首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 171 毫秒
1.
设计合成了含离子液体的吡啶配体1,2-二甲基-3-乙氧基吡啶六氟磷酸盐咪唑离子液体,在丙酮∶石油醚=3∶1的混合溶剂制备了含咪唑的离子液体.该离子液体可以做配体与Grubbs第二代催化剂反应,制备离子液体负载的钌催化剂,利用(1H,13C,31P)-NMR、元素分析等方法对合成的化合物和催化剂进行表征,催化剂中与钌连接的苯亚甲基上氢(RuCH—Ph)的振动峰由原来第二代催化剂的δ=19.2移至δ=16.27,在δ=-143.3处只出现PF6-中磷的信号峰,PCy3的信号消失,表明PCy3已经被置换完全,得到了新的催化剂.通过ICP测定含吡啶配体的离子液体负载的催化剂在混合物中的含量为14wt%.该催化剂在丙酮、甲醇、咪唑类离子液体等极性溶剂中易于溶解,解决了Grubbs催化剂在离子液体中不溶解的问题,实现了在纯离子液体中均相ROMP反应.考察了催化剂对不同极性单体在离子液体[BMIm]BF4中的开环易位聚合反应,非极性的环辛烯、含有中等极性取代基的5-羟基环辛烯单体以及含强极性取代基的5-腈基-2-降冰片烯单体的转化率分别为96%、73%和51.7%.利用凝胶渗透色谱(GPC)测定了聚合物的分子量及分子量分布.  相似文献   

2.
以废旧聚丙烯纤维为骨架,通过接枝苯乙烯、氯甲基化和负载N-(4-吡啶)哌嗪,合成了高分子(纤维)负载-N-(4-吡啶)哌嗪(1),其结构经IR和元素分析表征,并通过小分子模拟确证.1(5 mol%)用于催化1-苯基乙醇的乙酰化反应,收率90%,在多次循环使用后催化活性基本不变.  相似文献   

3.
负载型纳米贵金属催化剂催化吡啶及其衍生物的加氢反应   总被引:2,自引:0,他引:2  
薛芳  林棋  杨朝芬  李贤均  陈华 《催化学报》2006,27(10):921-926
 制备了负载型高分散的纳米贵金属催化剂和含Ru的双金属催化剂,并考察了催化剂对吡啶及其衍生物加氢反应的催化性能. 结果表明, 5%Ru/C催化剂对吡啶加氢反应的催化活性高于5%Pd/C, 5%Pt/C和5%Ir/C. 在100 ℃, 3.0 MPa, 1 h和Ru/吡啶摩尔比=2.5/1000 的条件下, 5%Ru/C催化吡啶加氢的转化率大于99.9%, 生成哌啶的选择性为100%. 催化剂重复使用5次后,活性和选择性无明显下降. 在Ru催化剂中加入少量的Pd和Ir后催化剂活性没有明显的变化. 采用X射线衍射、高分辨透射电镜和X射线光电子能谱对还原后的5%Ru/C催化剂进行表征,结果表明Ru以高分散金属态存在,其平均粒径小于5 nm. 不同底物的加氢反应活性为: 吡啶≈2-甲基吡啶>2,6-二甲基吡啶>3-甲基吡啶>4-甲基吡啶>3,5-二甲基吡啶>2-甲氧基吡啶.  相似文献   

4.
 制备了交联聚4-乙烯基吡啶及碘甲烷,溴乙烷季铵化的聚4-乙烯基吡啶负载钯催化剂,考察了它们催化丙烯酸甲酯加氢反应的性能。对碘甲烷季铵化聚4-乙烯基吡啶负载钯催化剂,其催化加氢活性随载体季铵化程度的增加而减小,并且当载体季铵化程度低于80%时,其催化加氢活性比聚4-乙烯基吡啶负载催化剂高。实验结果表明催化剂制备条件对催化性能有很大影响。  相似文献   

