CexTh1-xO2固溶体的制备和表征

采用柠檬酸法制备了CexTh1-xO2固溶体, 并对固溶体的结构和还原性能进行了表征. 结果表明, 在焙烧过程ThO2和CeO2很容易相互形成立方相的CexTh1-xO2固溶体. 随着Th含量的增加, CexTh1-xO2固溶体的晶胞参数变大. 当形成固溶体时, 经过高温焙烧后固溶体的晶粒明显小于单组分的CeO2和ThO2, 其中Ce0.5Th0.5O2的晶粒最小, 表明CexTh1-xO2固溶体的形成提高了催化剂的抗烧结. Raman光谱表明复合氧化物能促进氧缺位的形成. CexTh1-xO2固溶体的程序升温还原结果表明, 样品有2个还原峰 (α和β), α峰归属为表面Ce4 的还原; β峰归属为体相CeO2的还原. 固溶体的形成使得还原温度降低, 促进CeO2的还原.     

Pt/γ-Al2O3/CexZr1-xO2催化剂低温催化燃烧去除饮食油烟

以CexZr1-xO2固溶体做载体,制备了系列Pt/γ-Al2O3/CexZr1-xO2催化剂(x=1,0.75,0.5,0.25,0).应用Brunauer-Emmet-Teller(BET)比表面积分析、X射线衍射(XRD)和H2程序升温还原(H2-TPR)等手段对催化剂进行相关表征,并系统研究了催化剂在饮食油烟催化燃烧中的催化活性.BET结果表叫催化剂的比表面积随Ce/Zr摩尔比的减小而减小.XRD结果表明贵金属Pt很好地分散在氧化铝和CexZr1-xO2固溶体上.H2-TPR结果发现催化剂Pt/γ-Al2O3/Ce0.5Zr0.5O2的还原峰面积最大且氧离子的流动性最好.催化活性研究结果表明Pt负载在CexZr1-xO2固溶体上有利于油烟的催化燃烧,降低了反应温度.随着CexZr1-xO2固溶体中Ce/Zr摩尔比的变化,催化剂的活性顺序为Pt/γ-Al2O3/Ce0.5Zr0.5O2＞Pt/γ-Al2O3/Ce0.25Zr0.75O2＞Pt/γ-Al2O3/Ce0.75Zr0.25O2＞Pt/γ-Al2O3/CeO2＞Pt/γ-Al2O3/ZrO2.     

Pt/γ-Al2O3/CexZr1-xO2催化剂低温催化燃烧去除饮食油烟（英文）

以CexZr1-xO2固溶体做载体,制备了系列Pt/γ-Al2O3/CexZr1-xO2催化剂（x=1,0.75,0.5,0.25,0）.应用Brunauer-Emmet-Teller（BET）比表面积分析、X射线衍射（XRD）和H2程序升温还原（H2-TPR）等手段对催化剂进行相关表征,并系统研究了催化剂在饮食油烟催化燃烧中的催化活性.BET结果表明催化剂的比表面积随Ce/Zr摩尔比的减小而减小.XRD结果表明贵金属Pt很好地分散在氧化铝和CexZr1-xO2固溶体上.H2-TPR结果发现催化剂Pt/γ-Al2O3/Ce0.5Zr0.5O2的还原峰面积最大且氧离子的流动性最好.催化活性研究结果表明Pt负载在CexZr1-xO2固溶体上有利于油烟的催化燃烧,降低了反应温度.随着CexZr1-xO2固溶体中Ce/Zr摩尔比的变化,催化剂的活性顺序为Pt/γ-Al2O3/Ce0.5Zr0.5O2〉Pt/γ-Al2O3/Ce0.25Zr0.75O2〉Pt/γ-Al2O3/Ce0.75Zr0.25O2〉Pt/γ-Al2O3/CeO2〉Pt/γ-Al2O3/ZrO2.     

