applied in electro-optic devices. Hence, the synthesis of PbS nanosheets is achieved in the current work using a simple route. The synthesized nanosheets were characterized by X-ray diffraction (XRD), FT-Raman, scanning electron microscope (SEM), UV-Visible, Photoluminescence (PL) and impedance spectroscopy techniques. XRD pattern and Raman spectrum confirms the formation of crystalline structure of PbS nanosheets. SEM study shows that the synthesized PbS is well defined nanosheets of <5 nm thicknesses. The absorption band edge is found to be remarkably blue shifted in nanosheets compare to bulk. The energy gap is calculated to be 1.16 eV which is about 3 times superior than the bulk value (0.41 eV). The enhancement of band gap indicates the occurrence of quantum confinement effect in PbS nanosheets. A strong violet emission band at ∼405 nm is observed in PL spectrum which is assigned to electrons transition from conduction-band edge to holes, ensnared at interstitial Pb²⁺ sites.     

dl‐Aspartic Acid‐Mediated Hydrothermal Synthesis of β‐ZnS Microspheres and Their Optical Properties

ZnS hollow microspheres were synthesized by a dl ‐aspartic acid mediated hydrothermal route. dl ‐aspartic acid plays an important role as crystal growth soft template, which regulates the release of Zn²⁺ ions for the formation of ZnS hollow spheres. The formation of these hollow spheres was mainly attributed to an Ostwald ripening process. The products were characterized by X‐ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), transmission electron microscopy (TEM), high resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED), electron diffraction (ED), UV/Vis spectroscopy (UV), and photoluminescence (PL). The shells of the microspheres were composed of ZnS quantum dots (QDs) with the average size of 2.31 nm. The average microspheres diameter is 0.5–3.5 μm. The shell thickness of the hollow sphere is ≈?300 nm. The optical bandgap energy increased significantly compared to the bulk ZnS material due to the strong quantum confinement effect. Two strong emissions at ≈?425 nm and ≈?472 nm in the photoluminescence (PL) spectrum of ZnS hollow microspheres indicate strong quantum confinement because of the presence of QDs.     

An improved method for chemical bath deposition of ZnS thin films

ZnS thin films were prepared by an improved chemical bath deposition method, which the substrates were preheated before being mounted in the reaction solution. X-ray diffraction (XRD) and energy dispersive spectrometer (EDS) reveals that thin film ZnS has a cubic structure and the typical composition ratio of Zn/S is 52:48. Scanning electron microscopy (SEM) characterization shows that the surface of the sample is compact and uniform. The transmission spectrum indicates a good transmission characteristic with an average transmittance of 82.2% in the spectra range from 350 nm to 800 nm and the optical band gap is about 3.76 eV.     

Synthesis and photoluminescence of ZnS macrolattice

ZnS macrolattice has been synthesized by an ultrasonication-assisted method. It is a face-centred cubic stucture with a lattice constant of about 5.4 nm. Each basis in one unit cell composes of about 1,400 atoms. The d-spacing of the macrolattice is about 10 times to that of ordinary sphalerite crystalline. The new structure can be confirmed by small angle X-ray diffraction, high-resolve TEM and selected area electron diffraction. The emission spectrum of the ZnS macrolattice consists of two main peaks at about 333 and 349 nm, respectively under 236 nm excitation. However, it consists of only one main peak at about 438 nm under 370 nm excitation and only one main peak at about 530 nm under 473 nm excitation. The near band transition about 349 nm demonstrates that the valence band composed of P-type function on the S atom splits to two bands. The conduct band has also split because of many peaks in the excitation spectra. In addition, some defect energy levels must appear in the band gap because blue and green emissions are observed.     

