Syntheses of Anthracenones. 3. Revised Preparative Route to 10-Benzoyl-1,8-dihydroxy-9(10H)-anthracenones

The acylation of anthralin (1,8-dihydroxy-9(10H)-anthracenone) with acetylsalicylic acid chloride in toluene and collidine was found to give the O-acylated product, rather than 10-(acetylsalicyl)anthralin. A procedure is described for benzoylation of anthralin in the 10-position which involves reaction of 1,8-diacetoxy-9(10H)-anthracenone with benzoyl chloride and sodium hydride in THF followed by hydrolysis of an intermediate enol ester. Furthermore, when benzoyl chloride and DMF were used for the acylation of anthralin, a Vilsmeier-type reaction was observed leading to a novel enamine derivative of anthralin which was hydrolyzed or benzoylated to an enol or enol ester, respectively.     

A handbook of decomposition methods in analytical chemistry : Rudolf Bock (translated and revised by Iain L. Marr), International Textbook Company,London, 1979, 444 pp., £19.75

The influence of anthralin (1,8-dihydroxy-9-anthron) and some of its derivatives on the energy metabolism of human skin fibroblasts in culture has been investigated by means of a batch calorimeter. In the absence of any drug, confluent monolayers produced a fairly constant heat output of 51 ± 5 pW per cell reflecting metabolism of maintenance. Addition of anthralin or a derivative resulted in different effects on the heat production.     

SPECTROSCOPIC STUDIES OF CUTANEOUS PHOTOSENSITIZING AGENTS–XV. ANTHRALIN and ITS OXIDATION PRODUCT 1,8-DIHYDROXYANTHRAQUINONE

The photochemistry (Type I and II) of anthralin and its photo-oxidation product 1,8-dihydroxyanthraquinone (1,8-DHAQ) has been studied in ethanol, acetonitrile and dimethylsulfoxide using spin-trapping and direct detection of singlet oxygen (1O2) luminescence techniques. In ethanol, where it exists in its neutral form (AN), anthralin does not undergo either Type I or II reactions upon UV-irradiation. In contrast, irradiation of anthralin in acetonitrile, a solvent in which anthralin is partially converted to its corresponding mono-anion (AN-), generates both superoxide and singlet oxygen. Irradiation of anthralin in dimethylsulfoxide, where the AN- form is present in substantial quantity, generates superoxide and solvent derived radicals but no detectable singlet oxygen. UV-irradiation of 1,8-DHAQ in ethanol and acetonitrile produces both superoxide and singlet oxygen in significant yields. In dimethylsulfoxide, on the other hand, only superoxide and solvent derived radicals are observed. The 1O2 quantum yield for AN- and 1,8-DHAQ in acetonitrile were determined to be 0.14 and 0.88 relative to rose bengal in the same solvent. These findings suggest that the AN photosensitization occurs via Type I and II pathways, is solvent dependent and involves AN- as well as its oxidation product 1,8-DHAQ, which is a more potent generator of both singlet oxygen and superoxide.     

ANTHRALIN-DERIVED TRANSIENTS—II. FORMATION OF THE RADICAL BY SPONTANEOUS FRAGMENTATION OF BOTH SINGLET AND TRIPLET STATES OF THE 10,10''-DEHYDRODIMER: RADICAL PAIR MULTIPLICITY EFFECTS

The singlet and triplet states of the anthralin (1,8-dihydroxy-9-anthrone) dehydrodimer have been produced selectively in benzene via pulsed laser excitation and pulse radiolysis respectively. The lifetime of S1 is less than or equal to 30 ps, that of T1 short but unspecified. Both states fragment spontaneously to yield a pair of anthralin radicals. The singlet radical pair predominantly undergoes geminate recombination within the solvent cage. In contrast, the corresponding triplet radical pair undergoes essentially exclusive cage escape to give the anthralin free radical (lambda max 370, 490 and 720 nm) which recombines under normal diffusive conditions. Both recombination processes lead, at least in part, to one or more species which have been assigned as tautomeric forms of the original dimer. The anthralin free radical in benzene is insensitive to the vitamin E model 6-hydroxy-2,2,5,7,8-pentamethylchroman and reacts only slowly with oxygen.     