Pt/γ-Al2O3/CexZr1-xO2催化剂低温催化燃烧去除饮食油烟

以CexZr1-xO2固溶体做载体, 制备了系列Pt/γ-Al2O3/CexZr1-xO2催化剂(x=1, 0.75, 0.5, 0.25, 0). 应用Brunauer-Emmet-Teller (BET)比表面积分析、X射线衍射(XRD)和H2程序升温还原(H2-TPR)等手段对催化剂进行相关表征, 并系统研究了催化剂在饮食油烟催化燃烧中的催化活性. BET结果表明催化剂的比表面积随Ce/Zr摩尔比的减小而减小. XRD结果表明贵金属Pt很好地分散在氧化铝和CexZr1-xO2固溶体上. H2-TPR结果发现催化剂Pt/γ-Al2O3/Ce0.5Zr0.5O2的还原峰面积最大且氧离子的流动性最好. 催化活性研究结果表明Pt负载在CexZr1-xO2固溶体上有利于油烟的催化燃烧, 降低了反应温度. 随着CexZr1-xO2固溶体中Ce/Zr摩尔比的变化, 催化剂的活性顺序为Pt/γ-Al2O3/Ce0.5Zr0.5O2>Pt/γ-Al2O3/Ce0.25Zr0.75O2>Pt/γ-Al2O3/Ce0.75Zr0.25O2>Pt/γ-Al2O3/CeO2>Pt/γ-Al2O3/ZrO2.     

Ce-Sn-O复合氧化物的制备和表征

采用柠檬酸法制备了CexSn1-xO2复合氧化物，并对复合氧化物的结构和还原性能进行了表征。结果表明，少量Sn能取代CeO2晶格中Ce原子形成立方相的固溶体，并使晶胞参数变小；Sn超过20％时形成混合相。650℃焙烧的CexSn1-xO2复合氧化物有3个还原峰（α、β和γ）。α峰归属为表面Sn^4 的还原（－330℃）；β峰归属为体相SnO2和表面Ce^4 （－630℃）的还原；γ峰归属为体相CeO2的还原。焙烧温度的提高使得β峰增强，α峰变弱，γ峰几乎不变；而低温焙烧有利于CexSn1-xO2固溶体的形成，再氧化处理对样品的还原性能有很大的影响。     

CeO2-MOx（M=La^3＋,Ca^2＋）改性Pd/γ-Al2O3催化甲烷燃烧性能

采用沉积-沉淀法制备了固溶体CeO2-MOx=(M=La3+,Ca2+)改性的Pd/γ-Al2O3催化剂,利用XRD、Raman和XPS对催化剂进行了表征.结果表明,金属(M)离子进入CeO2的晶格,形成CeO2-MOx固溶体,Raman谱上463cm-1处对应于Ce-O键的F2g对称伸缩振动强度降低.其中,样品Pd/γ-Al2O3CeO2-CaO在615 cm-1处出现一小峰,样品Pd/γ-Al2O3-CeO2-La2O3在320cm-1处出现的肩峰,都表明固溶体CeO2-MOx的形成使O2-亚晶格结构对称性降低.XPS分析表明,固溶体改性的Pd/γ-Al2O3催化剂中Pd的3d5/2结合能比正常价态的PdO的结合能高出0.5-0.6 eV,形成了一种高度离子化的.与载体具有强相互作用的Pd物种.催化甲烷燃烧实验证明,固溶体CeO2-MOx(M=La3+,Ca2+)改性的Pd/γ-Al2O3催化剂的低温活性和稳定性均高于未经改性的Pd/γ-Al2O3催化剂和仅用CeO2改性的Pd/γAl2O3催化剂,在空速为50000 h-1时,可使1%CH4-99%空气(体积分数)混合气中甲烷的10%转化温度降至254℃,转化率100%时的转化温度降至340℃.     

醋酸钾溶液体系中α-Fe_2O_3纳米微球的离子液体辅助合成及气敏性能研究

以Fe Cl3·6H2O和CH3COOK为反应物,以离子液体1-丁基-3-甲基咪唑氯化物([Bmim]Cl)为结构导向剂和表面活性剂,采用水热合成法在150℃反应8 h制备出结晶度好、形貌规整,直径为10~30 nm的α-Fe2O3纳米微球.考察了[Bmim]Cl的添加量对氧化铁形貌和气敏性能的影响.气敏性能测试结果表明:当离子液体添加量为12 mmol时,α-Fe2O3纳米微球对乙醇的气敏性能最佳.在工作温度为300℃时,对50μL/L乙醇的灵敏度达到7.56,是不添加离子液体时制备的α-Fe2O3的5.6倍,在10~200μL/L的检测范围内灵敏度与浓度具有良好的线性关系(R=98.8%),并且具有良好的选择性和稳定性.本文还详细探讨了α-Fe2O3纳米微球对乙醇的敏感机理,以及工作温度对其气敏性能的影响.     

