GdAl03：Tb，RE中Tb，RE的能量传递研究

采用柠檬酸盐硝酸盐燃烧法制备了GdAl03：Tb,RE荧光粉体,在紫外激发下（254nm）,GdAl03：Tb发射绿色荧光（^5D4→^7F5,544nm）,Dy共掺杂对绿色发光有增强作用,Ce共掺杂对GdAl03：Tb绿色发光有降低作用,激发谱和能谱研究表明：Dy能级嵌入Tb主发射能级^5D4（绿色发光能级）、^5D3（蓝色发光能级）能级之间,欧能级嵌入Tb主发射能级^5D4、^5D3能级上方,这种能级嵌入方式,使得稀土离子之间存在声子支持的共振能量传递,但Tb→Dy→Tb能量传递使Tb绿色发射（^5D4→^7FJ（J=3,4,5,6））增强,蓝色发射（^5D3→^7FJ（J=3,4,5,6））减弱;而CPTb能量传递使Tb蓝色发射增强,绿色发射减弱。     

新型GdAlO_3:RE荧光粉多元掺杂及发光机制研究

采用柠檬酸盐硝酸盐燃烧法制备GdAlO3:RE荧光粉体.在紫外光激发下(254nm)发现Pr共掺杂对GdAlO3:Eu红色荧光粉体发光有降低作用;Ce共掺杂对GdAlO3:Tb绿色荧光粉体发光有降低作用.激发谱研究表明,共掺杂时分别存在Eu→Pr、Tb→Ce的声子支持的共振能量传递,造成GdAlO3:Eu、GdAlO3:Tb荧光粉体发光强度降低.     

KZnF3∶Ce，Tb的溶剂热合成及光谱性质

采用溶剂热法合成了Ce3+,Tb3+单掺和双掺KZnF3发光粉。分析了样品的结构与形貌。结果表明,所合成的样品均为单相,颗粒粒度分布均匀。讨论了它们的光谱特性。研究发现,在KZnF3∶Ce3+激发光谱中激发带劈裂成2个带峰,最大发光中心分别位于263 nm(主峰)和246 nm,而在发射光谱中只观察到1个带状发射峰,最大发射中心位于330 nm。在KZnF3∶Tb3+激发光谱中存在较强的基质激发峰,而在发射光谱中,发现Tb3+的5D4→7FJ(J=6,5,4,3)跃迁。在KZnF3双掺体系中,Tb3+的发光强度随Ce3+的浓度增加而增强,存在Ce3+→Tb3+能量传递,尤其是Tb3+的5D4→7F5跃迁发射显著增强,有望成为一种有发展前途的绿色荧光材料。     

CeF_3:Tb的水热合成及发光性能研究

在水热条件下,以Ce(NO3)3,Tb(NO3)3和Na BF4为前驱体成功合成了Ce F3:Tb发光材料。X射线衍射(XRD),扫描电镜(SEM),透射电镜(TEM)以及高分辨投射电镜(HRTEM)表征结果表明:所制备的Ce F3:Tb发光材料结晶良好,具有单分散六方片状形貌,颗粒尺寸分布范围为380~420 nm,平均粒径400 nm。光致发光性能(PL)测试表明:其激发光谱是由峰值位于250 nm左右的激发带组成,属于Ce3+4f能级到5d激发态不同晶体场劈裂组分的f-d允许跃迁;发射光谱是由Tb3+的5D4→7FJ(J=6,5,4,3)特征发射组成,其中以543 nm的5D4→7F5发射为主,表明Ce3+能够有效敏化Tb3+。     

(Y,Gd)Al3(BO3)4∶Ce,Tb的光谱特性及稀土离子间的能量传递

采用高温固相反应合成了(Y,Gd)Al3(BO3)4中掺杂Ce3 和Tb3 的样品,并研究了其结构特性、光谱特性和发光过程中稀土离子间的能量传递.(Y,Gd)Al3(BO3)4属于三角晶系,具有R32的空间群,掺入Ce3 ,Tb3 杂质后晶格结构没有变化.(Y,Gd)Al3(BO3)4∶Ce,Tb的激发光谱由3个宽谱带组成,这3个谱带分别对应于Ce3 的4f-5d跃迁吸收.在该体系中存在Ce3 →Tb3 ,Gd 3 →Tb3 和Gd3 →Ce3 的能量传递,其中Ce3 起敏化剂和中间体的双重作用.     

