新型聚酯增塑剂的合成及增塑聚氯乙烯性能

以生物质化工产品衣康酸加氢产物2-甲基丁二酸为原料,采用熔融缩聚法制备了一种新型聚酯增塑剂聚2-甲基丁二酸1,3-丙二醇酯,采用红外光谱(FTIR)和核磁共振(1H NMR)对聚酯的结构进行了表征.通过扫描电镜(SEM)、动态力学分析(DMA)、拉伸测试对该聚酯增塑聚氯乙烯(PVC)的增塑效果进行的表征结果表明,该聚酯与PVC相容性良好,可大大改善PVC材料的硬度,增加其断裂伸长率,降低PVC的玻璃化转变温度、拉伸强度及拉伸模量.与小分子增塑剂邻苯二甲酸二辛酯(DOP)相比,合成的新型聚酯增塑剂具有优异的耐抽出性、耐挥发性和耐迁移性,可提高PVC材料的使用寿命.     

聚(丁二酸丁二酯-co-丁二酸丙二酯)的等温结晶行为研究

以1,4-丁二酸、1,4-丁二醇和1,3-丙二醇为原料通过直接熔融缩聚法合成了聚丁二酸丁二酯(PBS),聚丁二酸丙二酯(PPS)和聚(丁二酸丁二酯-co-丁二酸丙二酯)(PBSPS)等脂肪族聚酯.利用1H-NMR,WAXD,DSC和POM等研究了聚酯的结晶结构和结晶动力学过程等结晶行为.PBSPS的结晶晶型与PBS一致,说明只有丁二酸丁二酯(BS)单元结晶而丁二酸丙二酯(PS)单元处于无定形区.聚酯等温结晶后,在升温熔融过程中出现了多重熔融峰.分析表明多重熔融峰主要来自于聚酯升温过程中的熔融-重结晶行为.利用Avrami方程分析了聚酯的等温结晶动力学,Avrami指数n为2.2~2.8,说明聚酯等温结晶时主要以异相成核的三维生长方式进行;随着PS单元的增多,聚酯的表观结晶活化能升高,也就是说BS单元的结晶变得困难.POM观察到聚酯等温结晶时都出现了环带球晶现象,球晶形态会随着结晶温度和化学结构差异而改变.     

基于“点击反应”的官能化环酯单体的合成及聚酯性能研究进展

聚酯高分子材料在医药生物材料领域有很广泛的应用,尤其是可作为药物缓释材料应用在人体当中。作为药物缓释材料的聚酯,需要具有较多的修饰位点,便于药物分子或其它小分子的键合。为了能够简便地、高效地将小分子键合到聚酯链上,可采用目前热门的"点击反应"进行小分子键合,这就需要将涉及"点击反应"的官能团引入到聚酯链上。由于采用合成聚酯的方法多为开环聚合反应,就需制备出双键和叁键官能化环酯类单体,便于以开环聚合方法制备官能化聚酯。本文综述了近年来基于"点击反应"而合成的官能化环酯类单体,将酯类单体分为三类进行了合成方法的详细介绍,重点归纳了所得到的官能化聚酯的聚合结果及其所键合的分子,阐述了官能化聚酯所具有的新性质,最后对这类聚酯材料的应用前景做了展望。     

Ⅲ.二元酸与多元醇的三向聚酯反应动力学

多元酸与多元醇的三向聚酯反应,象单元酸与单元醇的酯化反应一样,是氢离子催化机构,并且,动力学方程与酸基和醇基的起始克分子比有密切关系。我们首先用严格的动力学方程处理三向聚酯反应的实验数据。当酸基与醇基以等克分子比起反应,在无外酸存在时,三向聚酯反应是2(1/2)级反应。若有外酸作催化剂,如氢离子由外酸和多元两方面供给,三向聚酯反应不是二级反应,只有当外酸的量加到适当多,多元酸本身供给的氢离子可以忽略不计时,才是二级反应。当酸基与酸基以不等克分子比反应,我们的实验结果亦与理论一致。根据我们的实验结果,丙三醇中的伯羟基和仲羟基的反应能力相差很小,可以用同一反应速度常数处理实验数据。不论酸基与醇基是等或不等克分子比的丁二酸与异戊四醇,己二酸与异戊四醇,癸二酸与异戊四醇,以及己二酸与丙三醇在不同温度,有无外酸作催化剂,和有无间甲酚作溶剂时的三向聚酯反应,实测的凝膠点,都与计算值很相近(在±1%范国内)。并且,用实验证明凝膠点只与起始的多元酸的羧基与多元醇的羟基的克分子比,以及与其官能团的数目有关,与反应温度,有无催化剂和溶剂存在,催化剂的量,以及酸和醇的种类无关。同时也指出 Stockmayer 和 Flory 等实测的凝膠点与理论计算值所以不相符合的可能原因。     

