Electric-Field Assisted In Situ Hydrolysis of Bulk Metal–Organic Frameworks (MOFs) into Ultrathin Metal Oxyhydroxide Nanosheets for Efficient Oxygen Evolution

Facile preparation of low-cost electrocatalysts for efficient oxygen evolution reaction (OER) remains a big challenge. Herein, a novel strategy for ultrafast (20 s) transformation of bulk metal–organic frameworks (MOFs) into ultrathin metal oxyhydroxide nanosheets for efficient OER has been developed. For two isomeric MOFs ( FJI-H25Fe and FJI-H25FeCo ), only the metastable FJI-H25FeCo bulk can immediately transform into FeCo-oxyhydroxides nanosheets through electric-field assisted hydrolysis. The potential evolution process from MOF bulk to FeCo-oxyhydroxides nanosheets has been investigated in detail. The as-made nanosheets exhibit excellent OER performances, showing an extremely low overpotential of 231 mV at the current density of 10 mA cm⁻², a relatively small Tafel slope of 42 mV dec⁻¹, and long-term durability of at least 30 h. This work not only provides a novel strategy for facile preparation of low-cost and efficient OER electrocatalysts, but also represents a new way for preparation of metal oxyhydroxides nanosheets with good crystallinity and morphology, and a fresh method for mild synthesis of nanosized derivatives from MOF materials.     

Bimetallic Metal‐Organic Framework‐Derived Nanosheet‐Assembled Nanoflower Electrocatalysts for Efficient Oxygen Evolution Reaction

Non‐noble metal‐based metal–organic framework (MOF)‐derived electrocatalysts have recently attracted great interest in the oxygen evolution reaction (OER). Here we report a facile synthesis of nickel‐based bimetallic electrocatalysts derived from 2D nanosheet‐assembled nanoflower‐like MOFs. The optimized morphologies and large Brunauer–Emmett–Teller (BET) surface area endow FeNi@CNF with efficient OER performance, where the aligned nanosheets can expose abundant active sites and benefit electron transfer. The complex nanoflower morphologies together with the synergistic effects between two metals attributed to the OER activity of the Ni‐based bimetallic catalysts. The optimized FeNi@CNF afforded an overpotential of 356 mV at a current density of 10 mA cm^?2 with a Tafel slope of 62.6 mV dec^?1, and also exhibited superior durability with only slightly degradation after 24 hours of continuous operation. The results may inspire the use of complex nanosheet‐assembled nanostructures to explore highly active catalysts for various applications.     

Large‐Scale,Bottom‐Up Synthesis of Binary Metal–Organic Framework Nanosheets for Efficient Water Oxidation

Ultrathin metal–organic framework (MOF) nanosheets (NSs) offer potential for many applications, but the synthetic strategies are largely limited to top‐down, low‐yield exfoliation methods. Herein, Ni–M–MOF (M=Fe, Al, Co, Mn, Zn, and Cd) NSs are reported with a thickness of only several atomic layers, prepared by a large‐scale, bottom‐up solvothermal method. The solvent mixture of N,N‐dimethylacetamide and water plays key role in controlling the formation of these two‐dimensional MOF NSs. The MOF NSs can be directly used as efficient electrocatalysts for the oxygen evolution reaction, in which the Ni–Fe–MOF NSs deliver a current density of 10 mA cm^?2 at a low overpotential of 221 mV with a small Tafel slope of 56.0 mV dec^?1, and exhibit excellent stability for at least 20 h without obvious activity decay. Density functional theory calculations on the energy barriers for OER occurring at different metal sites confirm that Fe is the active site for OER at Ni–Fe–MOF NSs.     

