Cellulase production and regulation byAgaricus bisporus

Cellulose is degraded during the growth of the cultivated mushroomA. bisporus on composted straw. At the time of sporophore enlargement, a marked increase in extracellular endocellulase activity occurs. A high level of enzyme activity is maintained during subsequent cropping cycles. Some of the factors affecting growth and production of extracellular endocellulase activity byA. bisporus cultured in simple defined liquid media have been examined. Endocellulase production by the fungus closely paralleled mycelial growth in cultures containing microcrystalline cellulose. The enzyme was induced by various celluloses and cellobiose. In the presence of a cellulose inducer, glucose and cellobiose repressed enzyme production. Endocellulase activity in culture filtrates was inversely related to cellulose concentration in the culture. Although the activity of free enzyme was low, in high concentrations of cellulose more cellulose was degraded. Evidence was obtained for the existence of two forms of endocellulase activity. One form adsorbed strongly to cellulose and was predominant in cultures low in cellulose. In cultures with a high cellulose content, a nonadsorbable form of the enzyme was more abundant. It is suggested that the pattern of cellulase activities produced whenA. bisporus is grown on different concentrations of cellulose is partly accounted for by its adsorption to the cellulose.     

Quantitative determination of cellulose accessibility to cellulase based on adsorption of a nonhydrolytic fusion protein containing CBM and GFP with its applications

Heterogeneous cellulose accessibility is an important substrate characteristic, but all methods for determining cellulose accessibility to the large-size cellulase molecule have some limitations. Characterization of cellulose accessibility to cellulase (CAC) is vital for better understanding of the enzymatic cellulose hydrolysis mechanism (Zhang and Lynd, Biotechnol. Bioeng. 2004, 88, 797-824; 2006, 94, 888-898). Quantitative determination of cellulose accessibility to cellulase (m2/g of cellulose) was established based on the Langmuir adsorption of the fusion protein containing a cellulose-binding module (CBM) and a green fluorescent protein (GFP). One molecule of the recombinant fusion protein occupied 21.2 cellobiose lattices on the 110 face of bacterial cellulose nanofibers. The CAC values of several cellulosic materials -- regenerated amorphous cellulose (RAC), bacterial microcrystalline cellulose (BMCC), Whatman No. 1 filter paper, fibrous cellulose powder (CF1), and microcrystalline cellulose (Avicel) -- were 41.9, 33.5, 9.76, 4.53, and 2.38 m2/g, respectively. The CAC value of amorphous cellulose made from Avicel was 17.6-fold larger than that of crystalline cellulose - Avicel. Avicel enzymatic hydrolysis proceeded with a transition from substrate excess to substrate limited. The declining hydrolysis rates over conversion are mainly attributed to a combination of substrate consumption and a decrease in substrate reactivity. Declining heterogeneous cellulose reactivity is significantly attributed to a loss of CAC where the easily hydrolyzed cellulose fraction is digested first.     

Study of the thermodynamics of adsorption of hydrolyzed modified polyacrylnitrile

The thermodynamics of adsorption has been studied of hydrolyzed modified polyacrylnitrile (HMP) in water solutions with a concentration ranging from 0.25 g/l to 2.00 g/l on bleached sulphate and unbleached and bleached sulphite celluloses at temperatures of 0, 20, 40, and 60 C.It has been established that with the rise in temperature, the amount of adsorbed polymer —(HMP) decreases. The values of the enthalpy change are negative and show a linear decrease with the increase in the amount of adsorbed polymer. The adsorption equilibrium is defined by the logarithmic isotherm of Tjumkin, valid for uniform heterogeneous surfaces.With the increase in the amount of adsorbed HMP the values of the entropy change become negative and linearly decrease. A compensation effect has been noticed which results from the simultaneous action of the entropy and energy factors.The values of the change of the chemical potential for the three types of cellulose are negative and linearly decrease with the increase in the amount of adsorbed HMP and with the rise in temperature.     

