Multifunctional Active‐Center‐Transferable Platinum/Lithium Cobalt Oxide Heterostructured Electrocatalysts towards Superior Water Splitting

Designing cost‐effective and efficient electrocatalysts plays a pivotal role in advancing the development of electrochemical water splitting for hydrogen generation. Herein, multifunctional active‐center‐transferable heterostructured electrocatalysts, platinum/lithium cobalt oxide (Pt/LiCoO₂) composites with Pt nanoparticles (Pt NPs) anchored on LiCoO₂ nanosheets, are designed towards highly efficient water splitting. In this electrocatalyst system, the active center can be alternatively switched between Pt species and LiCoO₂ for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), respectively. Specifically, Pt species are the active centers and LiCoO₂ acts as the co‐catalyst for HER, whereas the active center transfers to LiCoO₂ and Pt turns into the co‐catalyst for OER. The unique architecture of Pt/LiCoO₂ heterostructure provides abundant interfaces with favorable electronic structure and coordination environment towards optimal adsorption behavior of reaction intermediates. The 30 % Pt/LiCoO₂ heterostructured electrocatalyst delivers low overpotentials of 61 and 285 mV to achieve 10 mA cm^?2 for HER and OER in alkaline medium, respectively.     

Aqueous CO2 Reduction with High Efficiency Using α‐Co(OH)2‐Supported Atomic Ir Electrocatalysts

Electrochemical reduction of CO₂ into energy‐dense chemical feedstock and fuels provides an attractive pathway to sustainable energy storage and artificial carbon cycle. Herein, we report the first work to use atomic Ir electrocatalyst for CO₂ reduction. By using α‐Co(OH)₂ as the support, the faradaic efficiency of CO could reach 97.6 % with a turnover frequency (TOF) of 38290 h^?1 in aqueous electrolyte, which is the highest TOF up to date. The electrochemical active area is 23.4‐times higher than Ir nanoparticles (2 nm), which is highly conductive and favors electron transfer from CO₂ to its radical anion (CO₂^.?). Moreover, the more efficient stabilization of CO₂^.? intermediate and easy charge transfer makes the atomic Ir electrocatalyst facilitate CO production. Hence, α‐Co(OH)₂‐supported atomic Ir electrocatalysts show enhanced CO₂ activity and stability.     

From a Molecular 2Fe‐2Se Precursor to a Highly Efficient Iron Diselenide Electrocatalyst for Overall Water Splitting

A highly active FeSe₂ electrocatalyst for durable overall water splitting was prepared from a molecular 2Fe‐2Se precursor. The as‐synthesized FeSe₂ was electrophoretically deposited on nickel foam and applied to the oxygen and hydrogen evolution reactions (OER and HER, respectively) in alkaline media. When used as an oxygen‐evolution electrode, a low 245 mV overpotential was achieved at a current density of 10 mA cm⁻², representing outstanding catalytic activity and stability because of Fe(OH)₂/FeOOH active sites formed at the surface of FeSe₂. Remarkably, the system is also favorable for the HER. Moreover, an overall water‐splitting setup was fabricated using a two‐electrode cell, which displayed a low cell voltage and high stability. In summary, the first iron selenide material is reported that can be used as a bifunctional electrocatalyst for the OER and HER, as well as overall water splitting.     

Identification of Key Reversible Intermediates in Self‐Reconstructed Nickel‐Based Hybrid Electrocatalysts for Oxygen Evolution

The oxygen evolution reaction (OER) has been explored extensively for reliable hydrogen supply to boost the energy conversion efficiency. The superior OER performance of newly developed non‐noble metal electrocatalysts has concealed the identification of the real active species of the catalysts. Now, the critical active phase in nickel‐based materials (represented by NiNPS) was directly identified by observing the dynamic surface reconstruction during the harsh OER process via combining in situ Raman tracking and ex situ microscopy and spectroscopy analyses. The irreversible phase transformation from NiNPS to α‐Ni(OH)₂ and reversible phase transition between α‐Ni(OH)₂ and γ‐NiOOH prior to OER demonstrate γ‐NiOOH as the key active species for OER. The hybrid catalyst exhibits 48‐fold enhanced catalytic current at 300 mV and remarkably reduced Tafel slope to 46 mV dec^?1, indicating the greatly accelerated catalytic kinetics after surface evolution.     