三维有序大孔α-Fe2O3的制备及电化学性能研究

通过聚苯乙烯(PS)胶晶模板法合成了三维有序大孔(3DOM) α-Fe2O3, 运用扫描电镜、热重分析、X射线衍射、电化学充放电等多种方法对其结构和性能进行了表征和研究. SEM表明PS 胶晶模板和3DOM α-Fe2O3呈周期性排列. 合成的3DOM α-Fe2O3为三维有序多孔网状结构, 具有球型和六边形的孔隙形貌, 其孔径大小约为(115±10) nm; 孔壁由α-Fe2O3纳米晶粒组成, 壁厚为20～30 nm. XRD图谱表明经过煅烧除去模板后, 形成了纯α-Fe2O3相. 当3DOM α-Fe2O3作为锂离子电池负极材料时, 首次放电充电容量分别高达1880和1130 mAh•g－1, 20次循环后可逆容量依然高达631 mAh•g－1, 库仑效率大于90%.     

载体对负载型金催化剂上甲醛催化氧化的影响

采用沉积.沉淀法和氨水络合法制备了Al2O3,TiO2,CeO2和SiO2负载的纳米金催化剂,利用元素分析、x射线衍射、氮气物理吸附、程序升温还原、透射电镜和拉曼光谱等技术对催化剂进行了表征,并考察了其低温催化甲醛氧化活性.结果表明,Au/CeO2的催化性能最佳,在40℃时甲醛转化率仍能保持在80%以上.催化剂的活性同时受Au的化学状态和载体性质的影响.Au/CeO2催化剂较高的低温活性可能与离子态的Au物种有关,同时AuxCe1-xO2-δ固溶体的形成产生了大量的氧缺位,提高了氧的活化能力,也有助于提高催化剂的低温活性.     

CeO2-MOx (M=La3+, Ca2+)改性Pd/γ-Al2O3催化甲烷燃烧性能

采用沉积-沉淀法制备了固溶体CeO2-MOx(M=La3+, Ca2+)改性的Pd/γ-Al2O3催化剂, 利用XRD、Raman和XPS对催化剂进行了表征. 结果表明, 金属(M)离子进入CeO2的晶格, 形成CeO2-MOx固溶体, Raman谱上463 cm-1处对应于Ce—O键的F2g对称伸缩振动强度降低. 其中, 样品Pd/γ-Al2O3-CeO2-CaO在615 cm-1处出现一小峰, 样品Pd/γ-Al2O3-CeO2-La2O3在320 cm-1处出现的肩峰, 都表明固溶体CeO2-MOx的形成使O2-亚晶格结构对称性降低. XPS分析表明, 固溶体改性的Pd/γ-Al2O3催化剂中Pd 的3d5/2结合能比正常价态的PdO的结合能高出0.5-0.6 eV, 形成了一种高度离子化的, 与载体具有强相互作用的Pd物种. 催化甲烷燃烧实验证明, 固溶体CeO2-MOx(M=La3+, Ca2+)改性的Pd/γ-Al2O3催化剂的低温活性和稳定性均高于未经改性的Pd/γ-Al2O3催化剂和仅用CeO2改性的Pd/γ-Al2O3催化剂, 在空速为50000 h-1时, 可使1%CH4-99%空气(体积分数)混合气中甲烷的10%转化温度降至254 ℃, 转化率100%时的转化温度降至340 ℃.     

Preparation of mesoporous Ce<Subscript>1 − <Emphasis Type="Italic">x</Emphasis></Subscript>Fe<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>O<Subscript>2</Subscript> mixed oxides and their catalytic properties in methane combustion

Mesoporous Ce_{1 ? x} Fe _x O₂ mixed oxide catalysts of different molar ratios (x = 0.1–0.5) were prepared by the citric acid sol-gel method and the microwave technique. The activities of Ce_{1 ? x} Fe _x O₂ mixed oxides on methane combustion were investigated, and the structure and reductive properties were characterized by XRD, BET, DRS, and TPR. The data showed that Ce_{1 ? x} Fe _x O₂ mixed oxides prepared were mesoporous material. When x ≤ 0.2, the transition metal Fe incorporated into the lattice of CeO₂ to form cubic Ce_{1 ? x} Fe _x O₂ solid solutions, and mixed phases of cubic Ce_{1 ? x} Fe _x O₂ solid solutions and α-Fe₂O₃ existed when x > 0.2. Ce_{1 ? x} Fe _x O₂ solid solutions show higher activity for methane combustion than pure CeO₂, especially for Ce_0.9Fe_0.1O₂.     