Enzymatic hydrolysis of cellulose hydrates

We prepared two cellulose hydrates, Na-cellulose IV and cellulose II hydrate, along with their respective anhydrous forms, cellulose II and II′, from microcrystalline cellulose. X-ray diffractometry analysis showed that the structure of the hydrophobic stacking sheet was conserved in the samples, but the distance between the sheets was in the order: cellulose II hydrate > Na-cellulose IV > cellulose II and II′. The hydrates exhibited an expanded structure compared with the anhydrous form from the incorporation of hydrate water, and cellulose II hydrate contained more hydrate water than Na-cellulose IV. Enzymatic hydrolysis of the samples was carried out at 37 °C using solutions comprising a mixture of cellulase and β-glucosidase. The hydrates were hydrolyzed more efficiently than the anhydrous forms, and cellulose II hydrate showed a more efficient hydrolysis than Na-cellulose IV. This result also agrees well with the enzymatic adsorption properties of each sample, where the samples that adsorbed the greater amount of enzyme showed a higher degradability. The results obtained in this study provide useful knowledge on controlling the biodegradability of cellulose by converting its structure.     

The mechanism of consumption of ceric salt with cellulosic materials

Efforts were made in the present study to elucidate the mechanism of graft copolymerization of cellulose in the presence of a ceric salt as initiator. When cellulose is treated with an aqueous solution of the ceric salt, ceric ion is consumed in a roughly first-order reaction in the oxidation of cellulose and in the adsorption on cellulose, and the ratio of the rate constants of oxidation and adsorption is about 1:3 in the case of sulfite pulp. Ceric ion is adsorbed so strongly on cellulose as not to be readily desorbed by treatment with water, dilute acid, or dilute alkali. The number of moles of adsorbed ceric ion was approximately equal to the number of moles of the total carbonyl groups in the cases of cotton and sulfite pulp, which are low in hemicellulose content, and was several times as large in the cases of kraft pulp and semichemical pulp, which contain about 22% hemicellulose. In these samples, however, it was interesting to note that the amount of the adsorbed ceric ion was roughly equal to the amount consumed in oxidation. Cellulose on which ceric ion is adsorbed reacts with methyl methacrylate to yield graft copolymers; a higher molecular weight of grafts, smaller number of grafts, and lower graft efficiency than in a standard polymerization were observed. Since the stability of the adsorbed ceric ion is high, a contribution of the adsorbed ceric ion to the graft copolymerization appears small, and the oxidation reaction, which proceeds slightly more slowly than adsorption, seems more important to the graft copolymerization.     

Simultaneous saccharification and cofermentation of dilute-acid pretreated yellow poplar hardwood to ethanol using xylose-fermenting Zymomonas mobilis

Simultaneous saccharification and cofermentation (SSCF) was carried out at approximately 15% total solids using conditioned dilute-acid pretreated yellow poplar feedstock, an adapted variant of National Renewable Energy Laboratory (NREL) xylose-fermenting Zymomonas mobilis and either commercial or NREL-produced cellulase enzyme preparations. In 7 d, at a cellulase loading of 12 filter paper units pergram cellulose (FPU/g), the integrated system produced more than 3% w/v ethanol and achieved 54% conversion of all potentially available biomass sugars (total sugars) entering SSCF. A control SSCF employing Sigmacell cellulose and a commercial cellulase at an enzyme loading of 14 FPU/gachieved 65% conversion of total sugars to ethanol.     

