Determination of dissolved naphthenic acids in natural waters by using negative-ion electrospray mass spectrometry

Naphthenic acids (NAs) have been implicated as some of the most toxic substances in oil sands leachates and identified as priority substances impacting on aquatic environments. As a group of compounds, NAs are not well characterized and comprise a large group of saturated aliphatic and alicyclic carboxylic acids found in hydrocarbon deposits (petroleum, oil sands bitumen, and crude oils). Described is an analytical method using negative-ion electrospray ionization mass spectrometry (ES/MS) of extracts. Preconcentration was achieved by using a solid-phase extraction procedure utilizing a crosslinked polystyrene-based polymer with acetonitrile elution. Recovery of the Fluka Chemicals NA mixture was highly pH-dependent, with 100% recovery at pH 3.0, but only 66 and 51% recoveries at pHs 7 and 9, respectively. The dissolved phase of the NA was very dependent on sample pH. It is thus critical to measure the pH and determine the appropriate mass profiles to identify NAs in natural waters. The ES/MS analytical procedure proved to be a fast and sensitive method for the recovery and detection of NAs in natural waters, with a detection limit of 0.01 mg/L.     

Comparison of high- and low-resolution electrospray ionization mass spectrometry for the analysis of naphthenic acid mixtures in oil sands process water

The oil sands regions of Northern Alberta, Canada, contain an estimated 1.7 trillion barrels of oil in the form of bitumen, representing the second largest deposit of crude oil in the world. A rapidly expanding industry extracts surface-mined bitumen using alkaline hot water, resulting in large volumes of oil sands process water (OSPW) that must be contained on site due to toxicity. The toxicity has largely been attributed to naphthenic acids (NAs), a complex mixture of naturally occurring aliphatic and (poly-)alicyclic carboxylic acids. Research has increasingly focused on the environmental fate and remediation of OSPW NAs, but an understanding of these processes necessitates an analytical method that can accurately characterize and quantify NA mixtures. Here we report results of an interlaboratory comparison for the analysis of pure commercial NAs and environmental OSPW NAs using direct injection electrospray ionization mass spectrometry (ESI-MS) and high-pressure liquid chromatography/high-resolution mass spectrometry (HPLC/HRMS). Both methods provided very similar characterization of pure commercial NA mixture; however, the m/z selectivity of HPLC/HRMS was essential to prevent substantial false-positive detections and misclassifications in OSPW NA mixtures. For a range of concentrations encompassing those found in OSPW (10-100 mg/L), both methods produced linear response, although concentrations of commercial NAs above 50 mg/L resulted in slight non-linearity by HPLC/HRMS. A three-fold lower response factor for total OSPW NAs by HPLC/HRMS was largely attributable to other organic compounds in the OSPW, including hydroxylated NAs, which may explain the substantial misclassification by ESI-MS. For the quantitative analysis of unknown OSPW samples, both methods yielded total NA concentrations that correlated with results from Fourier transform infrared (FTIR), but the coefficients of determination were not high. Quantification by either MS method should therefore be considered semi-quantitative at best, albeit either method has substantial value in environmental fate experiments where relative concentration changes are the desired endpoints rather than absolute concentrations.     

Electrospray ionization mass spectrometry studies of cyclodextrin‐carboxylate ion inclusion complexes

Aqueous solutions containing simple model aliphatic and alicyclic carboxylic acids (surrogates 1–4) were studied using negative ion electrospray mass spectrometry (ESI‐MS) in the presence and absence of α‐, β‐, and γ‐cyclodextrin. Molecular ions were detected corresponding to the parent carboxylic acids and complexed forms of the carboxylic acids; the latter corresponding to non‐covalent inclusion complexes formed between carboxylic acid and cyclodextrin compounds (e.g., β‐CD, α‐CD, and γ‐CD). The formation of 1:1 non‐covalent inclusion cyclodextrin‐carboxylic complexes and non‐inclusion forms of the cellobiose‐carboxylic acid compounds was also observed. Aqueous solutions of Syncrude‐derived mixtures of aliphatic and alicyclic carboxylic acids (i.e. naphthenic acids; NAs) were similarly studied using ESI‐MS, as outlined above. Molecular ions corresponding to the formation of CD‐NAs inclusion complexes were observed whereas 1:1 non‐inclusion forms of the cellobiose‐NAs complexes were not detected. The ESI‐MS results provide evidence for some measure of inclusion selectivity according to the 'size‐fit' of the host and guest molecules (according to carbon number) and the hydrogen deficiency (z‐series) of the naphthenic acid compounds. The relative abundances of the molecular ions of the CD‐carboxylate anion adducts provide strong support for differing complex stability in aqueous solution. In general, the 1:1 complex stability according to hydrogen deficiency (z‐series) of naphthenic acids may be attributed to the nature of the cavity size of the cyclodextrin host compounds and the relative lipophilicity of the guest. Copyright © 2009 John Wiley & Sons, Ltd.     

