污染物甲胺为电子给体可见光下Pt/ZnIn2S4光催化制氢

用水热法制备了ZnIn2S4固溶体,并通过XRD和UV-vis漫反射光谱进行了表征.研究了一甲胺、二甲胺和三甲胺为给电子体,在Pt/ZnIn2S4上的可见光光催化制氢及自身的降解反应.3种甲胺都能显著提高光催化分解水制氢活性,同时自身得到很好的降解.电子给体的放氢活性顺序为:TMADMAMMA.通过红外衰减全反射(ATR-IR)法检测电子给体在ZnIn2S4表面的吸附行为,吸附强度大小依次为MMADMATMA.光催化活性与分子结构和在催化剂表面的吸附行为有关.3种污染物浓度对放氢活性的影响都符合Langmuir-Hinshelwood动力学模型.讨论了可能的化学反应机理.     

硫比例对Zn0.8Cd0.2S-En杂化固溶体光催化制氢性能的影响

采用溶剂热制备了具有不同厚度和大小的Zn0.8Cd0.2S-乙二胺杂化纳米片固溶体,系统地考察了制备过程中S/(Zn+Cd)摩尔比对所制备的光催化材料的组成与结构、光电性质以及亲水性能的影响。HR-TEM照片表明,随着制备体系中硫脲含量的增加,固溶体纳米片表面逐渐平整;荧光发射光谱结果表明,合适的S/(Zn+ Cd)摩尔比可以提高光催化材料光生电子和空穴的分离效率;光催化性能评价表明,制备过程中的S/(Zn+ Cd)原子比对其制氢活性有明显影响,在可见光照射下,S/(Zn+Cd)为4.75时,合成的Zn0.8Cd0.2S-En样品表现出最高的氢气产率,其可达到12100 μmol·h-1·g-1,分别是S/(Zn+Cd)为1.2和6.5时合成的Zn0.8Cd0.2S-En样品产氢量的2.2倍和1.7倍。光催化活性的提高与样品较少的表面缺陷、合适的形貌以及高光生电子和空穴分离效率有关。     

Z'(ohm)

C–S键的构建在化学中具有非常重要的意义.利用硫醇和烯烃/炔烃的硫氢化反应来构建C-S键是一种绿色、可持续和低成本的方法.本文以ZnCl2, InCl3,硫代乙酰胺为前驱体,在微量IrCl3存在条件下,通过一步溶剂热法制备得到了含有不同Ir摩尔比(0.5 mol%, 1 mol%和2 mol%)的Ir2S3/ZnIn2S4纳米复合材料,并考察了它在可见光下诱导烯烃/炔烃的硫氢化反应中的催化性能.以苄基硫醇和苯乙炔的硫氢化反应为模型反应,发现在ZnIn2S4中引入微量的Ir2S3可明显提升其性能,其中以0.5mol%Ir2S3/ZnIn2S4为催化剂时反应性能最佳;反应15 h后苄基硫醇的转化率为97%,苄基苯乙烯基硫醚的产率为95%,明显高于以未修饰的ZnIn2S4为催化剂时的转化率和产率.在反应中加入自由基捕获剂TEMPO之后可淬灭该反应,表明与未修饰的ZnIn2S4相同,以Ir2S3/ZnIn2S4复合材料催化的硫氢化反应同样是由硫醇自由基诱发的反应.这种微量Ir2S3对ZnIn2S4上光诱导硫氢化反应的提升作用在所考察的多个系列底物的反应中都有不同程度的体现,尤其对于一些空间体积较大的底物,其提升作用尤为明显,表明微量Ir2S3的存在对ZnIn2S4上光诱导硫醇和烯烃/炔烃硫氢化反应的提升作用具有普适性.通过研究负载不同助催化剂(MoS2, NiS和Pd)的ZnIn2S4纳米复合材料在烯烃/炔烃硫氢化反应中的性能及其电化学交流阻抗,我们发现, Ir2S3的存在可促进ZnIn2S4上光生电子空穴的分离,从而有利于巯基自由基的生成,同时还抑制了副物氢气的产生,因此,烯烃/炔烃的硫氢化反应性能显著提高.该文提出了一种在可见光下利用半导体光催化来构建C-S键的绿色途径,对于理解和设计新的光催化有机合成反应体系具有一定的指导意义.     

