Inclusion complexes between cyclic siloxanes and cyclodextrins: synthesis and characterization

Molecular inclusion complexes between cyclodextrins and cyclic siloxanes were prepared and characterized via a combination of liquid and solid state NMR, FT-IR, TGA, powder X-ray diffraction, SEM–EDS and elemental analyses. The crystalline complexes adopted the channel-type conformation. Depending from the size of both the cyclic sugar cavity and the silicon guest, various yields (between 0 and 41%) and host–guest molar ratios (between 1:1 and 4:1) were obtained. α-cyclodextrin (α-CD) and β-cyclodextrin (β-CD) were observed to form crystalline inclusion complexes only with D₃ (cyclic dimethyltrisiloxane) due to steric effects, whereas the larger γ-cyclodextrin (γ-CD) formed inclusion complexes both with D₃, D₄ (cyclic dimethyltetrasiloxane) and D₅ (cyclic dimethylpentasiloxane). This study is believed to be the first step towards the selective removal of cyclic siloxanes impurities from commercial PDMS preparations.     

Complex Formation of Polybutadiene with Cyclodextrins

Polybutadienes were found to form inclusion complexes with cyclodextrins in high selectivity to give crystalline compounds. α‐Cyclodextrin and β‐cyclodextrin form complexes only with polybutadienes of low molecular weight and high 1,4‐addition content. Polybutadienes with high 1,2‐content gave complexes with γ‐cyclodextrin in low yield. The yields of the γ‐cyclodextrin complexes decreased with increasing molecular weights of the polybutadienes of similar composition. Complexes were isolated and characterized by means of FT‐IR, ¹H NMR, ¹³C CP/MAS NMR, ¹³C PST/MAS NMR spectroscopies, and X‐ray diffraction. Inclusion modes are discussed.     

1H NMR study of the inclusion of Costa-type organocobalt(III) complexes in cyclodextrins

The inclusion behavior between Costa-type complexes and cyclodextrins (CDs) was studied by 1H NMR in aqueous solution. The results indicated that 1:1 inclusion complex was formed, in which the alkyl group of the guest was included in the cavity of CDs. The stability constants of the inclusion complexes were determined by the quantitative 1H NMR method. The effects on stability constants were discussed when various host and guest compounds were used.     

Formation and characterization of inclusion complexes of poly(butylene succinate) with alpha- and gamma-cyclodextrins

The inclusion complexes (ICs) of alpha- and gamma-cyclodextrins (CDs) with high-molecular-weight poly(butylene succinate) (PBS) were prepared and characterized by differential scanning calorimetry, Fourier-transform infrared spectroscopy (FT-IR), wide-angle X-ray diffraction, solid-state 13C nuclear magnetic resonance (NMR) spectroscopy, and solution 1H NMR spectroscopy. The resultant ICs were found to have channel structures. FT-IR data suggested that the ICs were stabilized by hydrogen bonds between the host CD molecules and the guest PBS chains. Through the formation of ICs, the PBS chain possibly adopts the kink conformation in the included state, as indicated by NMR analysis.     

Encapsulation of sodium nimesulide and precursors in beta-cyclodextrin

Crystalline 1:1 inclusion complexes with beta-cyclodextrin (beta-CD) and the sodium salt of nimesulide (4-nitro-2-phenoxymethanesulfonanilide), and the sodium salt of the derivative 2-phenoxymethanesulfonanilide, have been prepared by co-precipitation from aqueous solution. The presence of true inclusion complexes was supported by elemental analysis, thermogravimetry and powder X-ray diffraction. FTIR and 13C CP MAS NMR spectroscopy confirmed that no chemical modification of the guests occurred upon formation of inclusion complexes. The reaction of the precursors 2-phenoxynitrobenzene and 2-phenoxyaniline with beta-CD was also studied and crystalline inclusion complexes with a 2:1 (host-to-guest) stoichiometry were isolated. The interaction of the different guest species with beta-CD host molecules was studied theoretically by carrying out ab initio calculations. Favourable inclusion geometries were obtained for the four guests mentioned above. On the other hand, it was found that the inclusion of the neutral guests nimesulide and 2-phenoxymethanesulfonanilide was considerably less favourable. This is in agreement with the experimentally observed difficulty in isolating true inclusion complexes containing these guests and beta-CD. The calculated lower stability is attributed to the different steric hindrance arising from the different conformational preferences of neutral and anionic forms.     