Attempt to unravel the composition of toxaphene by comprehensive two-dimensional gas chromatography with selective detection

Comprehensive two-dimensional gas chromatography (GC x GC) coupled with micro electron-capture and time-of-flight mass spectrometric (TOF-MS) detection has been used to analyse technical toxaphene. An HP-1 x HT-8 column combination yielded highly structured chromatograms and revealed a complex mixture of over 1000 compounds what is significantly higher number than in any study before. The analysis of a mixture of 23 individual congeners and TOF-MS evaluation of technical toxaphene showed that the chromatogram is structured according to the number of chlorine substituents in a molecule. The nature of the compounds (bornane and camphene) does not appear to have any influence. The sum of the peak areas of all congeners in each group was calculated using laboratory-written software; based on these results, the composition of technical toxaphene as a function of the number of chlorine substituents was provisionally calculated and was found that hepta- and octachlorinated compounds represents 75% of the total toxaphene area.     

Identification of individual acids in a commercial sample of naphthenic acids from petroleum by two-dimensional comprehensive gas chromatography/mass spectrometry

The identification of most individual members of the complex mixtures of carboxylic acids found in petroleum ('naphthenic acids') has eluded chemists for over a century; they remain unresolved by conventional gas chromatographic methods. Recently, however, we successfully used two-dimensional comprehensive gas chromatography/mass spectrometry to identify numerous individual diamondoid acids in the naphthenic acids of oil sands process water (OSPW). We have now applied the same methods to a study of a mixture of commercially available naphthenic acids originally refined from petroleum. The results confirm that OSPW and refined petroleum contain very different distributions of acids, as noted previously, although some of the diamondoid acids recently identified in OSPW were detectable in both. Rather, two-dimensional comprehensive gas chromatography/time-of-flight mass spectrometry (GCxGC/ToF-MS) of the methyl esters of the petroleum acids and of numerous acids synthesised for comparison showed that the former comprised mainly C(8-18) straight-chain, methyl-branched, acyclic isoprenoid, cyclohexyl and isomeric octahydropentalene, perhydroindane and perhydronaphthalene (decalin) acids. Some of the latter bicyclic acids occurred as both the non-alkyl-substituted isomers and the bicyclic ethanoic and propanoic acids. Also present in minor quantities was a range of phenyl carboxylic and substituted phenyl alkanoic acids, and traces of non-acids, including trimethylnaphthalenes, again identified by comparison with the synthesised compounds. These results represent some of the first identifications of multiple individual naphthenic acids in commercial mixtures originating from petroleum and provide a basis for future studies of the petroleum geochemistry, toxicities and environmental impacts of the acids. Furthermore, characterisation of the acids will be important for improving the understanding of the role of naphthenic acids in petroleum engineering, particularly for oil pipeline deposition problems.     

