Water-catalyzed O-H insertion/HI elimination reactions of isodihalomethanes (CH2X-I, where X = Cl, Br, I) with water and the dehalogenation of dihalomethanes in water-solvated environments

A combined experimental and theoretical investigation of the ultraviolet photolysis of CH2XI (where X = Cl, Br, I) dihalomethanes in water is presented. Ultraviolet photolysis of low concentrations of CH2XI (where X = Cl, Br, I) in water appears to lead to almost complete conversion into CH2(OH)2 and HX and HI products. Picosecond time-resolved resonance Raman (ps-TR3) spectroscopy experiments revealed that noticeable amounts of CH2X-I isodihalomethane intermediates were formed within several picoseconds after photolysis of the CH2XI parent compound in mixed aqueous solutions. The ps-TR3 experiments in mixed aqueous solutions revealed that the decay of the CH2X-I isodihalomethane intermediates become significantly shorter as the water concentration increases, indicating that the CH2X-I intermediates may be reacting with water. Ab initio calculations found that the CH2X-I intermediates are able to react relatively easily with water via a water-catalyzed O-H insertion/HI elimination reaction to produce CH2X(OH) and HI products, with the barrier for these reactions increasing as X changes from Cl to Br to I. The ab initio calculations also found that the CH2X(OH) product can undergo a water-catalyzed HX elimination reaction to make H2C=O and HX products, with the barrier to reaction decreasing as X changes from Cl to Br to I. The preceding two water-catalyzed reactions produce the HI and HX leaving groups observed experimentally, and the H2C=O product further reacts with water to make the other CH2(OH)2 product observed in the photochemistry experiments. This suggests that that the CH2X-I intermediates react with water to form the CH2(OH)2 and HI and HX products observed in the photochemistry experiments. Ultraviolet photolysis of CH2XI (where X = Cl, Br, I) at low concentrations in water-solvated environments appears to lead to efficient dehalogenation and release of two strong acid leaving groups. We very briefly discuss the potential influence of this photochemistry in water on the decomposition of polyhalomethanes and halomethanols in aqueous environments.     

Efficient dehalogenation of polyhalomethanes and production of strong acids in aqueous environments: water-catalyzed O--H-insertion and HI-elimination reactions of isodiiodomethane (CH2I-I) with water

A combined experimental and theoretical study of the ultraviolet photolysis of CH2I2 in water is reported. Ultraviolet photolysis of low concentrations of CH2I2 in water was experimentally observed to lead to almost complete conversion into CH2(OH)2 and 2HI products. Picosecond time-resolved resonance Raman spectroscopy experiments in mixed water/acetonitrile solvents (25%-75% water) showed that appreciable amounts of isodiiodomethane (CH2I-I) were formed within several picoseconds and the decay of the CH2I-I species became substantially shorter with increasing water concentration, suggesting that CH2I-I may be reacting with water. Ab initio calculations demonstrate the CH2I-I species is able to react readily with water via a water-catalyzed O--H-insertion and HI-elimination reaction followed by its CH2I(OH) product undergoing a further water-catalyzed HI-elimination reaction to make a H2C=O product. These HI-elimination reactions produce the two HI leaving groups observed experimentally and the H2C=O product further reacts with water to produce the other final CH2(OH)2 product observed in the photochemistry experiments. These results suggest that CH2I-I is the species that reacts with water to produce the CH2(OH)2 and 2HI products seen in the photochemistry experiments. The present study demonstrates that ultraviolet photolysis of CH2I2 at low concentration leads to efficient dehalogenation and release of multiple strong acid (HI) leaving groups. Some possible ramifications for the decomposition of polyhalomethanes and halomethanols in aqueous environments as well as the photochemistry of polyhalomethanes in the natural environment are briefly discussed.     