ZnS nanoparticles capped with watermelon rind extract and their potential application in dye degradation

We report fabrication of stable ZnS nanoparticles (NPs) using a green chemistry concept with watermelon rind extract as capping and stabilizing agent. The cubic structure of the NPs was evidenced by X-ray powder diffraction analysis and electron diffraction studies. Dynamic light scattering and high-resolution transmission electron microscopy studies revealed that the average size of the ZnS NPs was <12 nm. The bandgap of the ZnS nanocrystals was found to be 3.42 eV using ultraviolet–visible (UV–Vis) spectroscopy studies. The energy-dispersive X-ray spectrum of the fabricated ZnS NPs confirmed the elemental Zn and S signals without peaks from any impurities. The biomolecular capping of the ZnS NPs was analyzed using Fourier-transform infrared spectroscopy. An illustrative stabilization mechanism for the ZnS NPs is given using citrulline, a major phytochemical in watermelon rind extract. The obtained ZnS NPs showed good photocatalytic activity towards methylene blue dye degradation.     

花状ZnO/ZnS异质结构的简易合成、结构表征及光催化活性

采用简便的两步溶液相化学方法,在较低温度下(80℃),制备出了花状的ZnO/ZnS异质结构。分别利用X射线衍射、X射线光电子能谱仪、扫描电子显微镜、透射电子显微镜、紫外-可见光谱仪等测试手段对所制备的样品进行表征,结果表明ZnO/ZnS异质结构是由花状ZnO纳米结构和ZnS纳米粒子组成。在光降解罗丹明B(RhB)的测试中,ZnO/ZnS异质结构样品体现出了比ZnO前驱物和商业P25光催化剂更高的光催化效率,这主要可归因于异质结构更有利于电子-空穴的有效分离。ZnO/ZnS光催化剂体现出良好的循环稳定性。     

Synthesis and characterization of the water-soluble silica-coated ZnS:Mn nanoparticles as fluorescent sensor for Cu ions

Silica-coated ZnS:Mn nanoparticles were synthesized by coating hydrophobic ZnS:Mn nanoparticles with silica shell through microemulsion. The core–shell structural nanoparticles were confirmed by X-ray diffraction (XRD) patterns, high-resolution transmission electron microscope (HRTEM) images and energy dispersive spectroscopy (EDS) measurements. Results show that each core–shell nanoparticle contains single ZnS:Mn nanoparticle within monodisperse silica nanospheres (40 nm). Photoluminescence (PL) spectroscopy and UV–vis spectrum were used to investigate the optical properties of the nanoparticles. Compared to uncoated ZnS:Mn nanoparticles, the silica-coated ZnS:Mn nanoparticles have the improved PL intensity as well as good photostability. The obtained silica-coated ZnS:Mn nanoparticles are water-soluble and have fluorescence sensitivity to Cu²⁺ ions. Quenching of fluorescence intensity of the silica-coated nanoparticles allows the detection of Cu²⁺ concentrations as low as 7.3 × 10⁻⁹ mol L⁻¹, thus affording a very sensitive detection system for this chemical species. The possible quenching mechanism is discussed.     

Low-temperature growth and photoluminescence property of ZnS nanoribbons

At a low temperature of 450 degrees C, ZnS nanoribbons have been synthesized on Si and KCl substrates by a simple chemical vapor deposition (CVD) method with a two-temperature-zone furnace. Zinc and sulfur powders are used as sources in the different temperature zones. X-ray diffraction (XRD), selected area electron diffraction (SEAD), and transmission electron microscopy (TEM) analysis show that the ZnS nanoribbons are the wurtzite structure, and there are two types-single-crystal and bicrystal nanoribbons. Photoluminescence (PL) spectrum shows that the spectrum mainly includes two parts: a purple emission band centering at about 390 nm and a blue emission band centering at about 445 nm with a weak green shoulder around 510 nm.     