Separation of technical 4-nonylphenols and their biodegradation products by comprehensive two-dimensional gas chromatography coupled to time-of-flight mass spectrometry

Comprehensive two-dimensional gas chromatography (GC x GC) coupled to time-of-flight mass spectrometry (TOF-MS) was applied to improve the separation of 4-nonylphenol isomers and their biodegradation products. The structurally similar nonylphenol isomers were separated by combining a 30 m long semi-polar column and a short polar capillary. Both were coupled via a custom-made liquid nitrogen cryogenic modulator. The advanced GC resolution of coeluting isomers, additionally supported by fast scanning TOF-MS, provided clearer, non-interfered mass spectra of individual isomers. Thus, identification of components is facilitated as shown for isomeric 4-nonylphenols and metabolites of their biodegradation by Clavariopsis aquatica, an aquatic fungus. GC x GC-TOF-MS analysis enabled the separation of about 40 alkylphenol isomers included in technical 4-nonylphenol. During biodegradation the variety of emerging compounds increased with longer reaction time. The comprehensive analysis indicated a broad spectrum of hydroxylated, carboxylated nonylphenolisomers and additionally, chlorinated aromatic compounds produced and released from the fungal culture.     

Evaluation of the analyses of tert-butyldimethylsilyl derivatives of naphthenic acids by gas chromatography-electron impact mass spectrometry

Naphthenic acids are a complex mixture of carboxylic acids with the general formula CnH(2n+Z)O2 and they are natural, toxic components of crude oils. GC-MS analyses of tert-butyldimethylsilyl esters of naphthenic acids are used to estimate component distribution within naphthenic acids mixtures. Our evaluations of the GC-MS method showed that ions from column bleed erroneously appear as C14 Z = -4 acids and that correcting for heavy isotopes of C and Si do not significantly affect ion distribution plots. Overall, the GC-MS method appears to overestimate the relative proportion of low-molecular-mass acids.     

Molecular profiling of naphthenic acids in technical mixtures and oil sands process‐affected water using polar reversed‐phase liquid chromatography–mass spectrometry

In this work, a reversed‐phase ultra‐HPLC (UHPLC) ultrahigh resolution MS (UHRMS) method was evaluated for the comprehensive profiling of NAs containing two O atoms in each molecule (O2NAs; general formula C_nH_{2n + z}O₂, where n is the number of carbon atoms and z represents hydrogen deficiency). Using a polar cyanopropyl‐bonded phase column and negative‐ion electrospray ionization mass spectrometric detection at 120,000 FWHM (m/z 400), 187 and 226 O2NA species were found in two naphthenic acid technical mixtures, and 424 and 198 species with molecular formulas corresponding to O2NAs were found in two oil sands process‐affected water samples (one from a surface mining operation and the other from a steam‐assisted gravity drainage operation), respectively. To our knowledge, these are the highest numbers of molecular compositions of O2NAs that have been profiled thus far in environmental samples. Assignments were based on accurate mass measurements (≤3 ppm) combined with rational molecular formula generation, correlation of chromatographic behavior of O2NA homologues with their elemental compositions, and confirmation with carboxyl group‐specific chemical derivatization using 3‐nitrophenylhydrazine. Application of this UHPLC–UHRMS method to the quantitation of O2NAs in the surface mining operation‐derived water sample showed excellent linearity (R² = 0.9999) with external calibration, a linear range of 256‐fold in concentration, and quantitation accuracies of 64.9 and 69.4% at two “standard substance” spiking levels.     

Carbohydrate-lipid interactions: affinities of methylmannose polysaccharides for lipids in aqueous solution

The interactions between 3-O-methyl-mannose polysaccharides (MMPs), extracted from Mycobacterium smegmatis (consisting of a mixture of MMP-10, -11, -12 and -13) or obtained by chemical synthesis (MMP-5(s) , -8(s) , -11(s) and -14(s) ), and linear saturated and unsaturated fatty acids (FAs), and a commercial mixture of naphthenic acids (NAs) in aqueous solution at 25?°C and pH?8.5 were quantified by electrospray ionization mass spectrometry (ESI-MS). Association constants (K(a) ) for MMP binding to four FAs (myristic acid, palmitic acid, stearic acid and trans-parinaric acid) were measured by using an indirect ESI-MS assay, the "proxy protein" method. The K(a) values are in the 10(4) -10(5) M(-1) range and, based on results obtained for the binding of the synthetic MMPs with palmitic acid, increase with the size of the carbohydrate. Notably, the measured affinity of the extracted MMPs for trans-parinaric acid is two orders of magnitude smaller than the reported value, which was determined by using a fluorescence assay. Using a newly developed competitive binding assay, referred to as the "proxy protein/proxy ligand" ESI-MS method, it was shown that MMPs bind specifically to NAs in aqueous solution, with apparent affinities of approximately (5×10(4) )?M(-1) for the mixture of NAs tested. This represents the first demonstration that MMPs can bind to hydrophobic species more complex than those containing linear alkyl/alkenyl chains. Moreover, the approach developed here represents a novel method for probing carbohydrate-lipid interactions.     