NiMn‐Based Bimetal–Organic Framework Nanosheets Supported on Multi‐Channel Carbon Fibers for Efficient Oxygen Electrocatalysis

Developing noble‐metal‐free bifunctional oxygen electrocatalysts is of great significance for energy conversion and storage systems. Herein, we have developed a transformation method for growing NiMn‐based bimetal–organic framework (NiMn‐MOF) nanosheets on multi‐channel carbon fibers (MCCF) as a bifunctional oxygen electrocatalyst. Owing to the desired components and architecture, the MCCF/NiMn‐MOFs manifest comparable electrocatalytic performance towards oxygen reduction reaction (ORR) with the commercial Pt/C electrocatalyst and superior performance towards oxygen evolution reaction (OER) to the benchmark RuO₂ electrocatalyst. X‐ray absorption fine structure (XAFS) spectroscopy and density functional theory (DFT) calculations reveal that the strong synergetic effect of adjacent Ni and Mn nodes within MCCF/NiMn‐MOFs effectively promotes the thermodynamic formation of key *O and *OOH intermediates over active NiO₆ centers towards fast ORR and OER kinetics.     

Bimetallic Metal‐Organic Framework‐Derived Nanosheet‐Assembled Nanoflower Electrocatalysts for Efficient Oxygen Evolution Reaction

Non‐noble metal‐based metal–organic framework (MOF)‐derived electrocatalysts have recently attracted great interest in the oxygen evolution reaction (OER). Here we report a facile synthesis of nickel‐based bimetallic electrocatalysts derived from 2D nanosheet‐assembled nanoflower‐like MOFs. The optimized morphologies and large Brunauer–Emmett–Teller (BET) surface area endow FeNi@CNF with efficient OER performance, where the aligned nanosheets can expose abundant active sites and benefit electron transfer. The complex nanoflower morphologies together with the synergistic effects between two metals attributed to the OER activity of the Ni‐based bimetallic catalysts. The optimized FeNi@CNF afforded an overpotential of 356 mV at a current density of 10 mA cm^?2 with a Tafel slope of 62.6 mV dec^?1, and also exhibited superior durability with only slightly degradation after 24 hours of continuous operation. The results may inspire the use of complex nanosheet‐assembled nanostructures to explore highly active catalysts for various applications.     

Controlled Synthesis of 3D Flower‐like Ni2P Composed of Mesoporous Nanoplates for Overall Water Splitting

Developing efficient non‐noble metal and earth‐abundant electrocatalysts with tunable microstructures for overall water splitting is critical to promote clean energy technologies for a hydrogen economy. Herein, novel three‐dimensional (3D) flower‐like Ni₂P composed of mesoporous nanoplates with controllable morphology and high surface area was prepared by a hydrothermal method and low‐temperature phosphidation as efficient electrocatalysts for the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). Compared with the urchin‐like Ni_x P_y , the 3D flower‐like Ni₂P with a diameter of 5 μm presented an efficient and stable catalytic performance in 0.5 m H₂SO₄, with a small Tafel slope of 79 mV dec⁻¹ and an overpotential of about 240 mV at a current density of 10 mA cm⁻² with a mass loading density of 0.283 mg cm⁻². In addition, the catalyst also exhibited a remarkable performance for the OER in 1.0 m KOH electrolyte, with an overpotential of 320 mV to reach a current density of 10 mA cm⁻² and a small Tafel slope of 72 mV dec⁻¹. The excellent catalytic performance of the as‐prepared Ni₂P may be ascribed to its novel 3D morphology with unique mesoporous structure.     

Interface Engineering of MoS2/Ni3S2 Heterostructures for Highly Enhanced Electrochemical Overall‐Water‐Splitting Activity

To achieve sustainable production of H₂ fuel through water splitting, low‐cost electrocatalysts for the hydrogen‐evolution reaction (HER) and the oxygen‐evolution reaction (OER) are required to replace Pt and IrO₂ catalysts. Herein, for the first time, we present the interface engineering of novel MoS₂/Ni₃S₂ heterostructures, in which abundant interfaces are formed. For OER, such MoS₂/Ni₃S₂ heterostructures show an extremely low overpotential of ca. 218 mV at 10 mA cm^?2, which is superior to that of the state‐of‐the‐art OER electrocatalysts. Using MoS₂/Ni₃S₂ heterostructures as bifunctional electrocatalysts, an alkali electrolyzer delivers a current density of 10 mA cm^?2 at a very low cell voltage of ca. 1.56 V. In combination with DFT calculations, this study demonstrates that the constructed interfaces synergistically favor the chemisorption of hydrogen and oxygen‐containing intermediates, thus accelerating the overall electrochemical water splitting.     

