Bioaccumulation of vanadium in the epiphytic lichen Parmelia caperata from Liguria (north-west Italy)

The concentration of vanadium was measured in 35 samples of the epiphytic lichen Parmelia caperata collected along the coast of the Ligurian Sea (Italy), in order to detect the possible bioaccumulation of vanadium due to a huge crude oil burning occurred in that area in 1991. The cartographic elaboration of data shows a pattern of distribution of vanadium concentrations according to different degrees of deviation from background condition, showing that 8 years later memory of the accident is still detectable in foliose lichen thalli.     

Direct Determination of Lead in Smoke from Burned Crude Oil by Impaction Graphite Furnace Atomic Absorption Spectrometry

A unique impaction graphite furnace atomic absorption spectrometric system was used to investigate the concentration of lead in smoke from burning crude oil. The lead concentration in 3 ml of crude oil decreased sharply in the inital burning stages, which was attributed to the release of the more volatile lead compounds, and then steadily decreased over the length of the burn. Lead signals from the smoke of the burned oil confirmed that the lead was being released into the smoke and ultimately into the atmosphere.     

Chemical demulsification of natural petroleum emulsions of Assam (India)

About one third petroleum production of every oil field is in the form of water in oil emulsions which are normally stabilized by the nickel and vanadium porphyrins from asphaltene portion of crude. The petroleum emulsions of Assam oil fields which have been taken for the present work, are stabilized by the organometallic compounds of iron and high molecular weight compounds from asphaltenes. There is least possibility of any change on these natural petroleum emulsions. The Assam oil field emulsions have been tried to be broken by polyoxyethylene alkyl phenols, their sulphonates and sodium sulphonates in different combinations. The nonyl and octyl phenols with 30 and 40 molecules of ethylene oxide are found most suitable demulsifiers for Lakwa, Rudrasagar and Galeki (Assam) oil fields emulsions. The effect of polyoxyethylene alkyl phenols followed by the treatment of polyvalent cations had been studied for the first time in the field of demulsification of natural petroleum emulsions. This new combination has shown the best results as this broke even the most stable petroleum emulsions which could not be broken by polyoxyethylene alkyl phenols alone. In the present paper a simple method for calculating the chemical demulsification efficiency and a factor H/S paralleled to HLB & H/L for evaluating the emulsification property of surface active agents, have been introduced.     

Magnetic ion imprinted polymer nanoparticles for the preconcentration of vanadium(IV) ions

An ion imprinted polymer coated onto magnetite (Fe₃O₄) nanoparticles is shown to be a useful magnetic sorbent for the fairly selective preconcentration of vanadium. The sorbent was prepared by radical copolymerization of 3-(triethoxysilyl)propyl methacrylate (the monomer), ethylene glycol dimethacrylate (the cross-linker), and the vanadium(IV) complex of 1-(2-pyridylazo-2-naphthol) in the presence of magnetite nanoparticles. The material was characterized by IR spectroscopy, scanning electron microscopy, and thermal analysis. The vanadium(IV) ions were removed from the imprint by a solution containing thiourea and HCl, and the eluent was submitted to AAS. The analytical efficiency and relative standard deviation are 99.4 and ±2.3 %, respectively, under optimum conditions, and the limit of detection is 20 ng mL^?1. The method was successfully applied to the preconcentration and determination of vanadium(IV) ions in crude oil. Figure

An ion imprinted polymer is coated on to magnetite nanoparticles as a useful magnetic sorbent for the fairly selective preconcentration of vanadium which can be used for vanadium determination in crude oil.     

Magnetic ion imprinted polymer nanoparticles for the preconcentration of vanadium(IV) ions

An ion imprinted polymer coated onto magnetite (Fe₃O₄) nanoparticles is shown to be a useful magnetic sorbent for the fairly selective preconcentration of vanadium. The sorbent was prepared by radical copolymerization of 3-(triethoxysilyl)propyl methacrylate (the monomer), ethylene glycol dimethacrylate (the cross-linker), and the vanadium(IV) complex of 1-(2-pyridylazo-2-naphthol) in the presence of magnetite nanoparticles. The material was characterized by IR spectroscopy, scanning electron microscopy, and thermal analysis. The vanadium(IV) ions were removed from the imprint by a solution containing thiourea and HCl, and the eluent was submitted to AAS. The analytical efficiency and relative standard deviation are 99.4 and ±2.3 %, respectively, under optimum conditions, and the limit of detection is 20 ng mL⁻¹. The method was successfully applied to the preconcentration and determination of vanadium(IV) ions in crude oil.

