水溶性CdSe/CdS量子点的合成及其与牛血清蛋白的共轭作用

用巯基乙酸(TGA)作为稳定剂，合成了水溶性的CdSe和核壳结构的CdSe/CdS半导体量子点。吸收光谱和荧光光谱研究表明，核壳结构的CdSe/CdS半导体量子点比单一的CdSe量子点具有更优异的发光特性。用TEM、电子衍射(ED)和XPS分别表征了CdSe和CdSe/CdS纳米微粒的结构、形貌及分散性。红外光谱和核磁共振谱证实了巯基乙酸分子中的硫原子和氧原子与纳米微粒表面的金属离子发生了配位作用。在pH值为7.4的条件下，将合成的CdSe和CdSe/CdS量子点直接与牛血清白蛋白(BSA)相互作用。实验发现，两种量子点均对BSA的荧光产生较强的静态猝灭作用；而BSA对两种量子点的荧光则具有显著的荧光增敏作用，存在BSA时CdSe/CdS量子点的荧光增强是不存在BSA时体系荧光强度的3倍。     

水溶性的CdSe/CdS/ZnS量子点的合成及表征

用L-半胱氨酸盐(Cys)作为稳定剂,合成了水溶性的双壳结构的CdSe/CdS/ZnS半导体量子点。吸收光谱和荧光光谱结果表明,双壳结构的CdSe/CdS/ZnS纳米微粒比单一的CdSe核纳米粒子和单核壳结构的CdSe/CdS纳米粒子具有更优异的发光特性。用透射电子显微镜(TEM)、ED、XRD、XPS和FTIR等方法对CdSe核和双壳层的CdSe/CdS/ZnS纳米微粒的结构、分散性及形貌分别进行了表征。     

Investigation of dynamics of radiolytic formation of CdSe nanoparticles in aqueous solutions

The formation of cadmium selenide, CdSe, nanoparticles in aqueous solutions containing equimolar ammoniated cadmium sulfate, [Cd(NH(3))](4)SO(4) and sodium selenosulfate, Na(2)SeSO(3) as the starting materials, has been investigated by electron pulse radiolysis coupled with kinetic spectrometry. The formation of CdSe nanoparticles was found to proceed through the generation of short-lived transient intermediate species having an absorption peak at 520 nm, which is formed only upon the reaction of hydrated electrons, e(aq) with the precursor ions under deaerated conditions. The transient intermediate species decays with a weighted average rate constant, 1.2 × 10(7) s(-1). The transient intermediate species formed in the case of individual precursors did not match with the transients formed when both the precursors are taken together in the solutions under the present experimental conditions. The reaction rate constants between the precursor ions, [Cd(NH(3))(4)](2+) and the transient intermediate species formed from [SeSO(3)](2-) was 1.9 × 10(10) M(-1) s(-1). Similarly, the reaction rate constants between the precursor ions, [SeSO(3)](2-) and the transient intermediate species formed from [Cd(NH(3))(4)](2+) was 5.5 × 10(10) M(-1) s(-1). This clearly indicates that the formation of CdSe nanoparticles occurs through both reaction channels. However, the major reaction channel is through the reaction of e(aq) with the [Cd(NH(3))(4)](2+) ions (k = 3.1 × 10 (10) M(-1) s(-1)), as its rate constant is one order higher than that of the reaction of e(aq) with the [SeSO(3)](2-) ions (k = 2.3 × 10(9) M(-1) s(-1)).     

Systematic study on structural phase behavior of CdSe thin films

Cadmium selenide (CdSe) thin films were chemically deposited at room temperature, from aqueous ammoniacal solution using Cd(CH(3)COO)(2) as Cd2+ and Na(2)SeSO(3) as Se2- ion sources. The as-deposited films were uniform, well adherent to the glass substrate, specularly reflective, and red-orange in color. The as-deposited CdSe layers grew with nanocrystalline sphalerite cubic structure along with the amorphous phase present in it, with optical band gap E(g) = 2.3 eV. The films were annealed in air atmosphere for 4 h at different temperatures and characterized for compositional, structural, morphological, and optical properties. XRD and SEM studies clearly revealed the systematic phase transformation of CdSe films from metastable nanocrystalline cubic (zinc blende type) to a mixture of cubic and hexagonal (wurtzite type), and finally into stable hexagonal through different intermediate phases with an improvement in the crystal quality. The films showed a red shift in their optical spectra after annealing.     

