Simple Lanthanide Amides [(Me3Si)2N]3Ln(μ-Cl)Li(THF)3 as Highly Efficient Catalysts for the Nitroaldol Reaction

This contribution is to report the application of simple lanthanide amides [(Me3Si)2N]3Ln(μ-Cl)Li(THF)3 exhibiting a high activity toward catalyzing Henry reaction of aromatic aldehydes with nitroalkanes to give β-nitroalcohols or β-nitroolefins with a very good chemoselectivity by controlling the reaction temperatures and by selecting aromatic aldehydes. It was found that this catalytic system was compatible with a wide range of substrates of aldehydes.     

Lanthanide Amide-catalyzed Aza-Henry Reaction of N-Tosyl Imines with Nitroalkanes

In the presence of 10 mol% lanthanide amide [(Me₃Si)₂N]₃Ln(µ‐Cl)Li(THF)₃, the aza‐Henry reaction of N‐tosyl imines with nitroalkanes (1:5 molar ratio) could be performed in good yields. The lanthanide amide‐catalyzed aza‐Henry reaction has the features of mild reaction conditions, tolerance of a variety of aromatic aldehyde‐derived imines and nitroalkanes, short time and good chemical yields. A catalytic mechanism for the reaction was also proposed.     

Michael-Addition Reaction of Malononitrile with α,β-Unsaturated Cycloketones Catalyzed by KF／Al2O3

A series of KF/Al2O3 catalyzed Michael-addition reactions between malononitrile and α,β-unsaturated cycloketones in DMF solution were studied. At room temperature, 2-cyano-3-aryl-3-(1,2,3,4-tetrahydronaphthalen-1-one-2-yl) propionitrile derivatives were synthesized by the reaction between 2-arylmethylidene-1,2,3,4-tetra-hydronaphthalen-1-one and malononitrile. However, if the temperature was increased to 80℃, 2-amino-3-cyano-4-aryl-4H-benzo[h]chromene derivatives were obtained in high yields. When the α,β-unsaturated ketones were replaced by 2,6-biarylmethylidenecyclohexanone or 2,5-biarylmethylidenecyclopentanone, another series of 2-amino-3-cyano-4H-pyran derivatives was isolated successfully. The structures of the products were confirmed by X-ray diffraction analysis.     

New Procedure for One‐Pot Synthesis of 3,4‐Dihydropyrimidin‐2(1H)‐ones by Biginelli Reaction

A practical green chemistry procedure for synthesis of 3,4‐dihydropyrimidin‐2(1H);‐ones in good yields was successfully carried out in micellar systems according to the Biginelli reaction using β‐ketoester, urea and appropriate aromatic aldehyde in the presence of CuCl₂ · H₂O as catalyst. The advantages of this method involved the broader application scope of substrates, the more environmental friendly process and the low‐cost of the Lewis acid catalyst.     

Molecular mechanics calculations on carbonyl compounds. III. Cycloketones

Molecular mechanics (MM4) calculations were carried out on cycloketones for ring sizes ranging from 4 to 11 carbon atoms. The MM4 relative energies for the various conformations of the cycloketones were compared to density functional theory (DFT) calculations (B3LYP/6‐31G*), which were also carried out in this work. For small ring sizes (n=4–6), calculated molecular geometries, dipole moments, moments of inertia, and vibrational spectra were compared to experimental data. The axial–equatorial energy differences in methyl‐substituted cyclohexanones were also calculated by MM4 and compared to ab initio, DFT, and experimental results. The results of the MM4 studies on cycloketones showed significant improvement from those of MM3 calculations performed in parallel with the MM4 calculations. © 2001 John Wiley & Sons, Inc. J Comput Chem 22: 1451–1475, 2001     

Three‐arm star block copolymers of aromatic polyether and polystyrene from chain‐growth condensation polymerization,atom transfer radical polymerization,and click reaction

