聚二烯丙基二甲基氯化铵在质子交换膜表面静电自组装过程的热力学研究

本文通过热化学方法设计了PDDA滴定质子交换膜,并研究了高分子的静电自组装过程。通过非线性拟合数据分析,求出了自组装过程的焓变（ ）和结合常数（K）。根据该反应过程中的热力学参数,可知自组装过程是“焓驱动”反应。热量的放出代表着能量的降低,有利于反应的发生;而自由度的减小不利于反应的发生。对于每个离子键的形成,单分子DDA的焓变超过了PDDA,这是因为小分子能够更加自由地结合到膜上,而高分子PDDA有一定的位阻效应。     

Self‐Assembled Asymmetric Block Copolymer Membranes: Bridging the Gap from Ultra‐ to Nanofiltration

The self‐assembly of block copolymers is an emerging strategy to produce isoporous ultrafiltration membranes. However, thus far, it has not been possible to bridge the gap from ultra‐ to nanofiltration and decrease the pore size of self‐assembled block copolymer membranes to below 5 nm without post‐treatment. It is now reported that the self‐assembly of blends of two chemically interacting copolymers can lead to highly porous membranes with pore diameters as small as 1.5 nm. The membrane containing an ultraporous, 60 nm thin separation layer can fully reject solutes with molecular weights of 600 g mol^?1 in aqueous solutions with a water flux that is more than one order of magnitude higher than the permeance of commercial nanofiltration membranes. Simulations of the membrane formation process by dissipative particle dynamics (DPD) were used to explain the dramatic observed pore size reduction combined with an increase in water flux.     

A Signal‐Passing DNA‐Strand‐Exchange Mechanism for Active Self‐Assembly of DNA Nanostructures

DNA nanostructured tiles play an active role in their own self‐assembly in the system described herein whereby they initiate a binding event that produces a cascading assembly process. We present DNA tiles that have a simple but powerful property: they respond to a binding event at one end of the tile by passing a signal across the tile to activate a binding site at the other end. This action allows sequential, virtually irreversible self‐assembly of tiles and enables local communication during the self‐assembly process. This localized signal‐passing mechanism provides a new element of control for autonomous self‐assembly of DNA nanostructures.     

Precursor‐involved and Conversion Rate‐controlled Self‐assembly of a 'Super Gelator' in Thixotropic Hydrogels for Drug Delivery

Enzymatic hydrogelation is a totally different process to the heating‐cooling gelation process, in which the precursors of the gelators can be involved during the formation of self‐assembled structures. Using thixotropic hydrogels formed by a super gelator as our studied system, we demonstrated that the enzyme concentration/conversion rate of enzymatic reaction had a strong influence on the morphology of resulting self‐assembled nanostructures and the property of resulting hydrogels. The principle demonstrated in this study not only helps to understand and elucidate the phenomenon of self‐assembly triggered by enzymes in biological systems, but also offers a unique methodology to control the morphology of self‐assembled structures for specific applications such as controlled drug release.     

Spontaneous Formation of Giant Polymer Vesicles through a Nucleation and Growth Pathway

The non‐membrane‐closing formation of polymer vesicles was demonstrated by the self‐assembly of an amphiphilic hydrogen‐bonded interpolymer complex of HPC and PAA. A dynamic‐formation process that involved a nucleation and growth pathway was observed experimentally that was different from the theoretical predictions of both the membrane‐closing model and the nucleation and growth model. A series of intermediate states between the solid spheres and vesicles were visually captured by the addition of an inorganic salt followed by dilution.     

Surfactant‐Free Self‐Assembly of Nanocrystals into Ellipsoidal Architectures

A simple approach to control the self‐assembly of ZnS nanocrystals into well‐defined, uniform, three‐dimensional, micrometer‐scale, solid ellipsoidal structures with rattle‐type, multishelled, and hollow architectures is presented. There is no surfactant or small molecule to assist the self‐assembly of the nanocrystals. A possible mechanism of the controlled self‐assembly is proposed. The growth process can be divided into two stages: 1) the formation of ellipsoidal architectures via oriented aggregation, the growth kinetics of which is primarily attributed to the charge–charge, charge–dipole, and dipole–dipole interactions of preformed ZnS nanocrystals; and 2) Ostwald ripening, which results in multishelled, rattle‐type, and hollow structures. This self‐assembly concept is also applicable to other metal sulfides.     