Quartz crystal microbalance with dissipation monitoring and surface plasmon resonance studies of carboxymethyl cellulose adsorption onto regenerated cellulose surfaces

Adsorption of anionic polyelectrolytes, sodium salts of carboxymethyl celluloses (CMCs) with different degrees of substitution (DS = 0.9 and 1.2), from aqueous electrolyte solutions onto regenerated cellulose surfaces was studied using quartz crystal microbalance with dissipation monitoring (QCM-D) and surface plasmon resonance (SPR) experiments. The influence of both calcium chloride (CaCl(2)) and sodium chloride (NaCl) on CMC adsorption was examined. The QCM-D results demonstrated that CaCl(2) (divalent cation) caused significantly greater CMC adsorption onto regenerated cellulose surfaces than NaCl (monovalent cation) at the same ionic strength. The CMC layers adsorbed onto regenerated cellulose surfaces from CaCl(2) solutions exhibited greater stability upon exposure to flowing water than layers adsorbed from NaCl solutions. Both QCM-D and SPR results showed that CMC adsorption onto regenerated cellulose surfaces from CaCl(2) solutions increased with increasing CaCl(2) concentration up to the solubility limit (10 mM). Voigt-based viscoelastic modeling of the QCM-D data indicated that the CMC layers adsorbed onto regenerated cellulose surfaces had shear viscosities of η(f) ≈ 10(-3) N·s·m(-2) and elastic shear moduli of μ(f) ≈ 10(5) N·m(-2). Furthermore, the combination of SPR spectroscopy and QCM-D showed that the CMC layers contained 90-95% water. Adsorption isotherms for CMCs in CaCl(2) solutions were also obtained from QCM-D and were fit by Freundlich isotherms. This study demonstrated that CMC adsorption from CaCl(2) solutions is useful for the modification of cellulose surfaces.     

Understanding the effects of lignosulfonate on enzymatic saccharification of pure cellulose

The effects of lignosulfonate (LS) on enzymatic saccharification of pure cellulose were studied. Four fractions of LS with different molecular weight (MW) prepared by ultrafiltration of a commercial LS were applied at different loadings to enzymatic hydrolysis of Whatman paper under different pH. Using LS fractions with low MW and high degree of sulfonation can enhance enzymatic cellulose saccharification despite LS can bind to cellulase nonproductively. The enhancing effect varies with LS properties, its loading, and hydrolysis pH. Inhibitive effect on cellulose saccharification was also observed using LS with large MW and low degree of sulfonation. The concept of “LS-cellulase aggregate stabilized and enhanced cellulase binding” was proposed to explain the observed enhancement of cellulose saccharification. The concept was demonstrated by the linear correlation between the measured amount of bound cellulase and saccharification efficiency with and without LS of different MW in a range of pH.     

Oxidation of wood cellulose using 2-azaadamantane N-oxyl (AZADO) or 1-methyl-AZADO catalyst in NaBr/NaClO system

A wood cellulose was oxidized with catalytic amounts of 2-azaadamantane N-oxyl (AZADO) or 1-methyl-AZADO, in an NaBr/NaClO system, in water at pH 10. The oxidation efficiency, carboxylate/aldehyde contents, and degree of polymerization (DP_v) of the oxidized celluloses thus obtained were evaluated in terms of the amount of AZADO or 1-methyl-AZADO catalyst added, in comparison with those prepared using the TEMPO/NaBr/NaClO system. When the AZADO/NaBr/NaClO and 1-methyl-AZADO/NaBr/NaClO oxidation systems were applied to wood cellulose using the same molar amount of TEMPO, the oxidation time needed for the preparation of oxidized celluloses with carboxylate contents of 1.2–1.3 mmol/g was reduced from ≈80 to 10–15 min. Moreover, the molar amounts of AZADO and 1-methyl-AZADO that had to be added for the preparation of oxidized celluloses with carboxylate contents of 1.2–1.3 mmol/g were reduced to 1/32 and 1/16 of the amount of TEMPO added, respectively. The DP_v values for the AZADO- and 1-methyl-AZADO-oxidized celluloses after NaBH₄ treatment were in the range of 600–800. This indicated that not only C6-carboxylate groups but also C2/C3 ketones were formed to some extent on the crystalline cellulose microfibril surfaces during the AZADO- and 1-methyl-AZADO-mediated oxidation. When the AZADO-oxidized wood cellulose, which had a carboxylate content of 1.2 mmol/g, was mechanically disintegrated in water, an almost transparent dispersion consisting of individually nano-dispersed oxidized cellulose nanofibrils was obtained, with a nanofibrillation yield of 89 %.     