石墨烯助剂与Ni(Ⅱ)活性位点协同增强TiO_2制氢性能

采用水热法和低温浸渍法制备了电子助剂还原石墨烯(rGO)和界面活性位点Ni(Ⅱ)共修饰的高效TiO_2光催化剂(简称Ni(Ⅱ)/TiO_2-rGO)。制氢性能测试结果表明:相比于TiO_2和单独还原石墨烯复合的TiO_2,经还原石墨烯与Ni(Ⅱ)协同修饰后的TiO_2表现出更高的光催化制氢性能。其中,Ni(Ⅱ)/TiO_2-rGO(0.1 mol·L-1)具有最高制氢性能,制氢速率达到77.0μmol·h-1,分别是TiO_2(16.4μmol·h-1)和TiO_2-rGO(28.0μmol·h-1)的4.70倍和2.75倍。还原石墨烯助剂与Ni(Ⅱ)活性位点协同增强制氢性能的原理是:还原石墨烯作为电子助剂可以快速捕获和传输电子,Ni(Ⅱ)作为界面活性位点可以从溶液中捕获H+,提高界面反应速率,2种助剂协同作用加快了TiO_2上的光生电子-空穴对的有效分离。     

水热法制备NiS/Cd1-xZnxS及其高效光催化产氢性能

利用水热法制备 NiS 负载的 Cd1-xZnxS 光催化剂.结果表明：在0.35 mol?L-1 Na2SO3和0.25 mol?L-1 Na2S牺牲剂下,0.5%(摩尔分数, y) NiS/Cd0.3Zn0.7S (1840μmol?h-1)获得最好活性,是Cd0.3Zn0.7S (884μmol?h-1)的2.1倍,高于0.5%(质量分数, w) Pt (1390μmol?h-1)的产氢活性.测得其在λ=420 nm附近的表观量子效率为36.8%. X射线衍射(XRD)、紫外-可见漫反射光谱(UV-Vis DRS)、透射电子显微镜(TEM)以及X射线光电子能谱(XPS)的表征结果表明, NiS作为产氢活性位,转移光生电子,因此提高了光催化产氢活性.     

一锅法制备1T/2H-WS2/WO3异质结用于紫外可见光催化的CO2还原

采用一锅水热法制备了1T/2H-WS2/WO3异质结，并利用XRD、SEM、XPS等对所制备的光催化材料进行了系统微结构表征。研究发现该异质结催化剂可以水蒸汽作为电子供体，利用可见光催化还原CO2，以3.87 μmol g-1 h-1的速率高选择性的生成唯一产物CO。在紫外-可见光辐照下，表现出更优异的催化活性（34.39 μ mol g-1 h-1）。经4次循环实验，仍然表现出稳定的光催化二氧化碳还原效率，证明其具有优异的稳定性。     

卟啉修饰g-C3N4提高光催化产氢活性研究

半导体光催化制氢是一种可实现持续制备和储存氢气的绿色技术.石墨相氮化碳(g-C3N4)是研究广泛的光催化剂,但其仍存在光利用率低、光生电子和空穴易复合等问题,制约着光催化产氢的性能.利用给电子卟啉修饰g-C3N4,构建了四(4-羧基)苯基卟啉(TCPP)以共价/非共价方式修饰g-C3N4的催化剂.卟啉共价修饰g-C3N4(gC3N4-TCPP0.1)及非共价复合结构(TCPP0.1/g-C3N4)光催化产氢速率分别为6 997和5 399μmol·g-1·h-1,较g-C3N4分别提高了53%和18%. TCPPx/g-C3N4异质结加强了界面接触,促进了电荷转移,增强了可见光吸收能力,进而提高了光催化制氢性能. g-C3N4-TCPPx中, TCPP的接枝拓展了共轭结构,优化了电子结构,增大了分子偶极,促进了电荷分离,共价桥键为电荷传输提供了通道.     

