组合式脉冲微型反应评价系统及其在催化剂评价中的应用

介绍了一种可灵活配置不同分析方法、操作便利、评价结果重复性好的组合式脉冲微反色谱评价系统。该装置由微型反应系统、独立控温的连接管线和色谱分析系统三部分组成。微型反应系统采用两段式加热炉和石英玻璃管反应器,有效恒温区间为25~30 mm,催化剂装量为5~300 mg;能够独立控温的连接管线,最高使用温度可达480℃;微型反应系统的载气借用了分析系统进样口的载气系统,可方便地进行载气流量、流速的精确控制以及不同控制模式间的转换。配套开发的微反产物汽油馏分单体烃详细组成和快速模拟蒸馏在线分析方法,前者可以提供微反产物汽油馏分的单体烃数据和相应的物性数据,而后者可同时评价分子筛/催化剂的初活性及活性随累积进样量增加而变化的趋势。     

铁基催化剂成型方式对浆态床费-托合成反应性能的影响

采用连续共沉淀方法制备了无定形Fe-Cu-K-SiO2催化剂,利用连续共沉淀与喷雾干燥成型技术相结合的方法制备了不同粒径的微球形Fe-Cu-K-SiO2催化剂.在接近反应工况的条件下对催化剂进行了浆态床费-托合成(FTS)反应性能评价,并对催化剂进行了物性表征.表征结果表明,无定形催化剂没有规整的外形和均一的粒径分布,微球形催化剂的表面光滑,球形度好,颗粒分布均匀.浆态床FTS反应评价结果表明,尽管无定形催化剂的初活性及最高活性较高,但蜡产物与催化剂的在线分离困难;随着成型时平均粒径的增大,微球形催化剂的活性降低,但失活速率减慢,烃产物选择性向轻组分方向偏移,容易实现蜡产物与催化剂的在线分离.     

TiO2/AC复合光催化剂对苯和丁醛的气相光催化降解机理

 利用溶胶-凝胶并水热处理法制备了TiO2光催化剂和TiO2/AC复合光催化剂,在静态光催化反应器中研究了苯和丁醛的气相吸附和光催化降解,利气相色谱分析确定了生成的中间体. 结果表明, TiO2/AC复合光催化剂比TiO2光催化剂具有较强的吸附能力和较高的光催化活性; 在TiO2和TiO2/AC上,苯(或丁醛)光催化降解产生相同的中间体,表明在两种催化剂上发生的光催化反应遵循相同的机理,进而讨论了其可能的光催化氧化途径.     

简讯

裂解气在线色谱分析获重大突破由天华化工机械及自动化研究设计院和扬子石化公司联合承担完成的中石化科技攻关项目---乙烯裂解装置在线色谱分析系统研发与服务,日前在北京通过中石化组织的技术鉴定。在线色谱分析仪稳定运行可为优化乙烯生产、提高乙烯收率提供重要的控制数据,是乙烯装置关键的工艺参数之一。据介绍,该技术针对石化装置裂解气在线色谱分析仪运行不稳、取样数据不够精确的问题,在原取样器的基础上首创出二次旋风分离     

串接反应色谱法对甲醇催化脱水产物的一次性分析

提出一种用微反应色谱法来研究甲醇气相脱水制备二甲磨灭 的色谱分析流程,可以一次性分析得到气相和液相组份的定量数据,实现在线化实时分析,避免通常必须对液相组份进行冷凝然后单独对液相组份进行化学分析,流程的安排是：首先用一个色谱柱将甲醇脱水产物中的水、甲醇、乙醇完全分离并与其他组份分开,在氢化钙转化反应器中,将已经分离的水、甲醇、乙醇集资转化成氢,用热导检测器测定,在吕接的第二个色谱柱中实现其它组份的     