Water-soluble CdSe and CdSe/CdS nanocrystals: a greener synthetic route

We report a new green synthetic route of CdSe and core-shell CdSe/CdS nanoparticles (NPs) in aqueous solutions. This route is performed under water-bath temperature, using Se powder as a selenium source to prepare CdSe NPs, and H(2)S generated by the reaction of Na(2)SH(2)SO(4) as a sulfur source to synthesize core-shell CdSe/CdS NPs at 25-35 degrees C. The synthesis time of every step is only 20 min. After illumination with ambient natural light, photoluminescence (PL) intensities of CdSe NPs enhanced up to 100 times. The core-shell CdSe/CdS NPs have stronger photoactive luminescence with quantum yields over 20%. The obtained CdSe NPs exhibit a favorable narrow PL band (FWHM: 50-37 nm) with increasing molar ratio of Cd/Se from 4:1 to 10:1 at pH 9.1 in the crude solution, whereas PL band of corresponding CdSe/CdS NPs is slightly narrower. The emission maxima of nanocrystals can be tuned in a wider range from 492 to 592 nm in water by changing synthesis temperature of CdSe core than those reported previously. The resulting new route is of particular interest as it uses readily-available reagents and simple equipment to synthesize high-quality water-soluble CdSe and CdSe/CdS nanocrystals.     

水溶性CdSe/CdS纳米晶合成条件的优化研究

以巯基乙醇为修饰剂,在水溶液中合成了稳定的CdSe/CdS纳米晶,应用单因素法和多目标单纯形法探索合成条件。通过透射电镜观察所合成的纳米晶的形貌和大小,用紫外-可见吸收光谱和荧光光谱对其光学特性进行了表征。并且以L-色氨酸荧光量子产率0.14为标准,测量了合成的CdSe/CdS纳米晶的荧光量子产率为0.37。     

Aqueous synthesis of type-II core/shell CdTe/CdSe quantum dots for near-infrared fluorescent sensing of copper(II)

Type-II core/shell CdTe/CdSe quantum dots (QDs) were synthesized in aqueous medium by employing thiol-capped CdTe QDs as core template and CdCl(2) and Na(2)SeSO(3) as shell precursors, respectively. Compared with the original CdTe cores, the core/shell CdTe/CdSe QDs showed an obvious red-shifted emission with the color-tune capability to the near-infrared (NIR) wavelength, because of the formation of an indirect excitation. The prepared QDs exhibited high stability and moderate fluorescence quantum yields (10-20%), and their core/shell heterostructure was characterized by UV-vis absorption, steady-state and time-resolved fluorescence spectra, X-ray powder diffraction, X-ray photoelectron spectroscopy and high-resolution transmission electron microscopy. The fluorescence of the core/shell QDs could be markedly quenched by Cu(II), and approximate concentrations of other physiologically important cations, such as Zn(II), Ca(II), Na(I) and K(I) etc., had no effect on the fluorescence. Based on this, a simple and rapid method for Cu(II) determination was proposed using the NIR CdTe/CdSe QDs as fluorescent probes. Under optimal conditions, the response was linearly proportional to the concentration of Cu(II) between 0.05 to 50.0 x 10(-6) mol L(-1), the limit of detection was 2.0 x 10(-8) mol L(-1). The developed method was successfully applied to the detection of trace Cu(II) in real samples.     