CaBPO5∶RE(RE=Eu,Tb)的水热合成及其发光特性

利用水热法合成了CaBPO5∶RE(RE=Eu,Tb)荧光体并测试了其结构和光谱, 讨论了其发光性质, 并与高温固相法合成的产物作了对比. 结果表明, 由于电子转移, Eu3+, Tb3+和Eu2+共存于同一体系中, 而且Eu2+的发射位置从402 nm移至428 nm. 在双掺杂体系中引入Ce3+, Eu3+, Tb3+和Eu2+的发光强度均有所增强, 这可能是Ce3+与Eu3+之间的电子转移及各种稀土离子之间能量传递相互竞争的结果.     

Ca_2Y_8(SiO_4)_6O_2∶RE(RE=Eu,Tb)发光薄膜的制备及发光性能的研究

采用溶胶 凝胶法制备了稀土离子掺杂 (Eu3 ,Tb3 )的氧磷灰石三元稀土硅酸盐Ca2 Y8(SiO4 ) 6 O2 发光薄膜。通过X射线衍射 (XRD) ,红外光谱 (IR) ,扫描电镜 (SEM)等方法对薄膜的组成、结构、颗粒尺寸、形貌及厚度进行了研究 ,通过发光光谱对薄膜的发光性质进行了分析。XRD结果表明 70 0℃时薄膜尚处于非晶态 ,80 0℃时已开始有Ca2 Y8(SiO4 ) 6 O2 的物相形成 ,10 0 0℃时结晶已完全。这一点和红外光谱的结果相符。发光光谱测试表明Ca2 Y8(SiO4 ) 6 O2 ∶Eu3 薄膜显示了很强的红光发射 ,并以Eu3 的5D0 -7F2 (616nm)超灵敏跃迁为最强一组。Ca2 Y8(SiO4 ) 6 O2 ∶Tb3 的发射光谱由蓝光发射和绿光发射两部分组成 ,前者对应于5D3-7FJ,后者对应于5D4 -7FJ(J =6,5 ,4,3 ) ,且以5D4 -7F5(5 44nm)绿光发射为最强。     

紫外激发Sr1-x-yMgP2O7:xCe3+,yTb3+荧光粉的发光特性及能量传递

采用高温固相法合成了Sr1-x-yMgP2O7:xCe3+,yTb3+荧光粉.研究了荧光粉的晶体结构、发光特性、荧光寿命、能量传递机理和荧光粉的热稳定性.研究结果表明:在SrMgP2O7基质中,Ce3+的发射峰值为398nm,Tb3+的主发射峰值为545nm,它们分别属于5d-4f跃迁和5D4→7F5跃迁.Ce3+和Tb3+共掺时,Ce3+和Tb3+通过电偶极子-电偶极子相互作用发生能量传递,能量传递的临界距离为0.614nm.通过计算得到单掺杂Ce3+、Tb3+时热猝灭过程的激活能分别为0.122和0.111eV,Tb3+离子的发光热稳定性比Ce3+离子的好.     