Directed Self‐Assembly of DNA Tiles into Complex Nanocages

Tile‐based self‐assembly is a powerful method in DNA nanotechnology and has produced a wide range of well‐defined nanostructures. But the resulting structures are relatively simple. Increasing the structural complexity and the scope of the accessible structures is an outstanding challenge in molecular self‐assembly. A strategy to partially address this problem by introducing flexibility into assembling DNA tiles and employing directing agents to control the self‐assembly process is presented. To demonstrate this strategy, a range of DNA nanocages have been rationally designed and constructed. Many of them can not be assembled otherwise. All of the resulting structures have been thoroughly characterized by gel electrophoresis and cryogenic electron microscopy. This strategy greatly expands the scope of accessible DNA nanostructures and would facilitate technological applications such as nanoguest encapsulation, drug delivery, and nanoparticle organization.     

古紫质AR4重组的磷脂脂质体中的定向自组装

This paper reports, for the first time, that Archaerhodopsin-4 (AR4) could be reconstituted into phospholipid liposomes by self-assembly. AR4 is a new membrane protein isolated from halobacteria H.sp. xz515 in a salt lake of Tibet, China. This is a bacteriorhodopsin (bR) like protein, function as a light-driven proton pump. Experimental measurements verified that similar to bR, AR not only remains its biological activity in pmteoliposome, but also keeps a preferred orientation in self-assembly.     

Mechanism of Crystalline Self‐Assembly in Aqueous Medium: A Combined Cryo‐TEM/Kinetic Study

Understanding the crystallization of organic molecules is a long‐standing challenge. Herein, a mechanistic study on the self‐assembly of crystalline arrays in aqueous solution is presented. The crystalline arrays are assembled from perylene diimide (PDI) amphiphiles bearing a chiral N‐acetyltyrosine side group connected to the PDI aromatic core. A kinetic study of the crystallization process was performed using circular dichroism spectroscopy combined with time‐resolved cryogenic transmission electron microscopy (cryo‐TEM) imaging of key points along the reaction coordinate, and molecular dynamics simulation of the initial stages of the assembly. The study reveals a complex self‐assembly process starting from the formation of amorphous aggregates that are transformed into crystalline material through a nucleation–growth process. Activation parameters indicate the key role of desolvation along the assembly pathway. The insights from the kinetic study correlate well with the structural data from cryo‐TEM imaging. Overall, the study reveals four stages of crystalline self‐assembly: 1) collapse into amorphous aggregates; 2) nucleation as partial ordering; 3) crystal growth; and 4) fusion of smaller crystalline aggregates into large crystals. These studies indicate that the assembly process proceeds according to a two‐step crystallization model, whereby initially formed amorphous material is reorganized into an ordered system. This process follows Ostwald’s rule of stages, evolving through a series of intermediate phases prior to forming the final structure, thus providing an insight into the crystalline self‐assembly process in aqueous medium.     

Spatially Controlled Out‐of‐Equilibrium Host–Guest System under Electrochemical Control

Self‐assembly to create molecular and nanostructures is typically performed at the thermodynamic minimum. To achieve dynamic functionalities, such as adaptability, internal feedback, and self‐replication, there is a growing focus on out‐of‐equilibrium systems. This report presents the dynamic self‐assembly of an artificial host–guest system at an interface, under control by a dissipative electrochemical process using (electrical) energy, resulting in an out‐of‐equilibrium system exhibiting a supramolecular surface gradient. The gradient, its steepness, rate of formation, and complex surface composition after backfilling, as well as the surface compositions after switching between the different states of the system, are assessed and supported by modelling. Our method shows for the first time an artificial surface‐confined out‐of‐equilibrium system. The electrochemical process parameters provide not only control over the system in time, but also in space.     

Self‐assembly of polymer‐coated ferromagnetic nanoparticles into mesoscopic polymer chains

The self‐assembly of dispersed polymer‐coated ferromagnetic nanoparticles into micron‐sized one‐dimensional mesostructures at a liquid–liquid interface was reported. When polystyrene‐coated Co nanoparticles (19 nm) are driven to an oil/water interface under zero‐field conditions, long (≈ 5 μm) chain‐like assemblies spontaneously form because of dipolar associations between the ferromagnetic nanoparticles. Direct imaging of the magnetic assembly process was achieved using a recently developed platform consisting of a biphasic oil/water system in which the oil phase was flash‐cured within 1 s upon ultraviolet light exposure. The nanoparticle assemblies embedded in the crosslinked phase were then imaged using atomic force microscopy. The effects of time, temperature, and colloid concentration on the self‐assembly process of dipolar nanoparticles were then investigated. Variation of either assembly time t or temperature T was found to be an interchangeable effect in the 1D organization process. Because of the dependence of chain length on the assembly conditions, we observed striking similarities between 1D nanoparticle self‐assembly and polymerization of small molecule monomers. This is the first in‐depth study of the parameters affecting the self‐assembly of dispersed, dipolar nanoparticles into extended mesostructures in the absence of a magnetic field. © 2008 Wiley Periodicals, Inc.* J Polym Sci Part B: Polym Phys 46: 2267–2277, 2008     