脂肪族聚酯-酰胺的研究进展

脂肪族聚酯-酰胺（polyester-amides）合了聚酯和聚酰胺的优点，如具有优良的物理力学性能和加工性能等等。因此，对脂肪族聚酯-酰胺的研究成为近年来的研究热点。本文从脂肪族聚酯-酰胺的模型化合物（以双酰胺-二醇单体为例）的研究进展入手，分析了模型化合物的结构特点，以及模型化合物与相应聚合物之间的联系，从而为进一步研究聚合物打下一定的基础。本文还综述了脂肪族聚酯-酰胺的分类，各类脂肪族聚酯-酰胺的合成方法，以及脂肪族聚酯一酰胺在可生物降解材料和热塑性弹性体等领域的应用。     

链段相容性对聚酯-聚醚多嵌段共聚物组成均一性的影响

<正> 由结晶型芳族聚酯为硬链段,无定型脂肪族聚醚为软链段的聚酯-聚醚多嵌段共聚物,是一类性能优良的热塑弹性体,本文研究链段相容性对这类聚合物组成均一性的影响,因此,合成了一系列不同链段结构的聚酯-聚醚多嵌段共聚物。 如硬链为聚对苯二甲酸乙二醇酯(PET)和丁二醇酯(PBT);软链段有聚乙二醇醚(PET)、聚丁二醇醚(PTMG)、聚二醇醚(PPG)和四氢呋喃同环氧丙烷的共聚醚二醇     

具有超支化结构的聚醚型脂肪族聚氨酯弹性体的合成与表征及力学性能研究

用聚四氢呋喃醚二醇、端羟基超支化聚酯(HB-20)、异佛尔酮二异氰酸酯和1,4-丁二醇,合成了含有超支化结构的聚醚型脂肪族聚氨酯(PU)弹性体.通过Flory-Rehner公式计算了体系的交联密度;用FT-IR、WAXD和DSC表征了超支化PU的氢键化程度和形态.实验结果表明,在PU弹性体中引入少量的HB-20,能提高氨基甲酸酯羰基的氢键化程度和软硬段间的微相分离程度,从而显著提高材料的拉伸强度.由于氢键化程度和交联密度双重效应的影响,含6 wt%HB-20的聚醚型PU与不含HB-20的PU相比拉伸强度提高了2倍多,达到37.9 MPa,断裂伸长率仍高达414%.     

聚十二烷二元酸丁二酯及其共聚酯的结晶行为研究

聚十二烷二元酸丁二酯是长碳链脂肪族聚酯中的一种新的聚合物材料．近年来，随着对环境问题的日益重视，利用脂肪族聚酯容易水解的特性，开发生物降解脂肪族聚酯材料的研究得到广泛开展．目前脂肪族二元酸酯的研究大多是围绕聚丁二酸酯、聚乙二酸酯及其共聚酯这一类降解速度较快的材料进行的．虽然这些聚酯已有部分商品化，但远远不能满足对特定降解速率材料的需求．长碳链脂肪族聚酯由于其具有类似PE的结构特征，又兼具聚酯的结构特征，有望在可降解包装材料、书籍装订、服装用热熔胶等方面获得广泛的应用．     