Sm~(3+)掺杂(Y,Tb)AG:Ce~(3+)荧光粉的制备及光谱性能

采用柠檬酸溶胶凝胶燃烧合成法制备了一系列组成的(Y,Tb)3Al5O12:Ce3+,Sm3+荧光粉。通过X射线衍射、荧光光谱研究了不同Sm3+离子共掺杂浓度下(Y,Tb)AG:Ce3+荧光粉的晶体结构及光致发光性能。Rietveld全图拟合(Rietveld method of wholepattern fitting)结果表明:掺杂后样品仍为纯立方石榴石相,随着Sm3+离子共掺杂浓度的增加,样品的晶胞参数增大。在467 nm激发下,激发能由Ce3+离子向Sm3+离子单向传递,从而在617nm处出现红光发射。Tb3+离子取代不利于Ce3+离子与Sm3+离子的能量传递,同时Ce3+离子受更强的晶体场作用及与O2-离子间增强的共价性使发射主峰红移,Sm3+掺杂的TAG:Ce体系中,激发能由敏化剂Ce3+离子向激活剂Sm3+离子的传递路径包括5d→4f2F5/2,7/2(Ce3+)和7F6→5D4(Tb3+)到4G5/2→6H7/2(Sm3+)两部分。     

Luminescence properties of sol-gel derived silica gels doped and undoped with RE-complexes(RE=Eu,Tb)

The luminescence properties of silica gels and silica gels doped with two rare earth complexes,Eu(TTA)3 and Tb(o-CBA)3 (TTA=thenoyltrifluocetate,o-CBA=o-chlorobenzoic acid) are reported and discussed.Pure silica gels show a blue luminescence,and the maximum excitation and emission wavelengths depend strongly on the solvents used.Both of the studied rare earth complexes exhibit the characteristic emissions of the rare earth ions in silica gels,i.e.,Eu3+5 Do→7 FJ(J=0,1,2,3,4),Tb3+5D4→7FJ(J=3,4,5,6) transitions.Compared with the pure RE-complexes powder,the silica gels doped with RE-complexes show fewer emission lines of the rare earth ions.Furthermore the rare earth ion (Tb3+) presents a longer lifetime (1346μs) in silica gel doped with Tb(o-CBA)3 than in pure Tb(o-CBA)3 powder (744μs).The reasons responsible for these results are discussed in the context.     

Ce和Dy在Cd0.5Zn0.5B4O7中的发光特性及能量双向传递

采用高温固相法制备了白蓝光双发射为一体的Cd0.5Zn0.5B4O7∶Ce/Dy系列发光材料. 由XRD测得Cd0.41Zn0.5B4O7∶Ce0.04/Dy0.02的晶胞参数: a=1.3885 nm, b=0.8020 nm, c=0.8670 nm, 属于正交晶系, Pbca空间群. 在Ce/Dy双掺的体系中存在Ce3+和Dy3+两种发光中心, 254~350 nm激发主要是Dy3+的 4F9/2→6H15/2和4F9/2→6H13/2跃迁发射, 而355—390 nm激发主要为Ce3+的5d→4f跃迁发射. 340 nm激发Ce/Dy双掺发光体的发射强度是同浓度Dy3+单掺的31倍, Ce3+是Dy3+的高效敏化剂, 而355—390 nm激发Dy3+是Ce3+的敏化剂. 体系中存在少见的Ce3+→Dy3+与Dy3+→Ce3+的能量双向传递.     

Sr2MgSi2O7∶Tb3+，Li+荧光粉的合成和发光机理

采用高温固相法合成Sr2-mMg1-nSi2O7∶mTb3+,nLi+(m=0.03~0.50,n=m)系列荧光粉。使用X射线衍射仪和荧光光谱仪对样品的物相和发光性质进行了表征。在377 nm紫外光激发下,荧光粉的发射光谱呈多谱带发射,主峰位于490 nm,542 nm,590 nm和613 nm处,分别对应于Tb3+的5D4→7FJ(J=6,5,4,3)跃迁发射。调节Tb3+离子掺杂浓度,可实现荧光粉的发光颜色从蓝到白、黄、绿的可调发射;名义组成为Sr1.95Mg0.95Si2O7∶0.05Tb3+,0.05Li+的荧光粉在紫外光(377 nm)激发下发白光,其色坐标(0.322,0.317)接近纯白光(0.33,0.33),是一种潜在的LED用单基质白光荧光粉。     