二维/二维S-型Bi3NbO7/g-C3N4异质结光催化剂驱动选择性CO2还原制CH4

人工光合作用可直接将二氧化碳转化为一系列碳氢化合物,实现大气中的碳循环,被视为一种既能解决能源短缺又能减少温室气体,进而改善人类生存环境的新型绿色技术.光催化二氧化碳还原体系需要合适的耦合氧化还原反应,以及对外界光源的有效利用以产生足够电子参与反应,因此构建高催化活性和高选择性的催化体系仍然面临着巨大挑战.此外,二维纳米结构(2D)由于具有比表面积大、离子的迁移路径短以及独特的平层电子转移轨道等特性,被证实有利于光催化还原CO₂过程.其中,Bi₃NbO₇特殊的片层结构和合适的能带位置,使其在光催化还原CO₂反应中表现出良好的催化性能.然而,Bi₃NbO₇的光生载流子易复合及反应中光腐蚀严重等缺陷导致其光利用率较低,限制了其实际应用.因此,构建S-型异质结是提高复合材料光催化活性的一种有前途的策略.S-型异质结不仅能有效地分离光生电子和空穴,而且这一电子转移过程赋予了复合物最大的氧化还原能力.同时,S-型光催化体系不仅拥有同样的强氧化和强还原能力,还可显著抑制副反应的发生及副产物的产生,有利于CO₂还原反应的高选择性进行.本文利用简易的溶剂热法制备了一系列S-型Bi₃NbO₇/g-C₃N₄(BNO/UCN)异质结光催化剂,与其纯组分催化剂相比,表现出优异的光催化还原CO₂活性,g-C₃N₄含量为80wt%的BNO/UCN-3光催化剂催化CO₂生成CH₄产率为37.59μmol·g^-1h^-1,是g-C₃N₄的15倍,CH₄选择性为90%;且循环反应10次后仍保持较高的活性及CH4选择性.光催化活性及选择性的显著增强是由于二维分布的纳米结构和S-型电荷转移路径.在可见光照射下,界面内建电场、带边缘弯曲和库仑相互作用协同促进了复合物相对无用的电子和空穴的复合.因此,剩余的电子和空穴具有较高的还原性和氧化性,使复合材料具有较高的氧化还原能力.自由基捕获实验、电子顺磁共振实验和原位X射线光电子能谱实验结果表明,光催化剂中的电子迁移遵循S-型异质结机理.综上,本文不仅为新型S-型异质结CO₂还原光催化剂的设计和制备提供了新方法,而且为未来解决能源短缺及实现碳中和目标提供一定的实验及理论依据.     

多相光催化甲苯选择性氧化研究进展

苯甲醛广泛应用于香精香料、染料、医药、农药、助剂等精细化工领域和合成材料工业中.采用多相光催化氧化甲苯制备苯甲醛,具有反应条件相对温和、产物选择性较高、催化剂与反应液的分离较容易等优点,正逐渐受到重视.本文从光催化反应机制、催化剂类型(包括TiO_2基、Bi基、Cd S基、g-C_3N_4基等)等方面进行综述和总结,分析了近10年来甲苯光催化选择性氧化的研究进展,最后结合本课题组在该方面的研究积累和认识,对甲苯光催化选择性氧化高效催化剂设计、制备以及光催化反应机制和高效光催化反应器的研发等方面进行了展望.     