An ion imprinted polymer is coated on to magnetite nanoparticles as a useful magnetic sorbent for the fairly selective preconcentration of vanadium which can be used for vanadium determination in crude oil.

     

Determination of cadmium, lead, and nickel by simultaneous multielement flame atomic absorption spectrometry in burned and unburned Venezuelan crude oil

This work describes the use of simultaneous multielement flame atomic absorption spectrometry for the determination of cadmium, lead, and nickel in burned and unburned Venezuelan crude oil (5 ml volumes) in controlled laboratory experiments. The simultaneous detection limits were 0.010 mug ml(-1) (Cd), 0.04 mug ml(-1) (Pb), and 0.40 mug ml(-1) (Ni) with precision's of these elements at concentrations of 10x above these detections limits, and in the crude oil, of 1-2%. Loss of elemental concentrations in the crude oil in a 3-5 ml volume when burned were 4% (Cd), 50% (Pb), and 22% (Ni). These results suggest that the form of the elements and the temperature attained in the burning crude oil effect the removal of the elements. The type of surface affected the volume of oil removed. Soil gave a 15% and a smooth surface almost 50% volume reduction.     

Selective detection of volatile nickel,vanadium, and iron porphyrins in crude oils by gas chromatography-atomic emission spectroscopy

This report describes the selective detection of volatile nickel, vanadium, and iron metalloporphyrins in crude oil samples. An atomic emission detector (AED) was used for simultaneous detection of these metals using the Ni 301.2 nm, V 292.4 nm, and Fe 302.1 nm emission lines. Detection limits for these metals range from 0.05 to 5 pg/sec. The presence of volatile forms of these metals in several crude oil samples has been confirmed.     

Molecular exclusion chromatography in studies of the vanadium- and nickel-containing species in residual oil

A residual oil sample prepared from a crude oil is chromatographed on a column having a molecular-weight exclusion limit at about 5000. Three-dimensional chromatograms (absorbance/wavelength/time) are recorded with a u.v.-visible rapid-scanning detector. The elution profiles of vanadium- or nickel-containing species are obtained by applying atomic absorption spectrophotometry to fractions of the column effluents. Both vanadium- and nickel-containing species are detected over the whole molecular-weight range available with the column. The elution profiles of vanadium and nickel differ; the major elution peak for vanadium appears at a slightly lower molecular-weight region of the chromatogram than that for nickel. By reference to the real-time recorded absorption spectra of the effluents, it is suggested that at least some of the metals are present as metalloporphyrins.     

The determination of lead, nickel and vanadium in Saudi Arabian crude oil by sequential injection analysis/inductively-coupled plasma mass spectrometry

The coupling of sequential injection with inductively-coupled plasma mass spectrometry as an analytical tool for trace element detection is described. The technique is applied for determining the concentrations of lead, nickel and vanadium at part per billion levels in sample solutions of Saudi arabian crude oils. A microemulsion crude oil sampling procedure and a standard addition method using oil-soluble organo metallic salts of trace elements were used. A reference oil sample (NBS 1634b) was analyzed to obtain the accuracy and precision of the method. Results showed percentage recovery values of 98.2%, 95.7% and 101.4% and standard deviations of 2.9%, 1.5% and 2.0% for lead, nickel and vanadium respectively. The method is sensitive, requires only small sample volumes and is quick.     

Feasibility of using solid sampling graphite furnace atomic absorption spectrometry for speciation analysis of volatile and non-volatile compounds of nickel and vanadium in crude oil