Properties of the perovskites, SrMn1−xFexO3−δ (x=1/3, 1/2, 2/3)

The SrMn_1−xFe_xO_3−δ (x=1/3, 1/2, 2/3) phases have been prepared and are shown by powder X-ray and neutron (for x=1/2) diffraction to adopt an ideal cubic perovskite structure with a disordered distribution of transition-metal cations over the six-coordinate B-site. Due to synthesis in air, the phases are oxygen deficient and formally contain both Fe³⁺ and Fe⁴⁺. Magnetic susceptibility data show an antiferromagnetic transition at 180 and 140 K for x=1/3 and 1/2, respectively and a spin-glass transition at 5, 25, 45 K for x=1/3, 1/2 and 2/3, respectively. The magnetic properties are explained in terms of super-exchange interactions between Mn⁴⁺, Fe^(4+δ)+ and Fe⁽³⁺⁾⁺. The XAS results for the Mn-sites in these compounds indicate small Mn-valence changes, however, the Mn-pre-edge spectra indicate increased localization of the Mn-e_g orbitals with Fe substitution. The Mössbauer results show the distinct two-site Fe⁽³⁺⁾+/Fe^(4+δ)+ disproportionation in the Mn- substituted materials with strong covalency effects at both sites. This disproportionation is a very concrete reflection of a localization of the Fe-d states due to the Mn-substitution.     

Local structure analysis of Bi2(Ga1-xFex)4O9 mullite-type solid solutions synthesized via combination of ball milling and thermal treatment

Mullite-type Bi₂(Ga_1-xFe_x)₄O₉ solid solutions, with 0.1 ≤ x ≤ 0.9, have been synthesized by a combination of mechanical and thermal treatments of a Bi₂O₃/Ga₂O₃/α-Fe₂O₃ stoichiometric mixture. The microstructure of the as-prepared materials on the long-range and local atomic scales was investigated by X-ray diffraction and ⁵⁷Fe Mössbauer spectroscopy, respectively. The XRD data analysis revealed in all cases linear dependence of the lattice parameters related on x. Due to the ability of the applied Mössbauer spectroscopy to probe the local environment of Fe cations, the local structural disorder in investigated solid solutions is provided. It was shown that the presence of Fe³⁺ cations in octahedral sites of the orthorhombic structure causes a local distortion of polyhedra in the material. The preferential occupation of Fe in octahedral site was revealed. Detailed quantitative information on both the cation distribution and the bond lengths provided is discussed in relation to the derived hyperfine parameters.     

合成方法对Rh/CeO2-ZrO2-La2O3催化剂的结构、表面性能及DeNOx活性的影响

用沉积沉淀法合成两种不同系列的CeO2-ZrO2-La2O3混合氧化物(ZrO2和La2O3沉积CeO2粒子(标记为A-x)以及CeO2和La2O3沉积ZrO2粒子(标记为B-x)),并用作Rh催化剂的载体。XRD、拉曼、TPR、XPS和O2脉冲等表征结果显示出不同的沉积顺序将导致不同的结构和氧化还原性能,且B-x具有更高的氧迁移性、储氧能力和表面Ce浓度。当其负载Rh后,Rh/B-x催化剂具有更高的NO和CO转化率及N2选择性,且Ce的最佳含量为50at%。这可能归因于Rh负载于富铈表面形成更多有利于NO分解的表面Ce3+活性位。     

Nanocrystalline ferrites NixZn1−xFe2O4: Influence of cation distribution on acidic and gas sensing properties

This work is devoted to a detailed analysis of the interconnection between composition, cation distribution and acidic properties of the surface of nanocrystalline ferrites Ni_xZn_1−xFe₂O₄ obtained by aerosol pyrolysis. The detailed analysis of the Mössbauer spectra allows us to determine the distribution of cations between tetrahedral and octahedral positions in spinel structure. Depending on samples composition, the tetrahedral positions can be occupied by only Fe³⁺ cations (inverse spinel, x≥0.4) or by Fe³⁺ and Zn²⁺ cations (mixed spinel, x=0, 0.2). Increasing the nickel concentration in the ferrite leads to decrease in the number of strong acid centers on the surface. It was found that the decrease in the contribution of strong surface acid sites leads to an increase in sensory sensitivity of the ferrite towards ammonia. For ethanol detection an inverse relationship between sensor signal and surface acidity was observed.     