Ag/CN/ZnIn2S4 S型异质结等离子体光催化剂的制备及其增强光还原CO2研究(英文)

S型异质结在电子的激发和输运方面具有优异的表现。本研究采用光沉积和水热法制备了Ag/CN/ZnIn₂S (ACZ) S型异质结复合光催化剂,其中,ACZ-60的CO和CH₄产率最高,分别为5.63μmol·g^-1和0.23μmol·g^-1,是CN的6.5倍和2.1倍。通过电子自旋共振(ESR)和紫外光电子能谱(UPS)的表征分析,得出ACZ遵循S型电子转移路径的结论,进一步通过光电化学和PL测试证明S型异质结的形成改善了原本单体催化剂电子空穴复合率高的问题,同时也增强了光吸收。另一方面,沉积在CN表面的Ag NPs既作为反应活性位点,又具有等离子效应,进一步增强了对可见光的吸收性能,有效提升了电子传递效率,同时为反应提供了更多的热电子。此外,通过原位红外解释了光催化还原CO₂可能的反应路径。本研究为设计具有等离子体效应的S型异质结光催化剂提供了新思路。     

Phase relations in the K2W2O7-K2WO4-KPO3-Bi2O3 system and structure of K6.5Bi2.5W4P6O34

The phase relations in the cross-section of the K₂W₂O₇-K₂WO₄-KPO₃ containing 15 mol% Bi₂O₃ were undertaken using flux method. Crystallization fields of K_6.5Bi_2.5W₄P₆O₃₄, K₂Bi(PO₄)(WO₄), Bi₂WO₆, KBi(WO₄)₂ and their cocrystallization areas were identified. Novel phase K_6.5Bi_2.5W₄P₆O₃₄ was characterized by single-crystal X-ray diffraction: sp. gr. P−1, a=9.4170(5), b=9.7166(4), c=17.6050(7) Å, α=90.052(5)°, β=103.880(5)° and γ=90.125(5)°. It has a layered structure, which contains {K₇Bi₅W₈P₁₂O₆₈}_∞ layers stacked parallel to ab plane and sheets composed by potassium atoms separating these layers. Sandwich-like {K₇Bi₅W₈P₁₂O₆₈}_∞ layers are assembled from [W₂P₂O₁₃]_∞ and [BiPO₄]_∞ building units, and are penetrated by tunnels with K/Bi atoms inside. FTIR-spectra of K₂Bi(PO₄)(WO₄) and K_6.5Bi_2.5W₄P₆O₃₄ were discussed on the basis of factor group theory.     

Sol-gel synthesis of K3InF6 and structural characterization of K2InC10O10H6F9, K3InC12O14H4F18 and K3InC12O12F18

K₃InF₆ is synthesized by a sol-gel route starting from indium and potassium acetates dissolved in isopropanol in the stoichiometry 1:3, with trifluoroacetic acid as fluorinating agent. The crystal structures of the organic precursors were solved by X-ray diffraction methods on single crystals. Three organic compounds were isolated and identified: K₂InC₁₀O₁₀H₆F₉, K₃InC₁₂O₁₄H₄F₁₈ and K₃InC₁₂O₁₂F₁₈. The first one, deficient in potassium in comparison with the initial stoichiometry, is unstable. In its crystal structure, acetate as well as trifluoroacetate anions are coordinated to the indium atom. The two other precursors are obtained, respectively, by quick and slow evaporation of the solution. They correspond to the final organic compounds, which give K₃InF₆ by decomposition at high temperature. The crystal structure of K₃InC₁₂O₁₄H₄F₁₈ is characterized by complex anions [In(CF₃COO)₄(OH_x)₂]^(5−2x)− and isolated [CF₃COOH_2−x]^(x−1)− molecules with x=2 or 1, surrounded by K⁺ cations. The crystal structure of K₃InC₁₂O₁₂F₁₈ is only constituted by complex anions [In(CF₃COO)₆]³⁻ and K⁺ cations. For all these compounds, potassium cations ensure only the electroneutrality of the structure. IR spectra of K₂InC₁₀O₁₀H₆F₉ and K₃InC₁₂O₁₂F₁₈ were also performed at room temperature on pulverized crystals.     