Amorphous Nanocages of Cu‐Ni‐Fe Hydr(oxy)oxide Prepared by Photocorrosion For Highly Efficient Oxygen Evolution

Electrochemical water splitting requires efficient, low‐cost water oxidation catalysts to accelerate the sluggish kinetics of the water oxidation reaction. A rapid photocorrosion method is now used to synthesize the homogeneous amorphous nanocages of Cu‐Ni‐Fe hydr(oxy)oxide as a highly efficient electrocatalyst for the oxygen evolution reaction (OER). The as‐fabricated product exhibits a low overpotential of 224 mV on a glassy carbon electrode at 10 mA cm^?2 (even lower down to 181 mV when supported on Ni foam) with a Tafel slope of 44 mV dec^?1 for OER in an alkaline solution. The obtained catalyst shows an extraordinarily large mass activity of 1464.5 A g^?1 at overpotential of 300 mV, which is the highest mass activity for OER. This synthetic strategy may open a brand new pathway to prepare copper‐based ternary amorphous nanocages for greatly enhanced oxygen evolution.     

Pomegranate‐Inspired Design of Highly Active and Durable Bifunctional Electrocatalysts for Rechargeable Metal–Air Batteries

Rational design of highly active and durable electrocatalysts for oxygen reactions is critical for rechargeable metal–air batteries. Herein, we report the design and development of composite electrocatalysts based on transition metal oxide nanocrystals embedded in a nitrogen‐doped, partially graphitized carbon framework. Benefiting from the unique pomegranate‐like architecture, the composite catalysts possess abundant active sites, strong synergetic coupling, enhanced electron transfer, and high efficiencies in the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). The Co₃O₄‐based composite electrocatalyst exhibited a high half‐wave potential of 0.842 V for ORR, and a low overpotential of only 450 mV at the current density of 10 mA cm^?2 for OER. A single‐cell zinc–air battery was also fabricated with superior durability, holding great promise in the practical implementation of rechargeable metal–air batteries.     

Facile In Situ Synthesis of Hierarchical Porous Ni/Ni(OH)2 Hybrid Sponges with Excellent Electrochemical Energy‐Storage Performances for Supercapacitors

Herein, we report the in situ growth of single‐crystalline Ni(OH)₂ nanoflakes on a Ni support by using facile hydrothermal processes. The as‐prepared Ni/Ni(OH)₂ sponges were well‐characterized by using X‐ray diffraction (XRD), SEM, TEM, and X‐ray photoelectron spectroscopy (XPS) techniques. The results revealed that the nickel‐skeleton‐supported Ni(OH)₂ rope‐like aggregates were composed of numerous intercrossed single‐crystal Ni(OH)₂ flake‐like units. The Ni/Ni(OH)₂ hybrid sponges served as electrodes and displayed ultrahigh specific capacitance (SC=3247 F g^?1) and excellent rate‐capability performance, likely owing to fast electron and ion transport, sufficient Faradic redox reaction, and robust structural integrity of the Ni/Ni(OH)₂ hybrid electrode. These results support the promising application of Ni(OH)₂ nanoflakes as advanced pseudocapacitor materials.     

2D Metal–Organic Framework Derived CuCo Alloy Nanoparticles Encapsulated by Nitrogen-Doped Carbonaceous Nanoleaves for Efficient Bifunctional Oxygen Electrocatalyst and Zinc–Air Batteries

The development of efficient bifunctional electrocatalysts for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) still remains a challenge in a wide range of renewable energy technologies. Herein, CuCo alloy nanoparticles encapsulated by nitrogen-doped carbonaceous nanoleaves (CuCo-NC) have been synthesized from a Cu(OH)₂/2D leaf-like zeolitic imidazolate framework (ZIF-L)-pyrolysis approach. Leaf-like Cu(OH)₂ is first prepared by the ultrasound-induced self-assembly of Cu(OH)₂ nanowires. The efficient encapsulation of Cu(OH)₂ in ZIF-L is obtained owing to the morphology fitting between the leaf-like Cu(OH)₂ and ZIF-L. CuCo-NC catalysts present superior electrocatalytic activity and stability toward ORR and OER over the commercial Pt/C and IrO₂, respectively, which are further used as bifunctional oxygen electrocatalysts in Zn–air batteries and exhibit impressive performance, with a high peak power density of 303.7 mW cm⁻², large specific capacity of up to 751.4 mAh g⁻¹ at 20 mA cm⁻², and a superior recharge stability.     