High yield preparation of single crystalline Cd metal nanotubes by non-catalytic thermal decomposition route

Large scale metallic cadmium (Cd) nanotubes with high purity have been obtained on glass substrate by catalyst-free thermal decomposition of cadmium oxide (CdO) powder at 1200 °C for 120 min using argon (Ar) gas as carrier agent inside an alumina tube mounted in horizontal tube furnace. The structural, compositional and morphological characterizations of cadmium nanotubes (CdNTs) were performed by X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDS), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high resolution transmission electron microscopy (HRTEM) and selected area electron diffraction (SAED). The CdNTs were observed to be single crystalline with 60–70 nm diameter and tens of micrometre length. Based on vapour–solid (VS) and rolling layer mechanisms, growth process has been proposed for the formation of CdNTs. Room temperature photoluminescence (PL) spectrum for CdNTs recorded under xenon light wavelength of 325 nm exhibited a very prominent emission band at 383 nm which may be ascribed to either surface oxidation effects or radiative recombination of electrons in the s, p conduction band near the Fermi surface and the holes in the d bands generated by xenon light excitation. This shows the promise of CdNTs for applications in UV-light emitting devices.     

Chelating ligand-mediated synthesis of hollow ZnS microspheres and its optical properties

Monodispersed hollow ZnS microspheres have been successfully synthesized by a facile ethylenediamine tetraacetic acid (EDTA) mediated hydrothermal route. The sizes of the hollow spheres vary from 1.5 to 3.5 microm when the reaction temperature varied from 130 to 230 degrees C. The formation of these hollow spheres is attributed to the oriented aggregation of ZnS nanocrystals around the gas-liquid interface between H(2)S and water. EDTA plays important role as chelating ligand and capping reagent, which regulates the release of Zn(2+) ions for the formation of ZnS hollow spheres. The products were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), UV-vis spectroscopy, photoluminescence, and Raman spectroscopy. The obtained ZnS hollow spheres show a sharp and photostable UV emission approximately 370 nm, which is attributed to the recombination process associated with interstitial sulfur vacancy.     

Preparation of Cd-doped SnO<Subscript>2</Subscript> nanoparticles by sol–gel route and their optical properties

Nanocrystalline cadmium doped tin oxide (SnO₂) powders of about 2.5–4.5 nm in size have been synthesized by using different solvents via sol–gel method. The obtained samples were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Scanning electron microscopy (SEM), Energy dispersive X-ray analysis (EDX), Transmission electron spectroscopy (TEM), UV-Vis absorption and Photoluminescence (PL) spectroscopy. The PL emission spectra revealed that the band centered at 452 nm might be related with oxygen vacancies. A spherical, small rod and slice like morphologies of the prepared Cd-SnO₂ nanoparticles were observed in the SEM and TEM studies. The presence of Cd modifies the structural, morphological and optical properties of the tin oxide nanoparticles.     

Ultrasonic assisted synthesis of nanocrystalline cellulose as support and reducing agent for Ag nanoparticles: green synthesis and novel effective nanocatalyst for degradation of organic dyes

In this study, nanocrystalline cellulose (NCC) prepared from microcrystalline cellulose using high‐intensity ultrasonication as mechanical method without any chemical treatment. The obtained NCC with around 30–50 nm diameters, utilized as support, reducing and stabilizing agent for in‐situ green and eco‐friendly synthesis of silver nanoparticles (Ag NPs). The catalytic activity of composite was examined for degradation of environmental pollutants. The structure of as‐synthesized composite (Ag@NCC) was characterized by ultraviolet–visible spectroscopy (UV–vis), field emission scanning electron microscopy (FE‐SEM); Transmission electron microscopy (TEM); Energy dispersive spectroscopy (EDS), Fourier transform infrared spectroscopy (FT‐IR), X‐ray diffraction (XRD) and thermogravimetric analysis (TGA). The results of the catalytic reaction experiments showed that spherically shaped silver nanoparticles of around 20 nm distributed on the surface of nanocellulose demonstrated high catalytic efficiency towards the removal of methyl orange (MO) and 4‐nitrophenol (4‐NP).     