Narcissistic Self‐Sorting in Self‐Assembled Cages of Rare Earth Metals and Rigid Ligands

Highly selective, narcissistic self‐sorting can be achieved in the formation of self‐assembled cages of rare earth metals with multianionic salicylhydrazone ligands. The assembly process is highly sensitive to the length of the ligand and the coordination geometry. Most surprisingly, high‐fidelity sorting is possible between ligands of identical coordination angle and geometry, differing only in a single functional group on the ligand core, which is not involved in the coordination. Supramolecular effects allow discrimination between pendant functions as similar as carbonyl or methylene groups in a complex assembly process.     

Bending Nanofibers into Nanospirals: Coordination Chemistry as a Tool for Shaping Hydrophobic Assemblies

In the current work, we demonstrate how coordination chemistry can be employed to direct self‐assembly based on strong hydrophobic interactions. To investigate the influence of coordination sphere geometry on aqueous self‐assembly, we synthesized complexes of the amphiphilic perylene diimide terpyridine ligand with the first‐row transition‐metal centers (zinc, cobalt, and nickel). In aqueous medium, aggregation of these complexes is induced by hydrophobic interactions between the ligands. However, the final shapes of the resulting assemblies depend on the preferred geometry of the coordination spheres typical for the particular metal center. The self‐assembly process was characterized by UV/Vis spectroscopy, zeta potential measurements, and cryogenic transmission electron microscopy (cryo‐TEM). Coordination of zinc(II) and cobalt(II) leads to the formation of unique nanospiral assemblies, whereas complexation of nickel(II) leads to the formation of straight nanofibers. Notably, coordination bonds are utilized not as connectors between elementary building blocks, but as directing interactions, enabling control over supramolecular geometry.     

Synthesis of Linear ABC Triblock Copolymers and Their Self‐Assembly in Solution

The self‐assembly of amphiphilic block copolymers has attracted the interest of a large number of research groups in the past two decades. Many examples have been reported using AB diblock copolymers, but the self‐assembly becomes more complex and shows a greater variety if ABC triblock copolymers are used. However, the synthesis of the polymer becomes more demanding since end‐group modifications or chain extensions become necessary. Using various kinds of polymerization techniques, pure triblock copolymers have been reported and their synthesis is covered in this review. Following the synthesis, a detailed and thorough analysis of the self‐assembly behaviour is the next step. We have selected promising and well characterized examples to show the range of self‐assembled structures possible, covering novel shapes of micelles but also polymersomes with an asymmetric membrane. Our selection of current examples in literature show the challenges and chances associated with amphiphilic ABC triblock copolymers.     

Frame‐Guided Assembly of Amphiphiles

Frame‐guided assembly, a recently discovered strategy for amphiphilic assembly, is discussed as a strategy for constructing vesicle assemblies with programmed geometries and dimensions under identical surrounding conditions. The strategy is inspired by the cytoskeletal‐membrane protein–lipid bilayer structure and shows great potential in the understanding and controlling of the amphiphilic assembly process. Both the principles and basic requirements are discussed, along with recently reported examples. The prospects and potential investigations of frame‐guided assembly are also proposed.     

Self‐Assembly of Hierarchical Nanostructures from Dopamine and Polyoxometalate for Oral Drug Delivery

The preparation of 3D hierarchical nanostructures by a simple and versatile strategy of self‐assembly of dopamine (DA) and phosphotungstic acid (PTA) is described. The size and morphology of the hierarchical nanostructures could be simply controlled by varying the ratio of the two components, their concentrations, and the pH of the initial Tris‐HCl solution. The self‐assembly of the flowerlike microspheres has been found to involve a two‐stage growth process. Moreover, use of the hierarchical nanostructures as a possible carrier for an anticancer drug in chemotherapy has been explored. The nanostructures showed an intriguing pH‐dependent release behavior, making them promising for applications in biomedical science.     