Hydrolysis behavior of various crystalline celluloses treated by cellulase of Tricoderma viride

Cellobiose and glucose are valuable products that can be obtained from enzymatic hydrolysis of cellulose. This study discusses changes in the crystalline form of celluloses to enhance the production of sugars and examines the effect on structural properties during enzymatic hydrolysis. Various crystalline celluloses consisting of group I (cell I, cell III_I, cell IV_I) and group II (cell II, cell III_II, cell IV_II) of similar DPs were prepared as starting materials. The similar DP values allowed a more direct comparison of the hydrolysis yields. The outcomes were analyzed and evaluated based on the residues and supernatants obtained from the treatment. As a result: (1) action of the cellulase of Trichoderma viride decreased both DP and crystallinity, with greater changes in group II celluloses, (2) the polymorphic interconversion process that occurred for cell III_I, cell IV_I, cell III_II and cell IV_II during the treatment was independent of the enzymatic hydrolysis, thus, the hydrolysis behaviors depended on the starting material of the celluloses, and (3) higher sugar production was obtained from cell III_I and group II. Therefore, the hydrolysis behavior of the various crystalline celluloses depended on the particular polymorph of the starting material.     

Effect of Physicochemical Characteristics of Cellulosic Substrates on Enzymatic Hydrolysis by Means of a Multi-Stage Process for Cellobiose Production

The effect of two types of cellulose, microcrystalline cellulose and paper pulp, on enzymatic hydrolysis for cellobiose production was investigated. The particle size, the relative crystallinity index and the water retention value were determined for both celluloses. A previously studied multistage hydrolysis process that proved to enhance the cellobiose production was studied with both types of celluloses. The cellobiose yield exhibited a significant improvement (120% for the microcrystalline cellulose and 75% for the paper pulp) with the multistage hydrolysis process compared to continuous hydrolysis. The conversion of cellulose to cellobiose was greater for the microcrystalline cellulose than for the paper pulp. Even with high crystallinity, microcrystalline cellulose achieved the highest cellobiose yield probably due to its highest specific surface area accessible to enzymes and quantity of adsorbed protein.     

Immobilization of cellulase using polyurethane foam

Cellulase was covalently immobilized using a hydrophilic polyurethane foam (Hypol®FHP 2002). Compared to the free enzyme, immobilized cellulase showed a dramatic decrease (7.5-fold) in the Michaelis constant for carboxymethylcellulose. The immobilized enzyme also had a broader and more basic pH optimum (pH 5.5–6.0), a greater stability under heat-denaturing or liquid nitrogen-freezing conditions, and was relatively more efficient in utilizing insoluble cellulose substrates. High molecular weight compounds (Blue Dextran) could move throughout the foam matrix, indicating permeability to insoluble celluloses; activity could be further improved 2.4-fold after powdering, foams under liquid nitrogen. The improved kinetic and stability features of the immobilized cellulase combined with advantageous properties of the polyurethane foam (resistance to enzymatic degradation, plasticity of shape and size) suggest that this mechanism of cellulase immobilization has high potential for application in the industrial degradation of celluloses.     

Adsorption of pyridine onto the metal organic framework MIL-101

The adsorption of pyridine onto the metal organic framework MIL-101 was investigated by experimental and theoretical methods. The amount of pyridine adsorbed on MIL-101 was extraordinarily large at 20 °C, corresponding to about 950 mg/g of dried MIL-101 and approximately half of the voids being filled. Most of the pyridine that had filled the voids was rapidly removed by evacuation at room temperature, but some of the pyridine was so strongly adsorbed that it was retained even under evacuation at 150 °C. Although IR spectra of the adsorbed pyridine indicated the adsorption of pyridine as pyridinium ions and coordinated pyridine at low temperatures, increasing the adsorption temperature induced partial cleavage of the pyridine rings. The high stabilization energy of pyridine on the coordinative unsaturated sites (CUS) of MIL-101, obtained by theoretical calculation, -103 kJ/mol, supported the strong adsorption of pyridine on the CUS.     