淀粉与聚丁二酸己二醇酯的反应及其生物降解性研究

合成了一种新型的完全生物降解型材料－淀粉－聚丁己二醇酯共聚物，对影响聚丁二酸己二醇酯的分子量及淀粉与聚丁二酸己二醇酯反应接枝率的主要因素进行了研究，当聚丁二酸己二醇酯酰氯化物与淀粉投料重量比为４：１时，聚酯的接枝率达到３８．２０％，接枝共聚物用枯草芽孢杆菌和金黄色葡萄球菌降解４０ｄ，其失重率达８９．６０％，在土壤中堆埋９０ｄ，接枝共聚物基本完全被降解。     

杂多酸引发甲氢呋喃开环聚合反应——Ⅶ.以1，1，1—三羟甲基丙烷为分子量调节剂

聚氨酯是由硬段和软段组成,其中的软段主要来源于聚醚或聚酯,通过化学交联反应可改变聚氨酯的力学性能,由过氧化物引发或使用小分子的三醇作为扩链剂对聚氨酯的硬段进行化学交联,所得聚氨酯的性能会变坏;而使用环氧丙烷（PO）与四氢呋喃（THF）的共聚醚三醇来制备在软段化学交联的聚氨酯,所得聚氨酯与由PO－THF共聚醚二醇制备的聚氨酯相比,断裂伸长率有轻微的下降,但抗拉强度得取了很大改善,由此可见,通过聚醚多元醇对聚氮酯的软段进行化学交联,有利于改善其力学性能。     

Synthesis, characterization and in vitro degradation study of a novel and rapidly degradable elastomer

Biodegradable elastomers represent a useful class of biomaterials. In this paper, a novel biodegradable elastomer, poly(PEG-co-CA) (PEC), was synthesized by condensation of poly(ethylene glycol) (PEG) and citric acid (CA) under atmospheric pressure without any catalyst. We first synthesized a pre-polymer by carrying out a controlled condensation reaction between PEG and citric acid, and then post-polymerised and simultaneously cross-linked the pre-polymer in the mould at 120 °C. The pre-polymer was characterized by FT-IR, ¹H NMR, ¹³C NMR, GPC and DSC. A series of polymers were prepared at different post-polymerisation time and different monomer ratios. Measurements on the mechanical properties of PEC testified that the new polymers are elastomers with low hardness and big elongation, and hydrolytic degradation of the polymer films in a buffer of pH 7.4 at 37 °C showed that PEC had excellent degradability (all the films show the weight losses more than 60% after 96 h incubation). The different post-polymerisation time and monomer ratio had strong influence on the degradation rates and mechanical performances. The material is expected to be useful for controlled drug delivery and other biomedical applications.     

SYNTHESIS AND PROPERTIES OF POLY-1,3,5-TRIAZINES

Two new polytriazines: poly[2-methyl-4, 6-(4,′4″-diphenylene)-1, 3, 5-triazine] (Ⅰ) and poly[2-phenyl-4, 6-(4′, 4″-diphenylene)-1, 3, 5-triazine] (Ⅱ) were synthesized from the solution condensation of biphenyl-4, 4′-diamidine dihydrochloride with acetic anhydride and biphenyl-4, 4′-diamidine with benzaldehyde respectively. These two polymers were characterized by TGA, DTA, elemental analysis and IR spectroscopy. They exhibited good thermal oxidative stability as shown by the fact that the powders of these polymers suffered 5.4%, 2.4% weight loss after isothermal aging in air at 300℃for 200 hours. The decomposition temperature of (Ⅱ) was 583℃in air and 590℃in N_2. These linear poly-1, 3, 5-triazines were soluble in concentrated sulfuric acid, phosphoric acid and trifluoroacetic acid whereas the erosslinked poly-1, 3, 5-triazines reported in the literature were insoluble and infusible.It is interesting that these polymers can form complexes with metal halides as determined by X-ray photoelectron spectroscopy (XPS). The polymer metal complex (Ⅲ). PdCl_2 possesses catalytic activity for hydrogenation.     