5.
合成了离子液体负载的钌催化剂, 考察了该催化剂在离子液体中对极性环烯烃单体的开环易位聚合(ROMP)反应规律. 首先设计合成含离子液体的吡啶配体1,2-二甲基-3-己氧基吡啶六氟磷酸盐咪唑离子液体配体, 利用其与Grubbs第二代催化剂配位反应, 制备离子液体负载的钌催化剂, 通过1H, 13C NMR等方法对合成的化合物和催化剂进行表征. 催化剂中与钌连接的苯亚甲基上氢(RuCH—Ph) 的振动峰由原来Grubbs第二代催化剂的δ 19.2移至δ 18.6, 表明得到了新的催化剂, ICP测定催化剂混合物中纯催化剂的质量分数为36.2%. 该催化剂易溶于丙酮、甲醇及咪唑类离子液体等极性溶剂, 解决了Grubbs催化剂不溶于离子液体的问题, 实现了在纯离子液体中均相ROMP反应. 考察了催化剂对极性单体5-羟基环辛烯在离子液体[BMIm]BF4中的ROMP反应规律, 研究了离子液体中ROMP反应动力学.  相似文献   

6.
制备了交联聚4-乙烯基吡啶及碘甲烷,溴乙烷季铵化的聚4-乙烯基吡啶负载钯催化剂,考察了它们催化丙烯酸甲酯加氢反应的性能。对碘甲烷季铵化聚4-乙烯基吡啶负载钯催化剂,其催化加氢活性随载体季铵化程度的增加而减小,并且当载体季铵化程度低于80%时,其催化加氢活性比聚4-乙烯基吡啶负载催化剂高。实验结果表明催化剂制备条件对催化性能有很大影响。  相似文献   

7.
高氯酸锂促进的固体酸催化酯化反应   总被引:3,自引:0,他引:3  
王丽琼  聂进  李小永  张正波  尹飞 《有机化学》2004,24(7):778-782,J003
将二(三氟甲基磺酰)亚胺镱(Ⅲ)[Yb(NTf2)3]负载于NKC-9树脂上得到一种催化活性更高的酯化固体酸催化剂,发现高氯酸锂能够显著加速固体酸催化剂酯化反应速度,在不分水,相对于苯甲酸负载树脂用量30 wt%,Yb(NTf2)3用量0.8mol%,LiClO4用量58 mol%,n(苯甲酸):n(乙醇)=1:7的条件下,2 h内即可使苯甲酸与乙醇的直接酯化反应进行完全.同时研究了负载量、温度、高氯酸锂用量对苯甲酸酯化反应的影响.  相似文献   

8.
采用环境友好的水溶性富勒烯负载PdCl_2纳米催化剂[C_(60)-TEG_S/PdCl_2]催化邻溴苯腈和对甲基苯硼酸合成沙坦联苯(2-氰基-4′-甲基联苯)。该反应选用绿色溶剂水为反应溶剂,并分别考察了催化剂用量、反应温度、反应时间、碱的种类以及碱量对收率的影响。催化剂量为0.01 mol%,以2 mmol K_2CO_3作为碱,室温纯水中反应4 h产率能够达到93.6%。催化剂循环利用5次后,催化活性没有明显下降。  相似文献   

9.
利用X-光电子能谱、紫外-可见光谱、电子显微镜等技术研究了硅胶负载的聚乙烯吡啶-聚[苯乙烯-顺丁烯二酸]-钯催化剂的结构.发现催化剂中活性组分除钯(0)外,还存在少量钯(Ⅱ).第二种高分子的存在可以影响钯(Ⅱ)的相对含量.催化剂中钯以很小的粒子均匀分布在载体上,因此具有良好的催化加氢性能.  相似文献   