13C CPMAS NMR investigations of cellulose polymorphs in different pulps

In order to obtain information about the crystallinity and polymorphs of cellulose, and the occurrence of hemicelluloses in pulp fibers, wood cellulose, bacterial cellulose, cotton linters, viscose, and celluloses in different pulps were investigated by solid state ¹³C CPMAS NMR spectroscopy. A mixed softwood kraft pulp and a dissolving-grade pulp were treated under strongly alkaline and acidic conditions and the effect on cellulose crystallinity was studied. The presence of different crystalline polymorphs of cellulose and the amounts of hemicelluloses are considered.     

Reducing end-group of cellulose as a reactive site for thermal discoloration

Thermal discoloration of cellulose (Avicel PH-101 and Whatman No. 42 filter paper) was studied in N₂ at 160-280 °C with glycerol-treated and NaBH₄-reduced samples, to understand the role of the reducing end. Thermal discoloration of glycerol-treated Avicel PH-101, in which some of the reducing ends were converted into glycosides (non-reducing ends), was suppressed compared with the original cellulose, and the level of suppression was directly related to the extent of glycosylation of the reducing ends. The stabilization efficiency of glycerol-treated Whatman No. 42 filter paper suggested that the reducing ends newly formed by reduction of the degree of polymerization (DP) (to about 200) during heat treatment contributed to the discoloration. The important role of the reducing ends in thermal discoloration was supported by the stabilization of Avicel PH-101 by reduction with NaBH₄ (giving a reducing end content that was 2% of that of the original cellulose). Thermally induced discoloration was also inhibited by heating cellulose in suspension in the polyether tetraethyleneglycol dimethylether, which has been reported to inhibit the thermal degradation of reducing sugars.     

Adsorption of four non-ionic cellulose derivatives on cellulose model surfaces

The adsorption of four commercial non-ionic cellulose derivatives onto two different model surfaces of cellulose fibres has been studied with surface plasmon reflectance. The model surfaces of cellulose were ultrathin films of either nano fibrillated cellulose or regenerated cellulose on Au(s). Partial least squares models were used in the analysis of the data and it was found that the type of cellulose model surface seems to be most important for both the total adsorption and the initial adsorption rate of the studied cellulose derivatives. It is believed that this can be explained by morphological differences between the surfaces, and it was found that the properties of the cellulose derivatives that affect the adsorption of the two types of cellulose surface differ. For adsorption onto a NFC-based model surface, the type of cellulose derivative and the polydispersity index (PDI) of the cellulose derivative seem to be the two most important variables for the observed adsorption of these cellulose derivatives. For the regenerated cellulose surface the three most important variables are the M _n of the cellulose derivatives, the DS _NMR of the methyl celluloses, and PDI of the cellulose derivatives. Thus the adsorption of cellulose derivatives on the NFC-based cellulose model surface is strongly affected by the type of substituent, while the same cannot be said for a surface regenerated from N-methylmorpholine-N-oxide. Additionally, the DS _NMR of methyl celluloses affects their adsorption differently on the investigated cellulose model surfaces.     