Highly uniform and monodisperse beta-NaYF(4):Ln(3+) (Ln = Eu, Tb, Yb/Er, and Yb/Tm) hexagonal microprism crystals: hydrothermal synthesis and luminescent properties

beta-NaYF4:Ln3+ (Ln = Eu, Tb, Yb/Er, and Yb/Tm) hexagonal microprisms with remarkably uniform morphology and size have been synthesized via a facile hydrothermal route. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), and photoluminescence (PL) spectra as well as kinetic decays were used to characterize the samples. It is found that sodium citrate as a shape modifier introduced into the reaction system plays a critical role in the shape evolution of the final products. Furthermore, the shape and size of the products can be further manipulated by adjusting the molar ratio of citrate/RE3+ (RE represents the total amount of Y3+ and the doped rare earth elements such as Eu3+, Tb3+, Yb3+/Er3+, or Yb3+/Tm3+). Under the excitation of 397 nm ultraviolet light, NaYF4:xEu3+ (x = 1.5, 5%) shows the emission lines of Eu3+ corresponding to 5D0-3 --> 7FJ (J = 0-4) transitions from 400 to 700 nm (whole visible spectral region) with different intensity, resulting in yellow and red down-conversion (DC) light emissions, respectively. When doped with 5% Tb3+ ions, the strong DC fluorescence corresponding to 5D4 --> 7FJ (J = 6, 5, 4, 3) transitions with 5D4 --> 7F5 (green emission at 544 nm) being the most prominent group that has been observed. In addition, under 980 nm laser excitation, the Yb3+/Er3+- and Yb3+/Tm3+-codoped beta-NaYF4 samples exhibit bright green and whitish blue up-conversion (UC) luminescence, respectively. The luminescence mechanisms for the doped lanthanide ions were thoroughly analyzed.     

(2-羧基苯氧基)苯-1,2-二羧酸构筑的镧系配合物对苯甲醛和阳离子的荧光传感

采用水热法合成了5个稀土配合物[Sm₂(bdbc)₂(phen)₄](1)和[Ln(bdbc)(phen)(H₂O)][Ln=Eu(2), Gd(3), Tb(4), Dy(5), bdbc=(2-羧基苯氧基)苯-1,2-二羧酸根, phen=1,10-邻菲啰啉]. 配合物1是双核分子, 通过氢键和C—H…π作用进一步构筑成一维超分子结构; 配合物2~5是同构的一维双螺旋结构, 通过氢键和C—H…π作用进一步构筑成三维超分子结构. 配合物1, 2, 4和5呈现了Sm³⁺, Eu³⁺, Tb³⁺和Dy³⁺离子的特征发射, 分别对应于Sm³⁺离子的⁴G_5/2→⁶H_J/2(J=5, 7, 9)、 Eu³⁺离子的⁵D₀→⁷F_J(J=1—4)、 Tb³⁺离子的⁵D₄→⁷F_J(J=6, 5, 4, 3)和Dy³⁺离子的⁴F_5/2→⁶H_J/2(J=15, 13)跃迁. 对配合物4的荧光性质进行了表征, 结果表明, 配合物4可用作荧光探针以检测阳离子和苯甲醛.     