Well‐defined (AB)₃ type star block copolymer consisting of aromatic polyether arms as the A segment and polystyrene (PSt) arms as the B segment was prepared using atom transfer radical polymerization (ATRP), chain‐growth condensation polymerization (CGCP), and click reaction. ATRP of styrene was carried out in the presence of 2,4,6‐tris(bromomethyl)mesitylene as a trifunctional initiator, and then the terminal bromines of the polymer were transformed to azide groups with NaN₃. The azide groups were converted to 4‐fluorobenzophenone moieties as CGCP initiator units by click reaction. However, when CGCP was attempted, a small amount of unreacted initiator units remained. Therefore, the azide‐terminated PSt was then used for click reaction with alkyne‐terminated aromatic polyether, obtained by CGCP with an initiator bearing an acetylene unit. Excess alkyne‐terminated aromatic polyether was removed from the crude product by means of preparative high performance liquid chromatography (HPLC) to yield the (AB)₃ type star block copolymer (M_n = 9910, M_w/M_n = 1.10). This star block copolymer, which contains aromatic polyether segments with low solubility in the shell unit, exhibited lower solubility than A₂B or AB₂ type miktoarm star copolymers. In addition, the obtained star block copolymer self‐assembled to form spherical aggregates in solution and plate‐like structures in film. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and Properties of Novel Poly（amine ether）s

Using aromatic bis（4-bromophenyl） ether and various aromatic diamines as the monomers, a series of novel poly（amine ether）s （PAEs） have been synthesized via palladium-catalyzed aryl amination, which is the Hartwig-Buchwald polycondensation reaction. Their structures were characterized by means of elemental analysis, FT-IR, 1^H NMR and UV-Vis spectroscopy. The results show a good agreement with the proposed structures. Their general properties were studied by DSC and TG and it＇s obvious that they show high glass transition temperatures （Tg〉200 ℃）, good thermal stability with high decomposition temperatures （TD〉500℃） and excellent solubility. The mechanical behavior of these polymers suggested that they could be considered a new class of high-performance polymers.     

Synthesis of hyperbranched poly(ether nitrile)s by one‐step polycondensation of an AB2 monomer

Hyperbranched poly(ether nitrile)s were prepared from a novel AB₂ type monomer, 2‐chloro‐4‐(3,5‐dihydroxyphenoxy)benzonitrile, via nucleophilic aromatic substitution. Soluble and low‐viscous hyperbranched polymers with molecular weights upto 233,600 (M_w) were isolated. According to the ¹H NMR and GPC data, the unique polymerization behavior was observed, which implies that the weight average molecular weight increased after the number average molecular weight reached plateau region. Model compounds were prepared to characterize the branching structure. Spectroscopic measurements of the model compounds and the resulting polymers, such as ¹H, DEPT ¹³C NMR, and MS, strongly suggest that the ether exchange reaction and cyclization are involved in the propagation reaction. The side reactions would affect the unique polymerization behavior. The resulting polymers showed a good solubility in organic solvents similar to other hyperbranched aromatic polymers. The hydroxy‐terminated polymer was even soluble in basic water. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5835–5844, 2009     

An Efficient One-pot Synthesis of β-Amino/β-Acetamido Carbonyl Compounds via ZrCl4-catalyzed Mannich-type Reaction

Zirconium(IV) chloride catalyzed efficient one-pot synthesis of β-amino/β-acetamido carbonyl compounds at room temperature is described. In the presence of ZrCl4, the three-component Mannich-type reaction via a variety of in situ generated aldimines, with various ketones, aromatic aldehydes and aromatic amines in ethanol, led to the formation of β-amino carbonyl compounds and the four-component Mannich-type reaction of aromatic aldehydes with various ketones, acetonitrile and acetyl chloride resulted in the corresponding β-acetamido carbonyl compounds in high to excellent yields. This methodology has also been applied towards the synthesis of dimeric β-amino/β-acetamido carbonyl compounds.     

Synthesis of aromatic polyethersulfone‐based graft copolyacrylates via ATRP catalyzed by FeCl2/isophthalic acid

The atom transfer radical polymerization (ATRP) catalyzed by the FeCl₂/isophthalic acid system was used for the preparation of novel aromatic polyethersulfone (PSF)‐based graft copolymers in N,N‐dimethylformamide (DMF), such as aromatic PSF‐graft‐poly(methyl methacrylate), aromatic PSF‐graft‐polymethylacrylate, and aromatic PSF‐graft‐poly(butyl acrylate). The route consisted of two steps. The first step included the chloromethylation of aromatic PSF, and the second step involved the ATRP of acrylate monomers using chloromethylated aromatic PSF as the macroinitiator and FeCl₂/isophthalic acid as the catalyst in DMF. Characterization data by gel permeation chromatography, DSC, IR, ¹H NMR, and thermogravimetric analysis confirmed that the graft copolymerization was successful. Only one glass‐transition temperature (T_g) was observed for aromatic PSF‐graft‐poly(methyl methacrylate), and two T_g's were detected for aromatic PSF‐graft‐methyl acrylate and aromatic PSF‐graft‐poly(butyl acrylate). © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2943–2950, 2001     