Characterization of crosslinked Macrotyloma uniflorum(Horsegram) protein films for packaging and medical applications

Natural polymers such as proteins and polysaccharides are of great demand in packaging and medical applications. Horse gram (Macrotyloma uniflorum) is a good source of protein and possess excellent antioxidant properties. The present study investigates the development and potential applications of transparent and water-resistant horse gram protein-based films crosslinked with citric acid. Films prepared were further characterized for their physical, chemical and biological properties. Films crosslinked at higher concentrations (15%) of citric acid exhibited 50% reduction in water sorption and reduced water vapor permeability. At 15% citric acid concentration, the films showed excellent free radical scavenging of up to 96%. Also, maximum antimicrobial activity against clinical isolates were observed for the 15% citric acid crosslinked films. Increase in thermal stability and decrease in water vapor permeability was obtained at higher levels of crosslinking. The crosslinked films were cytocompatible and showed potential to be used as substrates for cell culture. Citric acid crosslinked horse gram protein films have good physicochemical properties along with biological activities and could be suitable for applications in the packaging and medical fields.     

Enhanced Production of Poly-γ-glutamic Acid by <Emphasis Type="Italic">Bacillus licheniformis</Emphasis> TISTR 1010 with Environmental Controls

Bacillus licheniformis TISTR 1010 was used for glutamic acid-independent production of poly-γ-glutamic acid (γ-PGA). A fed-batch production strategy was developed involving feedings of glucose, citric acid, and ammonium chloride at specified stages of the fermentation. With the dissolved oxygen concentration controlled at ≥50% of air saturation and the pH controlled at ~7.4, the fed-batch operation at 37 °C afforded a peak γ-PGA concentration of 39.9 ± 0.3 g L^?1 with a productivity of 0.926 ± 0.006 g L^?1 h^?1. The observed productivity was nearly threefold greater than previously reported for glutamic acid-independent production using the strain TISTR 1010. The molecular weight of γ-PGA was in the approximate range of 60 to 135 kDa.     

Purification and Properties of an Extracellular Polyhydroxybutyrate Depolymerase from Pseudomonas mendocina DSWY0601

An extracellular polyhydroxybutyrate(PHB) depolymerase was purified to homogeneity from the culture supernatant of a PHB-degrading bacterium, Pseudomonas mendocina DSWY0601, which was isolated from brewery sewage for the ability to form clear zones on the PHB mineral agar plates. The molecular weight of the purified PHB depolymerase as determined by sodium dodecyl sulfate-polyacrylamide gel electrophoresis(SDS-PAGE) was approximately 59800 at the optimal temperature and pH value being 50 ℃ and 8.5, respectively. PHB depolymerase was stable in a temperature range of 20―50 ℃ and sensitive to pH value within a pH range of 8.0―9.5. PHB depolymerase degraded poly-3-hydroxybutyrate-co-4-hydroxybutyrate(P3/4HB) and poly-3-hydroxybutyrate-co-3- hydroxyvalerate(PHBV) but did not degrade poly(lactic acid)(PLA), poly(butylene succinate)(PBS) or poly- (caprolactone)(PCL). PHB depolymerase was sensitive to phenylmethylsulfonyl fluoride(PMSF), H₂O₂ and SDS. The main product after enzymatic degradation of PHB was indentified as 3-hydroxbutyrate monomer(3HB) by mass spectrometric analysis, suggesting that PHB depolymerase acted as an exo-type hydrolase. Analysis of phaZ_pm gene reveals that PHB depolymerase is a typical denatured short-chain-length PHA(dPHA_SCL, PHA=polyhydroxyalkanoate) depolymerase containing catalytic domain, linker and substrate-binding domain.     

无机盐溶液源溶胶-凝胶法制备锶铋钽铁电陶瓷薄膜过程研究

采用可溶性无机盐Sr(NO₃)₂,Bi(NO₃)₃及HTaF6为原料,以柠檬酸、乙二醇及乙二胺四乙酸(EDTA)为络合剂,利用溶胶-凝胶旋转涂覆工艺,分别在Al₂O₃和Pt/Ti/SiO₂/Si的衬底上制备了SrBi₂Ta₂O₉(SBT)铁电陶瓷薄膜.采用SEM,XRD及FTIR等微观分析手段,对制备的SBT溶胶与薄膜过程机理进行了实验研究.结果表明,由无机盐溶液原料络合合成SBT溶胶是此方法制膜的关键,其中络合剂的种类、用量和pH值的控制等是重要的影响因素.制备了相组成均一、薄膜表面致密、均匀、无开裂、晶粒尺寸为150nm的多晶膜,获得了剩余极化(2P_r)与矫顽电场强度(2E_c)分别为9.6μC/cm²与76kV/cm铁电性能较好的薄膜材料.     