Inorganic cluster syntheses of TM2+-doped quantum dots (CdSe, CdS, CdSe/CdS): physical property dependence on dopant locale

A series of colloidal transition-metal-doped chalcogenide semiconductor nanocrystals (TM2+:CdSe, TM2+:CdS, etc.) has been prepared by thermal decomposition of inorganic cluster precursors. It is shown through extensive spectroscopic and structural characterization that the nanocrystals prepared following literature procedures for synthesis of TM2+:CdSe nanocrystals actually possess an unintended CdSe/TM2+:CdS core/shell morphology. The conditions required for successful formation of TM2+:CdSe and TM2+:CdS by cluster decomposition have been determined. Magneto-optical and photoluminescence spectroscopic results for this series of doped nanocrystals reveal major physical consequences of dopant localization within the shell and demonstrate the capacity to engineer dopant-carrier exchange interactions via core/shell doping strategies. The results presented here illustrate some of the remarkable and unexpected complexities that can arise in nanocrystal doping chemistries and emphasize the need for meticulous characterization to avoid false positives.     

Photocatalytic Synthesis of Composite CdSe/CdS Nanoparticles

We have shown that CdSe/CdS nanocomposites can be obtained in a photocatalytic reaction with participation of CdS nanoparticles from sodium selenosulfate. We have studied the kinetic characteristics of this process in detail and have shown that its most likely mechanism includes a step involving reaction between SeSO^3/2− anions and electrons generated in the conduction band of the CdS nanoparticles during irradiation and stabilized in traps on the semiconductor surface.__________Translated from Teoreticheskaya i Eksperimental’naya Khimiya, Vol. 41, No. 3, pp. 171–175, May–June, 2005.     

Toward highly efficient CdS/CdSe quantum dots-sensitized solar cells incorporating ordered photoanodes on transparent conductive substrates

A series of ordered photoanodic architectures (including ordered TiO(2) nanotube arrays (TNT), ZnO nanorods, ZnO/TiO(2) core/shell nanostructures) for CdS/CdSe sensitized solar cells (QDSCs), were fabricated directly on transparent conductive oxide glasses by a facile sol-gel assisted template process. The morphologies, optical and electrical properties of TNTs and CdS/CdSe co-sensitized TNTs have been demonstrated. The effect of CdSe deposition time on the cell performance was clarified, and the growth mechanism of the CdSe quantum dots on the surface of the TNTs has been proposed as well. Furthermore, the evolution of open-circuit photovoltage (V(oc)) towards CdSe deposition time has been investigated by electrochemical impedance spectroscopy (EIS). A promising light-to-electricity conversion efficiency of up to 4.61% has been achieved with 3 μm long TNT arrays, which is the best record for sandwich-type ordered TNT-based QDSCs.     

Different Mixing Types CdSe‐CdS Nanocomposites

The optical properties of 2 mixing types of CdS‐CdSe nanoparticles (i.e., coprecipitated CdS‐CdSe nanoparticles, CdS‐coated CdSe (CdSe/CdS)) were studied. Results indicated that the co‐precipitated nanoparticles kept the similar optical properties of both CdS and CdSe's, while the CdS/CdSe core‐shell structure showed totally different optical properties from the simple components. We paid special attention to the core/shell structure, as the core‐shell structure showed a better passivating effect. Therefore, the XRD and TEM were tested on the core‐shell structure. XRD results showed that the diffraction patterns of core‐shell structure were roughly the same as their simple components. And the TEM indicated the core‐shell structure had a uniform dispersion in the solution.     

Aqueous synthesis of CdSe and CdSe/CdS quantum dots with controllable introduction of Se and S sources

A new and convenient route is developed to synthesize CdSe and core-shell CdSe/CdS quantum dots(QDs) in aqueous solution.The gaseous precursors,H2Se and H2S,generated on-line by reducing SeO 3 2à with NaBH 4 and the reaction between Na 2 S and diluted H2SO 4,are used to form high-quality CdSe and CdSe/CdS QDs,respectively.The synthesized water-soluble CdSe and CdSe/CdS QDs possess high quantum yield(3% and 20%) and narrow full-width-at-half-maximum(43 nm and 38 nm).The synthesis process is easily reproducible with simple apparatus and low-toxic chemicals,and can be readily extended to the large-scale aqueous synthesis of QDs.     