Comprehensive two-dimensional gas chromatography/time-of-flight mass spectrometry peak sorting algorithm

We report a novel peak sorting method for the two-dimensional gas chromatography/time-of-flight mass spectrometry (GC x GC/TOF-MS) system. The objective of peak sorting is to recognize peaks from the same metabolite occurring in different samples from thousands of peaks detected in the analytical procedure. The developed algorithm is based on the fact that the chromatographic peaks for a given analyte have similar retention times in all of the chromatograms. Raw instrument data are first processed by ChromaTOF (Leco) software to provide the peak tables. Our algorithm achieves peak sorting by utilizing the first- and second-dimension retention times in the peak tables and the mass spectra generated during the process of electron impact ionization. The algorithm searches the peak tables for the peaks generated by the same type of metabolite using several search criteria. Our software also includes options to eliminate non-target peaks from the sorting results, e.g., peaks of contaminants. The developed software package has been tested using a mixture of standard metabolites and another mixture of standard metabolites spiked into human serum. Manual validation demonstrates high accuracy of peak sorting with this algorithm.     

Langmuir films of naphthenic acids at different pH and electrolyte concentrations

Langmuir films of naphthenic acids at different pH and electrolyte concentrations are reported. The polydisperse naphthenic acids were commercially available, while two single-component naphthenic acids [5#(H)-cholanoic acid and 1-naphthalenepentanoic acid, decahydro- (9CI)] were synthesized. 1-naphthalenepentanoic acid, decahydro- is too water-soluble to form stable monolayers. 5#(H)-Cholanoic acid and Fluka naphthenic acid form stable films when cations are present in the aqueous subphase. At lower pH the cations are less influential since the naphthenic acids are not protolysed and metal naphthenates cannot be formed. pK_a^s for 5#(H)-cholanoic acid is determined to 5.65. The micellisation of the naphthenates at high pH is described.     

Evaluation of automated direct sample introduction with comprehensive two-dimensional gas chromatography/time-of-flight mass spectrometry for the screening analysis of dioxins in fish oil

An automated direct sample introduction technique coupled to comprehensive two-dimensional gas chromatography-time of flight mass spectrometry (DSI-GC x GC/TOF-MS) was applied for the development of a relatively fast and easy analytical screening method for 17 polychlorinated dibenzo-p-dioxins/dibenzofurans (PCDD/Fs) and 4 non-ortho polychlorinated biphenyls (PCBs) in fish oil. Comparison of instrumental performance between DSI-GC x GC/TOF-MS and the traditional gas chromatographic high resolution mass spectrometric (GC-HRMS) method showed good agreement of results for standard solutions analyzed in blind fashion. Relatively high tolerance of the DSI technique for lipids in the final extracts enabled a streamlined sample preparation procedure that only required gel permeation chromatography (GPC) and solid-phase extraction (SPE) cleanup with graphitized carbon black. The sample size for the method was 2g of cod liver oil, which achieved limits of quantitation (LOQs) of 0.019-7.8 pg/g toxic equivalent quotients for the individual PCDD/Fs. Lower detection limits can be achieved by using larger sample size and scaling up the sample preparation procedure, but this adds to the labor, time, solvent consumption, and expense of the approach. However, the streamlined method yielded 0.94 pg/g and 2.3 pg/g LOQs for 2,3,7,8-tetrachloro dibenzofuran (TCDF) and 3,3',4,4',5-pentachloro biphenyl (CB126), which were sufficiently low for regulatory monitoring of 2g samples. Therefore, instead of congener specific analysis, this streamlined analytical screening method for TCDF and CB126 has the potential to monitor fish oil contaminated with dioxin and dioxin-like PCBs at or above current food safety limits. Acceptable recoveries for nearly all analytes at three different spiking levels in fish oil samples were achieved with good repeatability.     