Effect of Deposition Temperature on Structural and Optical Properties of Chemically Sprayed ZnS Thin Films

Zinc sulfide (ZnS) thin films have been successfully deposited via spray pyrolysis using an aqueous solution of thiourea and zinc acetate onto glass substrate. The effect of varying substrate temperature (150, 200,250 and 300 °C) on structure and optical properties is presented. The films have been characterized by X- ray diffraction (XRD), UV-Vis-NIR spectrometry, photoluminescence (PL) spectroscopy and field emission scanning electron microscopy (FESEM). All the deposited ZnS films exhibit a cubic structure, while crystallinity and morphology are found to depend on spray temperature. PL analysis indicates the presence of violet and green emissions arising from Zn and S vacancies. The value of bandgap of ZnS films is found to decrease slightly with increasing substrate temperature; varying in the range 3.52–3.25 eV, most probably associated with the formation of Zn(S,O) solid solution.     

Hydrothermal Synthesis, Characterization and Photoluminescence Properties of GdOHCO3 Rhombic Microcrystals

GdOHCO₃ rhombic microcrystals were synthesized by hydrothermal method with urea used as the precipitator. Experimental parameters, such as the molar ratio of the starting reagents, reaction temperature and reaction time were examined. The as-obtained product was characterized by powder X-ray diffraction(XRD), field-emission scanning electron microscopy(FESEM), X-ray photoelectron spectroscopy(XPS), Fourier transform infrared spectroscopy(FTIR) and spectrofluorometry. The main reactions to form GdOHCO₃ were proposed. In addition, the photoluminescence(PL) properties of GdOHCO₃ rhombic microcrystals were discussed. The broad band located between 350 nm and 600 nm in the emission spectrum can be attributed to the self-trapped exciton luminescence.     

Spinel cobalt manganese oxide nano-composites grown hydrothermally on nanosheets for enhanced photocatalytic mineralization of Acid Black 1 textile dye: XRD,FTIR, FESEM,EDS and TOC studies

Spinel cobalt manganese oxide nano-composites were grown on nanosheets using acetate precursors in mono-ethylene glycol. Crystal structures and morphologies of nano-composites were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy and energy dispersive X-ray spectroscopy to characterize the element composition. Fourier transform infrared spectroscopy was used for structural characterization and UV–Vis diffuse reflectance spectra (UV–Vis DRS) for optical properties. XRD results showed tetragonal spinel cobalt manganese oxide (Co,Mn)(Co,Mn)₂O₄ and cubic spinel cobalt manganese oxide MnCo₂O_4.5 structural phases. The crystallite size calculated by the Scherrer’s equation was 17 nm. The morphological studies displayed the existence of 40–63 nm nano-powders grown on nanosheets with a good degree of crystallization. Optical properties of cobalt manganese oxide nano-composites exhibit absorbance edge, and the band gap calculated from UV–Vis DRS results was 1.78 eV. FTIR spectra indicated that hydroxyl and oxide groups were major active sites. The absorption bands observed at 656 and 568 cm^?1 are related to stretching vibrations of Mn–O and Co–O, respectively. The photocatalytic activities of nano-composites for photocatalytic mineralization of Acid Black 1 textile dye showed an outstanding performance. Photocatalytic process yielded 91% total organic carbon removals within 2.5 h of irradiation. The enhanced photocatalytic activity was attributed to better charge separation of the photo-generated electron–hole pairs in nano-composite.     

Preparation of copper oxide nanosheets by pulsed laser ablation in liquid for anticancer,antioxidant, and antibacterial activities

In this work, the preparation of copper oxide (CuO) nanosheets by laser ablation in water was demonstrated. The optical, structural, stability, and morphological properties of CuO nanosheets were investigated using UV–Vis spectrophotometer, X-ray diffraction (XRD), scanning electron microscope (SEM), and zeta potential (ZP). The XRD results confirm the formation of crystalline (CuO) with a monoclinic phase. The optical energy gap of CuO nanosheets was found to be 2.2 eV at 300 k. The average thickness of the synthesized copper oxide nanosheets is 25 nm. Energy dispersive X-ray result confirms the formation of stoichiometric CuO. The zeta potential result confirms the synthesized CuO colloid is stable. Gram-positive bacteria are found to be more susceptible to CuO nanosheets than Gram-negative bacteria. The synthesized copper oxidenanosheets are tested for antibacterial activity against Gram (+ve) and Gram (-ve) bacteria stains. The results suggest that CuO NPS can give hydrogen atoms and remove the unstable electron from DPPH at a rate of 200 μg/ml than 12.50 μg/ml. The results demonstrate that the copper oxide nanosheets have an effective antioxidant. Furthermore, according to a cytotoxicity assay, when cancer cells are incubated with copper oxide nanosheets, they are unable to grow well. copper oxide nanosheets can induce apoptosis and suppress pancreatic cell proliferation.     

