超亲水TiO2和TiO2-SiO2表面的动态润湿性

1997年, Fujishima研究组[1]发现TiO2表面经UV光照射能产生较强的亲水性, 同时具有较高的亲油性, 即经UV光照射后的TiO2表面具有超双亲的性质. 这种防雾和自清洁性在工业上应用广泛, 已引起了人们的极大兴趣[2～5]. 进一步的研究发现, 超亲水的TiO2表面在暗处放置会变为疏水表面. 对于这个问题, 除了可以通过UV光照[6]、氩离子或电子束溅射[6]和高温热处理[5]等恢复其超亲水性外, 还可以通过添加摩尔分数为10%～30%的SiO2有效地降低TiO2表面的接触角, 提高UV光诱导的超亲水表面在暗处的稳定性能[3]. 另外, 诱导TiO2的亲水性需要较强的UV线强度(如太阳光), 使它在室内应用受到限制. 为了在室内实现TiO2的自清洁功能, Watanabe等[4]发现在TiO2中添加WO3可使TiO2在室内的照明光下也能实现亲水性转变. 以上这些研究成果为TiO2在工业和生活上的实际应用提供了重要的科学依据. 然而, TiO2的防雾和自清洁功能的实现同时也受其动力学性质的制约.     

Preparation and solar-light photocatalytic activity of TiO2 composites: TiO2/kaolin,TiO2/diatomite,and TiO2/zeolite

Three TiO₂ loaded composites, TiO₂/kaolin, TiO₂/diatomite, and TiO₂/zeolite, were prepared in order to improve the solar-light photocatalytic activity of TiO₂. The results showed that the photocatalytic activity could obviously be enhanced by loading appropriate amount of inorganic mineral materials. Meanwhile, TiO₂ content, heat-treatment temperature and heat-treatment time on the photocatalytic activity were reviewed. Otherwise, the effect of solar light irradiation time and dye concentration on the photocatalytic degradation of Acid Red B was investigated. Furthermore, the degradation mechanism and adsorption process were also discussed.     

Photocatalytic reduction of nitrate over TiO2 and Ag-modified TiO2

This research work presents the efficiency of the TiO₂ and Ag–TiO₂ thin films prepared by the sol–gel method and coated onto the surface of 304 stainless steel sheets used in the photocatalytic nitrate reduction processes. The Ag–TiO₂ thin films had the weight by weight (w/w) ratio of Ag⁺/TiO₂ of 0.1% as Ag atom. The XRD results showed that the crystalline phase structure of TiO₂ on the Ag–TiO₂ thin films was anatase. The optical band gaps of the TiO₂ and 0.1% Ag–TiO₂ thin films were respectively 3.27 and 2.70 eV, while the surface of the prepared catalysts was hydrophobic with the respective average water contact angles of 94.8° and 118.5° for the TiO₂ and 0.1% Ag–TiO₂ thin films. The net efficiencies of photocatalytic nitrate reduction of TiO₂ and 0.1% Ag–TiO₂ were 41.4% and 70.0%, respectively. The loading of Ag only influenced the nitrate removal efficiency without affecting the stoichiometric ratio of formate to nitrate. The net stoichiometric ratio of formate to nitrate of all experiments was 2.8:1.0, which is close to the stoichiometric ratio of 2.5:1.0 of the nitrate reduction to nitrite and then to nitrogen gas.     

Yellow pigments based on Fe2TiO5 and TiO2

The aim of our research was to prepare yellow pigments based on structure of pseudobrookite Fe₂TiO₅. Part of Fe was substituted with Li and Ti from Fe₂TiO₅ to Li_0.05Fe_0.07Ti_2.44O₅. Synthesis and pigmentary-application properties in the Li₂O–Fe₂O₃–TiO₂ system were studied for 800 and 900°C using classical ceramic method of preparation. The main attention was aimed to usage of four different sources of titanium compounds as raw materials. We studied the influence of different sources of titanium compounds on the structural and the colour properties of the prepared pigments. The thermal analysis was used for characterization of titanium compounds and determination of their thermal stability.     