A method for the direct determination of volatile and non-volatile nickel and vanadium compounds in crude oil without previous treatment using direct solid sampling graphite furnace atomic absorption spectrometry is proposed. The crude oil samples were weighed directly onto solid sampling platforms using a microbalance and introduced into a transversely heated solid sampling graphite tube. In previous work of our group losses of volatile nickel and vanadium compounds have been detected, whereas other nickel and vanadium compounds were thermally stable up to 1300 and 1600 °C, respectively. In order to avoid this problem different chemical modifiers (conventional and permanent) have been investigated. With 400 μg of iridium as permanent modifier, the signal started to drop already after two atomization cycles, possibly because of an interaction of nickel (which is a catalyst poison) with iridium. Twenty micrograms of palladium applied in each determination was found to be optimum for both elements. The palladium was deposited on the platform and submitted to a drying step at 150 °C for 75 s. After that the sample was added onto the platform and submitted to the furnace program. The influence of sample mass on the linearity of the response and on potential measurement errors was also investigated using four samples with different nickel content. For the sample with the lowest nickel concentration the relationship between mass and integrated absorbance was found to be non-linear when a high sample mass was introduced. It was suspected that the modifier had not covered the entire platform surface, which resulted in analyte losses. This problem could be avoided by using 40 μL of 0.5 g L⁻¹ Pd with 0.05% Triton X-100. Calibration curves were established with and without modifier, with aqueous standards, oil-in-water emulsions and the certified reference material NIST SRM 1634c (trace metals in residual fuel oil). The sensitivity for aqueous standards and emulsions was close to that for SRM 1634c, making possible the use of aqueous standards for calibration. The limits of detection and quantification obtained for nickel and vanadium under this condition were found to be 0.02 and 0.06 μg g⁻¹, respectively, for both elements, based on 10 mg of sample. Nickel and vanadium were determined in the samples with (total Ni and V) and without the use of Pd (thermally stable compounds), and the concentration of volatile compounds was calculated by difference. The results were compared with those obtained by high-resolution continuum source graphite furnace atomic absorption spectrometry by emulsion technique; no significant differences were found for total Ni and V at the 95% confidence level according to a Student's t-test.     

Determination of volatile and non-volatile nickel and vanadium compounds in crude oil using electrothermal atomic absorption spectrometry after oil fractionation into saturates, aromatics, resins and asphaltenes

In recent work, it has been shown that electrothermal atomic absorption spectrometry (ET AAS) can be used to differentiate between volatile and non-volatile nickel and vanadium compounds in crude oil. In the present work, the distribution of these two groups of compounds over different fractions of crude oil was investigated. For this purpose two crude oil samples were separated in two steps: firstly, the asphaltenes were precipitated with n-heptane, and secondly, the maltenes were loaded on a silica column and eluted with solvents of increasing polarity. The four fractions of maltenes eluted from silica column were: F1, saturated and light aromatics; F2, polyaromatics; F3, resins; and F4, polar compounds. Fractions F1 and F2 were further investigated using gas chromatography, and all fractions were characterized by CHN analysis, confirming the increase of aromatics in the fractions 2, 3, 4 and asphaltenes. For the determination of Ni and V by ET AAS, oil-in-water emulsions were prepared. The speciation analysis was carried out measuring without chemical modifier (stable compounds) and with 20 μg palladium (total Ni and V) and the volatile fraction was calculated by difference. The limits of detection were 0.02 μg g⁻¹ and 0.06 μg g⁻¹, for Ni and V, respectively, based on an emulsion of 2 g of oil in 10 mL. The volatile species of Ni and V were associated with fractions F3 and F4, while only thermally stable Ni and V was precipitated in part together with the asphaltenes.     

Comparative study of biosurfactant produced by microorganisms isolated from formation water of petroleum reservoir

Biosurfactant produced by Pseudomonas aeruginosa, Bacillus subtilis and Rhodococcus erythropolis that isolated from the formation water of Chinese petroleum reservoir has been compared in surface abilities and oil recovery. Maximum biosurfactant production reached to about 2.66 g/l and the surface tension of liquid decreased from 71.2 to 22.56 mN/m using P. aeruginosa. Three strains exhibited a good ability to emulsify the crude oil, and biosurfactant of P. aeruginosa attained an emulsion index of 80% for crude oil which was greater than other strains. Stability studies were carried out under the extreme environmental conditions, such as high temperature, pH, salinity and metal ions. Results showed an excellent resistance of all biosurfactants to retain their surface-active properties at extreme conditions. It was found that the biosurfactants from three isolated bacteria showed a good stability above pH of 5, but at lower pH (from 1 to 5) they will harmfully be affected. They were able to support the condition up to 20 g/l salinity. P. aeruginosa biosurfactant was even stable at the higher salinity. Regarding temperature, all produced biosurfactants demonstrated a good stability in the temperature up to 120 °C. But stability of three biosurfactants was affected by monovalent and trivalent ions. Oil recovery experiments in physical simulation showed 7.2-14.3% recovery of residual oil after water flooding when the biosurfactant of three strains was added. These results suggest that biosurfactants of these indigenous isolated strains are appropriate candidates for enhanced oil recovery with a preference to biosurfactant of P. aeruginosa.     