Mn‐[4‐Chlorophenyl‐Salicylaldimine‐Methylpyranopyrazole]Cl2 as a Novel Nanostructured Schiff Base Complex and Catalyst

Mn‐[4‐chlorophenyl‐salicylaldimine‐methylpyranopyrazole]Cl₂ ([Mn‐4CSMP ]Cl₂) as nano‐Schiff base complex was prepared and fully characterized by Fourier transform infrared spectroscopy, X‐ray diffraction, thermal gravimetric analysis, derivative thermogravimetry, scanning electron microscopy, energy‐dispersive X‐ray analysis, and UV–vis spectroscopy. The reactivity of nano‐[Mn‐4CSMP ]Cl₂ as a catalyst was tested on the tandem cyclocondensation–Knoevenagel condensation–Michael reaction between phenylhydrazine and ethyl acetoacetate with various aromatic aldehydes to give 4,4′‐(arylmethylene)‐bis‐(3‐methyl‐1‐phenyl‐1H ‐pyrazol‐5‐ol)s derivatives.     

One-pot Synthesis of 1,8-Dioxo-decahydroacridine Derivatives in Aqueous Media

A new and efficient method for the synthesis of 1,8‐dioxo‐9‐aryl‐decahydroacridine derivatives was developed via a one‐pot three component reaction of dimedone, aromatic aldehydes and ammonium acetate in the presence of ammonium chloride, or Zn(OAc)₂·2H₂O or L‐proline separately in water in the short period of time and high yields.     

Ionic Liqids in Organic Synthesis: The Pummerer Reaction

Pummerer‐type reaction was carried out with α‐acyl sulfides and phenyliodine(III) bis(trifluoroacetate) (PIFA) instead of α‐acyl sulfoxides in the room temperature ionic liquid 1‐n‐butyl‐3‐methylimidazolium hexafluorophosphate [bmim][PF₆] under mild conditions to give the ene adducts 3 in good yields.     

Rhodium‐catalyzed ortho‐C‐H olefination of aromatic aldehydes employing transient directing strategy

A Rhodium(III)‐catalyzed ortho‐C‐H olefination of aromatic aldehydes in the presence of catalytic amount of TsNH₂ has been developed. The in situ generated imine intermediate from aldehyde and TsNH₂ worked as a transient directing group. Both electron‐rich and electron‐deficient aromatic aldehydes were tolerated, affording the corresponding products in moderate to good yields. Importantly, the present protocol provides a straightforward access to olefinated aromatic aldehydes with aldehydes as the simple starting materials.     

Polyimides from an asymmetric hydroxyl‐containing aliphatic‐aromatic diamine synthesized via henry reaction

An aliphatic amino and an aliphatic hydroxyl group have been incorporated via Henry reaction highly efficiently toward the synthesis of a novel asymmetric aliphatic–aromatic diamine 2‐amino‐1‐[4‐(5‐aminopyridyloxy)phenyl]‐1‐ethanol (AAP_yP_hE) in three steps. AAP_yP_hE shows good copolymerization reactivity with 4,4′‐oxydianiline (ODA) toward different aromatic dianhydrides, especially 4,4′‐oxydiphthalic anhydride (ODPA). TGA measurement and mechanical test results show that all polymers maintain the inherent thermal performance and tensile properties, while the glass transition temperatures (T_g's) by DMA show moderate decrease ranging from 185.5 to 253.3 °C due to the presence of aliphatic segments. The introduction of AAP_yP_hE is found to improve the solubility of the polymers, and the polymer films' optical transparency with decreased cutoff wavelength (λ₀) ranging from 328 to 370 nm. Comparative studies reveal that the pendent aliphatic hydroxyls in the polymer chains would lead to interchain cross‐linking via condensation and secondary weak cross‐linking by hydrogen bond depending on different loading of AAP_yP_hE, which result in a fluctuation of hydrophilic–hydrophobic properties, DMA tan δ and dielectric constant of the copolymer films. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3413–3423     

