Synthesis of poly(vinylene arsine)s through the ring‐collapsed radical alternating copolymerization of an organoarsenic homocycle with aliphatic acetylenes and their properties

Poly(vinylene arsine)s with no aromatic substituent ([? CH?CR? AsMe? ]_n) were prepared through a radical alternating copolymerization of acetylenic compounds having an alkyl substituent with an organoarsenic homocycle as an arsenic‐atomic biradical equivalent. The radical reaction between 1‐octyne and pentamethylcyclopentaarsine, with a catalytic amount of 2,2′‐azobisisobutyronitrile without a solvent (60 °C, 10 h), produced the corresponding poly(vinylene arsine)s (45% yield). The copolymers obtained were soluble in tetrahydrofuran, chloroform, hexane, and so on. The copolymers were characterized with ¹H and ¹³C NMR spectra. The number‐average molecular weights of the copolymers were estimated with gel permeation chromatography (chloroform and polystyrene standards) to be 6500. The copolymers showed an emission property attributable to the n–π* transition in the main chain. Irradiation by an incandescent lamp of a mixture of 1‐octyne and 1 also produced poly(vinylene arsine)s. The conversion rate of 1‐octyne during the copolymerization with 2,2′‐azobisisobutyronitrile was measured with gas chromatography analysis and was found to be much slower than that of phenylacetylene. A radical terpolymerization of cyclo‐(AsMe)₅ with 1‐octyne and styrene was carried out to yield the terpolymer. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3604–3611, 2004     

Synthesis and characterization of poly(phenylacetylene)s carrying oligo(ethylene oxide) pendants

A group of new amphiphilic poly(phenylacetylene)s bearing polar oligo(ethylene oxide) pendants, poly{4‐[2‐(2‐hydroxyethoxy)ethoxy]phenylacetylene} ( 1 ), poly(4‐{2‐[2‐(2‐hydroxyethoxy)‐ethoxy]ethoxy}phenylacetylene) ( 2p ), poly(3‐{2‐[2‐(2‐hydroxyethoxy)ethoxy]ethoxy}phenylacetylene) ( 2m ), poly(4‐{2‐[2‐(2‐methanesulfonyloxyethoxy)ethoxy]ethoxy}phenylacetylene) ( 3 ), poly(4‐{2‐[2‐(p‐toluenesulfonyloxyethoxy)ethoxy]ethoxy}phenylacetylene) ( 4 ), poly(4‐{2‐[2‐(2‐trimethylsilyloxy‐ethoxy)ethoxy] ethoxy}phenylacetylene) ( 5 ), and poly(4‐{2‐[2‐(2‐chloroethoxy)ethoxy]ethoxy}phenylacetylene) ( 6 ), were synthesized with organorhodium complexes as the polymerization catalysts. The structures and properties of the polymers were characterized with IR, UV, NMR, and thermogravimetric analysis. 1 , 2p , and 2m , the three polymers containing pendants with hydroxyl groups, were oligomeric or insoluble. The organorhodium complexes worked well for the polymerization of the monomers without hydroxyl groups, giving soluble polymers 3 – 6 with a weight‐average molecular weight up to ～160 × 10³ and a yield up to 99%. Z‐rich polymers 3 – 6 could be prepared by judicious selections of the catalyst under optimal conditions. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1153–1167, 2006     

Cobalt‐catalyzed alternating and nonalternating copolymerization of carbon monoxide with aziridine

Catalysts CH₃COCo(CO)₃PPh₃ ( 1 ) and HCo(CO)₃PPh₃ ( 2 ) catalyze the copolymerization of aziridine and carbon monoxide. Catalyst 2 can be conveniently generated in situ via reaction of Na⁺Co(CO)₄, N,N‐dimethylanilinium chloride, and PPh₃. The copolymerization alternates at high catalyst loadings to produce poly(β‐alanine). The end groups of the poly(β‐alanine) product are characterized by matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry and by comparison of the ¹H NMR spectra of the polymer and a stepwise synthesized model compound. At low catalyst loadings, the polymer product contains both the β‐alanine units and amine units because of nonalternating enchainment of the comonomers. The characterization of the amine units is again supported by comparison of the ¹H NMR spectra of the polymers and the stepwise synthesized model compounds. The molecular weights of the polymers are determined by gel permeation chromatography. The thermal stability of the polymers is probed by differential scanning calorimetry and thermogravimetric analysis. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 376–385, 2003     

Stereochemistry of the free‐radical polymerization of zinc methacrylates coordinated with a bidentate ligand

