Frame‐Guided Assembly of Vesicles with Programmed Geometry and Dimensions

In molecular self‐assembly molecules form organized structures or patterns. The control of the self‐assembly process is an important and challenging topic. Inspired by the cytoskeletal‐membrane protein lipid bilayer system that determines the shape of eukaryotic cells, we developed a frame‐guided assembly process as a general strategy to prepare heterovesicles with programmed geometry and dimensions. This method offers greater control over self‐assembly which may benefit the understanding of the formation mechanism as well as the functions of the cell membrane.     

Thio‐Bromo “Click” Reaction Derived Polymer–Peptide Conjugates for Their Self‐Assembled Fibrillar Nanostructures

The synthesis and self‐assembly of peptide–polymer conjugates into fibrillar nanostructures are reported, based on the amyloidogenic peptide KLVFF. A strategy for rational synthesis of polymer–peptide conjugates is documented via tethering of the amyloidogenic peptide segment LVFF (Aβ_17‐20) and its modified derivative FFFF to the hydrophilic poly(ethylene glycol) monomethyl ether (mPEG) polymer via thio‐bromo based “click” chemistry. The resultant conjugates mPEG‐LVFF‐OMe and mPEG‐FFFF‐OMe are purified via preparative gel permeation chromatography technique (with a yield of 61% and 64%, respectively), and are successfully characterized via combination of spectroscopic and chromatographic methods, including electrospray ionization time‐of‐flight mass spectrometry. The peptide‐guided self‐assembling behavior of the as‐constructed amphiphilic supramolecular materials is further investigated via transmission electron microscopic and circular dichroism spectroscopic analysis, exhibiting fibrillar nanostructure formation in binary aqueous solution mixture.     

Fabrication of Chiral Materials via Self‐Assembly and Biomineralization of Peptides

With different scales of chirality, chiral materials have various particular properties and potential applications in many fields. Peptides are the fundamental building units of biological systems, and a variety of ordered functional nanostructures are produced through self‐assembly and biomineralization of peptides in nature. This Personal Account describes chiral silica materials fabricated by using amphiphilic peptides as building blocks. Three particular biomineralization approaches are described based on different kinds of geometry of amphiphilic peptides: the influence of the specific amino acid proline in the peptide sequence, the hydrophilicity of amphiphilic peptides, and different kinds of hydrophobic tails in amphiphilic peptides. These strategies are useful for designing peptides toward the bottom‐up synthesis of nanomaterials as well as improving the understanding of the mechanism of peptide self‐assembly.     

Synthesis of amphiphilic homopolymers and their self‐assembly into acid‐responsive polymeric micelles

This contribution presents a strategy for preparing amphiphilic homopolymers as building blocks for self‐assembly into supramolecular nanostructures. The synthesis begins with norbornene monomers containing oligoethylene glycols on the side chains. Ring‐opening metathesis polymerization of the monomers and subsequent dihydroxylation afford water‐soluble dihydroxylated poly(norbornene)s (PNBs). Amphiphilic modifications of the hydrophilic PNBs can be achieved by reacting 1,2‐diols on the backbones with hydrophobic dodecanals to form acetal linkages. The self‐assembly of the resulting amphiphilic PNB homopolymers affords polymeric micelles whose morphologies can be tuned by breaking the acetal linkages under acidic conditions. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3804–3808     

Facile Preparation of Polymeric Dimers from Amphiphilic Patchy Particles

A straightforward strategy for assembling polymeric dimers from amphiphilic nanoparticles is reported. Amphiphilic polymeric nanoparticles with a mixed‐shell of PEO/P2VN blocks and a flexible core of PAA blocks are fabricated by a non‐covalent crosslinking method. Uniform polymeric dimers are efficiently and simply obtained via hydrophobic interactions under optimized conditions in selective solvent. The steric hindrance generated by reorganization of hydrophilic polymer brushes during the interparticle association is critical for morphological selectivity in the assembly. General applicability offers the possibility to organize functional NPs into superstructures with well‐defined geometry and association numbers.     