Anthralin: primary products of its redox reactions

One-electron reduction significantly enhances the ability of anthralin, 1, to act as a hydrogen atom donor. On annealing of an MTHF glass in which the radical anion of anthralin, 1*-, is generated radiolytically, this species decays mainly by loss of H* to give the anthralyl anion, 2- . On the other hand, radicals formed on radiolysis of matrices that are suitable for the generation of radical anions or cations are capable to abstract H* from anthralin to give the anthralyl radical, 2* . Both 2- and 2* are obtained simultaneously by mesolytic cleavage of the radical anion of the anthralin dimer. Contrary to general assumptions, the anthralyl radical is found to be much more reactive toward oxygen than the anion. All intermediates are characterized spectroscopically and by reference to quantum chemical calculations. Attempts to generate the radical cation of anthralin by X-irradiation of an Ar matrix containing anthralin led also to significant formation of its radical anion, i.e., anthralin acts apparently as an efficient electron trap in such experiments.     

ANTHRALIN-DERIVED TRANSIENTS–I. THE TRIPLET STATE AND THE PRODUCTS OF ITS REACTION WITH OXYGEN IN BENZENE

Direct laser excitation in benzene of 1,8-dihydroxy-9-anthrone (anthralin) does not lead to transient species with lifetimes in the nanosecond time regime or longer. The triplet state has been produced in benzene by pulse radiolysis and characterised in terms of its absorption spectrum (lambda max 560 nm), natural lifetime (11 microseconds), self-quenching properties (kmicrosecond = 2.6 x 10(7) l mol-1 s-1) and triplet energy (234 kJ mol-1). There is no tendency in the non-polar medium for production of either the triplet or ground state in a tautomeric form. The observed triplet state reacts with oxygen with a typical rate constant, 2.2 x 10(9) l mol-1 s-1. The products of this reaction are singlet oxygen (approximately 64%) and the anthralin radical (approximately 14%).     

Interaction of anthralin with cysteine: a new entry into the chemistry of biologically active anthrones.

Evidence is reported that under physiological conditions anthralin (I), an antipsoriatic drug , reacts with cysteine to give an ether-insoluble adduct which was formulated as 1,8-dihydroxy-10-(2-amino-2-carboxyethylthio)-9-anthrone (III) by model studies and unambiguous synthesis.     

Electronic transitions and intramolecular hydrogen bonding in anthralin. UV-VIS linear dichroism spectroscopy and quantum chemical calculations

The electronic and molecular structure of the antipsoriatic drug anthralin (1,8-dihydroxy-9(10H)-anthracenone) is investigated by UV-VIS linear dichroism (LD) spectroscopy in stretched polyethylene and by quantum chemical model calculations. Seven individual electronic transitions are resolved below 47?000 cm⁻¹ and assigned to calculated π–π* transitions. The low-energy region is characterized by a relatively broad band around 28?000 cm⁻¹ that can be assigned to two overlapping, differently polarized electronic transitions involving a considerable degree of intramolecular charge transfer from the phenolic moieties to the carbonyl group. Computed wavenumbers for these transitions depend significantly on the assumed geometrical parameters for the intramolecular H-bonds in anthralin; best agreement with observed data is obtained with a geometry corresponding to strong H-bonding. The calculations also indicate that excited state intramolecular proton transfer (ESIPT) is likely to occur, leading to the prediction of a very large Stoke's shift.     

Spectrophotometric determination of trace amounts of beryllium using 1,8-dihydroxyanthrone as a new chromogenic reagent

A simple, rapid, and sensitive spectrophotometric method for the trace level determination of beryllium based on the formation of a 1:2 complex with anthralin (1,8-dihydroxyanthrone) as a new reagent is developed. A spectrophotometric method was used to determine the acidity constant and stepwise proton dissociation of the reagent. The experimental conditions for determining beryllium including the influences of pH, reagent concentration and time were evaluated and optimized. Under the optimum experimental conditions, the molar absorptivity of the complex is 0.47 × 10⁴ l mol^?1 cm^?1 at 545 nm. Calibration graph was linear in the range of 0.04–1.04 μg ml^?1 with a detection limit of 0.012 μg ml^?1 and a %RSD of 0.43%, for 5 replicate determinations at 0.48 μg ml^?1 of Be(II). The interferring effect of some cations and anions was also studied. The method was applied for the determination of beryllium in beryl, silicate rock and alloys. Ethylenediaminetetraacetic acid (EDTA) was used for masking interfering ions.     