The polymerization of zinc methacrylates coordinated with a bidentate ligand ( 1 – 4 ) was carried out in chloroform at 60°C. The polymerization of these monomers gave chloroform‐insoluble polymers. Stereoregularity of the polymers was estimated from ¹H NMR spectra of poly(methyl methacrylate)s (PMMAs) derived from the original polymers. Monomers 1 and 2 gave slightly different polymers compared with conventional ones obtained by polymerization of methacrylic acid, while 3 afforded higher amounts of isotactic polymers than 1 and 2 . Conversely, 4 gave a polymer of high syndiotacticity. Furthermore, the relationship between triad tacticity and monomer concentration in the feed was studied. Consequently, it was demonstrated that the structure of bidentate ligands coordinated with zinc ion influences the stereoregularity of the resulting polymers.     

Synthesis and micellization of star‐like hyperbranched polymer with poly(ethylene oxide) and poly(ε‐caprolactone) arms

Novel star‐like hyperbranched polymers with amphiphilic arms were synthesized via three steps. Hyperbranched poly(amido amine)s containing secondary amine and hydroxyl groups were successfully synthesized via Michael addition polymerization of triacrylamide (TT) and 3‐amino‐1,2‐propanediol (APD) with feed molar ratio of 1:2. ¹H, ¹³C, and HSQC NMR techniques were used to clarify polymerization mechanism and the structures of the resultant hyperbranched polymers. Methoxyl poly(ethylene oxide) acrylate (A‐MPEO) and carboxylic acid‐terminated poly(ε‐caprolactone) (PCL) were sequentially reacted with secondary amine and hydroxyl group, and the core–shell structures with poly(1TT‐2APD) as core and two distinguishing polymer chains, PEO and PCL, as shell were constructed. The star‐like hyperbranched polymers have different sizes in dimethyl sulfonate, chloroform, and deionized water, which were characterized by DLS and ¹H NMR. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1388–1401, 2008     

SYNTHESES AND CHARACTERIZATIONS OF HYPERBRANCHED POLYPHENYLENES

Hyperbranched polymers have attracted much attention over the past decade because of the expectation that theirunique molecular shape, branching pattern and surface functionality may impart unusual properties. Methods forthe synthesis of hyperbranched polymers are, however, rather limited. Cyclotrimerization of alkynes to aromaticrings is a century-old reaction. Although chemists have intensively investigated cyclotrimerization of variousdiynes in the last century, their attention was mainly f…     

A practical route for the preparation of poly(4‐hydroxystyrene), a useful photoresist material

The synthesis and characterization of poly(4‐hydroxystyrene) (PHS) and poly(4‐vinylphenol) (PVPh) by the polymer modification route are reported. Polystyrene prepared by free‐radical and anionic polymerization was acetylated quantitatively to poly(4‐acetylstyrene) (ACPS) with acetyl chloride and anhydrous aluminum trichloride in carbon disulfide. The acetylation worked equally well in a mixture of 1,2‐dichloroethane (DCE) and nitrobenzene containing largely DCE. The extent of the acetylation was estimated by ¹H NMR. The oxidation of ACPS was carried out with various oxidizing agents and reaction conditions. The peracetic acid oxidation in chloroform resulted in quantitative oxidation to poly(4‐acetoxystyrene) (APS) as estimated by ¹H NMR spectroscopy. The treatment of APS with hydrazine hydrate in dioxane resulted in the formation of PVPh. Deacetylation occurred with equal versatility in a mixture of aqueous sodium hydroxide and tetrahydrofuran. All the polymers were characterized via gel permeation chromatography, IR, UV, ¹H NMR, and ¹³C NMR spectroscopic techniques. This is the first report on the synthesis of ACPS, APS, and PHS of reasonably narrow molecular weight distributions or otherwise by the polymer modification route. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 453–461, 2000     

One‐pot synthesis of polyrotaxane by clipping and cyclopolymerization of α,ω‐diethynyl isophthalamide with pyridiniumdicarboxamide chloride

The one‐pot synthesis of a main chain‐type polyrotaxane composed of axle molecules threaded through the macrocyclic units on the polymer main chain was achieved via the combination of cyclopolymerization and clipping procedures. The cyclopolymerization of an α,ω‐diethynyl monomer bearing an isophthalamide moiety ( 1 ), which clips onto an axle component bearing a pyridiniumdicarboxamide moiety ( 2·Cl ) through a chloride anion was carried out in chloroform with the monomer concentration of 0.06 mol L^?1 at 40 °C using [Rh(nbd)Cl]₂/Et₃N as a catalyst to afford a gel‐free polymer. The resulting polymer was assigned to the main chain‐type polyrotaxane with a poly(phenylacetylene) backbone (poly‐ 3·Cl ) based on size exclusion chromatography and ¹H NMR measurements. The diffusion‐order two‐dimensional NMR and circular dichroism spectra provided definitive proof of the rotaxaned architecture in the polymer. The mole fraction of the rotaxane unit in the total cyclic repeating unit was determined to be 26.3%. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