Synthesis and self‐assembly of polyhydroxylated and electropolymerizable block copolymers

A facile synthetic strategy for preparing hydroxylated polymethacrylate amphiphilic block copolymers (PCzMMA‐b‐PBMMA, PFlMMA‐b‐PBMMA) incorporated with primary and secondary hydroxyl groups and electroactive moieties along the polymer backbone is reported. Full characterization, structure‐property relationship and self‐assembly of these polymers are discussed. Due to interplay of hydrophobic/hydrophilic interactions, PCzMMA‐b‐PBMMA formed a layered lattice and PFlMMA‐b‐PBMMA showed a vesicular morphology. Electropolymerization of the electroactive units led to the formation of cross‐conjugated polymer network in solution and in thin films. The network structure was characterized with a range of spectroscopic techniques. Such highly processable polymers may be of interest to applications in which a conducting amphiphilic films with strong adhesion to various substrates are required. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2217–2227     

Poly(2‐oxazoline)s: A Polymer Class with Numerous Potential Applications

The living cationic ring‐opening polymerization of 2‐oxazolines has been studied in great detail since its discovery in 1966. The versatility of this living polymerization method allows copolymerization of a variety of 2‐oxazoline monomers to give a range of tunable polymer properties that enable, for example, hydrophilic, hydrophobic, fluorophilic, as well as hard and soft materials to be obtained. However, this class of polymers was almost forgotten in the 1980s and 1990s because of their long reaction times and limited application possibilities. In the new millennium, a revival of poly(2‐oxazoline)s has arisen because of their potential use as biomaterials and thermoresponsive materials, as well as the easy access to defined amphiphilic structures for (hierarchical) self‐assembly. Recent developments that illustrate the potential of poly(2‐oxazoline)s are discussed in this Review. In addition, the promising combination of poly(2‐oxazoline)s and click chemistry is illustrated.     

Thermally Triggered Frame‐Guided Assembly

We report a thermally triggered frame‐guided assembly (FGA) strategy for the preparation of vesicles. We employ thermally responsive poly(propylene oxide) (PPO) to make the leading hydrophobic groups (LHGs) thermally responsive, so that they are hydrophilic below the low critical solution temperature (LCST) and the frame forms in a homogeneous environment. When the temperature is increased above the LCST, the LHGs become hydrophobic and the assembly process is triggered, which drives DNA‐b‐PPO to assemble around the LHGs, forming vesicles. This work verified that FGA is a general strategy and can be applied to polymeric systems. The thermally triggered assembly not only provides more controllability over the FGA process but also promotes an in‐depth understanding of the FGA strategy and in a broad view, the formation mechanism and functions of cell membrane.     

Self‐Assembly of Amphiphilic Block Copolymer‐Tethered Nanoparticles: a New Approach to Nanoscale Design of Functional Materials

Colloidal molecules constructed from polymers and nanoparticles (NPs) have recently emerged as a novel class of building blocks for assembling functional hybrid materials. Particularly, self‐assembly of amphiphilic block copolymer (BCP)‐tethered NPs (BNPs) has shown great promise in the nanoscale design of functional hybrid materials. On the one hand, structurally the BNPs can be considered as molecular equivalents that are capable of self‐assembly at multiple hierarchical levels. On the other hand, the assembly of BNPs shows significant differences from molecular assembly due to their large dimension, complex geometry, and multi‐scale interactions involved in the assembly process. The manipulation of BCPs localized near the surface of the NPs offers an effective tool for engineering the interactions between NPs and hence the complexity of NP assembly. In this Feature Article, recent progresses on the self‐assembly of BNPs into functional materials are summarized. First, major strategies for assembling amphiphilic BNPs are highlighted. Secondly, the application of hybrid nanostructures (e.g., vesicles) assembled from BNPs in the field of biomedical imaging and delivery is discussed. Finally, current challenges and perspectives at this frontier are outlined.

     

Synthesis of Linear ABC Triblock Copolymers and Their Self‐Assembly in Solution

The self‐assembly of amphiphilic block copolymers has attracted the interest of a large number of research groups in the past two decades. Many examples have been reported using AB diblock copolymers, but the self‐assembly becomes more complex and shows a greater variety if ABC triblock copolymers are used. However, the synthesis of the polymer becomes more demanding since end‐group modifications or chain extensions become necessary. Using various kinds of polymerization techniques, pure triblock copolymers have been reported and their synthesis is covered in this review. Following the synthesis, a detailed and thorough analysis of the self‐assembly behaviour is the next step. We have selected promising and well characterized examples to show the range of self‐assembled structures possible, covering novel shapes of micelles but also polymersomes with an asymmetric membrane. Our selection of current examples in literature show the challenges and chances associated with amphiphilic ABC triblock copolymers.     

Flow‐Guided Assembly Processes

This Concept article focuses on capillary, hydrodynamics and electrokinetic flow‐guided assembly processes that can produce patterned or gradient functional surfaces either on solid surfaces or in deep micro‐ and nanoscale channels. This concept has the potential to produce low‐cost nanostructures, internal surface modifications, and devices in nanomedicine.     

