一种新型超支化蓝光聚合物的合成

设计出一种高荧光量子效率的发光齐聚物——4,4'-二羟基苯乙烯基-4,4'-联苯, 并以此作为A2单体, 以季戊四醇的对甲基苯磺酸酯为B4单体, 通过A2+B4的路线, 合成出一种结构新颖的部分共轭型超支化发光聚合物. 该聚合物呈理想的三维结构, 分子中非共轭间隔链段的引入不仅能改善发光聚合物的溶解度和加工性, 还在一定程度上阻止了荧光基团之间的重叠, 阻止激子系间窜越等非辐射复合的发生, 减小了分子间或分子内生成激基缔合物或复合物的几率, 从而提高了量子效率.     

发蓝光聚醚醚酮材料的合成及其光电特性

通过4-羟基苯甲醛与2,6-二(4-氯甲基苯基)苯并[1-2,4-5′]二唑之间的Wittig反应,制备了具有蓝色荧光特性的小分子单体2,6-二{4-[2-(4-羟基苯基)乙烯基]苯基}苯并[1-2,4-5′]二唑,在碳酸钾的催化作用下,通过其与4,4′-二氟二苯甲酮的缩聚反应,设计并合成了以均二苯乙烯为共轭母核的可发射蓝光的聚醚醚酮材料(BOE-PEEK),并对其结构进行了表征.测定结果表明,该聚合物的平均分子量(-Mw)为1.38×10⁵,均分散系数(PDI)为4.35,玻璃化温度(T_g)为195℃,热分解温度(T_d)为440℃,BOE-PEEK在二甲基乙酰胺(DMA)溶剂中的UV-Vis吸收光谱(λ_max)为372 nm,荧光光谱(λ_max)为455nm,由导电玻璃/发光层/金属铝电极(ITO/BOE-PEEK/Al)组成的单层器件在电压15 V时,发光亮度达530 cd·cm^-2,发光效率为0.36 cd/A.     

胺烷基侧链取代三苯胺类红光聚合物的合成及性能研究

通过Suzuki偶合反应合成了一系列胺烷基侧链取代的基于三苯胺和芴的共轭聚合物聚[4-(N,N-二甲基胺丙氧基)苯-4,4′-二苯胺-9,9-二辛基芴-4,7-二噻吩-2-基-2,1,3-苯并噻二唑](PFTD), 并对其化学结构和光电性能进行了表征. 末端胺基的存在提高了此类聚合物作为发光层应用于聚合物电致发光器件的性能(采用高功函数的金属铝作为阴极时). 结构为ITO/PVK/PFTD-5(DBT摩尔分数为5%时的聚合物)/Al的器件最大电致发射峰位于647 nm, 最大外量子效率达到了1.24%.     

骨架可水解的具核超支化聚缩醛的合成与表征

通过AB2型聚合单体4-(2-羟基乙氧基)苯甲醛二甲缩醛与B2型核分子苯甲醛二甲缩醛的缩醛转移聚合反应,反应过程中不断排出低沸点的醇,合成了具核、骨架可水解的超支化聚缩醛(HBPAs).实验表明,HBPAs的分子量,多分散性和聚合度随着核比例的改变发生明显的变化.增加核比例,聚合物的分子量,多分散性和聚合度均降低.HBPAs在弱酸性条件下,骨架发生水解,生成4-(2-羟基乙氧基)-苯甲醛.研究发现,核比例对于聚合物降解速率有明显的影响,增加核比例,聚合物的降解速率加快.这表明,通过加入核分子,可以在一定程度上调控超支化聚缩醛的结构与性能.     

含手性三联苯腰接型液晶聚乙炔的合成及其“甲壳效应”

设计、合成了一种新单体,并由[Rh(nbd)Cl]2/Et3N(nbd =2,5-降冰片二烯)催化聚合反应制备了一种具有较高相对分子质量(质均相对分子质量为30300)的含手性三联苯液晶聚乙炔PAM3OCO(TPh)(OR*)2{一[(CH=C(CH2)3OCO-terphenyl(OR*)2]n—,R*=(S)-2-甲基丁基}.由于手性基团和三联苯液晶基元的引入,单体具有互变手性近晶C相,而聚合物则呈现互变的手性近晶A相液晶行为.三联苯液晶基元以重心位置连接于聚合物主链并围绕主链所产生的“甲壳效应”赋予了聚合物很高的热稳定性(356℃)、发光性能和聚集诱导增强发光特性.其薄膜状态下的发光强度明显大于其在稀溶液状态下的发光强度,且内量子效率和外量子效率分别为0.214和0.023.紫外光激发下,聚合物在液晶状态下的发光强度明显优于溶液和薄膜状态,并且发光谱带发生了红移.     