KINETIC STUDIES ON ANTHRALIN PHOTOOXIDATION

The photooxidation of the antipsoriatic drug anthralin (1,8-dihydroxy-9-anthrone) has been studied by several kinetic techniques, including direct observation of 1O2 (1 delta g) luminescence at 1.27 microns. The rate of deactivation of 1O2 increases at higher pH, demonstrating that the trihydroxyanthracene anion is the reactive species. Direct determination of the rate constant of 1O2 deactivation (kR + kQ) in deuterated buffer systems by luminescence quenching gave a value of 3.0 x 10(8) M-1 s-1 for the anion; the neutral anthrone is unreactive. The rate constant for the neutral anthrone in benzene-d6 is 2.8 x 10(4) M-1 s-1. Competition experiments with tetramethylethylene in acetonitrile gave a rate constant for reaction alone (kR) of 2.1 x 10(8) M-1 s-1 for the anion.     

Syntheses of Anthracenones. 2. Preparation of 1,8-Dimethoxy- (Dimethylanthralin) and 4,5-Dihydroxy-9(10H)-anthracenone (Isoanthralin): A Revision

The reduction of 1,8-dimethoxyanthracenedione with zinc dust and aqueous ammonia gives a mixture of 1,8-dimethoxyanthracene and 4,5-dimethoxy-9(10H)-anthracenone, rather than the isomeric 1,8-dimethoxy-9(10H)-anthracenone (dimethylanthralin). This isomer was obtained exclusively using SnCl(2) in HCl and acetic acid as reducing agent at room temperature. The structure was confirmed to exist as the tautomeric 1,8-dimethoxy-9-hydroxyanthracene. Furthermore, the reduction of 1,8-diacetoxyanthracenedione with SnCl(2) in HCl and acetic acid leads to 1,8-dihydroxy-9(10H)-anthracenone (anthralin) rather than 4,5-dihydroxy-9(10H)-anthracenone (isoanthralin), which was prepared by ether cleavage of 4,5-dimethoxy-9(10H)-anthracenone. In light of these findings some biological studies on antipsoriatic anthracenones have to be reconsidered.     

Self-sensitized photooxygenation of 3,4-dialkoxyfurans to vitamin C or its derivatives

Self-sensitized photooxygenation of 3,4-dialkoxyfurans 3a-d with molecular oxygen and UV- or sunlight at room temperature gave vitamin C derivatives 2a-d in good to excellent yields. Furan 3c, having photodegradable protecting groups, was also photooxygenated to give L-ascorbic acid (1) in a "one-pot" reaction. Furthermore, a novel photolytic transformation was developed for deuteration of furan 3b at the C-2 position with D(2)O to give furan 3d in 95% yield. Toxicity of furans 3a-c and butenolides 2a-c against human embryonic cell, murine embryo fibroblasts, normal fibroblasts, HeLa, and Vero cell lines in the presence of oxygen and indirect solar light was found to be much less than those of the antipsoriasis drugs anthralin and 8-methoxypsoralen.     

CURCUMIN-DERIVED TRANSIENTS: A PULSED LASER AND PULSE RADIOLYSIS STUDY

Abstract In this paper we report a time-resolved investigation of transients derived from curcumin, which may be intimately involved in the processes leading to its biological activity. Fluorescence and triplet quantum yields are respectively 0.06 and 0.11. The high percentage of internal conversion is proposed to proceed via H-transfer within the thermodynamically favored enol structure of what is formally a 1,3-diketone. The triplet energy (191 ± 2 kJ mol⁻¹), natural lifetime (1.5 μs) and self-quenching rate constant (5.0 × 10⁸ L mol⁻¹ s⁻¹) have been determined. Oxygen quenching of the triplet leads to the production of singlet oxygen with unit efficiency. Curcumin quenches the latter species very inefficiently (2.5 × 10⁵ L mob⁻¹ s⁻¹). The curcumin radical has been produced via three mechanistically distinct methods. This species is unreactive toward oxygen but is repaired by vitamins C and E and anthralin.     