Fabrication of CdSe composite by using the amphiphilic block copolymer as template

CdSe nanoparticles of improved stability against aggregation were synthesized by using amphiphilic block copolymer polyacrylonitrile-block-poly(ethylene glycol)-block-polyacrylonitrile (PAN-b-PEG-b-PAN, PEA). The products were characterized by X-ray diffraction (XRD), high-resolution transmission electron microscopic (HRTEM). The optical properties were characterized by UV-vis spectrophotometer and the room temperature photoluminescence (PL). The results revealed that the CdSe nanoparticles have been uniformly distributed throughout the copolymer with diameters of 6-7 nm and the produced novel hybrid nanocomposites displayed obviously quantum size effects and interesting fluorescence features. FTIR results provided the information on the interaction between the copolymer and the nanoparticles. The TGA revealed that the thermal property of the copolymer enhanced due to the interaction of the nanoparticles and the groups of the copolymer.     

High-efficiency cascade CdS/CdSe quantum dot-sensitized solar cells based on hierarchical tetrapod-like ZnO nanoparticles

Quantum dot-sensitized solar cells (QDSCs) constructed using cascade CdS/CdSe sensitizers and the novel tetrapod-like ZnO nanoparticles have been fabricated. The cascade co-sensitized QDSCs manifested good electron transfer dynamics and overall power conversion efficiency, compared to single CdS- or CdSe-sensitized cells. The preliminary CdS layer is not only energetically favorable to electron transfer but behaves as a passivation layer to diminish the formation of interfacial defects during CdSe synthesis. On the other hand, the anisotropic tetrapod-like ZnO nanoparticles, with a high electron diffusion coefficient, can afford a better carrier transport than traditional ZnO nanoparticles. The resultant solar cell yielded an excellent performance with a solar power conversion efficiency of 4.24% under simulated one sun (AM1.5G, 100 mW cm(-2)) illumination.     

Planar polarized light emission from CdSe nanoparticle clusters

This paper describes synthesis and optical properties of planar clusters of CdSe nanocrystals. The clusters emit linearly polarized light in the plane of the cluster. The emission wavelength of the clusters can be adjusted between 568 and 639 nm with the size of the CdSe nanocrystals. Planar CdSe microclusters were synthesized by reaction of trioctylphosphine oxide-coated CdSe/CdS nanocrystals with 3-aminopropylsilyl-modified Ca(2)Nb(3)O(10) nanosheets in THF. The clusters are 3.92 +/- 1.18 mum length/width and 91 +/- 37 nm thickness, and they consist of alternating layers of Ca(2)Nb(3)O(10) to which CdSe nanocrystals are attached with densities of 5300 +/-310 particles per side of a single Ca(2)Nb(3)O(10) sheet. The chemical inertness of the clusters in coordinating solvents suggests covalent interactions between the aminopropyl groups and CdSe nanocrystals. Upon excitation at lambda(exc) = 400 nm, the clusters emit green (568 nm), orange (589 nm), or red (639 nm) light, depending on the size of the CdSe crystals. The light is emitted preferentially in the cluster plane and it is linearly polarized along the cluster edges. Combined fluorescence microscopy and atomic force microscopy reveal that the directional emission efficiency depends linearly on the thickness of the clusters, which varies between 70 and 180 nm. The ability to manipulate the direction and polarization of the photoemission of CdSe nanoparticles via assembly into 2D structures is of interest for applications of these and similar structures in advanced optical materials and devices.     