Large‐Scale,Bottom‐Up Synthesis of Binary Metal–Organic Framework Nanosheets for Efficient Water Oxidation

Ultrathin metal–organic framework (MOF) nanosheets (NSs) offer potential for many applications, but the synthetic strategies are largely limited to top‐down, low‐yield exfoliation methods. Herein, Ni–M–MOF (M=Fe, Al, Co, Mn, Zn, and Cd) NSs are reported with a thickness of only several atomic layers, prepared by a large‐scale, bottom‐up solvothermal method. The solvent mixture of N,N‐dimethylacetamide and water plays key role in controlling the formation of these two‐dimensional MOF NSs. The MOF NSs can be directly used as efficient electrocatalysts for the oxygen evolution reaction, in which the Ni–Fe–MOF NSs deliver a current density of 10 mA cm^?2 at a low overpotential of 221 mV with a small Tafel slope of 56.0 mV dec^?1, and exhibit excellent stability for at least 20 h without obvious activity decay. Density functional theory calculations on the energy barriers for OER occurring at different metal sites confirm that Fe is the active site for OER at Ni–Fe–MOF NSs.     

Stable Hierarchical Bimetal–Organic Nanostructures as HighPerformance Electrocatalysts for the Oxygen Evolution Reaction

The integration of heterometallic units and nanostructures into metal–organic frameworks (MOFs) used for the oxygen evolution reaction (OER) can enhance the electrocatalytic performance and help elucidate underlying mechanisms. We have synthesized a series of stable MOFs (CTGU‐10a1–d1) based on trinuclear metal carboxylate clusters and a hexadentate carboxylate ligand with a (6,6)‐connected nia net. We also present a strategy to synthesize hierarchical bimetallic MOF nanostructures (CTGU‐10a2–d2). Among these, CTGU‐10c2 is the best material for the OER, with an overpotential of 240 mV at a current density of 10 mA cm^?2 and a Tafel slope of 58 mV dec^?1. This is superior to RuO₂ and confirms CTGU‐10c2 as one of the few known high‐performing pure‐phase MOF‐OER electrocatalysts. Notably, bimetallic CTGU‐10b2 and c2 show an improved OER activity over monometallic CTGU‐10a2 and d2. Both DFT and experiments show that the remarkable OER performance of CTGU‐10c2 is due to the presence of unsaturated metal sites, a hierarchical nanobelt architecture, and the Ni–Co coupling effect.     

A Surfactant‐Free and Scalable General Strategy for Synthesizing Ultrathin Two‐Dimensional Metal–Organic Framework Nanosheets for the Oxygen Evolution Reaction

Metal–organic framework (MOFs) two‐dimensional (2D) nanosheets have many coordinatively unsaturated metal sites that act as active centres for catalysis. To date, limited numbers of 2D MOFs nanosheets can be obtained through top‐down or bottom‐up synthesis strategies. Herein, we report a 2D oxide sacrifice approach (2dOSA) to facilely synthesize ultrathin MOF‐74 and BTC MOF nanosheets with a flexible combination of metal sites, which cannot be obtained through the delamination of their bulk counterparts (top‐down) or the conventional solvothermal method (bottom‐up). The ultrathin iron–cobalt MOF‐74 nanosheets prepared are only 2.6 nm thick. The sample enriched with surface coordinatively unsaturated metal sites, exhibits a significantly higher oxygen evolution reaction reactivity than bulk FeCo MOF‐74 particles and the state‐of‐the‐art MOF catalyst. It is believed that this 2dOSA could provide a new and simple way to synthesize various ultrathin MOF nanosheets for wide applications.     

Two‐Dimensional Co@N‐Carbon Nanocomposites Facilely Derived from Metal–Organic Framework Nanosheets for Efficient Bifunctional Electrocatalysis