Recrystallization‐Induced Self‐Assembly for the Growth of Cu2O Superstructures

The assembly of inorganic nanoparticles (NPs) into 3D superstructures with defined morphologies is of particular interest. A novel strategy that is based on recrystallization‐induced self‐assembly (RISA) for the construction of 3D Cu₂O superstructures and employs Cu₂O mesoporous spheres with diameters of approximately 300 nm as the building blocks has now been developed. Balancing the hydrolysis and recrystallization rates of the CuCl precursors through precisely adjusting the experimental parameters was key to success. Furthermore, the geometry of the superstructures can be tuned to obtain either cubes or tetrahedra and was shown to be dependent on the growth behavior of bulk CuCl. The overall strategy extends the applicability of recrystallization‐based processes for the guided construction of assemblies and offers unique insights for assembling larger particles into complicated 3D superstructures.     

Dual‐Mode Controlled Self‐Assembly of TiO2 Nanoparticles Through a Cucurbit[8]uril‐Enhanced Radical Cation Dimerization Interaction

The realization of controllable multicomponent self‐assembly through reversible supramolecular interactions is a challenging goal, and is an important strategy for the fabrication of switchable nanomaterials. Herein we show that the self‐assembly of TiO₂ nanoparticles (NP) functionalized with methyl viologen can be controlled both by light irradiation and chemical reduction through cucurbit[8]uril‐enhanced radical cation dimerization interactions. Moreover, the controlled assembly and disassembly of this system are accompanied by switchable photocatalytic activity of the TiO₂ NPs, which shows potential application as a novel smart and recyclable photocatalyst.     

Pillararene‐Based Assemblies: Design Principle,Preparation and Applications

In this review, we highlight recent advancements on pillararene‐based assemblies. The driving forces for the formation of the pillararene‐based assemblies are discussed first. The host–guest interactions are deemed as not only general strategy for constructing assemblies but also essential components for preventing the assemblies from the dissociation. Solvent effect is also important in the assembling process, since it could influence the host–guest interactions and provide solvophobic effect on pillararenes for the assembly. Then, several pillararene‐based assembly architectures are introduced, including pillararene‐based interlocked structures, such as (poly)pseudorotaxanes, (poly)rotaxanes, and daisy chains, classified by their topological structures and synthetic strategy. The morphologies of the supramolecular assemblies are divided into several types, for example, nanospheres, nanotubes and supramolecular polymers. Furthermore, the functions and potential applications are summarized accompanied with related assembly structures. The review not only provides fundamental findings, but also foresights future research directions in the research area of pillararene‐based assemblies.     

Recent advances in the solution self‐assembly of amphiphilic “rod‐coil” copolymers

Solution self‐assembly of amphiphilic “rod‐coil” copolymers, especially linear block copolymers and graft copolymers (also referred to as polymer brushes), has attracted considerable interest, as replacing one of the blocks of a coil‐coil copolymer with a rigid segment results in distinct self‐assembly features compared with those of the coil‐coil copolymer. The unique interplay between microphase separation of the rod and coil blocks with great geometric disparities can lead to the formation of unusual morphologies that are distinctly different from those known for coil‐coil copolymers. This review presents the recent achievements in the controlled self‐assembly of rod‐coil linear block copolymers and graft copolymers in solution, focusing on copolymer systems containing conjugated polymers, liquid crystalline polymers, polypeptides, and polyisocyanates as the rod segments. The discussions concentrate on the principle of controlling over the morphology of rod‐coil copolymer assemblies, as well as their distinctive optical and optoelectronic properties or biocompatibility and stimuli‐responsiveness, which afford the assemblies great potential as functional materials particularly for optical, optoelectronic and biological applications. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1459–1477     

Bending Nanofibers into Nanospirals: Coordination Chemistry as a Tool for Shaping Hydrophobic Assemblies

In the current work, we demonstrate how coordination chemistry can be employed to direct self‐assembly based on strong hydrophobic interactions. To investigate the influence of coordination sphere geometry on aqueous self‐assembly, we synthesized complexes of the amphiphilic perylene diimide terpyridine ligand with the first‐row transition‐metal centers (zinc, cobalt, and nickel). In aqueous medium, aggregation of these complexes is induced by hydrophobic interactions between the ligands. However, the final shapes of the resulting assemblies depend on the preferred geometry of the coordination spheres typical for the particular metal center. The self‐assembly process was characterized by UV/Vis spectroscopy, zeta potential measurements, and cryogenic transmission electron microscopy (cryo‐TEM). Coordination of zinc(II) and cobalt(II) leads to the formation of unique nanospiral assemblies, whereas complexation of nickel(II) leads to the formation of straight nanofibers. Notably, coordination bonds are utilized not as connectors between elementary building blocks, but as directing interactions, enabling control over supramolecular geometry.     