光催化苯制苯酚的研究进展（英文）

苯酚作为一种重要的有机化学品,广泛用于制造树脂、合成橡胶、染料和药品等行业.然而,传统的苯酚生产方法——联苯法存在着许多问题,如反应条件苛刻和产物纯度低等,这些问题严重制约了苯酚的工业化生产应用.因此,开发一种高效、绿色的苯酚制备方法十分必要.目前,苯一步法制苯酚反应备受关注,然而,实现该反应难度很大.首先,苯分子的C(sp²)-H键活化在化学反应中比较稳定,难以高效活化.其次,相比惰性反应物苯,产物苯酚分子本身更易氧化,使反应的选择性调控成为挑战.光催化选择性氧化苯制苯酚具有反应条件温和、选择性高和产物纯度高等优点,是一种很有工业应用前景的苯酚制备方法.本文系统总结了近年来多相光催化氧化苯制苯酚的研究进展,包括从光催化剂设计原则、改性策略、反应机理分析、影响反应动力学的因素、反应器设计和光催化剂失活机制等方面.首先,单原子、层状双氢氧化物和金属簇构成的光催化剂具有高效催化作用和良好的反应选择性.其次,在光催化反应过程中,光催化剂的设计和合成是非常关键的,可以通过调节光催化剂的组成和结构来提高反应效率和选择性.此外,基于原位表征和密度泛函理论计算的机理研究也为光催...     

生物质合成气一步法合成二甲醚的在线分析系统

建立了一套由生物质合成气一步法制取二甲醚的在线分析系统.针对生物质合成气一步法合成二甲醚特征,采用两台分别装有TCD和FID检测器的色谱仪分析反应产物.利用原料气中N2作为内标物,来确定TCD上检测到的永久性气体组分浓度;通过CH4作内标物,来确定FID上检测到的有机物组分浓度.TCD和FID之间通过CH4来关联,从而确定反应产物中主要组分的浓度.该系统在压力3 MPa,温度250℃,空速(流速与催化剂体积的比值)分别为1 000、2 000、3 000 h-1的条件下用C306和HZSM-5催化剂进行评价测试,发现系统分析效果好,重复性高,并且反应前后主产物碳平衡到达90%以上.     

光致清洁电极可见光在线更新与细胞实时监测

电化学传感器在用于细胞实时监测过程中,电极界面污染严重影响其检测性能.通过将纳米光催化剂与电化学传感材料复合,构建光致清洁电化学传感器,为电极界面的高效及无损更新提供了新思路.然而光催化产生的活性氧自由基导致细胞损伤,限制了细胞培养及检测过程中电极界面的实时更新.为此,我们在PEDOT@CdS/TiO₂/ITO可见光致更新电极表面旋涂明胶薄层,在保持电极良好的光致清洁和电化学传感性能同时,利用明胶薄层阻碍光催化产生的活性氧自由基扩散至细胞表面,显著降低了细胞损伤.此外,明胶优良的生物相容性有利于细胞的黏附及增殖.利用该电极,我们实现了人脐静脉内皮细胞（HUVECs）培养过程中,电极的在线更新以及细胞释放一氧化氮的实时监测.     

水相中可见光下苯甲醇氧化合成喹唑啉酮衍生物的研究

通过在水相中可见光下2-氨基苯甲酰胺与苄醇氧化制备喹唑啉酮的环化反应,应用廉价易得、操作简单的单质碘作为光催化剂,在室温下反应获得较好收率的产物.目标产物的最高产率可达92%,为喹唑啉酮类化合物的合成提供了一种绿色经济的方法.运用此策略合成的N-(2-氟-5-甲基苯基)-6-(2,2,2-三氟乙氧基)蝶啶-4-胺对肿瘤细胞具有明显的抑制活性.     