Y2SiO5:Ce3+荧光体的基质多面体替换及其对发光性能的调控研究

荧光材料基质的结构调制对于调控发光材料的发光性能,探索固体结构-性能关系具有重要的研究意义。本文以Y2SiO5基质为模型,分别利用Si/Al和Si/P取代,以[AlO4]和[PO4]四面体替换[SiO4]四面体,设计合成了一系列组成为Y1.95Si1-xAlxO5-xFx∶0.05Ce3+(x=0.05,x=0.1,x=0.2,x=0.4,x=1)和Y1.95-yCaySi1-yPyO5∶0.05Ce3+(y=0,y=0.02,y=0.04,y=0.06,y=0.08,y=0.2)的荧光材料。结合X射线衍射、荧光光谱、荧光寿命等测试手段对其进行了表征分析。结果表明,在x≤0.2,y≤0.04时得到的产物能够保持Y2SiO5的结构特征,在一定的基质组成替换范围内,设计合成的样品Y1.95Si1-xAlxO5-xFx∶0.05Ce3+、Y1.95-yCaySi1-yPyO5∶0.05Ce3+能提高发光强度,发射光谱呈现蓝移现象。荧光寿命测试表明这两个系列的化合物中Ce3+所处的基质环境变化较小,Ce3+发光也未产生较大的变化。     

Pillaring of Layered Perovskites, K1−xLaxCa2−xNb3O10, with Nanosized Fe2O3 Particles

Nanosized Fe₂O₃ clusters are pillared in the interlayer spaces of layered perovskites, H_1−xLa_xCa_2−xNb₃O₁₀ (0≤x≤0.75) by a guest-exchange reaction using the trinuclear acetato-hydroxo iron cation, [Fe₃(OCOCH₃)₇ OH·2H₂O]⁺. The interlayer spaces of niobate layers are pre-expanded with n-butylammonium cations (n-C₄H₉NH⁺₃), which are subsequently replaced by bulky iron pillaring species to form Fe(III) complex intercalated layer niobates. Upon heating at 380°C, the interlayered acetato-hydroxo iron complexes are converted into Fe₂O₃ nanoclusters with a thickness of ca. 3.5 Å irrespective of the interlayer charge density (x). The band-gap energy of the Fe₂O₃ pillars (E_g2.25 eV) is slightly larger than that of bulk Fe₂O₃ (E_g2.20 eV) but is smaller than that expected for such a small-sized semiconductor, which can be assigned to the pancake-shaped Fe₂O₃ pillars of 3.5 Å in height with comparatively large lateral dimension. X-ray absorption spectroscopic measurements at the Fe K-edge are carried out in order to obtain structural information on the Fe₂O₃ pillars stabilized between the niobate layers. XANES analysis reveals that the interlayer FeO₆ octahedra have coordination environments similar to that of bulk α-Fe₂O₃, but noncentrosymmetric distortion of interlayered FeO₆ is enhanced due to the asymmetric electric potential exerted by the negatively charged niobate layers. Scanning electron microscopic observation and nitrogen adsorption–desorption isotherm measurement suggest that the pillared derivatives are nanoporous materials with the highest BET specific surface area of ca. 116 m²/g.     