Direct chlorine determination in crude oils by energy dispersive X-ray fluorescence spectrometry: An improved method based on a proper strategy for sample homogenization and calibration with inorganic standards

Official guidelines to perform chlorine determination in crude oil are (i) American Society for Testing and Materials (ASTM) D6470, which is based on the extraction of water from the oil and subsequent determination of the chloride by potentiometry, (ii) ASTM D3230, that measures the conductivity of a solution of crude oil in a mixture of organic solvents and (iii) US Environmental Protection Agency (EPA) 9075 that uses energy dispersive X-ray fluorescence spectrometry to quantify chlorine and it is applicable for the range from 200 μg g^− 1 to percent levels of the analyte. The goal of this work is to propose method to quantify lower amounts of chlorine in crude oil using energy dispersive X-ray fluorescence spectrometry using a simple calibration strategy. Sample homogenization procedure was carefully studied in order to enable accurate results. The calibration curve was made with standards prepared by diluting aqueous NaCl standard in glycerin. The method presented a linear response that covers the range from 8 to at least 100 μg g^− 1 of chlorine. Chlorine in crude oil samples from Campos Basin - Brazil were quantified by the proposed method and by potentiometry after extraction of chlorine from the oil. Results achieved using both methods were statistically the same at 95% confidence level.     

Counter-current chromatography for oil analysis: Retention features and kinetic effects

Application of counter-current chromatography (CCC) for oil analysis has been suggested for the first time. CCC looks very promising as a tool for pre-concentration and isolation of trace elements from oil. Features of stationary phase retention of two-phase liquid systems (oil or oil products–aqueous nitric acid solutions) in CCC have been investigated. The influence of physicochemical properties of crude oil and oil products used as a mobile phase on the volume of stationary phase (acidic aqueous solutions) retained in CCC was studied. Chromatographic behavior of several oil samples was studied. It has been shown that physicochemical properties of test oil influence its chromatographic behavior. Optimal values of density and viscosity (ρ < 0.85 g/cm³, n < 7 cSt) of crude oil and oil products that could be analyzed using CCC were estimated. The influence of the column rotational speed and flow rate of mobile phase on the stationary phase retention was also investigated. It is known that kinetic aspects (mass transfer of elements between phases) can play a very important role in selecting an optimal composition of stationary phase for the pre-concentration of elements from oil. The influence of nitric acid concentration in the stationary phase on mass transfer was studied. Kinetic characteristic for trace element recovery has been investigated for the optimization of pre-concentration conditions of trace elements from crude oil and oil products. The extraction recoveries of Zn, Mn, Fe, Ni, V, Cu, Cd, Pb and Ba by CCC in dynamic mode are in the range of 75–95% while they are lower than 35% under batch conditions.     

Spectroscopic and Chromatographic Identification of Hydrocarbon Group Types in Pakistani Crude Oils

Two crude oil samples collected from Paniro and Tangri (Sindh) southern Pakistan. The distillate fractions of both crude oil samples were analysed by U.V‐visible spectrophotometer and column chromatography for hydrocarbon group types. It was found from the physico‐chemical study of these crude oils that Tangri crude oil contains mostly paraffinic contents while Paniro crude oil samples are rich in aromatics. It was concluded from all the experiments that Tangri crude oil is paraffinic in nature; while Paniro crude oil is naphthenic in nature, further it was observed that Tangri crude oil processing would be environmentally friendly compared to Paniro crude oil, because Paniro crude contains a high amount of polyaromatics.     

Investigation of Biosurfactant-Producing Indigenous Microorganisms that Enhance Residue Oil Recovery in an Oil Reservoir After Polymer Flooding

Three biosurfactant-producing indigenous microorganisms (XDS1, XDS2, XDS3) were isolated from a petroleum reservoir in the Daqing Oilfield (China) after polymer flooding. Their metabolic, biochemical, and oil-degradation characteristics, as well as their oil displacement in the core were studied. These indigenous microorganisms were identified as short rod bacillus bacteria with white color, round shape, a protruding structure, and a rough surface. Strains have peritrichous flagella, are able to produce endospores, are sporangia, and are clearly swollen and terminal. Bacterial cultures show that the oil-spreading values of the fermentation fluid containing all three strains are more than 4.5 cm (diameter) with an approximate 25 mN/m surface tension. The hydrocarbon degradation rates of each of the three strains exceeded 50%, with the highest achieving 84%. Several oil recovery agents were produced following degradation. At the same time, the heavy components of crude oil were degraded into light components, and their flow characteristics were also improved. The surface tension and viscosity of the crude oil decreased after being treated by the three strains of microorganisms. The core-flooding tests showed that the incremental oil recoveries were 4.89–6.96%. Thus, XDS123 treatment may represent a viable method for microbial-enhanced oil recovery.     