层-层自组装构建固相可降解基因传递体系的研究

近年来,随着人类对基因研究的深入,基因治疗作为一种新的手段,受到人们的广泛重视．在组织工程材料、介入医用材料和医用植入体的应用中,与传统的溶液给药方式不同,基因技术需要一种可直接作用于材料表面贴壁细胞的长效、高转染固相基因传递体系．目前,国内外研究者将蛋白质药     

柠檬酸浓度对化学浴沉积硫化铟薄膜形成机理的影响研究

以柠檬酸为配位剂,在酸性条件下采用化学浴沉积方法在FTO玻璃衬底上制得硫化铟薄膜,分别采用XRD、SEM、UV等手段对薄膜相结构、形貌和薄膜的透光率进行了表征。结果表明薄膜为立方结构的β-In2S3,薄膜均一连续,呈网状表面形貌,透光率随厚度增加而递减,带隙宽度介于2.5～2.6 eV之间。主要研究了配位剂的浓度对薄膜形成机理的影响,结果表明:柠檬酸浓度较低时,柠檬酸根与铟离子的配位平衡是整个反应的速控步骤;当柠檬酸浓度较高时,硫代乙酰胺与酸作用生成硫离子的反应是整个反应的速控步骤。     

Biodegradable network elastomeric polyesters from multifunctional aliphatic carboxylic acids and poly(epsilon-caprolactone) diols

Biodegradable elastomeric network polyesters were prepared from multifunctional aliphatic carboxylic acids such as tricarballylic acid (Yt) or meso-1,2,3,4-butanetetracarboxylic acid (Xb) and poly(epsilon-caprolactone) (PCL) diols with molecular weights of 530, 1,250 and 2,000 g.mol-1. Prepolymers prepared by a melt polycondensation were cast from DMF solution and postpolymerized at 280 degrees C for various periods of times to form a network. The resultant films were transparent, flexible and insoluble in organic solvents. The network polyesters obtained were characterized by IR absorption spectra, WAXS, density measurement, DSC, and tensile test. YtPCL1250, and XbPCL1250 network polyester films showed good elastomeric properties with high ultimate elongation (540-590%), and low Young's modulus (2.5-3.3 MPa). The enzymatic degradation was estimated by the weight loss of network films in a buffer solution with Rhizopus delemar lipase at 37 degrees C. The degree and rate of degradation were significantly affected by the molecular weight of PCL diol, chemical structures of multifunctional aliphatic carboxylic acids and the morphology of network films. The changes in the solid states of network films during the degradation were also estimated by the results of DSC and WAXS. [see text]     

含异丙基及三氟甲基可溶性聚酰胺的合成及性能研究

以含异丙基和三氟甲基结构二胺单体3,3′-二异丙基-4,4′-二胺基苯基-4″-三氟甲基甲苯(PATFT)与萘-1,4-二甲酸、间苯二甲酸和4,4-二苯醚二甲酸3种二酸通过膦酰化反应制备一系列新型可溶性聚酰胺,其相对分子量在3.8×104~9.6×104之间.结果表明,该聚合物具有优异的溶解性能,常温不仅能溶解于N-甲基吡咯烷酮(NMP)、N,N-二甲基乙酰胺(DMAc)、N,N-二甲基甲酰胺(DMF)等高沸点有机溶剂,在加热条件下甚至能较好的溶解在四氢呋喃、氯仿、二氯甲烷等低沸点溶剂中;突出的光学性能,截止波长范围在322~350 nm,80%的透过率波长范围为378~403 nm;良好的热学性能,玻璃化转变温度(Tg)范围在213~220?C,氮气氛围下5%和10%热失重温度范围分别为453~458?C和470~482?C.聚合物薄膜具有优异的机械性能,拉伸强度、杨氏模量、断裂伸长率分别对应为68~97 MPa,1.9~2.9 GPa,14.8%~16.7%.广角X-射线图谱表明聚合物为无定形态结构.