STS study of TiO2 film and Pt-deposited TiO2 film in air

Direct investigation of the electronic structure of catalyst surfaces on the near-atomic scale in general has not been impossible in the past. However, with the advent of the scanning tunneling microscope (STM), the opportunity arises for incorporating the scanning tunneling spectroscopy (STS) for correlation in-situ surface electronic structure with topography on a sub-nanometer scale. In this paper, we report the STS results of thin film TiO2 and Pt-deposited TiO2 annealed at 450℃. It was found that the TiO2 semiconductor changes from n-type to p-type after Pt deposition.Fig. 1 shows the surface electronic property (Ⅰ-Ⅴ curve) of thin TiO2 film measured in air by STS. A steep descent of the anodic tunneling current at ca.- 1.0 Ⅴ and a rapid ascent of cathodic tunneling current at ca. +2.0V. The zero bias represents the Fermi level (Ef). Ef is situated at the Ecb side indicating that the thin TiO2 film possesses the same band gap as that of bulk TiO2 phase ( Egs =3.0 to 3.2 eV). For the sample of Pt-deposited TiO2 film, Pt/(Pt+Ti+O) atomic ratio≈0.2, which indicates that the surface of TiO2 film is partly covered by Pt particles, and there are two types of Ⅰ-Ⅴ curves to be detected. One of them (Fig.2a)is attributed to the electronic property of TiO2, which has same Egs as that shown in Fig. 1. However, the Ef is transferred to valence side (△≈1eV). This phenomenon hints that TiO2 is doped by an impurity which can introduce h+ into TiO2 lattice.Such a type of defects may be described by Ti1-xPtxO2(h )2x, here Pt+2 as a substitutional site of Ti+4. Fig.2b is the Ⅰ-Ⅴ curve of a Pt particle situated on a TiO2 particle contained Ti1-xPtxO2(h )2x.     

Structure of TiO2 in TiO2-SiO2 prepared by a complexing agent-assisted sol-gel procedure

Many types of TiO₂-SiO₂ (Ti:Si=50:50 mol%) were prepared by the sol-gel procedure with and without 2-methyl-2, 4-pentanediol (MPD) as an organic ligand. The effect of MPD on the gel structure and the properties of the TiO₂ crystals were studied by XRD and raman spectroscopy, and the effect of the sol standing time on the properties of the TiO₂ crystals were also studied by XRD spectroscopy. In the gels with MPD, anatase of TiO₂ appeared at approximately 580°C, and the crystal structures were similar despite the difference in the gel preparation procedure. The titania gels with MPD were presumed to be dispersed in the silica gel matrix without any Ti-O-Si bond. In the presence of MPD, the formation of titania gels is controlled and the specified TiO₂ crystal is produced.     

Fibrous TiO2-SiO2 nanocomposite photocatalyst

The electrospinning method is employed to prepare a fibrous TiO2-SiO2 (Ti : Si = 1 : 2) nanocomposite photocatalyst, in which Degussa P25 T i O2 nanoparticles are embedded inthe body of SiO2 fibers and which shows good photocatalytic activity due to its 3-D open structure, as evidenced by photocatalytic reduction of silver ions and decomposition of acetaldehyde.     

Fabrication of TiO2 Grating with Composites of Azobenzene Polymer and TiO2 Nanoparticles

We have used the formation of surface relief gratings (SRG) on azobenzene polymers to manipulate TiO₂ nanoparticles and to fabricate TiO₂ nanoparticle gratings. Suspensions of an azobenzene polymer (PDO3) and TiO₂ were used to spin coat thin films on glass slide substrates. By interfering coherent light from an Argon laser on the surface of the PDO3‐TiO₂ composite films, SRGs were fabricated. Atomic force microscopic images of the SRGs show TiO₂ nanoparticles dispersed throughout the sample, and in particular, at the peaks of the SRG after oxygen plasma treatment. The lateral forces acting on the azobenzene polymer during the SRG fabrication drag the TiO₂ nanoparticles. These results indicated that it is feasible to create TiO₂ nanoparticle gratings with the composites.     

TiO2微图纹结构的制作

The representative soft lithographic techniques are used,which are micromolding and microtransfer molding methods to fabricate the micro array patterned titanium dioxide on glass substrates. Firstly titanium dioxide sol was synthesized by sol-gel method using tetrabutyl titanate as the precursor,then the pre-patterned poly（dimethylsiloxane） elastomeric stamp was used to mold the TiO2 sol on glass substrate by micromolding and microtransfer molding methods,micro patterned TiO2 sol was gelled at 70℃ with 0. 5 N pressure applied on the PDMS stamp,further heat treatment of TiO2 gel by annealing at 550℃ for 2 h produced the TiO2 microstructure. The TiO2 microstructure was observed by the optical microscope and the optical micrographs demonstrated the satisfactory yield and fidelity of pattern transfer by micromolding method and microtransfer method. The effect of gel temperature,the pressure applied on the PDMS stamp and the silicone mold on the fidelity and yield of TiO2 microstructure are discussed.     