制备条件对稀土掺杂TiO2物理性质和光催化降解吡唑草胺性能的影响

多相光催化是一种非常有效的降解各种水污染物的方法.本文以稀土(镝和镨)掺杂的TiO2为光催化剂,考察了制备条件对其物理性质和光催化性能的影响.采用溶胶-凝胶法和不同条件(反应温度450,550,650oC;反应时间4,8,12 h)的固态反应法制备了TiO2样品.运用X射线衍射分析了该样品的晶相,发现只存在锐钛矿相,并得到Raman光谱的证实.同时采用扫描电镜观察了样品的结构和粒径;以BET法计算了其比表面积;运用紫外-可见光漫反射光谱测得了样品的带隙能量.通过测量紫外光照射下常用除草剂吡唑草胺的降解速率评价了样品的光催化活性,反应过程中吡唑草胺的浓度用高效液相色谱分析.结果表明,稀土掺杂使得TiO2吸收边红移,并提高了其光催化活性;制备时最优的固态反应条件为550oC反应8 h.     

一种香精的气相色谱—裂解气相色谱联用分析方法

讨论了裂解二次反应对气相色谱—裂解气相色谱联用定性分析起的作用,改进了气相色谱—裂解气相色谱联用装置,对7组分的香精作定性分析,研究了多种实验条件与定性参数的关系,提出可用一组裂解色谱参数作为实用的主要定性依据,另一组参数作为辅助依据。     

Photocatalytic oxidation of n-octanol in aerated supercritical CO2 on hydrophobic TiO2

Supercritical CO₂ (scCO₂) has been used as a reaction medium for the photocatalytic oxidative degradation of n-octanol on a partially desilanized hydrophobic suspension of TiO₂ as photocatalyst. Hydrophobic sites on the catalyst surface are necessary to maintain a sustained suspension, and hence surface-mediated interfacial electron exchange, in this non-polar medium. The reaction rates for photooxidative degradation, ultimately to complete mineralization, depend only weakly on temperature and pressure of the supercritical fluid near the critical point. Product distributions were monitored in situ by on-line gas chromatographic analysis, which provides a convenient and rapid method for comparisons and optimization of the reaction conditions.     

Automated capillary gas chromatographic system to monitor ethylene emitted from biological materials

An automated capillary gas chromatographic system to measure ethylene emitted from biological materials is presented. The system consists of an on-line sampling device, a thermodesorption preconcentration apparatus and a capillary gas chromatograph with a flame ionization detection system. The limit of detection achievable on the GC system alone is 5 pg ethylene. The use of the strong Carboxen 1000 adsorbent at a sampling temperature as low as -50 degrees C allows sampling of volumes up to a few liters. Ethylene concentrations at low ppt levels can be accurately and reproducibly determined.     

Particle-into-liquid sampler on-line coupled with solid-phase extraction-liquid chromatography–mass spectrometry for the determination of organic acids in atmospheric aerosols

In the present study, sample collection and preparation were directly integrated with a chromatographic system by coupling a particle-into-liquid sampler for the first time on-line with solid-phase extraction-liquid chromatography–tandem mass spectrometry. Several organic acids, such as adipic, hydroxyglutaric, mandelic, vanillic, cis-pinonic, pinic, azelaic and sebacic, were used in the research. For sample pretreatment and concentration, strong anion exchange material was used in the extraction. Sampling, extraction and analysis conditions were optimized to obtain reliable information about aerosol chemical composition. To evaluate the performance of the on-line coupled system, half of each sample was analysed on-line and the other half was derivatized and analysed off-line by gas chromatography–mass spectrometry. Comparison of the two techniques with use of t-test showed the results to be in an excellent agreement. Limits of detection of studied acids in on-line system were between 0.1 and 0.9 ng. The on-line coupled system is fast and reliable and a promising tool for the real time analysis of organic acids in atmospheric aerosols.     