Reactions of late lanthanide metal atoms and methanol in solid argon: a matrix isolation infrared spectroscopic and theoretical study

The reactions of laser-ablated late lanthanide atoms and methanol were studied using matrix isolation infrared spectroscopy and electronic structure calculations at the density functional theory level. Both terbium and lutetium atoms react with methanol spontaneously to form the CH(3)OTbH and CH(3)OLuH insertion products, which react further with another methanol molecule to give the Tb(OCH(3))(2) and Lu(OCH(3))(2) products as found previously for uranium. The reactions of Dy through Yb and methanol first produce Ln(CH(3)OH) complexes during sample annealing, which isomerize to the CH(3)OLnH insertion products on visible irradiation. The Ln-H stretching frequencies of the CH(3)OLnH molecules exhibit a unique trend from Tb to Lu, which is also reproduced by theoretical calculations at the B3LYP level of theory. Although the CH(3)LnOH molecules are predicted to be more stable than the O-H bond insertion products, formation of the C-O bond insertion isomers is kinetically prohibited as revealed by calculated potential energy surfaces.     

The atmospheric oxidation of diethyl ether: chemistry of the C2H5-O-CH(O.)CH3 radical between 218 and 335 K

The products of the Cl atom initiated oxidation of diethyl ether (DEE) were investigated at atmospheric pressure over a range of temperatures (218-335 K) and O(2) partial pressures (50-700 Torr), both in the presence and absence of NO(x). The major products observed at 298 K and below were ethyl formate and ethyl acetate, which accounted for approximately equal to 60-80% of the reacted diethyl ether. In general, the yield of ethyl formate increased with increasing temperature, with decreasing O(2) partial pressure, and upon addition of NO to the reaction mixtures. The product yield data show that thermal decomposition reaction 3, CH(3)CH(2)-O-CH(O.)CH(3)--> CH(3)CH(2)-O-CH=O + CH(3), and reaction 6 with O(2), CH(3)CH(2)-O-CH(O.)CH(3) + O(2)--> CH(3)CH(2)-O-C(=O)CH(3) + HO(2) are competing fates of the CH(3)CH(2)-O-CH(O )CH(3) radical, with a best estimate of k3/k6 approximately equal to 6.9 x 10(24) exp(-3130/T). Thermal decomposition via C-H or C-O bond cleavage are at most minor contributors to the CH(3)CH(2)-O-CH(O.)CH(3) chemistry. The data also show that the CH(3)CH(2)-O-CH(O.)CH(3) radical is subject to a chemical activation effect. When produced from the exothermic reaction of the CH(3)CH(2)-O-CH(OO.)CH(3) radical with NO, prompt decomposition via both CH(3)- and probably H-elimination occur, with yields of about 40% and < or =15%, respectively. Finally, at temperatures slightly above ambient, evidence for a change in mechanism in the absence of NO(x), possibly due to chemistry involving the peroxy radical CH(3)CH(2)-O-CH(OO.)CH(3), is presented.     

Isodiiodomethane is the methylene transfer agent in cyclopropanation reactions with olefins using ultraviolet photolysis of diiodomethane in solutions: a density functional theory investigation of the reactions of isodiiodomethane, iodomethyl radical, and iodomethyl cation with ethylene.

We examine the chemical reactions of the isodiiodomethane (CH2I-I), .CH2I and CH2I(+) species with ethylene using density functional theory computations. The CH2I-I species readily reacts with ethylene to give the cyclopropane product and an I2 product via a one-step reaction with a barrier height of approximately 2.9 kcal/mol. However, the.CH2I and CH2I(+) species have much more difficult pathways (with larger potential barriers) to react with ethylene via a two-step reaction mechanism. Comparison of experimental results to our present calculation results indicates that the CH2I-I photoproduct species is most likely the methylene transfer agent for the cyclopropanation reaction of olefins via ultraviolet photoexcitation of diiodomethane.     

