大孔聚甲基丙烯酸缩水甘油酯固定化酶载体的合成及性能研究

选用反应性单体甲基丙烯酸缩水甘油酯，以N,N'-亚甲基双（丙烯酰胺）为交 联剂，甲酰胺为致孔剂，用反相悬浮聚合方法制得一系列珠状共聚物载体，通过测 定其表面的物化性能、表面的环氧基浓度和固定青霉素酰化酶活性，讨论了交联剂 用量、配比及合成条件对共聚物表面性能和固定化青霉素酰化酶活性的影响。     

含环氧基亲水性固定化青霉素酰化酶共聚载体的合成与性能研究

环氧基团可以在温和条件下与酶分子的氨基反应使其固定于载体表面.选用含有活性环氧基团的甲基丙烯酸缩水甘油酯(GMA)和亲水性的N-乙烯吡咯烷酮(NVP)两种单体,以N,N′-亚甲基双丙烯酰胺(MBAA)为交联剂,甲醇水溶液作致孔剂,液体石蜡为主介质,通过反相悬浮聚合技术成功地合成了亲水性大孔GMA-NVP-MBAA三元共聚物载体(GNM).通过调节交联剂的用量和单体NVP与GMA的比例,可以调节载体的孔径、比表面积及在水中的溶胀性能.将巨大芽孢杆菌青霉素酰化酶共价偶联于平均孔径为16.5nm、表面环氧基含量为0.906mmol/g的GNM共聚物载体,制成固定化酰化酶,其表观活性高达625U/g,水解青霉素G钾盐的最适宜温度为50℃,pH值为8.0.固定化酶在4℃保存40d,活性保持不变.经3次使用后,活性达到稳定值(601U/g左右),再经12次使用,活性几乎保持不变.     

Adsorption and expression of penicillin G acylase immobilized onto methacrylate polymers generated with varying pore generating solvent volume

Adsorption and expression of penicillin G acylase was studied on macroporous methacrylate polymer beads of differing pore volume, generated with kerosene. The absorption and expression of the penicillin G acylase was dependent on pore volume. Maximum expression of 57% of adsorbed enzyme was obtained on beads synthesized with 40 mL of kerosene, indicating minimum pore-diffusion limitations.     

介孔材料的修饰及固定青霉素酰化酶的稳定性研究

利用扩孔剂的作用合成出较大孔径(12 nm)的介孔材料SBA-15, 并进行表面氨基修饰, 以此为载体, 以戊二醛为交联剂, 对青霉素酰化酶进行组装固定, 并对固定化青霉素酰化酶(PGA)的稳定性进行了深入的研究. 实验结果表明, PGA与载体交联后仍保持活性. 热稳定性研究结果表明, 制备的固定化青霉素酰化酶在低于60 ℃时保持稳定; pH在6~11范围内保持稳定; 固定化酶重复使用10次之后, 仍具有高达90%的残留活力.     

SYNTHESIS AND STRUCTURE OF MACROPOROUS MA-TMPTA COPOLYMERS AND THEIR APPLICATION IN ADSORPTION OF FLAVONOIDS FROM GINKGO LEAVES EXTRACT

1 INTRODUCTIONAdsorption by macroporous polymeric adsorbents is one of tile important methods inpurification of ginkgo leaves extract ill. Amberlite XAD-7, a macroporous polymeric adsorbentbased on methyl methacrylate - trimethylolpropane triacrylate copolymer, was reported to use inadsorptive purification of ginkgo leaves extract and other natural products containing flavonoidsfi.3]. Interaction between the adsorbent and flavonoids is based on hydrogen bonding between theester carbonyl-…     