Solvent‐dependent formation of inclusion complexes between methylated cyclodextrins and biodegradable polymers

The inclusion complexes (ICs) of unmodified natural and methylated α‐cyclodextrins (CDs) with biodegradable polymers, polyethylene glycol and poly(ε‐caprolactone), were prepared by two methods, that is, the one using water and the other using chloroform as the solvent for the respective CDs. The ICs obtained were characterized by IR, WAXD, DSC, and ¹³C CP/MAS NMR. It was found that the possibility and the phenomena of IC formation could be varied with the degree of methyl substitution of CD as well as the type of solvents used. Methylated α‐CDs showed the prominent characteristics of IC formation with polymers in the case where chloroform was used than in the case where water was used as the solvent for CDs, while vice versa in the case of native α‐CD. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 879–891, 2008     

Interactions of Omeprazole and Precursors with beta-Cyclodextrin Host Molecules

β-Cyclodextrin (β-CD) was mixed with omeprazoleand some of its precursors in aqueous or water/ethanol solutions, and theresulting crystalline products have been characterized by elemental analysis,thermogravimetry, powder X-ray diffraction (XRD), FTIR and ¹³C CP MAS NMRspectroscopy. In the case of2-chloromethyl-4-methoxy-3,5-dimethylpyridine...HCl, itwas found that the solid product always consisted of pure β-CD hydrate. On the other hand, a 2 : 1(host-to-guest) inclusion complex was obtained between β-CD and2-methoxy-2-mercaptobenzimidazole. The thioether intermediate5-methoxy-2-[(3,5-dimethyl-4-methoxy-2-pyridine)methylthio]-1H-benzimidazoleand its sulfoxide derivative (omeprazole) both formed 1 : 1 inclusion complexes with β-CD. Powder XRD indicates that the crystal packing of β-CDhost molecules is herringbone-type for the 2 : 1 complex, and channel-typefor the 1 : 1 complexes. Ab initio calculations were carried out toinvestigate thehost–guest interactions. It was found that the interactionwith the pyridine fragment is wholly repulsive, due to the presence of severalring substituents. On the other hand, the inclusion of the benzimidazole fragmentis energetically favored, but highly dependent on the orientation of thesubstituent methoxy group.     

Non-covalent columnar cyclodextrin-based structures

Examples of the formation of ordered ensembles of α-, β-, and γ-cyclodextrins (CDs) molecules with a columnar packing of macrocycles are reported. These ensembles are formed by (1) the supramolecular dissociation of polymer inclusion complexes under the action of organic solvents that are selective with respect to a polymer guest and (2) the fixation of columnar CD aggregates self-organized in aqueous solutions at high temperatures upon the precipitation from water into organic solvents. Specific features of the organization of cyclodextrins in the thus-synthesized structures are studied by X-ray diffraction. Preliminarily oriented polymer inclusion complexes based on corresponding CDs are used as a model with the columnar arrangement of macrocycles.     

Complexation of capsaicin with β-cyclodextrins to improve pesticide formulations: effect on aqueous solubility, dissolution rate, stability and soil adsorption

The binary systems of capsaicin (CP) and β-cyclodextrin (βCD) or hydroxypropyl-β-cyclodextrin (HPβCD) were investigated in an attempt to improve formulations of this pesticide. UV spectral shift methods indicated guest–host complex formation between CP and the two cyclodextrins (CDs). Phase solubility analysis showed B_s type diagrams with βCD, A_L type with HPβCD indicating the formation of an inclusion complex at 1:1 stoichiometric ratio in solution state. Solubility profiles indicated a 50-fold enhancement of CP solubility could be achieved in the presence of 60 mM HPβCD with respect to CP alone. Solid co-evaporated systems (CES) with 1:0.5–1:5 molar ratios of CP/CDs were physicochemically characterized, revealing that the true inclusion complexes could be formed in the solid CP/βCD systems with 1:5 molar ratio and in the solid CP/HPβCD systems with the molar ratios more than 1:3, respectively. In contrast, crystalline drug was detectable in all other systems. Compared with corresponding physical mixtures (PMs), the CES exhibited significant enhancement with regard to CP dissolution and the protection from CP degradation under the accelerated conditions. It was also revealed that complexation of CP with HPβCD had a pronounced improved effect on the pesticide formulations and greatly reduced the amount of CP adsorbed in the soil. These results demonstrate that HPβCD may be a preferred excipient, enabling more efficient and intelligent use of CP/CDs inclusion complexes in the development of pesticide formulations.     