新型双8-羟基喹啉配体及其锌、铝配位聚合物的合成和性能

合成2种双8-羟基喹啉配体:3,5-二[4-(8-羟基喹啉-5-亚甲氨基)苯氧基]苯甲酸辛酯(B8HQO)和3,5-二[4-(8-羟基喹啉-5-亚甲氨基)苯氧基]苯甲酸十六酯(B8HQH),进一步与Zn(Ⅱ)、Al(Ⅲ)配位,得到4种金属配位聚合物(B8HQO-Zn、B8HQH-Zn、B8HQO-Al和B8HQH-Al)。 通过元素分析、红外光谱(FIIR)、紫外可见光谱(UV-Vis)、核磁共振氢谱(¹H NMR)、电感耦合等离子体发射光谱(ICP-OES)、热重分析(TGA)及荧光光谱等测试手段对配体及金属配位聚合物进行结构表征和性能研究。 结果表明,与配体B8HQO和B8HQH相比,4种配位聚合物的溶解性降低,但可部分溶于N,N-二甲基甲酰胺(DMF)、N,N-二甲基乙酰胺(DMAC)、二甲基亚砜(DMSO)和N-甲基吡咯烷酮(NMP)中。 锌、铝配位聚合物的5%失重温度分别在378和364 ℃附近,具有较好的热稳定性。 4种配位聚合物的DMF溶液(3×10^-5 mol/L)在478~502 nm发射绿色荧光,荧光量子效率28%~37%,固体在528~553 nm发射强绿色荧光,具有良好的发光性能。     

9位芳香基取代超支化聚芴的合成与表征

以2,7-二溴芴酮为起始原料,在芴的9位引入芳香取代基代替传统的烷基取代基,增加9位的稳定性,并用AB+AB2的方法,用新单体合成了不同支化度的超支化聚合物,新合成的超支化聚合物具有良好的热稳定性和发光稳定性.聚合物的热分解温度都在400℃以上;聚合物的薄膜在空气中于200℃加热2 h后没有出现绿光发射带,发光稳定性和烷基聚芴相比得到明显的提高.DSC结果显示,线性聚合物在170℃时有玻璃化转变,超支化聚合物在300℃以内没有明显的相转变,保持一种稳定的无定形态,更有利于提高材料的发光效率.     

超支化聚(酯-胺)分子结构及固化涂层性能研究

近年来,颜德岳等基于A2型单体二丙烯酸酯及BB2′型单体二胺化合物合成了多种端胺基超支化聚(酯-胺),并对反应机理及聚合物结构进行了系统研究[1,2],结果表明,由于B与B′活性差异,反应首先生成AB2′型和B4′型中间体,进一步聚合得到可溶性产物.我们基于A3型单体三丙烯酸酯与B2型单体二胺化合物合成了端丙烯酸酯基超支化聚(酯-胺)[3,4].在这些体系中,由于官能团反应活性高,难以控制反应程度.另外,由于超支化聚合物不能直接用作结构材料,其在涂料、粘合剂等领域的应用多基于末端官能团的固化反应[5].但通常由于官能团在分子表面密集分布,部…     

一种含三苯胺链段的PPV类交替共聚物的合成、表征及性能

合成了三苯胺二醛和1-甲氧基-4-辛氧基-2,5-二甲苯双(三苯基氯化)两种单体,通过Wittig反应制得了共轭聚合物,对共轭聚合物进行了表征和性能测试.这类共轭聚合物的氯仿溶液和膜在紫外光激发下能发出强的蓝绿光,与小分子三苯胺衍生物(TPD)相比,具有相对较高的热稳定性和良好的成膜性.电化学分析表明聚合物具有很好的空穴传输能力.同时对共轭聚合物的光致发光和电致发光性能进行了研究,结果表明,此聚合物与同类聚对亚苯基亚乙烯基(PPV)型聚合物相比具有较低的驱动电压和较高的发光亮度,是一种潜在的有机高分子电致发光材料.     