YF3:Ln3+ (Ln = Ce, Tb, Pr) submicrospindles: hydrothermal synthesis and luminescence properties

YF(3):Ln(3+) (Ln = Ce, Tb, Pr) microspindles were successfully fabricated by a facile hydrothermal method. X-Ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), lifetimes, photoluminescence (PL) and low-voltage cathodoluminescence (CL) were used to characterize the resulting samples. The lengths and diameters of YF(3):0.02Ce(3+) microspindles are around 760 nm and 230 nm, respectively. Adding dilute acid and trisodium citrate (Cit(3-)) are essential for obtaining YF(3) microspindles. A potential formation mechanism for YF(3) microspindles has been presented. PL spectroscopy investigations show that YF(3):Ce(3+) and YF(3):Tb(3+) microcrystals exhibit the characteristic emission of Ce(3+) 5d → 4f and Tb(3+ 5)D(4)→(7)F(J) (J = 6-3) transitions, respectively. In addition, the energy transfer from Ce(3+) to Tb(3+) was investigated in detail for YF(3):Ce(3+), Tb(3+) microspindles. Under the excitation of electron beams, YF(3):Pr(3+) show quantum cutting emission and YF(3):Ce(3+), Tb(3+) phosphors exhibit more intense green emission than the commercial phosphor ZnO:Zn.     

Microwave-assisted synthesis of hydrophilic BaYF5:Tb/Ce,Tb green fluorescent colloid nanocrystals

Hydrophilic Ce, Tb doped BaYF(5) nanocrystals with uniform size were synthesized by a microwave-assisted route. The synthesized nanocrystals can be well dispersed in hydrophilic solutions (DMSO, DMF, EG, H(2)O). This synthesis procedure represents a less time consuming method, with high product yield and without using any assistant or/and template reagents, which may be expected to be a general method for rapid synthesis of other hydrophilic RE doped fluoride fluorescent nanocrystals. The Ce(3+), Tb(3+) codoped BaYF(5) nanocrystals show bright green fluorescence emission. The Ce(3+) acts as an effective energy transfer medium and the emission at the high (5)D(3) energy level of Tb is enhanced in this host material.     

Electrospinning synthesis and luminescence properties of one-dimensional La(9.33)(SiO4)6O2: Ln3+ (Ln = Ce, Eu, Tb) microfibers

One-dimensional La(9.33)(SiO(4))(6)O(2): Ln(3+) (Ln = Ce, Eu, Tb) microfibers were fabricated by a simple and cost-effective electrospinning method. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), photoluminescence (PL) and low voltage cathodoluminescence (CL) as well as kinetic decay were used to characterize the resulting samples. SEM and TEM results indicated that the diameter of the microfibers annealed at 1000 °C for 3 h was 200-245 nm. The microfibers were further composed of fine and closely linked nanoparticles. La(9.33)(SiO(4))(6)O(2): Ln(3+) (Ln = Ce, Eu, Tb) phosphors showed the characteristic emission of Ce(3+) (5d → 4f), Eu(3+) ((5)D(0)→(7)F(J)) and Tb(3+) ((5)D(3,4)→(7)F(J)) under ultraviolet excitation and low-voltage electron beams (3-5 kV) excitation. An energy transfer from Ce(3+) to Tb(3+) was observed in the La(9.33)(SiO(4))(6)O(2): Ce(3+), Tb(3+) phosphor under ultraviolet excitation and low-voltage electron beam excitation. Luminescence mechanisms were proposed to explain the observed phenomena. Blue, red and green emission can be realized in La(9.33)(SiO(4))(6)O(2): Ln(3+) (Ln = Ce, Eu, Tb) microfibers by changing the doping ions. So the La(9.33)(SiO(4))(6)O(2): Ln(3+) (Ln = Ce, Eu, Tb) phosphors have potential applications in full-color field emission displays.     

Cd2Ge7O16中Tb的长余辉发光特性

本文研究了Cd₂Ge₇O₁₆∶Tb³⁺材料的发光及其长余辉性质。指出Tb³⁺的发光是该离子的 ⁵D₃- ⁷D_J、 ⁵D₄- ⁷D_J两种跃迁产生的；随着掺杂浓度的增加 ⁵D₄- ⁷D_J跃迁增强，发光颜色由蓝变绿。并把该材料的长余辉性质归结为基质结构中有电子陷阱和空穴陷阱。提出余辉机理模型。