AxMn1-xFe2O4铁氧体(A=Zn,Ni)中阳离子的占位有序化行为研究

基于尖晶石晶体结构信息,本文采用热力学三亚晶格模型,将材料热力学计算和第一性原理计算相结合,研究了Zn_xMn_(1-x) Fe_2O_4和Ni_xMn_(1-x)Fe_2O_4立方相中的Zn~(2+)、Ni~(2+)、Mn~(2+)以及Fe~(3+)在8a和16d亚晶格上的占位有序化行为。结果表明:在锰铁氧体中,室温下Mn~(2+)完全占据在8a亚晶格上,Fe~(3+)完全占据在16d亚晶格上,属于正尖晶石结构;随着热处理温度升高,在1 273 K达到热处理平衡时的占位构型为(Fe~(3+)0.09Mn~(2+)0.91)[Fe~(3+)1.91Mn~(2+)0.09]O_4,在热处理温度升至1 473 K时,达到热处理平衡时的占位构型为(Fe~(3+)0.11Mn~(2+)0.89)[Fe~(3+)1.89Mn~(2+)0.11]O_4,均与实验结果符合较好。在锌铁氧体中,室温下Zn~(2+)完全占据在8a亚晶格上,Fe~(3+)完全占据在16d亚晶格上,属于正尖晶石结构;在热处理温度较高时,Zn~(2+)和Fe~(3+)发生部分置换,符合实验结果。在镍铁氧体中,半数的Fe~(3+)在室温下占据在8a亚晶格上,Ni~(2+)与剩下另一半的Fe~(3+)共同占据在16d亚晶格上,仅在热处理温度较高的时候发生微弱变化,亦与已有的实验结果吻合。在此基础上,本文进一步通过热力学模型研究了立方相尖晶石结构的Zn_xMn_(1-x)Fe_2O_4、Ni_xMn_(1-x)Fe_2O_4复合体系中阳离子占位行为与热处理温度对占位的影响规律。     

Catalytic Hydrogenation of Acetic Acid to Acetaldehyde: Synergistic Effect of Bifunctional Co/Ce‐Fe Oxide Solid Solution Catalysts

The large‐scale industrial production of acetic acid (HAc) from carbonylation of methanol has enabled intense research interest from direct hydrogenation of HAc to acetaldehyde (AA). Herein, a series of cerium‐iron oxide solid solution supported metallic cobalt catalysts were prepared by modified sol‐gel method and were applied in gas‐phase hydrogenation of HAc to AA. A synergistic effect between the hydrogenation metal cobalt and Ce‐Fe oxide solid solution is revealed. Specifically, oxygen vacancies provide the active sites for adsorption of HAc, while highly uniformly dispersed metallic Co adsorbs H₂ and activates the reduction of HAc into AA. Moreover, the metallic Co can also assist the cyclical conversion between Fe³⁺/Fe²⁺ and Ce³⁺/Ce⁴⁺ on the surface of Ce_1‐xFe_xO_2‐δ supports. The unique effect substantially enhances the ability of the support material to rapidly capture oxygen atoms from HAc. It is found that the catalyst of 5% Co/Ce_0.8Fe_0.2O_2‐δ with the highest concentration of oxygen vacancy presents the best catalytic performance (i.e. acetaldehyde yield reaches 49.9%) under the optimal reaction conditions (i.e. 623 K and H₂ flow rate = 10 mL/min). This work indicates that the Co/Ce‐Fe oxide solid solution catalyst can be potentially used for the selective hydrogenation from HAc to AA. The synergy between the metallic Co and Ce_1‐xFe_xO_2‐δ revealed can be extended to the design of other composite catalysts.     

Mössbauer study of the FeV2O4---Fe3O4 system

Mössbauer spectra of the Fe_1+xV_2−xO₄ spinel solid solutions are taken to investigate the cation distribution. Room temperature spectra can be interpreted by assuming that the cation distribution is represented approximately as Fe²⁺[Fe³⁺_xV³⁺_2−x]O₄ for 0 x 0.35 and Fe³⁺[Fe²⁺Fe³⁺_x−1V³⁺_2−x]O₄ for 1 x 2 and the ionic valence arrangement changes from the 2-3-3 type (Fe²⁺[Fe³⁺_xV³⁺_2−x]O₄) to the 3-2-3 one (Fe³⁺[Fe²⁺V³⁺]O₄) in the range 0.35 x 1. Fe₂VO₄ is found to be 3-2-3 spinel, Fe³⁺[Fe²⁺V³⁺]O₄. Its paramagnetic spectrum at 473°K is, however, composed of a broad single line with isomer shift value of 0.61 mm/sec relative to stainless steel, in which the line splitting due to the ferric and ferrous ions is rendered indistinguishable.