主链含有三芳基均三嗪环的可溶性双苯基芴基聚芳醚的合成与性能

以含均三嗪环结构的双氟单体2,4-二(4-氟苯基)-6-苯基-1,3,5-三嗪(BFPT)与4,4’-联苯二酚(BP)和9,9-二(4-羟基苯基)芴(BHF)为共聚单体,经溶液亲核取代逐步聚合,合成了一系列主链含三芳基均三嗪环结构和双苯基芴结构线性聚芳醚(PEPs).反应过程经优化,得到的聚合物数均分子量高达6.3×104.采用元素分析、FTIR、NMR和H-H gCOSY等对聚合物结构进行表征,并对聚合物进行溶解性、示差扫描量热(DSC)、动态力学性能(DMA)、热失重(TGA)、机械性能等测试.由于双苯基芴基团的存在,聚合物的溶解性得到明显改善.当双苯基芴结构单元含量高于20%时,聚合物可溶于N-甲基吡咯烷酮(NMP)、氯仿(CHCl3)、四氯乙烷(C2H2Cl4)、和吡啶(pyridine)等极性溶剂中,同时保持了优异的耐热性.聚合物的玻璃化转变温度Tg由DSC测得在269~307℃之间,由DMA测得在269~291℃之间,且随着主链中双苯基芴结构的增加而升高.N2气氛下,PEPs的5%热失重温度超过544℃,800℃残碳率大于48%.     

新型超支化聚芳烃的合成与性能研究

3,6-二乙炔基-9-(三苯胺基)-咔唑、4,4′-二乙炔基-4″-(咔唑基)-三苯胺双炔和1-辛炔单炔在CpCo(CO)2-hν催化的条件下合成了新型超支化聚芳烃.所得的聚合物都溶于普通溶剂(甲苯、THF、氯仿、二氯甲烷等).在光激发的条件下,聚合物在428 nm左右发射蓝光,其荧光量子效率达到62%.所有超支化聚合物都表现出优异的热稳定性,它们的起始分解温度高达484℃.     

重氮偶合反应合成超支化偶氮聚合物的光响应性能研究

利用重氮偶合反应和后重氮偶合反应制备了主链和端基含有不同假芪型偶氮苯生色团的超支化偶氮聚合物.利用氢核磁共振、紫外光谱、红外光谱等分析手段确定了合成聚合物的结构、玻璃化转变温度和光谱特性等.研究了聚合物光致二向色性的性能,此聚合物的取向有序度为0.063.用两束相干的P偏振Ar+激光对聚合物膜进行光加工,得到形状规则的正弦波形表面起伏光栅,末端偶氮苯基团的引入极大地增加了超支化偶氮聚合物的光响应速度.     

Synthesis and characterization of highly stable blue‐light‐emitting hyperbranched conjugated polymers

Polyfluorene homopolymer ( P1 ) and its carbazole derivatives ( P2 – P4 ) have been prepared with good yield by Suzuki coupling polymerization. P2 is an alternating copolymer based on fluorene and carbazole; P3 is a hyperbranched polymer with carbazole derivative as the core and polyfluorene as the long arms; P4 is a hyperbranched polymer with carbazole derivative as the core and the alternating fluorene and carbazole as the long arms. These polymers show highly thermal stability, and their structures and physical properties are studied using gel permeation chromatography, ¹H NMR, ¹³C NMR, elemental analysis, Fourier transform infrared spectroscopy, thermogravimetry, UV–vis absorption, photoluminescence, and cyclic voltammetry (CV). The influence of the incorporation of carbazole and the hyperbranched structures on the thermal, electrochemical, and electroluminescent properties has been investigated. Both carbazole addition and the hyperbranched structure increase the thermal and photoluminescent stability. The CV shows an increase of the HOMO energy levels for the derivatives, compared with polyfluorene homopolymer ( P1 ). The EL devices fabricated by these polymers exhibit pure blue‐light‐emitting with negligible low‐energy emission bands, indicating that the hyperbranched structure has a strong effect on the PLED characteristics. The results imply that incorporating carbazole into polyfluorene to form a hyperbranched structure is an efficient way to obtain highly stable blue‐light‐emitting conjugated polymers, and it is possible to adjust the property of light‐emitting polymers by the amount of carbazole derivative incorporated into the polymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 790–802, 2008     

