用激光衍射法研究电解气泡的大小及其分布

应用激光衍射法研究了电化学反应中析出的氢和氧气泡的大小及其分布.发现在一定电解条件下气泡的大小在较宽的范围内变化,并给出了其统计规律.电流密度和电极材料对于较少发生聚并的氢气泡的大小及分布影响较小,对发生聚并的氧气泡影响较大.当电解液由碱性变为酸性时,氢气泡显著增大,而氧气泡急剧减小,二者的分布规律也发生根本变化.     

Na3AlF6-Al2O3熔盐体系中ZnFe2O4基阳极的电化学行为

研究了ＺｎＦｅ２Ｏ４基阳极在Ｎａ３ＡｌＦ６－Ａｌ２Ｏ３熔盐体系中的电化学稳定性，讨论了电极的析氧历程并得到了析氧过电位与阳极表观电流密度之间的Ｔａｆｅｌ关系式，η＝０．１２＋０．０５２ｌｏｇｉ（ｉ＝０．０１５－０．４４Ａ／ｃｍ＾２）用三角波电位扫描法测定了电极析氧过程的伏安曲线。     

粉末多孔镍电极电化学阻抗谱及其数学模型

镍电极反应动力学在大多情况下是受固态质子扩散过程控制的，以此为出发点建立了具有明确物理意义的镍电极电阻抗谱（ＥＩＳ）的数学模型，并以该模型为基础，讨论了一些模型参数如双电层电容Ｃｄ１，质子扩散系数Ｄ及活性物质粒子半径ｒ０等改变，电极的不同荷电状态及多孔镍电极中的传质过程对镍电阻阻抗谱的影响，理论模型较好地解释了一些实验结果。     

Na_3AlF_6-Al_2O_3熔盐体系中ZnFe_2O_4基阳极的电化学行为

研究了ＺｎＦｅ２Ｏ４基阳极在Ｎａ３ＡｌＦ６－Ａｌ２Ｏ３（ｓａｔｕｒａｔｅｄ）熔盐体系中的电化学稳定性,讨论了电极的析氧历程并得到了析氧过电位与阳极表观电流密度之间的Ｔａｆｅｌ关系式,η＝０．１２＋０．０５２ｌｏｇｉ（ｉ＝０．０１５－０．４４Ａ／ｃｍ２）。用三角波电位扫描法测定了电极析氧过程的伏安曲线     

T形微通道中气泡分散流的传质性能

在T形微通道中,以错流剪切的分散方式实现了微米级分散气泡的制备,并以NaOH水溶液吸收CO2为对象,考察了气．液微分散体系的分散规律和传质性能．通过考察两相流速对气泡分散尺寸的影响,建立了预测气泡形成尺寸的数学模型．根据气泡的初始分散尺寸、流动阶段的体积变化以及传质完成后的尺寸,首次测定和区分了气泡形成阶段和运动阶段的传质量,建立了原位测定气泡分散流传质系数札的方法,并考察了两相流量对札的影响．结果表明,由于微通道中气泡的形成时间很短,形成阶段的传质量在总传质量中所占的比例很低．气泡分散流的传质系数主要受液相流量的影响,气相流量的影响基本可以忽略．基于实验结果,建立了计算传质系数鼠的无因次准数关联,计算结果与实验结果符合良好．     

粉末多孔镍电极电化学阻抗谱及其数学模型

镍电极反应动力学在大多情况下是受固态质子扩散过程控制的，以此为出发点建立了具有明确物理意义的镍电极电化学阻抗谱（EIS）的数学模型．并以该模型为基础，讨论了一些模型参数如双电层电容C（d1）、质子扩散系数D及活性物质位于半径γ0等的改变，电极的不同行电状态以及多孔镍电极中的传质过程对镍电极阻抗谱的影响．理论模型较好地解释了一些实验结果．     