介孔材料MCFs的合成及组装青霉素酰化酶的性质研究

介孔材料由于具有纳米级规则孔道和巨大的比表面积而在催化、吸附及分离等方面存在较大的应用价值．近年来,由介孔分子筛如MCM-41和SBA-15州等组装功能性材料已成为研究的热点．酶作为高效催化剂有许多优点,但在溶液中易失活,使用后无法回收,有的酶在溶液中还存在自水解问题：将酶组装在介孔材料中制成固定化酶则可解决上述问题．目前已成功地将辣根过氧化物酶     

Immobilized penicillin G acylase as reactor and chiral selector in liquid chromatography

In this paper, the use of penicillin G acylase (PGA) as a biocatalyst and as a chiral selector is described. Penicillin G-acylase is an interesting enzyme used in the manufacture of semisynthetic antibiotics and, in particular, in the production of 6-APA by hydrolysis of penicillin G. Five PGA-based HPLC columns have been prepared by using two different silica supports by employing two immobilization methods, namely "in situ" and "in batch". The effects of the immobilization techniques and of different silica pore size on the catalytic properties of the enzyme as well as the applicability of the PGA-bonded stationary phases as chiral selectors for a number of chiral drugs have been investigated. The HPLC columns based on immobilized PGA combine the hydrolytic activity and the chiral recognition properties of PGA, therefore they have been used for the development of a combined reaction-separation system for chiral and achiral substrates.     

Di-functional magnetic nanoflowers: A highly efficient support for immobilizing penicillin G acylase

The novel di-functional magnetic nanoflowers (DMNF) which had both epoxy groups and hydrophilic catechol as well as phthaloquinone groups capable of covalently coupling of penicillin G acylase (PGA) were characterized by scanning electron microscopy, transmission electron microscope (TEM), vibrating sample magnetometer, N₂ adsorption, and so on. The studies showed that DMNF possessed “hierarchical petal” structure of nanosheets had specific saturation magnetization of 39.7 emu/g and average pore diameter of 25.4 nm as well as specific surface area of 17.28 m²/g. For hydrolysis of penicillin G potassium catalyzed by the PGA immobilized on DMNF with enzyme loading of 106 mg/g-support, its apparent activity reached 2,667 U/g, which benefited from the “hierarchical petal” and large pore structure of the magnetic DMNF leading to high enzyme loading and fast diffusion of substrate molecules to the immobilized PGA to reaction. The apparent activity of the immobilized PGA could keep 2,408 U/g (above 90% of its initial activity) after repeating use for 10 cycles. The magnetic immobilized PGA exhibited excellent operational stability due to covalently coupling of the enzyme molecules between the support by covalent interaction of the amino groups of PGA and the reactive groups of epoxy, catechol, and phthaloquinone groups on DMNF. Furthermore, the PGA displayed good acid and alkaline resistance as well as thermal stability by immobilization using DMNF.     

大孔高交联苯乙烯-双烯-A共聚物的合成及孔结构的研究

利用新型交联剂──双甲基丙烯酰氧苯基丙烷(双烯-A)与苯乙烯悬浮共聚合,以甲苯、异戊醇作致孔剂,合成了一系列大孔高交联共聚物。考察了双烯-A用量、甲苯/异戊醇配比、引发剂用量及分散剂用量对共聚物孔结构的影响,通过红外光谱、表现密度、全自动物理吸附仪及扫描电镜对干燥的共聚物小球进行了表征。结果表明,随交联利双烯-A含量的增加,苯乙烯-双烯-A共聚物的表面孔结构明显增大。共聚物的比表面积、孔容及孔径均随致孔剂中不良溶剂异戊醇含量的增加而明显增大。     

乙烯基Ia3d介孔硅分子筛的环氧化及其固定化青霉素酰化酶(英文)