Multi-dimensional chromatography using on-line coupled microcolumn liquid chromatography—capillary gas chromatography for quantitative pesticide residue analysis

Highly selective separations can be achieved by utilizing different separation modes in a multi-dimensional (on-line coupled) chromatographic system. The application of such a system utilizing microcolumn liquid chromatography coupled on-line to capillary gas chromatography for the determination of 2-(1,1-dimethylethyl)-5-pyrimidinol, a pesticide metabolite, in various corn matrices at the ng g^?1 level is described. A comparative quantitative study with conventional manual sample pretreatments followed by capillary gas chromatography-mass spectrometry indicated equivalence between the two techniques. The system offers the advantages of reduced sample handling steps and analysis time, high potential for automation and adequate sensitivity.     

A continuous two-phase reaction system coupled on-line with capillary chromatography for the determination of polar solutes in water

Gas chromatographic procedures are described for the determination of carboxylic acids and chlorinated anilines in water samples. Propionic acid and 2,6-difluorobenzoic acid in aqueous solution have been simultaneously alkylated and extracted by means of a continuous two-phase reaction system, and then quantitated by on-line coupled capillary gas chromatography; tetrahexyl-ammonium hydrogen sulfate was used as phase transfer catalyst and pentafluorobenzyl bromide as reagent. A factorial design approach was used to optimize on-line derivatization of aqueous propionic acid with regard to pH and concentration of phase transfer catalyst. Alkylation and extraction, under optimized conditions, followed by quantitation of the pentafluorobenzyl ester by flame ionization detection furnished a linear calibration for concentrations between 0.1 and 10 μg/ml. The relative standard deviation was 9–15 %. The continuous two-phase reaction system was also used to determine (chlorinated) anilines present in water at concentrations of 0.1–1 μg/ml; pentafluorobenzoyl chloride was used as reagent and analysis was performed by capillary gas chromatography with flame ionization or electron capture detection. The on-line acylation of p-chloroaniline was optimized with regard to pH, reagent concentration, and reaction time. The on-line reaction system worked satisfactorily for both applications, although excess reagent caused some problems with the chromatography.     

在线分析脱丙烷塔顶中气体组分的气相色谱柱系统研究

 根据生产要求 ,对裂解装置中高压和低压脱丙烷塔顶中工艺气的气相色谱在线监控柱切换流程进行了研究。通过 3个进样器的二次异步进样 ,结合前吹、反吹等技术 ,应用 7根柱子 ,成功地在 6min内实现了对 C2 ' S、丙烷、丙烯、丙炔、丙二烯及 C4' S的在线分离分析。现场应用表明 ,研制的柱切换系统满足工艺监控要求。     

On-line fluorescence detection in HPLC: A high sensitive technique for the measurement of low enzyme activities: The case of tryptophan-hydroxylase

Summary The use of on-line fluorescence detection after high-performance liquid chromatographic separation permits the direct quantitative analysis of the reaction mixture of enzymes with low activity. The application to the determination of tryptophan-hydroxylase in vitro as well as in vivo is described. The whole system has a detection limit of 0.1 g 5-hydroxytryptophan formed/hour/gram of brains.     

External accumulation of ions for enhanced electrospray ionization fourier transform ion cyclotron resonance mass spectrometry

Electrospray ionization (ESI) in combination with Fourier transform ion cyclotron resonance (FTICR) mass spectrometry provides for mass analysis of biological molecules with unrivaled mass accuracy, resolving power and sensitivity. However, ESI FTICR MS performance with on-line separation techniques such as liquid chromatography (LC) and capillary electrophoresis has to date been limited primarily by pulsed gas assisted accumulation and the incompatibility of the associated pump-down time with the frequent ion beam sampling requirement of on-line chromatographic separation. Here we describe numerous analytical advantages that accrue by trapping ions at high pressure in the first rf-only octupole of a dual octupole ion injection system before ion transfer to the ion trap in the center of the magnet for high performance mass analysis at low pressure. The new configuration improves the duty cycle for analysis of continuously generated ions, and is thus ideally suited for on-line chromatographic applications. LC/ESI FTICR MS is demonstrated on a mixture of 500 fmol of each of three peptides. Additional improvements include a fivefold increase in signal-to-noise ratio and resolving power compared to prior methods on our instrument.