Coupling versus surface-etching reactions of alkyl halides on GaAs(100): I. CF3CH2I reactions

We report the rich surface chemistry exhibited by the reactions of 1,1,1-trifluoroethyl iodide (CF3CH2I) adsorbed onto gallium-rich GaAs(100)-(4 x 1), studied by temperature-programmed desorption (TPD) and low-energy electron diffraction (LEED) studies and X-ray photoelectron spectroscopy (XPS). CF3CH2I adsorbs molecularly at 150 K but dissociates, below room temperature, to form a chemisorbed monolayer of CF3CH2 and I species. Recombinative desorption of molecular CF3CH2I competes with the further reactions of the CF3CH2 and I chemisorbed species. The CF3CH2 species can either undergo beta-fluoride elimination to yield gaseous CF2=CH2 or it can undergo self-coupling to form the corresponding higher alkane, CF3CH2CH2CF3. A second coupling product, CF3CH2CH=CF2, is also evolved, and it is postulated that migratory insertion of the liberated CF2=CH2 into the surface-carbon bond of the chemisorbed CF3CH2 is responsible for its formation. The iodines, formed by C-I scission in the chemisorbed CF3CH2I, and the fluorines, derived from beta-fluoride elimination in CF3CH2, react with the surface gallium dimers, and Ga-As back-bonds to generate five etch products (GaF, AsF, GaI, AsI, and As2) that desorb in the temperature range of 420 to >600 K. XPS data reveal that the surface stoichiometry remains constant throughout the entire annealing temperature range because of the desorption of both gallium- and arsenic-containing etch products, which occur sequentially. In this article, plausible mechanisms by which all products form and the binding sites of these reactions in the (4 x 1) reconstruction are discussed. Factors that control the rate constants of etch product versus hydrocarbon product formation and in particular how they impact on the respective desorption temperatures will be discussed.     

Product detection of the CH radical reaction with acetaldehyde

The reaction of the methylidyne radical (CH) with acetaldehyde (CH(3)CHO) is studied at room temperature and at a pressure of 4 Torr (533.3 Pa) using a multiplexed photoionization mass spectrometer coupled to the tunable vacuum ultraviolet synchrotron radiation of the Advanced Light Source at Lawrence Berkeley National Laboratory. The CH radicals are generated by 248 nm multiphoton photolysis of CHBr(3) and react with acetaldehyde in an excess of helium and nitrogen gas flow. Five reaction exit channels are observed corresponding to elimination of methylene (CH(2)), elimination of a formyl radical (HCO), elimination of carbon monoxide (CO), elimination of a methyl radical (CH(3)), and elimination of a hydrogen atom. Analysis of the photoionization yields versus photon energy for the reaction of CH and CD radicals with acetaldehyde and CH radical with partially deuterated acetaldehyde (CD(3)CHO) provides fine details about the reaction mechanism. The CH(2) elimination channel is found to preferentially form the acetyl radical by removal of the aldehydic hydrogen. The insertion of the CH radical into a C-H bond of the methyl group of acetaldehyde is likely to lead to a C(3)H(5)O reaction intermediate that can isomerize by β-hydrogen transfer of the aldehydic hydrogen atom and dissociate to form acrolein + H or ketene + CH(3), which are observed directly. Cycloaddition of the radical onto the carbonyl group is likely to lead to the formation of the observed products, methylketene, methyleneoxirane, and acrolein.     

Palladium(II)-catalyzed oxidation of aldehydes and ketones. 1. Carbonylation of ketones with carbon monoxide catalyzed by palladium(II) chloride in methanol.

Unsubstituted or alkyl-substituted cyclic ketones react with PdCl2 in methanol under a CO atmosphere to give mainly acyclic diesters along with some acyclic chloro-substituted monoesters. The monosubstituted cyclic ketones, 2-hydroxy- and 2-methoxycyclohexanone, do not give ring cleavage but rather produce 2-(carbomethoxy)cyclohex-2-en-1-one. 13CO labeling experiments indicate one CO is inserted in forming the diester product so the second ester group must arise from the original ketone group. Two mechanisms are possible for the diester reaction. One involves initial Pd(II)-CO2CH3 insertion across the double bond of the enol form of the ketone while the second involves initial addition of Pd(II)-OCH3 followed by CO insertion into the new Pd(II)-carbon bond formed. Pd(II) elimination and acid-catalyzed ring cleavage produce the second methyl ester group in both routes. The chloro-substituted monoester is formed by initial Pd(II)-Cl insertion across the double bond followed by the acid-catalyzed ring cleavage. The 2-(carbomethoxy)cyclohex-2-en-1-one must result from elimination of water or methanol from the alpha-ketoester product formed by the initial methoxycarbonylation of the enol form of the ketone. As expected, the acyclic ketone, 2-decanone, formed methyl acetate and a mixture of methyl nonanoate and 1-chlorooctane as products.     