采用直接共聚法合成表面含有乙烯基的具有立方相Ia3d结构的介孔硅分子筛(V-ClMS),然后对乙烯基团进行环氧化制备得到表面环氧基功能化的介孔硅分子筛(E-CIMS),采用X射线衍射、N2吸附-脱附、透射电镜、热重分析和13C固体核磁共振对制备的介孔硅分子筛进行了表征.结果表明,表面含有乙烯基的V-ClMS介孔硅分子筛能被一步成功合成,并易于发生环氧化而获得表面环氧基功能化的E-CIMS介孔硅分子筛.将E-CIMS介孔硅分子筛作为载体用于固定化青霉素G酰化酶(PGA),研究了表面环氧基团对固定化PGA初活性和操作稳定性的影响.结果表明,随着表面环氧基团数量的增加,介孔硅分子筛孔径减小,表面疏水性增加,导致载酶量和初活性减小.但介孔硅分子筛表面适量的环氧基团能增强E-CIMS介孔硅分子筛与PGA之间的相互作用,从而提高固定化PGA的操作稳定性.     

Immobilization of whole-cell penicillin g acylase by entrapping within polymethacrylamide beads

Escherichia coli ATCC 11105 containing the periplasmic penicillin G acylase was entrapped within a copolymer of methacrylamide andN,N’- methylenebisacrylamide. A solution of monomer that was made up from methacrylamide andN,N’-methylenebisacrylamide dissolved in buffer was mixed with lyophilized cells and ammonium persulfate. This suspension was then pumped drop by drop into in soybean oil supplemented with 0.06% (v/v) 3-(dimethylamino)-propionitril. During submerging in the oil phase, the droplets were hardened and induced to polymerize within the droplets. Particles with a volume ranging from 0.013–0.017 mL per bead containing a biomass concentration up to 38.0 g/L were prepared. The optimal condition for the deacylation of penicillin G to 6-aminopencillanic acid (6-APA) catalyzed by the immobilized whole-cell penicillin G acylase was found to be 45‡C and pH 8.0. Product inhibition of this enzyme by 6-APA could be eliminated by controlling pH value at 8 during the course of penicillin G hydrolysis using a pH-stat. Conversion determined by the pH-stat method were 0.3% higher than that by p-dimethylaminobenzaldehyde method. Cell concentration in the matrix was found to be an important factor influencing the maximum velocity and the specific activity retained in the matrix. A kinetic model, in which the mass transfer resistances as a result of external film mass transfer and pore diffusion were assumed to be negligible, could properly describe the hydrolysis of penicillin G by the cells entrapped within the polymethacylamide beads.     

亲水性含环氧基磁性聚合物微球的制备与性能表征

选择甲酰胺作磁性Fe3O4微晶的分散剂,通过设计反相悬浮聚合体系,合成了粒径分布窄、球状亲水性含环氧基磁性聚合物(MGM).利用扫描电子显微镜(SEM)、红外光谱(FT-IR)、X射线粉末衍射仪(XRD)、振动样品磁强计(VSM)和低温N2吸附以及化学分析方法对聚合物进行了性能表征.结果表明,合成的MGM呈球形,且粒度分布较窄,粒径为0.13~0.28 mm的粒子占91%;甲酰胺分散Fe3O4,微晶表面的亲水性进一步增强,单体甲基丙烯酸缩水甘油酯和N,N′-亚甲基双丙烯酰胺交联共聚生成的胶粒能够包埋Fe3O4微晶形成胶核,胶核聚集形成均匀、稳定的MGM微球.MGM中Fe3O4含量为6.17%时,比饱和磁化强度σs达6.5 emu/g;其比表面积、平均孔径和孔容分别为117.6 m2/g,15.6 nm和0.46 cm3/g,表面环氧基团含量为0.53 mmol/g.MGM借助自身的活性环氧基团在十分温和的条件下共价偶联青霉素酰化酶(penicillin G acylase EC 3.5.1.11,简称PGA),制备的固定化酶在37℃下催化水解青霉素G钾生成6-氨基青霉烷酸(6-APA)的表观活性达502IU/g,并且在使用过程中没有出现磁聚集现象.     