Crude fat, hexanes extraction, in feed, cereal grain, and forage (Randall/Soxtec/submersion method): collaborative study

A method for determining crude fat in animal feed, cereal grain, and forage (plant tissue) was collaboratively studied. Crude fat was extracted from the animal feed, cereal grain, or forage material with hexanes by the Randall method, also called the Soxtec method or the submersion method. The use of hexanes provides for an alternative to diethyl ether for fat extractions. The proposed submersion method considerably decreases the extraction time required to complete a batch of samples compared to Soxhlet. The increase in throughput is very desirable in the quest for faster turnaround times and the greater efficiency in the use of labor. In addition, this method provides for reclamation of the solvent as a step of the method. The submersion method for fat extraction was previously studied for meat and meat products and was accepted as AOAC Official Method 991.36. Fourteen blind samples were sent to 14 collaborators in the United States, Sweden, Canada, and Germany. The within-laboratory relative standard deviation (repeatability) ranged from 1.23 to 5.80% for crude fat. Among-laboratory (including within) relative standard deviation (reproducibility) ranged from 1.88 to 14.1%. The method is recommended for Official First Action.     

Crude fat, diethyl ether extraction, in feed, cereal grain, and forage (Randall/Soxtec/submersion method): collaborative study

A method for determining crude fat in animal feed, cereal grain, and forage (plant tissue) was collaboratively studied. Crude fat was extracted from the animal feed, cereal grain, or forage material with diethyl ether by the Randall method, also called the Soxtec method or the submersion method. The proposed submersion method considerably decreases the extraction time required to complete a batch of samples. The increase in throughput is very desirable in the quest for faster turnaround times and the greater efficiency in the use of labor. In addition, this method provides for reclamation of the solvent as a step of the method. The submersion method for fat extraction was previously studied for meat and meat products and was accepted as AOAC Official Method 991.36. Fourteen blind samples were sent to 12 collaborators in the United States, Sweden, Canada, and Germany. The within-laboratory relative standard deviation (repeatability) ranged from 1.09 to 9.26% for crude fat. Among-laboratory (including within) relative standard deviation (reproducibility) ranged from 1.0 to 21.0%. The method is recommended for Official First Action.     

ICP-AES法测定化妆品中铅、镉、砷、汞、锑、铬、镍、钡、锶等禁限用元素含量

建立了化妆品中铅(Pb)、镉(Cd)、砷(As)、汞(Hg)、锑(Sb)、铬(Cr)、镍(Ni)、钡(Ba)、锶(Sr)含量的电感耦合等离子体原子发射光谱法(ICP-AES)同步检测技术。采用微波消解,在较难消化的化妆品中加HF进行消化,铑(Rh)为内标元素消除基体干扰,以配备耐HF进样系统的ICP-AES进行测定。在0～1.0 mg/L范围内呈现良好的线性关系(相关系数≥0.9999),Pb、Cd、As、Hg、Sb、Cr、Ni、Ba、Sr检出限分别为0.0016,0.0007,0.0021,0.0013,0.0003,0.0009,0.0008,0.0009,0.0021 mg/L,方法回收率80.2%～111%,精密度1.7%～8.2%。结果表明,该方法适用于检测基体复杂的化妆品中Pb、Cd、As、Hg、Sb、Cr、Ni、Ba、Sr。     

X-射线荧光光谱法测定锌铝铜合金中的铝、铜、铁、硅、镍、铅和镉

建立了X射线荧光光谱法测定锌铝铜合金ZnAl6Cu1中铝、铜、铁、硅、镍、铅和镉的分析方法。探讨了各元素的分析条件,比较了不同制样方式及不同放置时间对铝强度的影响。在最佳的仪器分析条件下,测定了微量元素的检出限及主、次元素的精密度和准确度。检出限结果表明:各微量元素的检出限均满足标准要求,Cd和Pb元素的定量限稍高。精密度和准确度结果表明,铝、铜、铁元素的测量相对标准偏差在2.1%~5.9%,分析结果与国家标准方法一致。     