Synthesis of novel low-viscosity liquid epoxidized aromatic hyperbranched polymers

Low-viscosity liquid epoxidized aromatic hyperbranched polymers are synthesized by the reaction between epichlorohydrin (ECH) and carboxy-end hyperbranched polymers prepared from low-cost products trimellitic anhydride (B₃ TMA) and dihydroxy alcohols (A₂). The low-viscosity property, especially the lowest viscosity of epoxidized aromatic hyperbranched polymers is only 350 cp which has not reported among epoxidized aromatic hyperbranched polymers before, make them can be used to coatings and adhesion fields without organic solvent hopefully. The properties of the epoxidized aromatic hyperbranched polymers are measured by GPC, FT-IR and viscometer.     

Surface-relief-grating formation behavior of two hyperbranched azo polymers

In this work,surface-relief-grating formation behavior was studied by using two hyperbranched azo polymers.The hyperbranched polymers containing pseudo-stilbene type azo chromophores throughout the hyperbranched structure were synthesized by step-growth polycondensation of AB₂ type monomers.The AB₂ monomer,4-（4’-（bis（2-chloroethyl）amino）-phenylazo） benzoic acid（BAA）,was prepared through azo-coupling reaction between N,N’-bis（2-chloroethyl）aniline and 4- aminobenzenic acid.The another AB₂ monomer,4-（4’-（bis（2-chloroethyl）amino）phenylazo）-3-nitro-benzoic acid（BANA）, was prepared through azo-coupling reaction between N,N-bis（2-chloroethyl）aniline and 3-nitro-4-aminobenzcnic acid.The hyperbranched polymers（PBAA and PBANA） were prepared through nucleophilic substitution reaction of BAA and BANA, respectively.The polymers synthesized were characterized by using spectroscopic methods and thermal analysis.The photoinduced dichroism and photo-induced surface-relief-grating（SRG） formation of the hyperbranched polymers were investigated upon irradiation with Ar⁺ laser at 488 nm.PBAA shows typical photoinduced dichroism SRG formation behavior.On the contrary,PBANA does not show the photoresponsive properties.The results indicate that the nitro at the ortho position of azo group of PBANA shows the effect of inhibiting the photoinduced variations.The effect can be attributed to the blockage of the trans-cis isomerization of the azobenzene moieties by the steric hindrance.     

Novel Functional Conjugative Hyperbranched Polymers with Aggregation‐Induced Emission: Synthesis Through One‐Pot “A2+B4” Polymerization and Application as Explosive Chemsensors and PLEDs

With the aim to develop new tetraphenylethylene (TPE)‐based conjugated hyperbranched polymer, TPE units, one famous aggregation‐induced emission (AIE) active group, are utilized to construct hyperbranched polymers with three other aromatic blocks, through an “A₂+B₄” approach by using one‐pot Suzuki polycondensation reaction. These three hyperbranched polymers exhibit interesting AIEE behavior and act as explosive chemsensors with high sensitivity both in the nanoparticles and solid states. This is the first report of the AIE activity of the TPE‐based conjugated hyperbranched polymers. Their corresponding PLED devices also demonstrate good performance.     