Channel‐Rich RuCu Nanosheets for pH‐Universal Overall Water Splitting Electrocatalysis

Channel‐rich RuCu snowflake‐like nanosheets (NSs) composed of crystallized Ru and amorphous Cu were used as efficient electrocatalysts for oxygen evolution reaction (OER), hydrogen evolution reaction (HER), and overall water splitting in pH‐universal electrolytes. The optimized RuCu NSs/C‐350 °C and RuCu NSs/C‐250 °C show attractive activities of OER and HER with low overpotentials and small Tafel slopes, respectively. When applied to overall water splitting, the optimized RuCu NSs/C can reach 10 mA cm^?2 at cell voltages of only 1.49, 1.55, 1.49 and 1.50 V in 1 m KOH, 0.1 m KOH, 0.5 m H₂SO₄ and 0.05 m H₂SO₄, respectively, much lower than those of commercial Ir/C∥Pt/C. The optimized electrolyzer exhibits superior durability with small potential change after up to 45 h in 1 m KOH, showing a class of efficient functional electrocatalysts for overall water splitting.     

NixCo3‐xO4 Nanoneedle Arrays Grown on Ni Foam as an Efficient Bifunctional Electrocatalyst for Full Water Splitting

Developing highly active, stable and robust electrocatalysts based on earth‐abundant elements for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) is important for many renewable energy conversion processes. Herein, Ni_xCo_3‐xO₄ nanoneedle arrays grown on 3D porous nickel foam (NF) was synthesized as a bifunctional electrocatalyst with OER and HER activity for full water splitting. Benefiting from the advantageous structure, the composite exhibits superior OER activity with an overpotential of 320 mV achieving the current density of 10 mA cm^?2. An exceptional HER activity is also acquired with an overpotential of 170 mV at the current density of 10 mA cm^?2. Furthermore, the catalyst also shows the superior activity and stability for 20 h when used in the overall water splitting cell. Thus, the hierarchical 3D structure composed of the 1D nanoneedle structure in Ni_xCo_3‐xO₄/NF represents an avenue to design and develop highly active and bifunctional electrocatalysts for promising energy conversion.     

Ir Nanoparticles Anchored on Metal-Organic Frameworks for Efficient Overall Water Splitting under pH-Universal Conditions

The construction of high-activity and low-cost electrocatalysts is critical for efficient hydrogen production by water electrolysis. Herein, we developed an advanced electrocatalyst by anchoring well-dispersed Ir nanoparticles on nickel metal-organic framework (MOF) Ni-NDC (NDC: 2,6-naphthalenedicarboxylic) nanosheets. Benefiting from the strong synergy between Ir and MOF through interfacial Ni−O−Ir bonds, the synthesized Ir@Ni-NDC showed exceptional electrocatalytic performance for hydrogen evolution reaction (HER), oxygen evolution reaction (OER) and overall water splitting in a wide pH range, superior to commercial benchmarks and most reported electrocatalysts. Theoretical calculations revealed that the charge redistribution of Ni−O−Ir bridge induced the optimization of H₂O, OH* and H* adsorption, thus leading to the accelerated electrochemical kinetics for HER and OER. This work provides a new clue to exploit bifunctional electrocatalysts for pH-universal overall water splitting.     

Crystallinity-Modulated Electrocatalytic Activity of a Nickel(II) Borate Thin Layer on Ni3B for Efficient Water Oxidation

The exploration of new efficient OER electrocatalysts based on nonprecious metals and the understanding of the relationship between activity and structure of electrocatalysts are important to advance electrochemical water oxidation. Herein, we developed an efficient OER electrocatalyst with nickel boride (Ni₃B) nanoparticles as cores and nickel(II) borate (Ni-B_i) as shells (Ni-B_i@NB) via a very simple and facile aqueous reaction. This electrocatalyst exhibited a small overpotential of 302 mV at 10 mA cm⁻² and Tafel slope of 52 mV dec⁻¹. More interestingly, it was found that the OER activity of Ni-B_i@NB was closely dependent on the crystallinity of the Ni-B_i shells. The partially crystalline Ni-B_i catalyst exhibited much higher activity than the amorphous or crystalline analogues; this higher activity originated from the enhanced intrinsic activity of the catalytic sites. These findings open up opportunities to explore nickel(II) borates as a new class of efficient nonprecious metal OER electrocatalysts, and to improve the electrocatalyst performance by modulating their crystallinity.     