Metal–organic frameworks (MOFs) and MOF‐derived nanomaterials have recently attracted great interest as highly efficient, non‐noble‐metal catalysts. In particular, two‐dimensional MOF nanosheet materials possess the advantages of both 2D layered nanomaterials and MOFs and are considered to be promising nanomaterials. Herein, we report a facile and scalable in situ hydrothermal synthesis of Co–hypoxanthine (HPA) MOF nanosheets, which were then directly carbonized to prepare uniform Co@N‐Carbon nanosheets for efficient bifunctional electrocatalytic hydrogen‐evolution reactions (HERs) and oxygen‐evolution reactions (OERs). The Co embedded in N‐doped carbon shows excellent and stable catalytic performance for bifunctional electrocatalytic OERs and HERs. For OERs, the overpotential of Co@N‐Carbon at 10 mA cm^?2 was 400 mV (vs. reversible hydrogen electrode, RHE). The current density of Co@N‐Carbon reached 100 mA cm^?2 at an overpotential of 560 mV, which showed much better performance than RuO₂; the largest current density of RuO₂ that could be reached was only 44 mA cm^?2. The Tafel slope of Co@N‐Carbon was 61 mV dec^?1, which is comparable to that of commercial RuO₂ (58 mV dec^?1). The excellent electrocatalytic properties can be attributed to the nanosheet structure and well‐dispersed carbon‐encapsulated Co, CoN nanoparticles, and N‐dopant sites, which provided high conductivity and a large number of accessible active sites. The results highlight the great potential of utilizing MOF nanosheet materials as promising templates for the preparation of 2D Co@N‐Carbon materials for electrocatalysis and will pave the way to the development of more efficient 2D nanomaterials for various catalytic applications.     

Nanoscale Trimetallic Metal–Organic Frameworks Enable Efficient Oxygen Evolution Electrocatalysis

Metal–organic frameworks (MOFs) are a class of promising materials for diverse heterogeneous catalysis, but they are usually not directly employed for oxygen evolution electrocatalysis. Most reports focus on using MOFs as templates to in situ create efficient electrocatalysts through annealing. Herein, we prepared a series of Fe/Ni‐based trimetallic MOFs (Fe/Ni/Co(Mn)‐MIL‐53 accordingly to the Material of Institute Lavoisier) by solvothermal synthesis, which can be directly adopted as highly efficient electrocatalysts. The Fe/Ni/Co(Mn)‐MIL‐53 shows a volcano‐type oxygen evolution reaction (OER) activity as a function of compositions. The optimized Fe/Ni_2.4/Co_0.4‐MIL‐53 can reach a current density of 20 mA cm^?2 at low overpotential of 236 mV with a small Tafel slope of 52.2 mV dec^?1. In addition, the OER performance of these MOFs can be further enhanced by directly being grown on nickel foam (NF).     

Multifunctional Active‐Center‐Transferable Platinum/Lithium Cobalt Oxide Heterostructured Electrocatalysts towards Superior Water Splitting

Designing cost‐effective and efficient electrocatalysts plays a pivotal role in advancing the development of electrochemical water splitting for hydrogen generation. Herein, multifunctional active‐center‐transferable heterostructured electrocatalysts, platinum/lithium cobalt oxide (Pt/LiCoO₂) composites with Pt nanoparticles (Pt NPs) anchored on LiCoO₂ nanosheets, are designed towards highly efficient water splitting. In this electrocatalyst system, the active center can be alternatively switched between Pt species and LiCoO₂ for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), respectively. Specifically, Pt species are the active centers and LiCoO₂ acts as the co‐catalyst for HER, whereas the active center transfers to LiCoO₂ and Pt turns into the co‐catalyst for OER. The unique architecture of Pt/LiCoO₂ heterostructure provides abundant interfaces with favorable electronic structure and coordination environment towards optimal adsorption behavior of reaction intermediates. The 30 % Pt/LiCoO₂ heterostructured electrocatalyst delivers low overpotentials of 61 and 285 mV to achieve 10 mA cm^?2 for HER and OER in alkaline medium, respectively.     