10.
陈静  傅宏祥等 《分子催化》2001,15(2):146-148
在用于羰基合成的钴催化剂中加入适当的配合物或离子 ,可以提高其稳定性并改善反应产物的正 /异比 . Mastuda等人 [1,2 ] 首次用吡啶修饰的羰基钴催化剂体系催化丙烯和丁二烯的羰化酯基化反应 ,并提出可以用喹啉代替吡啶 . 1 980年 ,Kojima等人[3 ] 在较温和的反应条件下 ,将几种含烯醇结构的含氮杂环化合物用于乙烯的氢甲酰化反应中 ,得到了较好的结果 .同时 ,Schaefer[4 ]以辛烯为底物 ,较为详细地研究了钴 /吡啶催化剂体系对烯烃氢酯基化反应的作用 ,以及不同吡啶 /钴摩尔比对产物分布的影响 .在此期间 ,除了对吡啶作配体的钴催化剂有…  相似文献   

11.
A newly designed PE-supported arsine has been developed as an excellent catalyst for catalytic Wittig-type olefination. Simple ketones, in particular inactive ketones prove to be suitable substrates for the first time. This reaction provides an easy access to di-, tri-, and tetra-substituted olefins in high yield.  相似文献   

12.
Solid phase synthesis of poly(propylene imine) dendrimer is described. An iterative synthesis including double Michael addition of acrylonitrile to the primary amino groups on crosslinked polystyrene support followed by reduction of nitrile groups to amino groups give poly(propylene imine) dendrimers up to third generation attached to the polystyrene support. The supported dendrimer is used as an organocatalyst to Knoevenagel condensations. The supported catalyst showed good selectivity and the product was obtained in excellent yield under green reaction conditions. Densely packed amino groups enhance catalysis by a co-operative effect. The catalyst is recoverable and reusable.  相似文献   

13.
A magnetically recoverable catalyst [Fe3O4@SiO2-AEAPTMS-Pd(II)] was prepared, fully characterized and had its catalytic activity evaluated on the Suzuki cross-coupling reaction under microwave irradiation. The reaction conditions for the synthesis of biaryl compounds was optimized in two stages - an initial fractional design 24, in which the parameters reaction time, temperature, solvent and catalyst loading were evaluated, followed by a Doehlert design. The factorial design proved to be a viable approach for obtaining the optimal reaction conditions based on a relatively small number of experiments. Additionally, the biaryl derivatives synthesized by this method were obtained with good to excellent yields (71–96%) and the recovery and reuse of the palladium catalyst was also evaluated.  相似文献   

14.
Various types of aromatic and aliphatic sulfides are selectively oxidized to sulfoxides and sulfones in good to excellent yields using 30% H2O2 in the presence of catalytic amounts of a novel recoverable silica-based tungstate interphase catalyst at room temperature. The catalyst can be recovered and reused for at least eight reaction cycles under the described reaction conditions without considerable loss of reactivity. [reaction: see text]  相似文献   

15.
刘丹  祝方明  林尚安 《高分子学报》2008,(12):1129-1134
以MgCl2/AlEtn(OEt)3-n为载体,分别负载五甲基茂基三氯化钛(Cp*TiCl3)和五甲基茂基三苄氧基钛(Cp*Ti(OBz)3),得到两种负载催化剂,在较廉价的AlEt2Cl为助催化剂常压下可以高效地催化乙烯聚合.报道了载体的制备、聚合条件(不同的烷基铝助催化剂、聚合温度、铝钛摩尔比)对催化剂的聚合行为以及聚合物结构的影响.研究结果表明,两种负载催化体系对乙烯聚合具有较高的催化活性,可达105g PE/(molTi·h)数量级,所得聚乙烯的黏均分子量在105以上.经过13C-NMR和DSC分析,两种负载催化剂得到的均为线型聚乙烯.与均相催化剂相比,负载后的单茂钛催化体系的聚合反应动力学表现高效而平稳.这表明载体的微孔结构使活性中心得到了有效的分散,有效地提高了催化剂的活性,同时载体的受限空间有效抑制了聚乙烯增长链的β-H消除反应.  相似文献   