Preparation of cellulose-based fluorescent materials using Zinc sulphide quantum dot-decorated graphene by a one-step hydrothermal method

Cellulose-based fluorescent materials using Zinc sulphide (ZnS) quantum dot-decorated graphene were prepared by a one-step hydrothermal method. X-ray photoelectron spectroscopy analysis identified the chemical states of Zn, S, C, O, and N in the composite paper. Transmission electron microscopy showed that the graphite oxide was reduced to graphene sheets, and ZnS nanoparticles (<10 nm) were deposited on the surface of these sheets. Scanning electron microscopy indicated that graphene sheets were attached to the surface of paper fibers, and the paper structure and morphology of the fibers were not observably damaged during the hydrothermal reaction. The cellulose-based composite had strong ultraviolet absorption in the range of 200–340 nm, and its main absorption peak was at approximately 296 nm. The band edge emission of photoluminescence spectrum of the composite occurred at 466 nm with an excitation wavelength of 320 nm. The laser scanning confocal microscope image of the composite exhibited an intense blue fluorescence under UV light at 405 nm.     

Solid state studies on cobalt and copper tungstates nano materials

The cobalt and copper tungstates of the composition Co_1?xCu_xWO₄ (where x = 0.0, 0.3, 0.5, 0.7 and 1.0) were synthesized by co-precipitation method. The compounds were characterized by Thermogravimetric Differential Scanning Calorimeter, X-ray powder diffraction, Infrared spectroscopy, Scanning electron microscopy (SEM), Transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS) techniques. The Rietveld refinements of X-ray powder diffraction data for the composition Cu_0.5Co_0.5WO₄ reveal the triclinic structure with Pī symmetry. The SEM and TEM studies of the compounds show average particle size in the range of 30–50 nm. The XPS studies confirmed the 2+ oxidation state of the Co and Cu, whereas W exists in 6+ state. The Diffuse reflectance Ultraviolet–visible spectroscopy illustrates band gaps of the compounds ranging from 2.95 to 2.79 eV. The CoWO₄ shows promising photoluminescence result exhibiting strong emission intensity at 468 nm.     

Facile Synthesis of BiOI Nanoparticles at Room Temperature and Evaluation of their Photoactivity Under Sunlight Irradiation

In this study, highly photoactive BiOI nanoparticles (NPs) under sunlight irradiation were synthesized by a facile precipitation method using polyvinylpyrrolidone (PVP) at room temperature. The as‐prepared catalysts were characterized by X‐ray diffraction (XRD), scanning electron microscopy (SEM), transition electron microscopy (TEM), energy‐dispersive X‐ray spectroscopy (EDX), Fourier transform infrared (FTIR) and UV–vis diffuse reflectance spectra (UV–vis DRS). The results of XRD showed that PVP did not have any significant effect on tetragonal crystalline structure of BiOI. Also, using different amounts of PVP in the synthesis led to different morphologies and sizes of BiOI particles. It was found that using 0.2 g of PVP in the synthesis method changed morphology from 1‐μm platelets to NPs with size under 10 nm. In addition, the photocatalytic performance of prepared photocatalysts was evaluated in the photodegradation of reactive blue 19 (RB19) dye under sunlight irradiation. The BiOI synthesized using 0.2 g PVP (BiOI0.2) showed higher degradation efficiency compared to BiOI prepared without any additive. Excellent visible light photocatalytic properties of nano‐scaled BiOI0.2 samples compared to BiOI platelets could be attributed to higher surface‐to‐volume ratio and narrow band‐gap energy of as‐prepared BiOI0.2 NPs.