Amorphous Metal–Organic Framework‐Dominated Nanocomposites with Both Compositional and Structural Heterogeneity for Oxygen Evolution

Amorphous metal–organic frameworks (aMOFs) are an emerging family of attractive materials with great application potential, however aMOFs are usually prepared under harsh conditions and aMOFs with complex compositions and structures are rarely reported. In this work, an aMOF‐dominated nanocomposite (aMOF‐NC) with both structural and compositional complexity has been synthesized using a facile approach. A ligand‐competition amorphization mechanism is proposed based on experimental and density functional theory calculation results. The aMOF‐NC possesses a core–shell nanorod@nanosheet architecture, including a Fe‐rich Fe‐Co‐aMOF core and a Co‐rich Fe‐Co‐aMOF shell in the core–shell structured nanorod, and amorphous Co(OH)₂ nanosheets as the outer layer. Benefiting from the structural and compositional heterogeneity, the aMOF‐NC demonstrates an excellent oxygen evolution reaction activity with a low overpotential of 249 mV at 10.0 mA cm^?2 and Tafel slope of 39.5 mV dec^?1.     

NiMn‐Based Bimetal–Organic Framework Nanosheets Supported on Multi‐Channel Carbon Fibers for Efficient Oxygen Electrocatalysis

Developing noble‐metal‐free bifunctional oxygen electrocatalysts is of great significance for energy conversion and storage systems. Herein, we have developed a transformation method for growing NiMn‐based bimetal–organic framework (NiMn‐MOF) nanosheets on multi‐channel carbon fibers (MCCF) as a bifunctional oxygen electrocatalyst. Owing to the desired components and architecture, the MCCF/NiMn‐MOFs manifest comparable electrocatalytic performance towards oxygen reduction reaction (ORR) with the commercial Pt/C electrocatalyst and superior performance towards oxygen evolution reaction (OER) to the benchmark RuO₂ electrocatalyst. X‐ray absorption fine structure (XAFS) spectroscopy and density functional theory (DFT) calculations reveal that the strong synergetic effect of adjacent Ni and Mn nodes within MCCF/NiMn‐MOFs effectively promotes the thermodynamic formation of key *O and *OOH intermediates over active NiO₆ centers towards fast ORR and OER kinetics.     

Strong‐Coupled Cobalt Borate Nanosheets/Graphene Hybrid as Electrocatalyst for Water Oxidation Under Both Alkaline and Neutral Conditions

Developing highly active catalysts for the oxygen evolution reaction (OER) is of paramount importance for designing various renewable energy storage and conversion devices. Herein, we report the synthesis of a category of Co‐Pi analogue, namely cobalt‐based borate (Co‐B_i) ultrathin nanosheets/graphene hybrid by a room‐temperature synthesis approach. Benefiting from the high surface active sites exposure yield, enhanced electron transfer capacity, and strong synergetic coupled effect, this Co‐B_i NS/G hybrid shows high catalytic activity with current density of 10 mA cm^?2 at overpotential of 290 mV and Tafel slope of 53 mV dec^?1 in alkaline medium. Moreover, Co‐B_i NS/G electrocatalysts also exhibit promising performance under neutral conditions, with a low onset potential of 235 mV and high current density of 14.4 mA cm^?2 at 1.8 V, which is the best OER performance among well‐developed Co‐based OER electrocatalysts to date. Our finding paves a way to develop highly active OER electrocatalysts.     

Metal–organic framework based bifunctional oxygen electrocatalysts for rechargeable zinc–air batteries: current progress and prospects

Zinc–air batteries (ZABs) are regarded as ideal candidates for next-generation energy storage equipment due to their high energy density, non-toxicity, high safety, and environmental friendliness. However, the slow oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) kinetics on the air cathode limit their efficiency and the development of highly efficient, low cost and stable bifunctional electrocatalysts is still challenging. Metal–Organic Framework (MOF) based bifunctional oxygen electrocatalysts have been demonstrated as promising alternative catalysts due to the regular structure, tunable chemistry, high specific surface area, and simple and easy preparation of MOFs, and great progress has been made in this area. Herein, we summarize the latest research progress of MOF-based bifunctional oxygen electrocatalysts for ZABs, including pristine MOFs, derivatives of MOFs and MOF composites. The effects of the catalysts'' composites, morphologies, specific surface areas and active sites on catalytic performances are specifically addressed to reveal the underlying mechanisms for different catalytic activity of MOF based catalysts. Finally, the main challenges and prospects for developing advanced MOF-based bifunctional electrocatalysts are proposed.