Protonation constants of 1-hydroxyethylidene-1,1-diphosphonic acid, diethylenetriamino-N,N,N',N',N'-penta-acetic trans-1,2-diaminocyclohexane-N,N,N',N'-tetra-acetic acid

The stepwise stability constants for the protonation of hydroxyethylidenediphosphonic acid (HEDP), diethylenetriaminopenta-acetic acid (DTPA) and diaminocyclohexanetetra-acetic acid (DCTA) have been determined potentiometrically with a hydrogen electrode at an ionic strength of 1 (KCl) and at 10-35 degrees . The data were treated by a least-squares method for estimation of DeltaH and DeltaS values.     

Direct determination of four fluoroquinolones,enoxacin, norfloxacin,ofloxacin, and ciprofloxacin,in pharmaceuticals and blood serum by HPLC

A rapid, accurate and sensitive method has been developed for the quantitative determination of four fluoroquinolone antimicrobial agents, enoxacin, norfloxacin, ofloxacin and ciprofloxacin, with high in-vitro activity against a wide range of Gram-negative and Gram-positive organisms.A Kromasil 100 C(8) 250 mm x 4 mm, 5 microm analytical column was used with an eluting system consisting of a mixture of CH(3)CN-CH(3)OH-citric acid 0.4 mol L(-1) (7:15:78 %, v/v). Detection was performed with a variable wavelength UV-visible detector at 275 nm resulting in limits of detection: 0.02 ng per 20 microL injection for enoxacin and 0.01 ng for ofloxacin, norfloxacin and ciprofloxacin. Hydrochlorothiazide (HCT) was used as internal standard at a concentration of 2 ng microL(-1). A rectilinear relationship was observed up to 2 ng microL(-1) for enoxacin, 12 ng microL(-1) for ofloxacin, 3 ng microL(-1) for norfloxacin, and 5 ng microL(-1) for ciprofloxacin. Separation was achieved within 10 min. The statistical evaluation of the method was examined by performing intra-day (n=8) and inter-day precision assays (n=8) and was found to be satisfactory with high accuracy and precision. The method was applied to the direct determination of the four fluoroquinolones in human blood serum. Sample pretreatment involved only protein precipitation with acetonitrile. Recovery of analytes in spiked samples was 97+/-6% over the range 0.1-0.5 ng microL(-1).     

Use of NIRS technology with a remote reflectance fibre-optic probe for predicting mineral composition (Ca,K, P,Fe, Mn,Na, Zn), protein and moisture in alfalfa

In the present work we study the use of near-infrared spectroscopy (NIRS) technology together with a remote reflectance fibre-optic probe for the analysis of major (Ca, K, P) and minor (Fe, Mn, Na, Zn) elements, protein and moisture in alfalfa. The method allows immediate analysis of the alfalfa without prior sample treatment or destruction through direct application of the fibre-optic probe on ground samples in the case of the mineral composition and on-ground and compacted (baled) samples in the case of protein and humidity. The regression method employed was modified partial least-squares (MPLS). The calibration results obtained using samples of alfalfa allowed the determination of Ca, K, P, Fe, Mn, Na and Zn, with a standard error of prediction (SEP(C)) and a correlation coefficient (RSQ) expressed in mg/kg of alfalfa of 1.37 × 10³ and 0.878 for Ca, 1.10 × 10³ and 0.899 for K, 227 and 0.909 for P, 103 and 0.948 for Fe, 5.1 and 0.843 for Mn, 86.2 and 0.979 for Na, and of 1.9 and 0.853 for Zn, respectively. The SEP(C) and RSQ values (in %) for protein and moisture in ground samples were 0.548 and 0.871 and 0.150 and 0.981, respectively; while in the compacted samples they were 0.564 and 0.826 and 0.262 and 0.935, respectively. The prediction capacity of the model and the robustness of the method were checked in the external validation in alfalfa samples of unknown composition, and the results confirmed the suitability of the method.