Coupling vs surface-etching reactions of alkyl halides on GaAs(100). 2. CH2I2 reactions

Surface reactions of CH2I2 on gallium-rich GaAs(100)-(4 x 1), studied by temperature programmed desorption and X-ray photoelectron spectroscopy (XPS), show CH2I2 adsorbs dissociatively at liquid nitrogen temperatures to form surface chemisorbed CH2(ads) and I(ads) species. Controlled hydrogenation of a fraction of the CH2(ads) species in the chemisorbed layer by the background hydrogen radicals results in a surface layer comprising both CH3(ads) and CH2(ads) species. This hydrogenation step initiates a plethora of further surface reactions involving these two species and I(ads). Thermal activation leads to three sequential methylene insertions (CH2(ads)) into the CH3-surface bond to form three higher alkyl (ethyl (C2), propyl (C3), and butyl (C4)) species, which undergo beta-hydride elimination to evolve the respective higher alkene (ethene, propene, and butene). In competition with beta-hydride elimination, reductive elimination of the ethyl and propyl species with I(ads) occurs to liberate the respective alkyl iodide. Beta-hydride elimination in the alkyls, in the temperature range 420-520 K, is the more dominant pathway, and it is also the rate-limiting step for further chain propagation. The evolution of the alkyl iodides represents the only pathway for the removal of surface iodines in this study and is different from previous investigations where gallium and arsenic iodide etch products (GaI(x), AsI(x) (x = 1-3)) formed instead. The desorption of methane and methyl iodide, formed from surface CH3(ads) species at high temperatures by the reaction between surface methylenes and hydrogens eliminated from the surface C2-C4 alkyls, terminates the chain propagation. We discuss the reaction mechanisms by which the observed reaction products form and postulate reasons for the reaction pathways adopted by the surface species.     

Selective oxidation of methanol and ethanol on supported ruthenium oxide clusters at low temperatures

RuO2 domains supported on SnO2, ZrO2, TiO2, Al2O3, and SiO2 catalyze the oxidative conversion of methanol to formaldehyde, methylformate, and dimethoxymethane with unprecedented rates and high combined selectivity (>99%) and yield at low temperatures (300-400 K). Supports influence turnover rates and the ability of RuO2 domains to undergo redox cycles required for oxidation turnovers. Oxidative dehydrogenation turnover rates and rates of stoichiometric reduction of RuO2 in H2 increased in parallel when RuO2 domains were dispersed on more reducible supports. These support effects, the kinetic effects of CH3OH and O2 on reaction rates, and the observed kinetic isotope effects with CH3OD and CD3OD reactants are consistent with a sequence of elementary steps involving kinetically relevant H-abstraction from adsorbed methoxide species using lattice oxygen atoms and with methoxide formation in quasi-equilibrated CH3OH dissociation on nearly stoichiometric RuO2 surfaces. Anaerobic transient experiments confirmed that CH3OH oxidation to HCHO requires lattice oxygen atoms and that selectivities are not influenced by the presence of O2. Residence time effects on selectivity indicate that secondary HCHO-CH3OH acetalization reactions lead to hemiacetal or methoxymethanol intermediates that convert to dimethoxymethane in reactions with CH3OH on support acid sites or dehydrogenate to form methylformate on RuO2 and support redox sites. These conclusions are consistent with the tendency of Al2O3 and SiO2 supports to favor dimethoxymethane formation, while SnO2, ZrO2, and TiO2 preferentially form methylformate. These support effects on secondary reactions were confirmed by measured CH3OH oxidation rates and selectivities on physical mixtures of supported RuO2 catalysts and pure supports. Ethanol also reacts on supported RuO2 domains to form predominately acetaldehyde and diethoxyethane at 300-400 K. The bifunctional nature of these reaction pathways and the remarkable ability of RuO2-based catalysts to oxidize CH3OH to HCHO at unprecedented low temperatures introduce significant opportunities for new routes to complex oxygenates, including some containing C-C bonds, using methanol or ethanol as intermediates derived from natural gas or biomass.     