Dynamic ultrasound-assisted extraction of environmental pollutants from marine sediments for comprehensive two-dimensional gas chromatography with time-of-flight mass spectrometric detection

A dynamic ultrasound-assisted extraction (UAE) of marine sediments has been optimized using experimental design methodology. Comprehensive two-dimensional gas chromatography (GC x GC) using a cryogenic modulator, and time-of-flight-mass spectrometry (TOF-MS) were used to separate and identify environmental pollutants. Six compounds from three different chemical classes were used to optimize the extraction parameters.     

Improved determination of flavour compounds in butter by solid-phase (micro)extraction and comprehensive two-dimensional gas chromatography

The practicability and potential of comprehensive two-dimensional gas chromatography (GC x GC) coupled to both conventional flame ionisation (FID) and time-of-flight mass spectrometric (TOF-MS) detection, were compared with those of conventional one-dimensional (1D) GC, with the determination of flavour compounds in butter as an application. For polar flavour compounds, which were collected from the aqueous fraction of butter by means of solid-phase extraction (SPE), it was found that GC x GC dramatically improves the overall separation. Consequently, quantification and preliminary identification based on the use of ordered structures, can be performed more reliably. The improvement effected by replacing 1D-GC by GC x GC is considerable also in the case of TOF-MS detection, as illustrated by the high match factors generally obtained during identification. GC x GC was also used successfully for the characterisation of volatile flavour compounds in the headspace of butter collected by solid-phase microextraction (SPME) and to study the effect of heat treatment on the composition of butter samples in more detail.     

Analysis of tert-butyldimethylsilyl derivatives in heavy gas oil from Brazilian naphthenic acids by gas chromatography coupled to mass spectrometry with electron impact ionization

Naphthenic acids, C(n)H(2n+Z)O(2), are a complex mixture of alkyl-substituted acyclic and cycle-aliphatic carboxylic acids. The content of naphthenic acids and their derivatives in crude oils is very small, which hinders their extraction from matrixes of wide and varied composition. In this work, liquid-liquid extraction, followed by solid phase extraction with an ion exchange resin (Amberlyst A-27) and ultrasound desorption were used to isolate the acid fraction from heavy gas oil of Marlim petroleum (Campos, Rio de Janeiro, Brazil). The analysis was accomplished through gas chromatography coupled to mass spectrometry with electron impact ionization, after derivatization with N-methyl-N-(tert-butyldimethylsilyl)trifluoracetamide (MTBDMSTFA). The results indicate the presence of carboxylic acids belonging to families of alicyclic and naphthenic compounds which contain up to four rings in the molecule.     

Standardized test mixture for the characterization of comprehensive two-dimensional gas chromatography columns: the Phillips mix

A novel column characterization test mixture is developed for use in comprehensive two-dimensional gas chromatography (GC x GC). This mixture has been named the "Phillips mix" in honor of the late professor John B. Phillips, the father of GC x GC. The mixture comprises a series of homologous compounds from structural groups that cover a volatility and polarity range that is similar to the Grob mix, and includes saturated hydrocarbons (alkanes), unsaturated hydrocarbons (alkenes and alkynes), carbonyls (ketones and aldehydes), primary alcohols, fatty acid methyl esters, alkyl ethers, carboxylic acids, aromatics, as well as other unique functional groups (such as amines, etc.). Similarly to the Grob mix in conventional one-dimensional GC, the Phillips mix can be used as a standardized test for performance characterization of GC x GC column sets. Unlike the Grob mix, however, the Phillips mix's most important use is as a practical guideline for column users. This paper addresses some qualitative aspects of the use of the Phillips mix through an investigation of the chromatographic fingerprints of two different GC x GC column combinations.     