Removal of oil spills by novel amphiphilic Chitosan-g-Octanal Schiff base polymer developed by click grafting technique

Novel Chitosan-g-Octanal Schiff base amphiphilic polymer has been developed by click grafting technique and evaluated successfully in removing different types of oils spills. The chemical structure and the morphological changes of the developed Chitosan-g-Octanal Schiff base amphiphilic polymer have been followed using FT-IR spectroscopy and SEM. The amphiphilic character of the developed Chitosan-g-Octanal Schiff base polymer has been controlled through variations of the Octanal grafting percentages from 38% to 82%. Dramatic changes of the Chitosan-g-Octanal Schiff base polymer solubility have been founded. The ion exchange capacity and water uptake have been affected in the same manner. The oils adsorption capacity was founded in direct relation to the Octanal grafting percentages and followed the order: mineral < kerosene < diesel < light crude oil (LCO) < heavy crude oil (HCO). Operational conditions such as oil amount, adsorption time, adsorbent dose, and agitation speed have been studied. The oil adsorption capacity of the Chitosan-g-Octanal Schiff base polymer for light and heavy crude oil has been increased by 167% and 110% over Chitosan ones. Finally, the removal process is optimized using response surface methodology (RSM).     

The development of a method for the qualitative and quantitative determination of petroleum hydrocarbon components using thin-layer chromatography with flame ionization detection

An analytical scheme to determine groups of petroleum hydrocarbon compounds in crude oil was developed and used for the qualitative and quantitative characterization of crude oil samples from the Shengli oilfield, the second largest oilfield in China. Crude oil samples were fractionated and analyzed by thin-layer chromatography with flame ionization detection (TLC-FID). Relative standard deviation (RSD) values for retention time, peak height and half peak width were less than 5.2% for all classes of compounds, based on nine independent replicates. The crude oil light fraction was further analyzed by GC–MS and the majority of identified compounds were methyl- or hydro-derivatives of long-chain hydrocarbons and aromatic compounds. The external standard method used in the present study can lower detection limits of petroleum hydrocarbon compound classes to 20.0 mg L⁻¹, and the crude oil concentration in the range of 30 and 35,000 mg L⁻¹ has a high linear correlation (r² > 0.97, P < 0.05) with peak area. A comparison between elution chromatography (EC) and TLC-FID regarding the recovery of petroleum hydrocarbon compounds was carried out with aged crude oil contaminated soils of 50, 80, 200 and 300 mg g⁻¹. The tested TLC-FID method showed a 10% higher recovery for total extractable materials than the reference EC method. The calibration factor was fraction-dependent and varied with the recovery rate of TLC/EC. Regarding the tested extraction procedures, accelerated solvent extraction (ASE) had a higher extraction efficiency for crude oil contaminated soils than Soxhlet and ultrasonic extractions.     

Multi-element analysis of Ghanaian crude oils by instrumental neutron activation analysis

Instrumental neutron activation analysis based on thermal neutrons from the Ghana Research Reactor-1 facility was utilized to analyze 18 trace elements namely Al, As, Br, Ca, Cd, Cl, Co, Cu, Fe, K, Mg, Mn, Na, Ni, S, Si, V, and Zn in two different crude oil samples from the Saltpond and Jubilee field in the Saltpond, Central region and Cape Three Points, Western region of Ghana, respectively. The sulfur concentration for both samples were low and within globally accepted range of 0.1–0.5%wt for sweet crude oil. The results of the elemental analysis showed that the two samples are relatively low in trace element concentrations compared to crude oils of other countries. Higher Fe concentration in the Jubilee crude oil indicates younger oil. The V/Ni ratios obtained for crude oils from both locations imply a possible marine organic origin and also suggest the Saltpond crude oil is more matured than the Jubilee crude oil.     

Experimental Investigation of the Effects of Different Parameters on the Rate of Asphaltene Deposition in Laminar Flow and Its Prediction Using Heat Transfer Approach

In this study, asphaltene deposition from crude oil on the pipe surface has been studied experimentally using a novel designed test loop. Washing technique is used to quantitatively measure the rate of asphaltene deposition during laminar flow in the steel pipe. The effects of oil velocity, asphaltene content, and surface temperature on the thickness of asphaltene deposition are investigated. The results show that the asphaltene deposition rate increases with increasing surface temperature, results in asphaltene content reduction of the flowing crude oil. As the oil velocity increases, less deposition was noticed on the surface of the pipe. Besides, thermal approach was applied to the experimental procedure which shows good agreements between the predicted thickness and the measured value from the test loop.