Direct observation of an isopolyhalomethane O-H insertion reaction with water: picosecond time-resolved resonance Raman (ps-TR3) study of the isobromoform reaction with water to produce a CHBr2OH product

Picosecond time-resolved resonance Raman (ps-TR3) spectroscopy was used to obtain the first definitive spectroscopic observation of an isopolyhalomethane O-H insertion reaction with water. The ps-TR3 spectra show that isobromoform is produced within several picoseconds after photolysis of CHBr3 and then reacts on the hundreds of picosecond time scale with water to produce a CHBr2OH reaction product. Photolysis of low concentrations of bromoform in aqueous solution resulted in noticeable formation of HBr strong acid. Ab initio calculations show that isobromoform can react with water to produce a CHBr2(OH) O-H insertion reaction product and a HBr leaving group. This is consistent with both the ps-TR3 experiments that observe the reaction of isobromoform with water to form a CHBr2(OH) product and photolysis experiments that show HBr acid formation. We briefly discuss the implications of these results for the phase dependent behavior of polyhalomethane photochemistry in the gas phase versus water solvated environments.     

Imaging adsorbate O-H bond cleavage: methanol on TiO2(110)

We investigated methanol adsorption and dissociation on bridge-bonded oxygen vacancies of the TiO2(110)-(1x1) surface using in situ scanning tunneling microscopy. We provide the first direct evidence that methanol dissociates on oxygen vacancies via O-H bond scission rather than C-O scission. For CH3OH coverages lower than the oxygen vacancy concentration, stationary methoxy-hydroxyl pairs form. At CH3OH coverages close to the oxygen vacancy concentration undissociated mobile CH3OH interacts with methoxy-hydroxyl pairs and facilitates the movement of hydroxyl away from the methoxy group.     

甲醇直接气相羰基化反应动力学

甲醇直接气相羰基化研究 ,是在无任何促进剂下 ,ＣＯ与甲醇直接进行羰基化反应 ,这与目前公认的甲醇必须有碘化物作用下构成催化循环的间接羰化不同 ,在催化理论上有可能提出新的羰基化机理。彭峰等在甲醇直接气相羰基化方面 ,对具有高活性与选择性的非铑非卤素Ｍｏ Ｃ催化剂体系进行了系列研究 ,并取得了较好的实验结果[1～ 5] 。有碘甲烷参与的甲醇羰基化液相或者气相反应 ,大多数文献认为控制步骤是碘化物中Ｃ -Ｉ键的解离及ＣＯ的插入 ,羰基化反应是由一系列平行和连串反应组成的[6～ 8] 。催化剂类型不同得到的动力学参数也不相同 ,难…     

Insertion of O-H Bond of Rh(Ⅱ)-methylene Carbene into Alcohols: A Stepwise Mechanism More Plausible than a Concerted Mechanism

The mechanisms of insertion of O-H bond of Rh( Ⅱ ) -methylene carbene into methanol and ethanol were studied by using B3LYP functional both in gas phase and in CH2Cl2. The formation of free alcoholic oxonium ylides is found to be impossible. Alcoholic oxonium ylide are formed as the intermediates before both the stepwise and the concerted transition states of insertion of O-H bond of Rh( Ⅱ ) -methylene carbene into methanol and ethanol. With regard to the mechanisms of insertion of O-H of Rh( Ⅱ ) -methylene carbene into alcohols, analysis of the energy barriers of the two mechanisms indicate that the stepwise mechanism is more plausible than the concerted mechanism.     