用双官能团引发剂进行的原子转移自由基嵌段和无规共聚

原子转移自由基聚合［１］,可同时适用于非极性单体和极性单体,如苯乙烯、二烯烃类和（甲基）丙烯酸酯、丙烯腈类单体［１～３］,这是传统的活性聚合如阴离子聚合和基团转移聚合所不及的;可以用于制备包括无规、嵌段、星形与高支化物在内的诸多结构清晰的高分子化合物...     

侧链含萘可交联聚芳醚酮的合成及性能

以4,4'-二羟基苯基正戊酸和4,4'-二氟二苯酮为原料, 二甲基亚砜(DMSO)为溶剂, 采用亲核取代反应合成侧基含羧基的聚芳醚酮均聚物, 进一步与1-萘酚和2-萘酚接枝制备新型含萘可交联聚芳醚酮. 用核磁共振(NMR)、红外光谱(FTIR)、示差扫描量热(DSC)和热重分析(TGA)表征其结构和性能, 含萘聚芳醚酮在常用有机溶剂如N,N-二甲基乙酰胺(DMAc)、DMSO, 四氢呋喃(THF)中有良好的溶解性, 并具有很好的成膜性. DSC测试结果显示, 在170℃热处理2 h的交联聚合物的玻璃化转变温度(T_g)提高40℃. TGA数据显示接枝后的聚合物的5%热失重温度提高40~50℃, 证明其发生交联反应. 结果表明, 新型含萘可交联聚芳醚酮具有热固性树脂的耐溶剂和耐高温特性, 进一步拓宽了聚芳醚酮的应用前景.     

Control of helix sense by composition of chiral-achiral copolymers of N-propargylbenzamides

N-Propargylbenzamides 1-7 were polymerized with (nbd)Rh(+)[eta(6)-C(6)H(5)B(-)(C(6)H(5))(3)] to afford polymers with moderate molecular weights (M(n) = 26,000-51,000) in good yields. The (1)H NMR spectra demonstrated that the polymers have fairly stereoregular structures (81-88 % cis). The optically active polymers, poly(1) and poly(2), were proven by their intense CD signals and large optical rotations to adopt a stable helical conformation with an excess of one-handed screw sense when heated in CHCl(3) or toluene. The sign of Cotton effect could be controlled by varying the content in the copolymers of either chiral bulky 1 and achiral nonbulky 3, or chiral nonbulky 2 and achiral bulky 7. The smaller the pendant group in the copolymerization of achiral monomers with 1, the more easily did the preferential helical sense change with the copolymer composition. However, the copolymers of chiral nonbulky 2 and achiral nonbulky 3 did not change the helical sense, irrespective of the composition. The free energy differences between the plus and minus helical states, as well as the excess free energy of the helix reversal, of those chiral-achiral random copolymers were estimated by applying a modified Ising model.     

IR laser ablative and conventional decomposition of poly(vinyl phenyl ketone): Different processes and different products

Pulsed IR laser ablation of poly(vinyl phenyl ketone) results in the formation of CO, C₁-C₄ hydrocarbons, benzene, styrene and phenylacetylene and affords deposition of polymeric films that were examined by EDX-SEM, FTIR, UV and NMR spectroscopies and gel-permeation chromatography. It is revealed that the structure of the films is affected by laser fluence and their M_w distribution is almost identical to that of poly(vinyl phenyl ketone). The formation of the products is accounted for by cleavages of both polymer backbone and pendant group. Conventional heating of poly(vinyl phenyl ketone) yields CO, formaldehyde, methanol and benzene as major volatile products and affords a solid fraction showing substantial fragmentation of the polymer. The different degradation products from both processes are ascribed to different modes of heating and to the wall effect.     

Helical arrays of pendant fullerenes on optically active poly(phenylacetylene)s

Novel, optically active, stereoregular poly(phenylacetylene)s bearing the bulky fullerene as the pendant were synthesized by copolymerization of an achiral phenylacetylene bearing a [60]fullerene unit with optically active phenylacetylene components in the presence of a rhodium catalyst. The C60-bound phenylacetylene was prepared by treatment of C60 with N-(4-ethynylbenzyl)glycine in a Prato reaction. The obtained copolymers exhibited induced circular dichroism (ICD) in solution both in the main-chain region and in the achiral fullerene chromophoric region, although their ICD intensities were highly dependent on the structures of the optically active phenylacetylenes and the solution temperature. These results indicate that the optically active copolymers form one-handed helical structures and that the pendant achiral fullerene groups are arranged in helical arrays with a predominant screw sense along the polymer backbone. The structures and morphology of the copolymers on solid substrates were also investigated by atomic force microscopy.     