The research progress of MOF-based bifunctional oxygen electrocatalysts for zinc–air batteries is reviewed and the main challenges and prospects for developing advanced MOF-based bifunctional electrocatalysts are proposed.     

Interface‐Engineered Ni(OH)2/β‐like FeOOH Electrocatalysts for Highly Efficient and Stable Oxygen Evolution Reaction

Iron‐based (oxy)hydroxides are especially attractive electrocatalysts for the oxygen evolution reaction (OER) owing to their earth abundance, low cost, and nontoxicity. However, poor OER kinetics on the surface restricts the performance of the FeOOH electrocatalyst. Herein, a highly efficient and stable Ni(OH)₂/β‐like FeOOH electrocatalyst is obtained by facile electroactivation treatment. The activated Ni(OH)₂/β‐like FeOOH sample indicates an overpotential of 300 mV at 10 mA cm⁻² for the OER, and no clear current decay after 50 h of testing; this is comparable to the most efficient nickel‐ and cobalt‐based electrocatalysts on planar substrates. Furthermore, studies suggest that β‐like FeOOH plays a key role in remarkably enhancing the performance during the electroactivation process owing to its metastable tunnel structure with a lower barrier for interface diffusion of Ni²⁺ ions between the bilayer electrocatalyst. This study develops a new strategy to explore efficient and low‐cost electrocatalysts and deepens understanding of bilayer electrocatalysts for the OER.     

Defect Engineered Metal–Organic Framework with Accelerated Structural Transformation for Efficient Oxygen Evolution Reaction

Metal–organic frameworks (MOFs) have been increasingly applied in oxygen evolution reaction (OER), and the surface of MOFs usually undergoes structural transformation to form metal oxyhydroxides to serve as catalytically active sites. However, the controllable regulation of the reconstruction process of MOFs remains as a great challenge. Here we report a defect engineering strategy to facilitate the structural transformation of MOFs to metal oxyhydroxides during OER with enhanced activity. Defective MOFs (denoted as NiFc′_xFc_1-x) with abundant unsaturated metal sites are constructed by mixing ligands of 1,1′-ferrocene dicarboxylic acid (Fc′) and defective ferrocene carboxylic acid (Fc). NiFc′_xFc_1-x series are more prone to be transformed to metal oxyhydroxides compared with the non-defective MOFs (NiFc′). Moreover, the as-formed metal oxyhydroxides derived from defective MOFs contain more oxygen vacancies. NiFc′Fc grown on nickel foam exhibits excellent OER catalytic activity with an overpotential of 213 mV at the current density of 100 mA cm⁻², superior to that of undefective NiFc′. Experimental results and theoretical calculations suggest that the abundant oxygen vacancies in the derived metal oxyhydroxides facilitate the adsorption of oxygen-containing intermediates on active centers, thus significantly improving the OER activity.     

Rapid Synthesis of Cobalt Nitride Nanowires: Highly Efficient and Low‐Cost Catalysts for Oxygen Evolution

Electrochemical splitting of water to produce hydrogen and oxygen is an important process for many energy storage and conversion devices. Developing efficient, durable, low‐cost, and earth‐abundant electrocatalysts for the oxygen evolution reaction (OER) is of great urgency. To achieve the rapid synthesis of transition‐metal nitride nanostructures and improve their electrocatalytic performance, a new strategy has been developed to convert cobalt oxide precursors into cobalt nitride nanowires through N₂ radio frequency plasma treatment. This method requires significantly shorter reaction times (about 1 min) at room temperature compared to conventional high‐temperature NH₃ annealing which requires a few hours. The plasma treatment significantly enhances the OER activity, as evidenced by a low overpotential of 290 mV to reach a current density of 10 mA cm^?2, a small Tafel slope, and long‐term durability in an alkaline electrolyte.     