Functionalized Membranes for Photocatalytic Hydrogen Production

Functionalized vesicles for photocatalytic hydrogen production in water have been prepared by co‐embedding of amphiphilic photosensitizers and a hydrogen‐evolving catalyst in phospholipid membranes. The self‐assembly allows a simple two‐dimensional arrangement of the multicomponent system with close spatial proximity, which gave turnover numbers up to 165 for the incorporated amphiphilic cobaloxime water reduction catalyst 3 b under optimized conditions in purely aqueous solution. Superior photocatalytic activity in fluid membranes indicates that mobility and dynamic reorganization of catalytic subunits in the membrane promote the visible‐light‐driven hydrogen production. The functionalized membranes represent nanostructured assemblies for hydrogen production in aqueous solution mimicking natural photosynthesis.     

The Two‐Step Assemblies of Basic‐Amino‐Acid‐Rich Peptide with a Highly Charged Polyoxometalate

Two‐step assembly of a peptide from HPV16 L1 with a highly charged europium‐substituted polyoxometalate (POM) cluster, accompanying a great luminescence enhancement of the inorganic polyanions, is reported. The mechanism is discussed in detail by analyzing the thermodynamic parameters from isothermal titration calorimetry (ITC), time‐resolved fluorescent and NMR spectra. By comparing the actions of the peptide analogues, a binding process and model are proposed accordingly. The driving forces in each binding step are clarified, and the initial POM aggregation, basic‐sequence and hydrophobic C termini of peptide are revealed to contribute essentially to the two‐step assembly. The present study demonstrates both a meaningful preparation for bioinorganic materials and a strategy using POMs to modulate the assembly of peptides and even proteins, which could be extended to other proteins and/or viruses by using peptides and POMs with similar properties.     

NIR‐II Fluorescent Self‐Assembled Peptide Nanochain for Ultrasensitive Detection of Peritoneal Metastasis

Fluorescence‐guided cytoreductive surgery is one of the most promising approaches for facile elimination of tumors in situ, thereby improving prognosis. Reported herein is a simple strategy to construct a novel chainlike NIR‐II nanoprobe (APP‐Ag₂S‐RGD) by self‐assembly of an amphiphilic peptide (APP) into a nanochain with subsequent chemical crosslinking of NIR‐II Ag₂S QDs and the tumor‐targeting RGD peptide. This probe exhibits higher capability for cancer cell detection compared with that of RGD‐functionalized Ag₂S QDs (Ag₂S‐RGD) at the same concentration. Upon intraperitoneal injection, superior tumor‐to‐normal tissue signal ratio is achieved and non‐vascularized tiny tumor metastatic foci as small as about 0.2 mm in diameter could be facilely eliminated under NIR‐II fluorescent imaging guidance. These results clearly indicate the potential of this probe for fluorescence‐guided tumor staging, preoperative diagnosis, and intraoperative navigation.     

Synthesis and self‐assembly behavior of amphiphilic polypeptide‐based brush‐coil block copolymers

Synthesis and self‐assembly behavior of a novel amphiphilic brush‐coil block copolymer bearing hydrophilic poly(ethylene glycol) segment and hydrophobic polypeptide brush segment were presented in this work. The poly(γ‐benzyl‐L ‐glutamate) (PBLG) brush is synthesized through “grafting from” strategy by ring‐opening polymerization of γ‐benzyl‐L ‐glutamate‐N‐carboxyanhydride (BLG‐NCA) initiated by the flanking terminal primary amino group of macroinitiator. The copolymers were characterized by ¹H NMR, gel permeation chromatography, Fourier transform infrared, circular dichroism spectrum, and differential scanning calorimetry. The self‐assembly behavior of the brush‐coil block copolymers in aqueous solution was investigated by means of transmission electron microscopy, scanning electron microscopy, atomic force microscopy, and laser light scattering. Spherical micelles were observed when the length of PBLG brush is shorter. The aggregate morphology transforms to spindle‐like micelles and then to rod‐like micelles, as the length of polypeptide brush increases. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5967–5978, 2009