Incorporation of different conjugated linkers into low band gap polymers based on 5,6‐Bis(octyloxy)‐2,1,3 benzooxadiazole for tuning optoelectronic properties

Four new 2,1,3‐benzooxadiazole‐based donor–acceptor conjugated polymers, namely poly{9‐(9‐heptadecanyl)‐9H‐carbazole‐alt‐5,6‐bis(octyloxy)‐4,7‐di(selenophen‐2‐yl)benzo[c][1,2,5]oxadiazole)}(PSBSC), poly{9‐(9‐heptadecanyl)‐9H‐carbazole‐alt‐5,6‐bis(octyloxy)‐4,7‐di(furan‐2‐yl)benzo[c][1,2,5]oxadiazole)}(PFBFC), poly{9,9‐dioctyl‐9H‐fluorene‐alt‐5,6‐bis(octyloxy)‐4,7‐di(selenophen‐2‐yl)benzo[c][1,2,5]oxadiazole)}(PSBSFL), and poly{9,9‐dioctyl‐9H‐fluorene‐alt‐5,6‐bis(octyloxy)‐4,7‐di(furan‐2‐yl)benzo[c][1,2,5]oxadiazole)}(PFBFFL), were synthesized via Stille polycondensation reaction. All polymers were found to be soluble in common organic solvents such as chloroform, tetrahydrofuran, and chlorobenzene. Their structures were verified by ¹H‐NMR and the molecular weights were determined by gel permeation chromatography (GPC). The polymer films exhibited broad absorption bands. Among all polymers, photovoltaic cells based on the device structure of ITO/PEDOT:PSS/PSBSC:PC₇₁BM(1:3, w/w)/LiF/Al revealed an open‐circuit voltage of 0.62 V, a short circuit current of 7.63 mA cm^?2 and a power conversion efficiency of 1.89%. This work demonstrates a good example for tuning absorption range, energy level, and photovoltaic properties of the polymers with different spacers and donor units can offer a simple and effective method to improve the efficiency of PSCs. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2459–2467     

Synthesis and self‐catalyzed phase transfer reaction of novel methacrylate polymers

Ethyl α‐chloromethylacrylate was converted to an ester derivative using 5‐chlorovaleric acid in a single step. The homopolymerization of the new monomer (CEMA) and its copolymerization with methyl methacrylate were performed using photoinitiator Irgacure 651. The polymers were reacted with N,N‐dimethyldodecylamine to obtain polymers with pendant quaternary ammonium (QA) moieties. The polymers with pendant QA groups were used in self‐catalyzed phase transfer reactions with sodium phenoxide and 1‐dodecanethiol. The syntheses of the monomer and polymers were followed by FTIR, ¹H NMR, and ¹³C NMR. The average polymer molecular weights and polydispersities were determined by size exclusion chromatography. Thermal analysis was carried out using thermogravimetric analysis and differential scanning calorimetry. The copolymer composition, degree of quaternization, and degree of conversion in phase transfer reaction were determined by ¹H NMR. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5844–5854, 2005     

Using the new in–in method for the synthesis of polyisoprene/polystyrene heteroarm star polymers

The basis of the two‐step in–in method is as follows: star polymers with poly(divinyl benzene) cores, synthesized by the arm‐first method, include many unreacted double bonds in their core, and these double bonds can be attacked by the carbanions of some monomers such as styrene and dienes. In this work, linear polyisoprene chains were used to attack the double bonds existing in the poly(divinyl benzene) cores of polystyrene star polymers, so that a heteroarm star polymer with polystyrene and polyisoprene arms was synthesized. It was later well characterized with size exclusion chromatography, light scattering, viscometry, UV spectroscopy, dynamic mechanical thermal analysis, and ¹H NMR. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 135–142, 2003     

Synthesis and properties of widely conjugated polyacetylenes having anthryl and phenanthryl pendant groups