KCl-KBO2-K2CO3, K2MoO4-KBO2-K2CO3, and K2WO4-KBO2-K2CO3 ternary systems

phase diagrams of KCl-KBO₂-K₂CO₃, K₂MoO₄-KBO₂-K₂CO₃, and K₂WO₄-KBO₂-K₂CO₃ ternary systems were studied by a calculation-experimental method and differential thermal analysis (DTA). The coordinates of ternary eutectics were determined to be E ₁: 622°C, 8.5 mol % KBO₂, 56.5 mol % KCl, and 35 mol % K₂CO₃; E ₂: 710°C, 23 mol % KBO₂, 43 mol % K₂CO₃, and 34 mol % K₂MoO₄; E ₃: 710°C, 23 mol % KBO₂, 43 mol % K₂CO₃, and 34 mol % K₂WO₄. The specific heats of melting of the eutectics were determined.     

Li2SO4-Na2SO4-H2O和Li2SO4- K2SO4-H2O溶液的体积性质

本文用高精度数字式振荡管密度计测定了288K至318K温度范围内Li₂SO₄ + Na₂SO₄ + H₂O和 Li₂SO₄ + K₂SO₄ + H₂O三元体系的密度。混合溶液的离子强度范围从0.1到4.5 mol.kg_–1,混合溶液中Na₂SO₄和K₂SO₄的离子强度分数为0.2,0.4,0.6和0.8。用密度实验值拟合得到了不同温度下Pitzer离子相互作用模型混合参数θ_V和 ψ_V,模型的计算值与实验值的偏差在±0.002 g.cm_–3以内。用Pitzer模型计算了不同离子强度下三元体系的混合体积。     

Solubility in the Na2Cr2O7-(NH4)2Cr2O7-K2Cr2O7-H2O system

Solubility in the Na₂Cr₂O₇-(NH₄)₂Cr₂O₇-K₂Cr₂O₇-H₂O four-component water-salt system at 25, 50, and 75°C was studied for the first time. Phase field boundaries for individual salts and potassium and ammonium dichromate solid solutions, monovariant lines, and invariant points were determined. Experimental data were used to optimize the looped isohydric process of potassium dichromate preparation involving additional salts.     

NaBO2-NaCl-Na2CO3, NaBO2- Na2CO3-NaMoO4, NaBO2- Na2CO3-NaWO4, and NaBO2-NaCl-Na2WO4 ternary systems

The phase diagrams of the NaBO₂-NaCl-Na₂CO₃, NaBO₂-Na₂CO₃-Na₂MoO₄, NaBO₂- Na₂CO₃-Na₂WO₄, and NaBO₂-NaCl-Na₂WO₄ ternary systems were studied by a calculation-experimental method and differential thermal analysis. The coordinates of ternary eutectics were determined: E ₁: 612°C, 16 mol % NaBO₂, 42 mol % NaCl, and 42 mol % Na₂CO₃; E ₂: 568°C, 12 mol % NaBO₂, 28 mol % Na₂CO₃, and 60 mol % Na₂MoO₄; E ₃: 575°C, 12 mol % NaBO₂, 32 mol % Na₂CO₃, and 56 mol % Na₂WO₄; E ₄: 628°C, 8 mol % NaBO₂, 20 mol % NaCl, and 72 mol % Na₂WO₄; and E ₅: 655°C, 9 mol % NaBO₂, 53 mol % NaCl, and 38 mol % Na₂WO₄.     

Extension of the La7Mo7O30 structural type with La7Nb3W4O30 and La7Ta3W4O30 compounds

Two compounds of formula La₇A₃W₄O₃₀ (with A=Nb and Ta) were prepared by solid-state reaction at 1450 and 1490 °C. They crystallize in the rhombohedric space group R-3 (No. 148), with the hexagonal parameters: , and , . The structure of the materials was analyzed from X-ray, neutron and electronic diffraction. These oxides are isostructural of the reduced molybdenum compound La₇Mo₇O₃₀, which are formed of perovskite rod along [111]. An order between (Nb, Ta) and W is observed.     