A Case Study of the Likes and Dislikes of DNA and RNA in Self‐Assembly

Programmed self‐assembly of nucleic acids (DNA and RNA) is an active research area as it promises a general approach for nanoconstruction. Whereas DNA self‐assembly has been extensively studied, RNA self‐assembly lags much behind. One strategy to boost RNA self‐assembly is to adapt the methods of DNA self‐assembly for RNA self‐assembly because of the chemical and structural similarities of DNA and RNA. However, these two types of molecules are still significantly different. To enable the rational design of RNA self‐assembly, a thorough examination of their likes and dislikes in programmed self‐assembly is needed. The current work begins to address this task. It was found that similar, two‐stranded motifs of RNA and DNA lead to similar, but clearly different nanostructures.     

Enantiomerically Pure [M6L12] or [M12L24] Polyhedra from Flexible Bis(Pyridine) Ligands

Coordination‐driven self‐assembly is one of the most powerful strategies to prepare nanometer‐sized discrete (supra)molecular assemblies. Herein, we report on the use of two constitutionally isomeric BINOL‐based bis(pyridine) ligands for this purpose. Upon coordination to Pd^II ions these self‐assemble into enantiomerically pure endo‐ and exo‐functionalized hexa‐ and dodecanuclear metallosupramolecular spheres with a chiral skeleton depending on the substitution pattern of the BINOL core. These aggregates were characterized by NMR, MS, DLS, TEM, and EELS as well as ECD. Furthermore, experimental ECD data could be compared to those obtained from theoretical simulations using a simplified Tamm–Dancoff approximation to time‐dependent DFT to rationalize the extraordinary high molar circular dichroisms. Despite the rotational freedom around the central aryl–aryl bond of these ligands, the self‐assembly process happens completely selective in a “narcissistic” self‐recognition manner.     

First Successful Post‐Synthetic Self‐Assembly of Polyaniline with Poly(N‐vinylpyrrolidone) into Aqueous Nanocolloids

Summary: Polyaniline (PANI) is successfully self‐assembled with poly(N‐vinylpyrrolidone) (PVP) into aqueous nanocolloids. The typical morphology of the colloids is studied by atomic force microscopy (AFM), which reveals spherical nanoparticles with a diameter of 80–150 nm. A possible mechanism for such a post‐synthetic self‐assembly process is proposed.

AFM micrograph of PANI aqueous nanocolloids stabilized by PVP via a novel post‐synthetic self‐assembly method.     

Hierarchical Supramolecular Spinning of Nanofibers in a Microfluidic Channel: Tuning Nanostructures at a Dynamic Interface

One of the fundamental problems in supramolecular chemistry, as well as in material sciences, is how to control the self‐assembly of polymers on the nanometer scale and how to spontaneously organize them towards the macroscopic scale. To overcome this problem, inspired by the self‐assembly systems in nature, which feature the dynamically controlled self‐assembly of biopolymers, we have previously proposed a self‐assembly system that uses a dynamic liquid/liquid interface with dimensions in the micrometer regime, thereby allowing polymers to self‐assemble under precisely controlled nonequilibrium conditions. Herein, we further extend this system to the creation of hierarchical self‐assembled architectures of polysaccharides. A natural polysaccharide, β‐1,3‐glucan (SPG), and water were injected into opposite “legs” of microfluidic devices that had a Y‐shape junction, so that two solvents would gradually mix in the down stem, thereby causing SPG to spontaneously self‐assemble along the flow in a head‐to‐tail fashion, mainly through hydrophobic interactions. In the initial stage, several SPG nanofibers would self‐assemble at the Y‐junction owing to the shearing force, thereby creating oligomers with a three‐way junction point. This unique structure, which could not be created through conventional mixing procedures, has a divergent self‐assembly capability. The dynamic flow allows the oligomers to interact continuously with SPG nanofibers that are fed into the Y‐junction, thus amplifying the nanostructure along the flow to form SPG networks. Consequently, we were able to create stable, centimeter‐length macroscopic polysaccharide strands under the selected flow conditions, which implies that SPG nanofibers were assembled hierarchically in a supramolecular fashion in the dynamic flow. Microscopic observations, including SEM and AFM analysis, revealed the existence of clear hierarchical structures inside the obtained strand. The network structures self‐assembled to form sub‐micrometer‐sized fibers. The long fibers further entangled with each other to give stable micrometer‐sized fibers, which finally assembled to form the macroscopic strands, in which the final stabilities in the macroscopic regime were governed by that of the network structures in the nanometer regime. Thus, we have exploited this new supramolecular system to create hierarchical polymeric architectures under precisely controlled flow conditions, by combining the conventional supramolecular strategy with microfluidic science.