CdS和CdSe新型纳米结构的高效溶剂热合成

采用快速高效的溶剂热法合成了海星形CdS纳米结构和一维CdSe纳米结构。用XRD、SEM和UV-Vis等表征手段对产物进行了表征，结果表明产物为单一的CdS和CdSe纳米结构，且CdS纳米结构具有良好的分散性，其形成极大地受到pH值影响，而CdSe先形成层状的二维结构、再形成一维纳米结构。     

介观结构SiO2/CdO纳米复合物为前驱体原位水热合成半导体CdSe和CdS纳米晶

以高度有序的介观结构SiO₂/CdO纳米复合物为前驱体,在硒源或硫源存在的还原性条件下,利用原位水热反应,合成了介观结构SiO₂/CdSe及SiO₂/CdS纳米复合物,除去SiO₂后,得到半导体CdSe及CdS纳米晶.通过X射线衍射(XRD),高分辨率透射电镜(HRTEM),X射线能散射谱(EDX)及选区电子衍射(SAED)等手段对产物进行了组成和结构表征.结果表明,介观结构SiO₂主体材料在合成过程中起到了一定的形貌和尺寸限制作用,得到的CdSe和CdS均为直径在8 nm左右的类球形六方相纳米晶.     

水溶性的CdSe/ZnS纳米微粒的合成及表征

用L-半胱氨酸(Cys)作为稳定剂，合成了水溶性的CdSe/ZnS核壳结构的半导体纳米微粒。吸收光谱和荧光光谱表明，CdSe/ZnS纳米微粒比单一的CdSe纳米粒子具有更优异的发光特性。透射电子显微镜（TEM）、ED和XPS表征了CdSe/ZnS纳米微粒的结构、分散性及形貌。红外光谱证实半胱氨酸分子中的硫原子和氧原子参加了与纳米粒子表面的金属离子的配位作用。     

Preparation, characterization, and optical, electrochemical property research of CdS/PAM nanocomposites

CdS/PAM nanocomposites have been successfully synthesized in situ via a ultrasound-assisted route under ambient condition, employing CdCl(2) and Na(2)S(2)O(3) as Cd(2+) and S(2-) ion sources and acrylamide (AM) and (NH(4))(2)S(2)O(8) as organic monomers and initiating reagents, respectively. The results from X-ray powder diffraction (XRD) analysis and the IR spectrum of the final product showed the formation of CdS nanoparticles and the polymerization of AM monomers. SEM observations showed that the CdS/PAM nanocomposites could film on the quartz substrate and some holes in which many nanorods regularly arranged distributed on the film. The UV-vis absorption and PL spectra of CdS/PAM nanocomposites obviously differed from those of CdS nanoparticles prepared under the same conditions due to the presence of PAM. The electrochemical research showed that CdS/PAM nanocomposites had a stronger ability to promote electron transfers between Hb and the Au electrode than CdS nanoparticles prepared under the same conditions. A possible formation mechanism was also suggested based on the results of experiments.     

A novel ultrasound-assisted approach to the synthesis of CdSe and CdS nanoparticles

Hexagonal CdSe and hexagonal CdS nanoparticles have been prepared using Cd(Ac)₂ and less hazardous elemental Se or S as precursors, respectively, with the aid of ultrasound irradiation under an atmosphere of H₂/Ar (5/95, V/V). The products consist of 7-10 nm nanocrystallites which aggregated in the form of polydispersive nanoclusters with sizes in the range 30-40 nm in the case of CdSe, and near monodispersive nanoclusters with a mean size of about 40 nm in the case of CdS. X-ray diffraction, high-resolution TEM and SAED patterns (selected area electron diffraction patterns) show that the as-prepared particles are well crystallized. X-ray photoelectron spectroscopy (XPS) measurements further confirm the formation of CdSe and CdS. Diffuse reflection spectra indicate that both the CdSe and the CdS nanocryslallites are direct band-gap semiconductors with band-gap values of about 1.83 and 2.62 eV, respectively. Control experiments demonstrate that the hydrogen is the reducing agent, and the extreme high temperature induced by the collapse of the bubble accelerates the reduction of elemental Se or S by hydrogen. An ultrasound assisted in situ reduction/combination mechanism is proposed.