Molecular Mixed‐Metal Manganese Oxido Cubanes as Precursors to Heterogeneous Oxygen Evolution Catalysts

Well‐defined mixed‐metal [CoMn₃O₄] and [NiMn₃O₄] cubane complexes were synthesized and used as precursors for heterogeneous oxygen evolution reaction (OER) electrocatalysts. The discrete clusters were dropcasted onto glassy carbon (GC) and indium tin oxide (ITO) electrodes, and the OER activities of the resulting films were evaluated. The catalytic surfaces were analyzed by various techniques to gain insight into the structure‐function relationships of the electrocatalysts’ heterometallic composition. Depending on preparation conditions, the Co‐Mn oxide was found to change metal composition during catalysis, while the Ni–Mn oxides maintained the NiMn₃ ratio. XAS studies provided structural insights indicating that the electrocatalysts are different from the molecular precursors, but that the original NiMn₃O₄ cubane‐like geometry was maintained in the absence of thermal treatment ( 2‐Ni ). In contrast, the thermally generated 3‐Ni develops an oxide‐like extended structure. Both 2‐Ni and 3‐Ni undergo structural changes upon electrolysis, but they do not convert into the same material. The observed structural motifs in these heterogeneous electrocatalysts are reminiscent of the biological oxygen‐evolving complex in Photosystem II, including the MMn₃O₄ cubane moiety. The reported studies demonstrate the use of discrete heterometallic oxide clusters as precursors for heterogeneous water oxidation catalysts of novel composition and the distinct behavior of two sets of mixed metal oxides.     

Double Perovskite LaFexNi1−xO3 Nanorods Enable Efficient Oxygen Evolution Electrocatalysis

Perovskite‐based electrocatalysts are one of the most promising materials for oxygen evolution reaction (OER), but their activity and durability are still far from desirable. Herein, we demonstrate that the double perovskite LaFe_xNi_1?xO₃ (LFNO) nanorods (NRs) can be adopted as highly active and stable OER electrocatalysts. The optimized LFNO‐II NRs with Ni/Fe ratio of 8:2 achieve a low overpotential of 302 mV at 10 mA cm^?2 and a small Tafel slope of 50 mV dec^?1, outperforming those of the commercial Ir/C. The LFNO‐II NRs also show high OER stability with slight current decrease after 20 h. The enhanced activity is explained by the improved surface area, tailored electronic structure as well as strong hybridization between O and Ni.     

Hierarchical NiCo2O4 Hollow Microcuboids as Bifunctional Electrocatalysts for Overall Water‐Splitting

Bifunctional electrocatalysts for the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) in alkaline electrolyte may improve the efficiency of overall water splitting. Nickel cobaltite (NiCo₂O₄) has been considered a promising electrode material for the OER. However, NiCo₂O₄ that can be used as an electrocatalyst in HER has not been studied yet. Herein, we report self‐assembled hierarchical NiCo₂O₄ hollow microcuboids for overall water splitting including both the HER and OER reactions. The NiCo₂O₄ electrode shows excellent activity toward overall water splitting, with 10 mA cm^?2 water‐splitting current reached by applying just 1.65 V and 20 mA cm^?2 by applying just 1.74 V across the two electrodes. The synthesis of NiCo₂O₄ microflowers confirms the importance of structural features for high‐performance overall water splitting.     

Efficient electrocatalytic oxygen evolution at ultra-high current densities over 3D Fe,N doped Ni(OH)2 nanosheets

Developing highly efficient nickel or iron based hydroxide electrocatalysts is primary essential but challenging for oxygen evolution reaction (OER) at ultra-high current densities. Herein, we developed a facile method to prepare nitrogen and iron doped nickel(II) hydroxide nanosheets on self-supported conductive nickel foam (denoted as Fe,N-Ni(OH)₂/NF) through ammonia hydrothermal and impregnation methods. Owing to the optimization of the electronic structure by nitrogen doping and the strong synergistic effect between Fe and Ni(OH)₂, the three-dimensional (3D) Fe,N-Ni(OH)₂/NF nanosheets delivered superior electrocatalytic OER performances in basic solution with low potentials of 1.57 V and 1.59 V under 500 mA/cm² and 1000 mA/cm² respectively and robust operation for 10 h with ignored activity decay, comparing well with the potentials of previously reported NiFe based electrocatalysts as well as the benchmark commercial Ir/C/NF. In-situ Raman spectroscopy revealed that the main active species were NiOOH during the OER process. The present results are expected to provide new insights into the study of OER process towards ultra-high current densities.