A spectroscopic investigation of carbon-carbon bond formation by methylene insertion on a Ag(111) surface: mechanism and kinetics

Using reflection-absorption infrared spectroscopy (RAIRS) and temperature-programmed reaction spectroscopy (TPRS), we have investigated the cross-coupling reaction between CH(2)(a) and CF(3)(a) on a Ag(111) surface. CH(2)(a) and CF(3)(a) are generated by thermal decomposition of adsorbed CH(2)I(2) and CF(3)I. RAIRS results unambiguously demonstrate that CH(2)(a) inserts into the Ag-CF(3) bond to produce adsorbed CF(3)CH(2)(a), which upon heating selectively undergoes beta-fluorine elimination to form CH(2)=CF(2). Increasing the CH(2)(a) and CF(3)(a) coverage leads to the sequential insertion of CH(2)(a) into Ag-CF(3), as evidenced by CH(2)CH(2)CF(3)(a) formation detected with RAIRS. Prior to the insertion reaction, the evidence favors islanding of fragments. The methylene insertion reaction is so facile that it occurs at cryogenic temperatures (120 K). Time-resolved RAIRS (TR-RAIRS) results at selected temperatures reveal an activation energy of 5.8 kJ/mol. Our results provide, for the first time, direct spectroscopic information about the mechanism and kinetics of the methylene insertion reaction.     

Gas-phase synthesis and reactivity of the organomagnesates [CH3MgL2]- (L = Cl and O2CCH3): from ligand effects to catalysis

Multistage mass spectrometry experiments combined with density functional theory (DFT) calculations were used to examine the gas-phase synthesis and ion-molecule reactions of the organomagnesates [CH(3)MgL(2)](-) (L = Cl and O(2)CCH(3)). Neutral species containing an acidic proton (HX) react with the [CH(3)MgL(2)](-) ions via addition with concomitant elimination of methane to form [XMgL(2)](-) ions. Kinetic measurements combined with DFT calculations revealed reduced reactivity of [CH(3)Mg(O(2)CCH(3))(2)](-) toward water, caused by the bidentate binding mode of acetate, which induces overcrowding of the Mg coordination sphere. The [CH(3)MgL(2)](-) ions reacted with (i) aldehydes with enolizable protons via enolization rather than the Grignard reaction and (ii) CH(3)CO(2)H to complete a catalytic cycle for the decarboxylation of acetic acid. Other electrophilic reagents such as pivaldehyde, benzaldehyde, methyl iodide, and trimethylborate are unreactive. DFT calculations on the competition between enolization and the Grignard reaction for [CH(3)MgCl(2)](-) ions reacting with acetaldehyde suggest that while the latter has a smaller barrier, it is entropically disfavored.     

Water-catalyzed dehalogenation reactions of isobromoform and its reaction products

A combined experimental and theoretical study of the photochemistry of CHBr(3) in pure water and in acetonitrile/water mixed solvents is reported that elucidates the reactions and mechanisms responsible for the photochemical conversion of the halogen atoms in CHBr(3) into three bromide ions in water solution. Ultraviolet excitation at 240 nm of CHBr(3) (9 x 10(-)(5) M) in water resulted in almost complete conversion into 3HBr leaving groups and CO (major product) and HCOOH (minor product) molecules. Picosecond time-resolved resonance Raman (ps-TR(3)) experiments and ab initio calculations indicate that the water-catalyzed O-H insertion/HBr elimination reaction of isobromoform and subsequent reactions of its products are responsible for the production of the final products observed following ultraviolet excitation of CHBr(3) in water. These results have important implications for the phase-dependent behavior of polyhalomethane photochemistry and chemistry in water-solvated environments as compared to gas-phase reactions. The dissociation reaction of HBr into H(+) and Br(-) ions is the driving force for several O-H insertion and HBr elimination reactions and allows O-H and C-H bonds to be cleaved more easily than in the absence of water molecules. This water-catalysis by solvation of a leaving group and its dissociation into ions (e.g., H(+) and Br(-) in the examples investigated here) may occur for a wide range of chemical reactions taking place in water-solvated environments.     

Direct spectroscopic evidence of the cross-coupling reaction between CH(2)(a) and CF(3)(a) on Ag(111)

The cross-coupling reaction between CH2 and CF3 on Ag(111) was studied with reflection absorption infrared spectroscopy (RAIRS) and temperature-programmed reaction spectroscopy (TPRS). Adsorbed CF3CH2(a) was, for the first time, spectroscopically identified as an intermediate in the reaction to form CF2CH2. It is formed by migratory methylene insertion into Ag-CF3. CF3CH2(a) undergoes beta-fluoride elimination to form CF2CH2. Our results provide direct new fundamental insight into Fischer-Tropsch synthesis.     