Theoretical study of polyoxide clusters B20O30, Al20O30, V20O50, Si20O30H20, and Si20O30F20

The structural, electronic, and vibrational characteristics and energies of the isolated polyoxide clusters B₂₀O₃₀, Al₂₀O₃₀, V₂₀O₅₀, Si₂₀O₃₀H₂₀, and Si₂₀O₃₀F₂₀ and their complexes with the H⁻ ion and ammonia complexes Al₂₀O₃₀ · nNH₃ have been calculated by the density functional theory B3LYP method with different basis sets. The computation results show that the symmetric closo structure I _h with oxygen bridges located above the centers of the faces of an empty [M₂₀] dodecahedron is more favorable for V₂₀O₅₀, Si₂₀O₃₀H₂₀, and Si₂₀O₃₀F₂₀. For B₂₀O₃₀, the cage closo isomer is also more favorable than the other isomers, but its structure is severely distorted as compared to a dodecahedron and has a symmetry close to C ₃ . For Al₂₀O₃₀, the I _h structure corresponds to a high-lying local minimum of the potential energy surface. For Al₂₀O₃₀, a set of unusual puckshaped isomers of symmetry C _i , with different numbers of four-coordinate atoms ^IVAl and three-coordinate atoms ^IIIO, was localized; these structures are more than 90 kcal/mol more favorable than the dodecahedron I _h . The most favorable isomer of Al₂₀O₃₀ contains twelve four-coordinate atoms ^IVAl and four five-coordinate atoms ^VAl. The energies of dissociation of the most favorable M₂₀O₃₀ clusters into the M₂O₃ (C _2v ) and M₄O₆ (T _d ) fragments and, in the case of Al₂₀O₃₀, also into the Al₈O₁₂ (O _h ) and Al₁₂O₁₈ (D _3d ) fragments, have been estimated. The conclusion has been drawn that these clusters can, in principle, exist and can be experimentally detected in the isolated state. Analogous calculations have been performed for ammonia complexes Al₂₀O₃₀ · nNH₃ with n varying from 1 to 20. The effect of solvation on the relative stability of the dodecahedral and puckshaped isomers of the Al₂₀O₃₀ cluster is observed. The isomers with ammonia molecules in their first coordination sphere become much closer to one another on the energy scale; however, the dodecahedron remains a considerably less favorable intermediate. Original Russian Text ? O.P. Charkin, N.M. Klimenko, D.O. Charkin, 2008, published in Zhurnal Neorganicheskoi Khimii, 2008, Vol. 53, No. 4, pp. 624–635.     

Li2O-TiO2-SiO2-P2O5和Li2O-TiO2-Al2O3-P2O5体系锂离子固体电解质的制备及性能研究

一些具有NASICON型网格结构的固体电解质具有高的电导率和好的稳定性,NASICON的意思是Na Super Ionic Conductor[1]。当NaZr2(PO4)3中P5 被Si4 部分取代时便可以得到具有NASICON结构的Na1 xZr2SixP3-xO12体系,其具有高的钠离子电导率。然而有相同结构的Li1 xZr2SixP3-xO12体系的离子电导率却很低,这是因为Li 半径太小,而NASICON三维网格结构的离子通道太大,两者不匹配而使电导率下降[2]。但当LiZr2(PO4)3中Zr4 被离子半径小些的Ti4 取代,所得LiTi2(PO4)3的通道就与Li 半径相匹配,适合于锂离子的迁移,从而使其电导率…     

Structural chemistry of Sr3Cr2WO9, Ca3Cr2WO9, and Ba3Cr2WO9

We have studied the preparation and crystallographic structure of three perovskite-type compounds: Sr₃Cr₂WO₉, cubic, the lattice parameter of which is a = 7.812Å; Ca₃Cr₂WO₉, tetragonal, the lattice parameters of which are a = 5.408 Å and c = 7.635Å; and Ba₃Cr₂WO₉, hexagonal, the lattice parameters of which are a = 5.691 Å and c = 13.957Å. We have compared these three structures and shown the relationship between the dimensions of the alkaline-earth metal and the existence of the different structures.