环氧基功能化SBA-15介孔分子筛的制备、表征及其固定化青霉素酰化酶

利用表面嫁接法和乙烯基环氧化法制备了环氧基团功能化介孔分子筛G-SBA-15和O-SBA-15,并对其结构和表面性质进行了表征.结果表明,G-SBA-15和O-SBA-15均具有良好的长程有序结构,二者环氧基团的含量分别为0.78 mmol/g和0.37 mmol/g,在O-SBA-15表面还存在一定数量的乙烯基基团.G-SBA-15和O-SBA-15用于固定青霉素酰化酶(pen ic illin G acylase,PGA),固定化酶PGA/G-SBA-15和PGA/O-SBA-15在37℃时水解青霉素G钾制备6-氨基青霉烷酸(6-APA)的表观活性分别为1075 IU/g和1761 IU/g.PGA/G-SBA-15经4次使用后表观活性趋于稳定,经10次使用后保持其初始活性的83.7%.PGA/O-SBA-15在重复使用中,表观活性出现持续衰减,10次使用后保持其初始活性的51.6%,PGA/G-SBA-15的操作稳定性明显好于PGA/O-SBA-15.     

不同介孔材料固定青霉素酰化酶的稳定性研究

介孔材料由于具有在2～30nm之间可调的纳米级规则孔道、大比表面积和强吸附性能而成为固定化酶的优良载体．将酶固定于介孔材料的孔道中制备成的固定化酶与溶液酶相比,有易于与产物分离,并可回收和反复使用,可降低生产成本,减少酶的自水解和保持酶的活性．青霉素酰化酶（Penicillin acylase,PGA,EC．3．5．1．11）又称为青霉素酰胺酶或青霉素氨基水解酶,该酶属于球蛋白,分子量较大,由2个亚基组成：分子量为19500的含有侧链结合位点的亚基和分子量为60000的含有催化位点的亚基．     

Study of different media for production of penicillin G acylase from Bacillus megaterium ATCC 14945

Applied Biochemistry and Biotechnology - In this study, several fermentation media were tested for the production of penicillin G acylase (PGA) using Bacillus megaterium. The carbon sources studied...     

Recent progress in the development of immobilized penicillin G acylase for chemical and industrial applications: A mini‐review

Immobilized penicillin G acylase (PGA) as an important industrial catalyst can catalyze penicillin G potassium (PG) to 6‐aminopenicillanic acid (6‐APA). 6‐APA is an important intermediate for semisynthetic penicillin drugs, which occupies a huge market space in the anti‐inflammatory field; as a result, immobilized PGA occupies a huge market space in the pharmaceutical field. However, at present, there are different degrees of defects in the preparation and production process of immobilized PGAs on the market because of the huge demand; therefore, the performance of immobilized PGA and its productivity will bring huge economic benefits to enterprises. Therefore, research on immobilized PGA has always been a focus. This review first introduces the source, classification, structure, and catalytic mechanism of PGA and then studies the development of immobilization methods, immobilized carriers, reaction media, enzyme activity regeneration, and reactors of immobilized PGA in recent years.     

Radiation-induced polymerization for the immobilization of penicillin acylase

The immobilization ofEscherichia coli penicillin acylase (EC 3.5.1.11) was investigated by radiation-induced polymerization of 2-hydroxyethyl methacrylate at low temperature. A leak-proof composite that does not swell in water was obtained by adding the crosslinking agent trimethylolpropane trimethacrylate to the monomer-aqueous enzyme mixture. Penicillin acylase, which was immobilized with greater than 70% yield, possessed a higherK _m value toward the substrate 6-nitro-3-phenylacetamidobenzoic acid than the free enzyme form (K _m = 1.7 × 10⁻⁵ and 1 × 10⁻⁵M, respectively). The structural stability of immobilized penicillin acylase, as assessed by heat, guanidinium chloride, and pH denaturation profiles, was very similar to that of the free-enzyme form, thus suggesting that penicillin acylase was entrapped in its native state into aqueous free spaces of the polymer matrix.     