16.
A series of polystyrene-divinylbenzene cross-linked resin (PS)–supported zinc chloride catalysts were prepared in this study. They can efficiently catalyze the solventless cycloaddition of cyclohexene oxide with carbon dioxide in the presence of tetrabutylammonium bromide (TBAB) as cocatalyst under relatively mild reaction conditions. The catalyst is composed of carrier, connecting arm, ligand, and active ingredient. The connecting arms of different lengths can significantly affect the catalytic activity. Among these catalysts, the one using diethylene glycol as connecting arm and 2-aminopyridine as ligand, named PS-DEG-2ap-ZnCl2, showed the optimal catalytic performance. The yield of cyclohexene carbonate was 95.18% calculated by gas chromatographic analysis under the optimal conditions (393 K, 5 MPa, 6 h). Moreover, the catalyst showed good stability and reusability. From the viewpoint of industrial application, the catalyst is attractive because of its excellent catalytic efficiency on the synthesis of cyclohexene carbonate.  相似文献   

17.
Two kinds of catalysts of peroxotungstates immobilized on ionic liquid-modified silica have been synthesized and characterized. By comparing with other heterogeneous catalysts, the most characteristic of these heterogeneous catalysts is the catalyst formed from the combination of catalytic active center peroxotungstate with an ionic liquid. Thereinto, ionic liquid-modified supported catalysts provide the hydrophobic environment for organic reactions. We presume that the heterogeneous catalyst would display excellent catalytic ability depending on the additive effect of an ionic liquid and peroxotungstate. Their catalytic properties in oxidation of sulfides to sulfoxides and sulfones were investigated with 30% aqueous hydrogen peroxide at room temperature. These recoverable catalysts both exhibit high catalytic activities in the oxidation reaction of sulfoxides and provide excellent chemselectivities towards sulfur groups with unsaturated double bonds when the aqueous hydrogen peroxide was greatly in excess. The yields of methyl phenyl sulfoxide were still satisfied when the catalyst was reused for a sixth time.  相似文献   

18.
A highly efficient, easily recoverable and reusable Fe3O4 magnetic nanoparticle‐supported Cu(I) catalyst has been developed for the synthesis of quinazolinones and bicyclic pyrimidinones. In the presence of supported Cu(I) catalyst (10 mol%), amidines reacted with substituted 2‐halobenzoic acids and 2‐bromocycloalk‐1‐enecarboxylic acids to generate the corresponding N‐heterocycle products in good to excellent yields at room temperature in DMF. In addition, the supported Cu(I) catalyst could be recovered at least 10 times without significant loss of its catalytic activity. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

19.
Summary: Star‐like polystyrenes composed of a microgel core with arms functionalized with a few hydroxy‐ or methoxy‐ended ethylene oxide units were used as organic supports for a tridentate bis(imino)pyridinyliron catalyst towards ethylene polymerization. When used as supports of 2,6‐bis[1‐2,6(diisopropylphenyl)imino]ethylpyridynyl iron dichloride in the presence of various alkylaluminium compounds, the supported catalysts enabled the production, with a high catalytic activity, of polyethylene beads of a spherical morphology and high bulk density. A good control of the polyethylene molar mass distribution could also be achieved, which was explained by a lowering of the transfer reaction to the aluminium derivative, as compared to homogeneous conditions.

SEM image of PE particles prepared in the presence of trimethylaluminium supported on a PS microgel with an iron catalyst (TMA/Fe = 800).  相似文献   


20.
Xylan-type hemicelluloses supported terpyridine–palladium(II) as a novel biomass-supported catalyst was synthesized and characterized in terms of morphology, composition, and thermal stability. The nano-Pd catalyst was further explored for Suzuki–Miyaura reaction between arylboronic acid and aryl halide under aerobic condition, with a yield up to 98 %. In particular, the catalyst exhibited both high catalytic activity and stability for Suzuki–Miyaura reaction. Furthermore, the catalyst could be easily recovered by simple filtration and reused at least six times without significant loss of its catalytic activity. This work provides a novel and effective supported catalyst, and broadens the applications of polysaccharides in green catalysis.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号