Photocatalytic reduction of CO2 with H2O on TiO2 and Cu/TiO2 catalysts

Photoinduced reduction of CO₂ by H₂O to produce CH₄ and CH₃OH has been investigated on wellcharacterized standard TiO₂ catalysts and on a Cu²⁺ loaded TiO₂ catalyst. The efficiency of this photoreaction depends strongly on the kind of catalyst and the ratio of H₂O to CO₂. Anatase TiO₂, which has a large band gap and numerous surface OH groups, shows high efficiency for photocatalytic CH₄ formation. Photogenerated Ti³⁺ ions, H and CH₃ radicals are observed as reactive intermediates, by ESR at 77 K. Cu-loading of the small, powdered TiO₂ catalyst (Cu/TiO₂) brings about additional formation of CH₃OH. XPS studies suggest that Cu⁺ plays a significant role in CH₃OH formation.     

Photocatalytic decomposition of gaseous acetone using TiO2 and Pt/TiO2 catalysts

Metallic platinum was photodeposited on TiO₂ particles, and morphological characteristics of the Pt/TiO₂ catalyst were determined. The dispersion of metallic platinum was uniform and did not alter the morphology of the TiO₂ particles. However, absorbance of the Pt/TiO₂ catalyst for light with wavelength more than 400 nm was significantly improved by the addition of metallic platinum. Gaseous acetone was decomposed in an annular photoreactor coated with TiO₂ or Pt/TiO₂ catalysts using a UV or a fluorescent lamp as light source. The decomposition of acetone with the application of a UV lamp was obviously enhanced for experiments conducted with Pt/TiO₂ catalyst. Decomposition of acetone was promoted considerably with increasing oxygen concentration for experiments conducted with oxygen less than 50,000 ppmv, yet the decomposition of acetone was kept relatively constant for experiments conducted with oxygen above 50,000 ppmv. On the basis of the mass balance for carbon species, the amount of organic intermediates formed for experiments conducted under various conditions was found to be minimal. © 2008 Wiley Periodicals, Inc. Int J Chem Kinet 40: 209–216, 2008     

在TiO2上CO的光催化氧化

最近在“氧化的”TiO₂(即表面无氧空位和Ti³⁺)上进行的CO光催化氧化研究发现:室温下,以黑光灯(峰值λ=365nm)光照时,“氧化的”TiO₂无CO催化氧化的活性,但以杀菌灯(峰值λ=253.7nm)光照时,则对CO产生显著的催化活性.参照CO在过渡金属表面的催化氧化机理,对本现象进行了解释:黑光灯照时,O₂在TiO₂表面只生成O_2(a)^-,而O_2(a)^-不能使CO氧化,只有以杀菌灯照时,TiO₂表面产生O_(a)^-,CO氧化反应才能发生.     

Sol-Gel Derived TiO2-SiO2 Fibres

TiO₂−SiO₂ fibres with 0, 5, 10 and 20 volume % SiO₂ have been prepared by drawing from a gel followed by sintering at different temperatures. Nearly one meter long fibres can be drawn easily in conditions of about 50% relative humidity. Addition of SiO₂ inhibits the crystallisation of TiO₂ and also the anatase → rutile transformation and improves the strength of the fibres. While the pure TiO₂ fibres are brittle, those with 5, 10 and 20 volume % SiO₂ are flexible and strong. Tensile strength values as high as 3 GPa have been achieved in the 10 volume % SiO₂−TiO₂ fibres. Fibres heated above 900°C are brittle. The shape of the cross section of the fibres is found to depend on their diameters.     

Crystallization of TiO2 xerogel

Journal of Thermal Analysis and Calorimetry - For utilization of TiO2 in advanced applications, TiO2 after thermal treatment has to be in crystalline phase of anatase, because it gives the desired...     

Self-crystallized Interlayer Integrating Polysulfide-adsorbed TiO2/TiO and Highly-electron-conductive TiO for High-stability Lithium-Sulfur Batteries

Low-cost lithium sulfur(Li-S)batteries afford preeminent prospect as a next-generation high-energy storage device by virtue of great theoretical capacity.Nevertheless,their applications are restricted by some challenging technical barriers,such as weak cycling stability and low poor-conductivity sulfur loading originated in notorious shuttling effect of polysulfide intermediates.Herein,free of any complicated compositing process,we design an interlayer of carbon fiber paper supported TiO2/TiO to impede the shuttle effect and enhance the electrical conductivity via physical isolation and chemical adsorption.Such a self-crystallized homogeneous interlayer,where TiO2/TiO enables absorbing lithium polysulfides(LiPSs)and TiO plays a key role of high-electron-conductivity exhibited ultrahigh capacities(1000 mA·h/g at 0.5 C and 900 mA·h/g at 1 C)and outstanding capacity retention rate(97%)after 100 cycles.Thus,our design provides a simple route to suppress the shuttle effect via self-derived evolution Li-S batteries.