Studies on Mechanochemistry: Solid Coordination Compounds from Primary Aromatic Amines and Cobalt(II) Chloride Hexahydrate

Cobalt(II) chloride hexahydrate and primary aromatic amines were reacted by co‐grinding in 1:2 metal salt to ligand ratio under solvent‐free environment at room temperature. Out of 16 solid state reactions, seven cobalt‐amine complexes could be established as solid coordination compounds by elemental analysis, TGA, IR, PXRD, magnetic susceptibility etc., in addition to visual observation of the color change of reaction mixture. Based on investigation of reaction and analysis of products, conclusions with outlook could be made as follows: On top of the —NH₂ group on primary aromatic amines an additional substituent group should better be at para or meta positions and not at ortho position in order to realize the solid coordination compounds. On the other hand, an electron withdrawing substituent or an extra aromatic ring is negative towards formation of the solid coordination compounds. The solid coordination Co(II)‐compounds are labile in solution.     

A solution‐processible poly(p‐phenylene vinylene) without alkyl substitution: Introducing the cis‐vinylene segments in polymer chain for improved solubility,blue emission,and high efficiency

A soluble all‐aromatic poly(2,5‐diphenyl‐1,4‐phenylenevinylene) (2,5‐DP‐PPV) is synthesized by utilizing aromatic phosphonium and aldehyde monomers through Wittig reaction. The H¹ NMR and FTIR measurements indicate that over 50% content of cis‐vinylene units exist in polymer backbone. The diphenyl‐substituted benzaldehyde monomer plays an important role to enhance cis‐products (Z‐selectivity) in Wittig reactions. The twisted cis‐segments in polymer backbone reduce the interchain interactions and enhance the solubility of such all‐aromatic PPV derivative in common organic solvents. 2,5‐DP‐PPV exhibits good solubility in common organic solvents, such as tetrahydrofuran and chloroform. The polymer film exhibits a blue light emission (λ_max = 485 nm) and a very high photoluminescence efficiency of 78%. The cis‐trans photo isomerization of this polymer in solution and the impact on the optical properties are also investigated. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5242–5250, 2008     

Asymmetric Conjugate Addition of Unmodified Cyclic Ketones to Nitroolefins Using Aminophosphonate as the Organocatalyst

本文设计合成了光学纯吡咯烷基磷酸酯,并成功地应用于酮类底物与b-硝基芳基乙烯衍生物的不对称催化Michael加成反应中。在20 mol %催化剂用量下,以10 mol %三氟乙酸作为添加物,无溶剂条件下,0 oC反应7-24小时,Michael加成产物的收率最高达96%,非对映选择性最高可达97:3,ee值最高可达90%。     

Diastereoselective Synthesis of Functionalized Tetrahydropyrimidin‐2‐thiones via ZnCl2 Promoted One‐pot Reactions

In the presence of zinc chloride, the in situ generated β‐enamino ester from the reaction of morpholine, piperidine and pyrrolidine with methyl propiolate reacted, with aromatic aldehydes and thiourea in ethanol resulting in the functionalized tetrahydropyrimidin‐2‐thiones in satisfactory yields and with good diastereoselectivity. When aromatic aldehydes bearing electron‐withdrawing group were used in the reaction, the 4‐hydroxytetrahydropyrimidin‐2‐thione derivatives were obtained as the main product.     

Modular amino acid amide chiral ligands for enantioselective addition of diethylzinc to aromatic aldehydes

Enantioselective addition of diethylzinc to a series of aromatic aldehydes was developed using a modular amino acid amide chiral ligand (2S)‐3‐phenyl‐N‐((R)‐1‐phenyl‐ethyl)‐2‐(tosylamino)propanamide without using titanium complex. The catalytic system employing 10 mol% of 1g was found to promote the addition of diethylzinc (ZnEt₂) to a wide range of aromatic aldehydes with electron‐donating and electron‐withdrawing substituents, giving up to 82% ee of the corresponding secondary alcohol under mild conditions. Copyright © 2011 John Wiley & Sons, Ltd.