不同浸润性多孔电极表面的气泡行为

采用氢气模板法制备了具有多孔结构的电极; 通过改变电镀电流密度和电镀时间实现了电极表面多孔结构孔径和分布的控制; 通过改变表面化学组成有效调控了电极表面的浸润性质. 比较了具有不同微观结构和表面化学组成的电极在给定条件下电解水过程中气泡的产生及行为机制. 实验结果表明: 相对于亲水的多孔电极, 疏水的多孔电极表面能够黏附气泡, 更易倾向于形成稳定的气膜; 多孔结构对于亲水电极表面气泡行为的影响比对疏水电极表面气泡行为的影响更为显著; 与没有多孔结构的亲水电极相比, 具有多孔结构的亲水电极表面产生的气泡数量多, 速率快; 与较小孔径的多孔亲水电极相比, 较大孔径的多孔亲水电极表面产生气泡速率快且黏附气泡数量少. 该研究结果为微气泡减阻电极的设计提供了理论依据.     

循环流化床生物质气化炉内计算流体动力学模拟——鼓泡流化床内改进的颗粒床模型（英文）

采用改进颗粒床模型的CFD方法模拟了实验室规模冷模装置内鼓泡床的流体流动时空特性。模拟结果表明表观气速是影响气固动态特征和压力波动的主要因素之一：随表观气速的增大，气泡数目增加，气泡体积增大，压力波动增强；气速越高时均压降越大；在内循环鼓泡流化床内固体颗粒呈“单室”流型。上述与实验观察相吻合的模拟结果将有助于放大和设计商业化的内循环流化床生物质气化炉。     

氧阴极用于电解电渗析法制备硅溶胶研究

通过对氧阴极电解电渗析槽和析氢电解电渗析槽的槽电压、电流效率、能耗等的比较,说明在电化学法制备硅溶胶过程中,用氧阴极代替析氢电极可将电解电渗析过程返回到电渗析过程。在电流密度０～１００ｍＡ·ｃｍ－２范围内,槽电压降低０．８６～１．３Ｖ左右,可节约电能１６％左右,而其电流效率则基本上不受影响     

降低电解水过程中传质过电压技术的研究进展

目前电解水技术中因反应过电压和传质过电压的存在使得电解效率较低,现有研究大多侧重开发活性更高的催化剂来降低反应过电压,提高电解效率。本文主要从气液流动和电解液内发生的传质的角度出发,对降低电解过程中传质过电压的技术进行综述：包括设置磁场,超声场,超重力场,并对其强化原理进行分析;另外,对通过优化电解过程操作条件来降低过电压的方法也进行了综述：包括改变电解槽操作温度、操作压力和供电方式。磁场变化可以加速离子迁移;超声场能有效降低电解液中弥散气泡的平均粒径和气泡脱离时间,加强传质;超重力会提供更强的传质驱动力,气泡也更易从电极表面脱离;温度升高可以加快反应速率,降低电能消耗,但需要提高压力来调节氢气在电解液中的溶解度,可能导致设备成本上升;脉冲电源供电比传统稳定的直流电源能耗更低。     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.     

Synthesis of N-substituted carbazolones from α-iodo enaminones via Pd(0)-catalyzed intramolecular coupling under microwave irradiation

A variety of N-aryl and N-alkyl carbazolones were conveniently achieved in good to high yields via Pd₂(dba)₃-mediated intramolecular coupling of N-substituted α-iodo enaminones under microwave irradiation. The Pd(0)-catalyzed cyclization was found to proceed favorably with the more electron-deficient phenyl ring during the reactions involving unsymmetrical N,N-diaryl α-iodo enaminones. This unique property enables the construction of carbazolone skeleton containing nitro substituted benzenoid ring.     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles by intramolecular nitrilimine cycloaddition

Both substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles have been synthesized by the 3+2 intramolecular dipolar cycloaddition of nitrilimines to alkynes. This cyclization has been extended to more versatile 3-bromo derivatives by the use of alkynylbromides as dipolarophiles.