由4',4'-二羟基-2-甲酸－三苯基甲烷及其衍生物制备高碳超支化芳香聚酯

合成了一系列含羟基和乙酰氧基的超支化聚酯,将4',4'二羟基-2-甲酸－三 苯基甲烷（酚酞啉）直接缩聚和将4~＇,4~＂-二羟基-2-甲酸－三苯基甲烷进行酯 交换反应都成功得到了超支化聚酯,以PS作标准物,由GPC测得的重均分子量为 2000到8000,~13C NMR测试表明聚合物支化度略高于50%,聚酯的玻璃化转变温度 依赖于末端和侧基官能团类型,该超支化聚酯末端含有反应性官能团,具有类似线 性高分子的高的热稳定性,相比之下,由于其大分子的形状和官能团的影响,末端 为乙酰氧基的超支化聚枉费显示了优良的溶解性能,这与一般线性高分子大不相同 ,由于氢键的存在,末端为羟基的超支化聚酯的溶解性能不佳,但是酸酯显示了 优良的溶解性能,这与一般线性高分子大不相同,由于氢键的存在,末端为羟基的 超支化聚枉费的溶解性能不佳,但是酸化可破坏氢键网络,得到的超支化聚酯可深 于一般有机溶剂。     

Control of polymer topology through transition-metal catalysis: synthesis of hyperbranched polymers by cobalt-mediated free radical polymerization

A novel approach was demonstrated for the synthesis of hyperbranched polymers by direct free radical polymerization of divinyl monomers controlled by a cobalt chain transfer catalyst (1). By controlling the competition between propagation and chain transfer with 1, the free radical polymerization of ethylene glycol dimethacrylate (3) afforded soluble hyperbranched polymers in one pot. The structure of the hyperbranched polymers was confirmed by (1)H and (13)C NMR. The molecular weight and intrinsic viscosity of the hyperbranched polymers were measured by matrix-assisted laser desorption ionization (MALDI) mass spectrometry and size exclusion chromatography (SEC) equipped with triple detectors. The intrinsic viscosities of the hyperbranched polymers are much lower than those of their linear analogues and do not show molecular weight dependence. The unique structure and properties of these hyperbranched polymers combined with the commercial availability of many divinyl monomers and the robustness of free radical polymerization make this new approach attractive for the preparation of new functional materials.     

Hyperbranched copolymers made from A2, B2 and type monomers (iv)--Copolymerization of divinyl sulfone with 4, 4′-trimethylenedipiperidine and N-ethylethylenediamine

The new approach for synthesis of hyperbranched polymers from commercially available A2 and type monomers was extended to synthesize hyperbranched copolymers. In this work, hyperbranched copoly(sulfone-amine) was prepared by copolymerization of divinyl sulfone (A2) with 4,4′-trimethylenedipiperidine (B2) and N-ethylethylenediamine ( ). During the reaction, secon-dary-amino groups of B2 and monomers react rapidly with vinyl groups of A2 monomers within 35 s, generating a type of intermediate containing one vinyl group and two reactive hydrogen atoms. Now the intermediates can be regarded as a new type monomer, which further polymerizes to form hyperbranched copoly(sulfone-amine). The polymerization mechanism was investigated with FTIR and LC-MSD. The degree of branching (DB) of hyperbranched copolymers increased with decreasing the ratio of 4, 4′-trimethylenedipiperidine to N-ethylethyl- enediamine, so DB can be controlled. When the initial mole ratio of B2 to was equal to or higher than four, r≥4, resulted copolymers were semi-crystalline, while copolymers with r＜3 were amorphous.     

可控降解超支化聚碳硅氮烷的合成与表征

通过锂化四甲基二乙烯基二硅氮烷分别与甲基氢二氯硅烷和二甲基氢氯硅烷的亲核取代反应合成了AB4和AB2型单体AB4M和AB2M,两种单体通过Karstedt催化剂催化的硅氢加成反应分别生成聚碳硅氮烷PAB4M和PAB2M.单体和聚合物的结构通过FT-IR、1H-NMR、13C-NMR、29Si-NMR和体积排除色谱-多角度激光光散射联用(SEC-MALLS)技术进行了表征,结果表明,单体的结构与设计结构相符合;单体聚合时主要以α-硅氢加成方式为主;聚合物具有超支化结构并由N(Si—C)3链节和大量端基双键组成.PAB4M和PAB2M的重均分子量分别为7800和5860g/mol,分子量分布系数分别为2·54和2·31·对PAB4M稳定性的初步研究表明,该聚合物对氯硅烷和在中性条件下对水稳定,但在HCl水溶液中可以降解,且通过控制HCl浓度可以调节其降解速度,从而实现对其控制降解.