Electrochemical Exfoliation of Pillared‐Layer Metal–Organic Framework to Boost the Oxygen Evolution Reaction

Two‐dimensional (2D) materials and ultrathin nanosheets are advantageous for elevating the catalysis performance and elucidating the catalysis mechanism of heterogeneous catalysts, but they are mostly restricted to inorganic or organic materials based on covalent bonds. We report an electrochemical/chemical exfoliation strategy for synthesizing metal–organic 2D materials based on coordination bonds. A catechol functionalized ligand is used as the redox active pillar to construct a pillared‐layer framework. When the 3D pillared‐layer MOF serves as an electrocatalyst for water oxidation (pH 13), the pillar ligands can be oxidized in situ and removed. The remaining ultrathin (2 nm) nanosheets of the metal–organic layers are an efficient catalyst with overpotentials as low as 211 mV at 10 mA cm^?2 and a turnover frequency as high as 30 s^?1 at an overpotential of 300 mV.     

Amorphous Nanocages of Cu‐Ni‐Fe Hydr(oxy)oxide Prepared by Photocorrosion For Highly Efficient Oxygen Evolution

Electrochemical water splitting requires efficient, low‐cost water oxidation catalysts to accelerate the sluggish kinetics of the water oxidation reaction. A rapid photocorrosion method is now used to synthesize the homogeneous amorphous nanocages of Cu‐Ni‐Fe hydr(oxy)oxide as a highly efficient electrocatalyst for the oxygen evolution reaction (OER). The as‐fabricated product exhibits a low overpotential of 224 mV on a glassy carbon electrode at 10 mA cm^?2 (even lower down to 181 mV when supported on Ni foam) with a Tafel slope of 44 mV dec^?1 for OER in an alkaline solution. The obtained catalyst shows an extraordinarily large mass activity of 1464.5 A g^?1 at overpotential of 300 mV, which is the highest mass activity for OER. This synthetic strategy may open a brand new pathway to prepare copper‐based ternary amorphous nanocages for greatly enhanced oxygen evolution.     

Thermoplastic Membranes Incorporating Semiconductive Metal–Organic Frameworks: An Advance on Flexible X‐ray Detectors

Semiconductive metal–organic frameworks (MOFs) have emerged in applications such as chemical sensors, electrocatalysts, energy storage materials, and electronic devices. However, examples of semiconductive MOFs within flexible electronics have not been reported. We present flexible X‐ray detectors prepared by thermoplastic dispersal of a semiconductive MOF ( SCU‐13 ) through a commercially available polymer, poly(vinylidene fluoride). The flexible detectors exhibit efficient X‐ray‐to‐electric current conversion with enhanced charge‐carrier mobility and low trap density compared to pelleted devices. A high X‐ray detection sensitivity of 65.86 μCGy_air^?1 cm^?2 was achieved, which outperforms other pelleted devices and commercial flexible X‐ray detectors. We demonstrate that the MOF‐based flexible detectors can be operated at multiple bending angles without a deterioration in detection performance. As a proof‐of‐concept, an X‐ray phase contrast under bending conditions was constructed using a 5×5 pixelated MOF‐based imager.     

Ir Nanoparticles Anchored on Metal-Organic Frameworks for Efficient Overall Water Splitting under pH-Universal Conditions

The construction of high-activity and low-cost electrocatalysts is critical for efficient hydrogen production by water electrolysis. Herein, we developed an advanced electrocatalyst by anchoring well-dispersed Ir nanoparticles on nickel metal-organic framework (MOF) Ni-NDC (NDC: 2,6-naphthalenedicarboxylic) nanosheets. Benefiting from the strong synergy between Ir and MOF through interfacial Ni−O−Ir bonds, the synthesized Ir@Ni-NDC showed exceptional electrocatalytic performance for hydrogen evolution reaction (HER), oxygen evolution reaction (OER) and overall water splitting in a wide pH range, superior to commercial benchmarks and most reported electrocatalysts. Theoretical calculations revealed that the charge redistribution of Ni−O−Ir bridge induced the optimization of H₂O, OH* and H* adsorption, thus leading to the accelerated electrochemical kinetics for HER and OER. This work provides a new clue to exploit bifunctional electrocatalysts for pH-universal overall water splitting.