On the chemical processing of hydrocarbon surfaces by fast oxygen ions

Solid methane (CH(4)), ethane (C(2)H(6)), and ethylene (C(2)H(4)) ices (thickness: 120 ± 40 nm; 10 K), as well as high-density polyethylene (HDPE: [C(2)H(4)](n)) films (thickness: 130 ± 20 nm; 10, 100, and 300 K), were irradiated with mono-energetic oxygen ions (Φ ~ 6 × 10(15) cm(-2)) of a kinetic energy of 5 keV to simulate the exposure of Solar System hydrocarbon ices and aerospace polymers to oxygen ions sourced from the solar wind and planetary magnetospheres. On-line Fourier-transform infrared spectroscopy (FTIR) was used to identify the following O(+) induced reaction pathways in the solid-state: (i) ethane formation from methane ice via recombination of methyl (CH(3)) radicals, (ii) ethane conversion back to methane via methylene (CH(2)) retro-insertion, (iii) ethane decomposing to acetylene via ethylene through successive hydrogen elimination steps, and (iv) ethylene conversion to acetylene via hydrogen elimination. No changes were observed in the irradiated PE samples via infrared spectroscopy. In addition, mass spectrometry detected small abundances of methanol (CH(3)OH) sublimed from the irradiated methane and ethane condensates during controlled heating. The detection of methanol suggests an implantation and neutralization of the oxygen ions within the surface where atomic oxygen (O) then undergoes insertion into a C-H bond of methane. Atomic hydrogen (H) recombination in forming molecular hydrogen and recombination of implanted oxygen atoms to molecular oxygen (O(2)) are also inferred to proceed at high cross-sections. A comparison of the reaction rates and product yields to those obtained from experiments involving 5 keV electrons, suggests that the chemical alteration of the hydrocarbon ice samples is driven primarily by electronic stopping interactions and to a lesser extent by nuclear interactions.     

An iron(II) dihydrogen hydrido complex containing the tripodal tetraphosphine ligand P(CH2CH2PMe2)3

The dihydrogen hydrido complex [FeH(H2)(PP3)]+ 1 (PP3 = P(CH2CH2PMe2)3 2) was formed by the protonation of the dihydrido complex FeH2(PP3) 3 with methanol or ethanol. The observation of H-D coupling in partially deuterated isotopomers of 1 and measurement of T1 relaxation times for the hydrido and dihydrogen resonances of 1 confirmed the presence of the eta2-dihydrogen ligand. Complex 1 shows dynamic NMR behaviour in both the 31P and 1H NMR spectra with facile exchange between the protons in the eta2-dihydrogen ligand and the eta1-hydrido ligand. The dihydrogen ligand of 1 is easily displaced by both anionic and neutral ligands to afford the corresponding hydrido complexes [FeHX(PP3)]+ (X = CO 11, X = PPh3 12) or FeHX(PP3)(X = Cl 13, X = Br 14, X = I 15, X = N3 16). Small quantities of the alkoxy hydrido complexes FeH(OR)(PP3)(R = Me 4; R = Et 5) are observed in methanol and ethanol solutions containing 1. In methanol solution, FeH(OMe)(PP3) 4 reacts to form the carbonyl hydrido complex [FeH(CO)(PP3)]+ 11 and isotopic labelling confirms that the carbonyl ligand of 11 is derived from the methanol solvent. The mechanism of methanol oxidation presumably proceeds through beta-hydride elimination from FeH(OMe)(PP3) to produce formaldehyde as an intermediate which is further dehydrogenated to form the carbonyl ligand. [FeH(H2)(PP3)]+ 1 and FeHCl(PP3) 13 react rapidly with paraformaldehyde to also form [FeH(CO)(PP3)]+ 11. Complex 11 also decarbonylates acetaldehyde to afford the methyl carbonyl complex [FeMe(CO)(PP3)]+ 17. The structure of 17 was confirmed by X-ray crystallography.