神木半焦粉末萃取物的组成特征

依次用石油醚、CS₂、CH₂Cl₂、丙酮和甲醇在索氏萃取器中萃取了神木半焦粉末,得到了五级萃取物(E_1-5)和最终的萃余物,总萃取率为1.76%。分别用气相色谱/质谱联用仪(GC/MS)、大气压固体探针/飞行时间质谱仪(ASAP/TOF-MS)和电喷雾电离/飞行时间质谱仪(ESI/TOF-MS)分析了各级萃取物。用GC/MS分析的结果表明,在E₁中C_15-24的直链烷烃和E₂中3与4环的芳烃比较丰富,在E_3-5中含杂原子有机化合物较丰富,特别是E₄和E₅中含氧有机化合物的含量最高。与用GC/MS分析的结果相比,用ASAP/TOF-MS和ESI/TOF-MS从E_3-5中检测出更多的含杂原子有机化合物。     

Multivariate selectivity as a metric for evaluating comprehensive two-dimensional gas chromatography-time-of-flight mass spectrometry subjected to chemometric peak deconvolution

Two-dimensional gas chromatography (GC x GC) coupled to time-of-flight mass spectrometry (TOFMS) [GC x GC-TOFMS)] is a highly selective technique well suited to analyzing complex mixtures. The data generated is information-rich, making it applicable to multivariate quantitative analysis and pattern recognition. One separation on a GC x GC-TOFMS provides retention times on two chromatographic columns and a complete mass spectrum for each component within the mixture. In this report, we demonstrate how GC x GC-TOFMS combined with trilinear chemometric techniques, specifically parallel factor analysis (PARAFAC) initiated by trilinear decomposition (TLD), results in a powerful analytical methodology for multivariate deconvolution. Using PARAFAC, partially resolved components in complex mixtures can be deconvoluted and identified without requiring a standard data set, signal shape assumptions or any fully selective mass signals. A set of four isomers (iso-butyl, sec-butyl, tert-butyl, and n-butyl benzenes) is used to investigate the practical limitations of PARAFAC for the deconvolution of isomers at varying degrees of chromatographic resolution and mass spectral selectivity. In this report, multivariate selectivity was tested as a metric for evaluating GC x GC-TOFMS data that is subjected to PARAFAC peak deconvolution. It was found that deconvolution results were best with multivariate selectivities over 0.18. Furthermore, the application of GC x GC-TOFMS followed by TLD/PARAFAC is demonstrated for a plant metabolite sample. A region of GC x GC-TOFMS data from a complex natural sample of a derivatized metabolic plant extract from Huilmo (Sisyrinchium striatum) was analyzed using TLD/PARAFAC, demonstrating the utility of this analytical technique on a natural sample containing overlapped analytes without selective ions or peak shape assumptions.     

Derivatization Method for Determination of Nitrosamines by GC�CMS

Gas chromatography/low-resolution mass spectrometry with electron impact source was applied to detect eight nitrosamines (NAs). NAs were first denitrosated by a mixed solution of hydrobromic and acetic acids, followed by sulfonylation with p-toluenesulfonyl chloride. Variables affecting the denitrosation and sulfonylation, such as temperature, time, pH and reagent concentration, were optimized. Comparison of the determination of NAs with and without derivatization was performed. Results showed that better chromatographic behavior and larger mass response were obtained after derivatization, and instrumental detection limits ranged from 0.016 to 0.053 ng, a nearly 20-fold decrease of those without derivatization. The proposed method provided an alternative to performing accurate qualitative and quantitative analysis of NAs with expensive high-resolution mass spectrometry or thermal energy analyzer.     

气相色谱/化学电离-质谱法检测石油中的环烷酸

采用柱色谱和阴离子交换树脂法分离出原油200~420 ℃馏分中的羧酸,通过红外光谱仪检验分离效果及分离出的羧酸的类型。采用气相色谱及以异丁烷为反应气的化学电离(CI)质谱法分析分离出的羧酸。在对其结构进行推断和归类中,以纯脂肪酸、环烷酸以及分离出的石油酸的CI质谱数据为基础,结合环烷酸z系列通式CnH2n+zO2,分别得到了不同碳数的脂肪酸及一环、二环……六环环烷酸的分析结果。结果表明,含酸原油中的羧酸主要是环烷酸,相对分子质量分布为170~510,碳数分布为C10~C35,其中双环、三环环烷酸含量较高。