The metathesis polymerization of 1- and 2-ethynylanthracenes (1-EA and 2-EA) and 2- and 3-ethynylphenanthrenes (2-EP and 3-EP) in the presence of various WCl₆-based catalysts produced widely conjugated soluble polymers with relatively high molecular weights. The highest weight-average molecular weights of poly(1-EA) and poly(2-EA) reached 61,000 and 26,000, respectively, when Ph₄Sn was used as cocatalyst, while those of poly(2-EP) and poly(3-EP) reached 23,000 and 65,000, respectively, with Ph₃Bi as cocatalyst. In contrast, MoCl₅-based catalysts were hardly or not effective for these monomers. A large red-shifted peak was observed centering at 570 nm (the cutoff at 750 nm) in the absorption spectrum of poly(1-EA), while the red-shifted peaks were seen around 500 nm (the cutoffs near 700 nm) in the spectra of other polymers, indicating wide conjugations of the polymer chains. The configurational structures of all the polymers confirmed by DSC and ¹H-NMR were trans structures. However, poly(1-EA) and poly(3-EP) appeared to consist partly of cis structures in their main chains. All of the present polymers showed relatively high thermal stability in air compared with poly(phenylacetylene). © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 3131–3137, 1998     

Head-to-head vinyl polymers. VI. Preparation and characterization of head-to-head poly(allyl alcohol) and its esters

Head-to-head (H–H) poly(allyl alcohol) (PAA) was prepared by the LiAlH₄ reduction of H–H poly(methyl acrylate) obtained from the methylation of alternating copolymer of ethylene with maleic anhydride. H–H poly(allyl acetate) (PAAc) and H–H poly(allyl benzoate) (PABz) were further derived by means of its acylations. All of these three H–H polymers were characterized by IR, NMR, TGA, and PGC measurements. The corresponding head-to-tail (H–T) polymers were also prepared by a similar method from the conventional H–T polymer of methyl acrylate, and characterized to allow comparison with the H–H polymers. The softening temperatures of all H–H polymers were somewhat higher than those of the respective H–T polymers, probably suggesting that the H–H placements increased the stiffness of the polymers. Unlike poly(acrylic esters) reported previously, these H–H allyl polymers were found to degrade at temperatures slightly lower than the H–T polymers. On pyrolysis at 430°C, both PAAc and PABz were also observed to release predominantly acetic acid and benzoic acid, respectively, and small quantities of the corresponding allyl ester monomers. The molar ratios of acid to ester were substantially larger for H–H polymers.     

High-resolution NMR spectra and phase equilibria in poly(phenylacetylene)-diluent mixtures

The C-13 NMR spectra of partly crystalline poly(phenylacetylene) (PPA) in CDCl₃ CCl₄ are rather well resolved and the peaks can be matched with those of 1, 3,5-triphenylbenzene. A different, less-well-resolved C-13 spectrum is characteristic of a disordered PPA obtained by heating. We conclude that crystalline PPA has the chain conformation of a cis-cis-oid helix. This interpretation is consistent with the proton NMR spectra and is supported by the fluorescence spectra, which can display two bands, one concluded to be characteristic of the cis-cis-oid conformation, the other of chain conjugation in the disordered polymer. Phase equilibria of PPA in the presence of chloroform were determined and are represented as those of the quasiternary mixture cis-cis-oid helix, disordered polymer, and chloroform.     

Asymmetric radical polymerization and copolymerization of N‐(1‐phenyldibenzosuberyl)methacrylamide and its derivative leading to optically active helical polymers

N‐(1‐Phenyldibenzosuberyl)methacrylamide (PDBSMAM) and its derivative N‐[(4‐butylphenyl)dibenzosuberyl]methacrylamide (BuPDBSMAM) were synthesized and polymerized in the presence of (+)‐ and (?)‐menthols at different temperatures. The tacticity of the polymers was estimated to be nearly 100% isotactic from the ¹H NMR spectra of polymethacrylamides derived in D₂SO₄. Poly(PDBSMAM) was not soluble in the common organic solvents, and its circular dichroism spectrum in the solid state was similar to that of the optically active poly(1‐phenyldibenzosuberyl methacrylate) (poly(PDBSMA)) with a prevailing one‐handed helicity, indicating that the poly(PDBSMAM) also has a similar helicity. Poly(BuPDBSMAM) was optically active and soluble in THF and chloroform. Its optical activity was much higher than that of the poly[N‐(triphenylmethayl)methacrylamide], suggesting that one‐handed helicity may be more efficiently induced on the poly(BuPDBSMAM). The copolymerization of BuPDBSMAM with a small amount of optically active N‐[(R)‐(+)‐1‐(1‐naphthyl)ethyl]methacrylamide, particularly in the presence of (?)‐menthol, produced a polymer with a high optical activity. The prevailing helicity may also be efficiently induced. The chiroptical properties of the obtained polymers were studied in detail. The chiral recognition by the polymers was also evaluated. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1304–1315, 2007