Efficient continuous kinetic resolution of racemic 2-aminobutanol over immobilized penicillin G acylase

In this paper, an efficient method was established for continuous kinetic resolution of racemic 2-aminobutanol by selective hydrolysis of N-phenylacetyl (±)-2-aminobutanol over immobilized penicillin G acylase (PGA) in a fixed-bed reactor. Several N-acylated derivatives of 2-aminobutanol were screened in batch experiments, and it was found that the hydrolysis of N-phenylacetyl (±)-2-aminobutanol proceeded smoothly in the presence of immobilized penicillin G acylase with satisfied enantioselectivity. Thus, the reaction parameters were optimized in a fixed-bed reactor. Under the optimized conditions, 39.3% conversion of N-phenylacetyl (±)-2-aminobutanol and 98.2% ee value of S-2-aminobutanol were obtained. This fixed-bed system was operated continuously for 40 h without significant decrease of enzyme activity. It has been demonstrated to be more efficient compared to the batch experiments.     

含环氧基团的聚合物载体合成方法的改进及其固定化青霉素酰化酶

 以 Span-60 和 Tween-20 为复合分散剂, 以 N,N′-亚甲基双丙烯酰胺为交联剂, 以甲基丙烯酸缩水甘油酯和烯丙基缩水甘油醚为功能性单体, 用反相悬浮聚合技术成功制备了含环氧基团的聚合物载体, 并用红外光谱和低温氮吸附对聚合物载体进行了表征. 以 Span-60 和 Tween-20 为复合分散剂, 替代原有的 Span-60 和硬脂酸钙复合分散剂, 大幅度减少了后处理过程中所需的时间和溶剂用量, 使固定化青霉素酰化酶的活性从 215 U/g 提高到 320 U/g. 与游离酶相比, 该固定化酶具有较好的操作稳定性, 在 pH = 5~11 和不高于 50 oC 的环境中具有较好的稳定性. 固定化酶的水解反应动力学过程与游离酶相同, 均遵循米氏反应动力学, 而且活性与底物浓度密切相关. 当底物浓度为 6.5% 时, 固定化酶的活性最高, 达到 353 U/g.     

Bioengineering functional copolymers. III. Synthesis of biocompatible poly[(N‐isopropylacrylamide‐co‐maleic anhydride)‐g‐poly(ethylene oxide)]/poly(ethylene imine) macrocomplexes and their thermostabilization effect on the activity of the enzyme penicillin G acylase

Stimuli‐responsive poly[(N‐isopropylacrylamide‐co‐maleic anhydride)‐g‐poly(ethylene oxide)]/poly(ethylene imine) macrobranched macrocomplexes were synthesized by (1) the radical copolymerization of N‐isopropylacrylamide and maleic anhydride with α,α′‐azobisisobutyronitrile as an initiator in 1,4‐dioxane at 65 °C under a nitrogen atmosphere, (2) the polyesterification (grafting) of prepared poly(N‐isopropylacrylamide‐co‐maleic anhydride) containing less than 20 mol % anhydride units with α‐hydroxy‐ω‐methoxy‐poly(ethylene oxide)s having different number‐average molecular weights (M_n = 4000, 10,000, or 20,000), and (3) the incorporation of macrobranched copolymers with poly(ethylene imine) (M_n = 60,000). The composition and structure of the synthesized copolymer systems were determined by Fourier transform infrared, ¹H and ¹³C NMR spectroscopy, and chemical and elemental analyses. The important properties of the copolymer systems (e.g., the viscosity, thermal and pH sensitivities, and lower critical solution temperature behavior) changed with increases in the molecular weight, composition, and length of the macrobranched hydrophobic domains. These copolymers with reactive anhydride and carboxylic groups were used for the stabilization of penicillin G acylase (PGA). The conjugation of the enzyme with the copolymers significantly increased the thermal stability of PGA (three times at 45 °C and two times at 65 °C). © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1580–1593, 2003