Sorption properties of celluloses in binary liquid mixtures

The adsorption capacity for methanol-benzene andn-propanol-water mixtures was measured on two kinds of microcrystalline celluloses and cotton linters. Excess adsorption isotherms were obtained; the free energy of displacement was calculated from the isotherms. The enthalpy of displacement for one crystalline cellulose was measured by flow calorimetry. The entropic function of displacement was derived from the enthalpy and free energy of displacement. The preferential adsorption of methanol andn-propanol was characterized by the adsorption equilibrium constant.On leave from the Department of Physical and Colloid Chemistry, Wageningen Agricultural University, The Netherlands     

Water adsorption on and desorption from crystalline copolymers of vinylidene fluoride with trifluoroethylene

Water adsorption and absorption on crystalline polyvinylidene fluoride with 30% trifluoroethylene, P(VDF-TrFE, 70:30), was examined by thermal desorption spectroscopy. Two distinctly different water adsorption sites are identified: one adsorbed species that resembles ice and another species that interacts more strongly with the polymer thin film. The existence of the latter species is consistent with X-ray diffraction studies of water absorbed into the bulk of copolymers of polyvinylidene fluoride with trifluoroethylene crystalline thin films. There are strong steric effects observed in the angle-resolved thermal desorption that may be a result of the large polymer thin film surface dipoles.     

To understand the superior hydrolytic activity after polymorphic conversion from cellulose I to II from the adsorption behaviors of enzymes

The role of the cellulose ultrastructure on the relationship between cellulase binding and activity is not clear yet. In this article, a quartz crystal microbalance with dissipation (QCM-D) was employed to monitor the interactions between a given cellulase and the cellulose substrates with varied polymorphs of pure cellulose I and II and the intermediate state (I/II). Initially, cellulose nanocrystals (CNCs) with polymorphs of cellulose I, I/II and II were prepared and spin-coated on QCM sensors. The cellulose substrates’ crystallinity degree was examined by XRD, and morphology was detected by AFM. Then, a commercial cellulase from Trichoderma reesei was used to test the adsorption and hydrolysis of cellulose substrates with polymorphs of I, I/II and II, respectively. The results revealed that in the enzyme adsorption and desorption process at a temperature of 15 °C, CNC-II had the lowest adsorption capacity with a total adsorption mass of 179 ng cm^?2 but the highest reversible binding ratio of 33.7%; for comparison, the values were 235 ng cm^?2 versus 25.6% and 207 ng cm^?2 versus 26.9% for CNC-I and -I/II, respectively. And the conformation of adlayers on CNC-I, -I/II and -II derived from the QCM data became softer and softer in turn. On the other hand, CNC-II exhibited the best enzymatic hydrolytic ability among three substrates when enzymatic hydrolysis experiments were conducted at 45 °C. The results indicated that polymorphic conversion from I to II changes the affinity between the enzyme and cellulose surface; CNC-II has the lowest affinity to the enzyme, but the softer conformation of the adsorbed enzyme layer, and the more reversible adsorption may facilitate its hydrolytic activity. This article gives a perspective from the adsorption dynamics and conformation of the adsorbed enzyme layer, helping to understand the superior hydrolytic activity of cellulose with polymorph II. Thus, there is a potential of polymorphic conversion in the reduction of enzyme dosage and cost in the enzymatic hydrolysis process.     

Effects of a non-ionic surfactant,Tween 20, on adsorption/desorption of saccharification enzymes onto/from lignocelluloses and saccharification rate

In this work, we examined the role of a non-ionic surfactant, Tween 20, on enzymatic hydrolysis of lignocelluloses. Delignified lignocelluloses (pine wood chip) were used as model substrates. Effects of Tween 20 on adsorption/desorption onto/from lignocelluloses with and without hydrolysis were evaluated respectively. Tween 20 lowered the non-biospecific adsorption of β-glucosidase and enhanced the bio-specific adsorption of cellulase. Tween 20 did not affect the liquid phase reaction (cellobiose hydrolysis). However, for the solid surface reaction (cellulose hydrolysis), cellulose conversion for 72 hrs was increased 9–21% and 1–8.5% for samples with high lignin contents (PI) and low lignin contents (PIII) by injection of Tween 20 (0.024–0.24 mM), respectively. Moreover, Tween 20 increased the cellulose conversion rate substantially. It is suggested that the increase of cellulase amount adsorbed due to the increase of effective cellulose surface by Tween 20 contribute to the enhancement of cellulose conversion.