Stereoselective Complex Formation between Polybutadiene and Cyclodextrins in Bulk

Polybutadienes (PBs) are found to form inclusion complexes with cyclodextrins (CDs) stereoselectively to give crystalline compounds in bulk. These complexes have been isolated and characterized by means of ¹H NMR and ¹³C CP/MAS NMR spectroscopy, and X‐ray diffraction. Although α‐CD did not form inclusion complexes with any kinds of PBs in aqueous solutions, α‐CD did form inclusion complexes with PBs having 1,4‐cis‐ and 1,4‐trans‐butadiene units in bulk by heating at 100 °C. On the other hand, PB having 79% of a 1,2‐structure did not form inclusion complexes with α‐CD. The yield of the inclusion complexes increases with an increase in the content of the 1,4‐cis‐structure of PB and decreases with the molecular weights of the PBs.

     

Supramolecular hydrogel formation based on inclusion complexation between poly(ethylene glycol)-modified chitosan and alpha-cyclodextrin

Supramolecular hydrogels have been prepared on the basis of polymer inclusion complex (PIC) formation between poly(ethylene glycol) (PEG)-modified chitosans and alpha-cyclodextrin (alpha-CD). A series of PEG-modified chitosans were synthesized by coupling reactions between chitosan and monocarboxylated PEG using water-soluble carbodiimide (EDC) as coupling agent. With simple mixing, the resultant supramolecular assembly of the polymers and alpha-CD molecules led to hydrogel formation in aqueous media. The supramolecular structure of the PIC hydrogels was confirmed by differential scanning calorimetry (DSC), X-ray diffraction, and (13)C cross-polarized/magic-angle spinning (CP/MAS) NMR characterization. The PEG side-chains on the chitosan backbones were found to form inclusion complexes (ICs) with alpha-CD molecules, resulting in the formation of channel-type crystalline micro-domains. The IC domains play an important role in holding together hydrated chitosan chains as physical junctions. The gelation property was affected by several factors including the PEG content in the polymers, the solution concentration, the mixing ratio of host and guest molecules, temperature, pH, etc. All the hydrogels in acidic conditions exhibited thermo-reversible gel-sol transitions under appropriate conditions of mixing ratio and PEG content in the mixing process. The transitions were induced by supramolecular association and dissociation. These supramolecular hydrogels were found to have phase-separated structures that consist of hydrophobic crystalline PIC domains, which were formed by the host-guest interaction between alpha-CD and PEG, and hydrated chitosan matrices below the pK(a).The formation of inclusion complexes between alpha-cyclodextrin and PEG-modified chitosan leads to the formation of hydrogels that can undergo thermo-reversible supramolecular dissociation.     

Syntheses and Structural Aspects of Cyclodextrin/Dialkylamine Inclusion Compounds

We report the syntheses and structural aspects of cyclodextrin host–guest inclusion compounds containing linear secondary alkylamines (dipropyl, dibutyl, dipentyl, dihexyl, and dioctyl) at 25 °C. Elemental analysis, ¹³C CP-MAS NMR spectroscopy, and powder X-ray diffraction analysis confirm the inclusion process. The basic host structure of the products is similar to that of typical cyclodextrin inclusion systems. ¹³C MAS NMR experiments show a different resonance pattern for the confined guest molecules with respect to the amine in the liquid phase. The presence of different resonance signals for the homologous carbon atoms of both dialkylamine branches is evidence for the non-symmetric location of the amine in the cyclodextrin channels.     

Investigation of the inclusion of the herbicide cycluron in native cyclodextrins by X-ray diffraction,nuclear magnetic resonance spectroscopy and isothermal titration calorimetry

The formation of inclusion complexes between the native cyclodextrins (CDs) and the urea herbicide cycluron has been investigated both in solution and in the solid state. Single-crystal X-ray structures of both the uncomplexed guest and the β-CD·cycluron complex were determined while powder X-ray diffraction was used to confirm complexation between γ-CD and cycluron in the solid state. Solution-state complexation between the herbicide and α-, β- and γ-CD was established using ¹H NMR spectroscopy and isothermal titration calorimetry (ITC). From the ¹H NMR spectroscopic studies 1:1 complex stoichiometry was indicated in all cases and association constant values (K) were determined as 228, 3254 and 155 for the complexes α-CD·cycluron, β-CD·cycluron and γ-CD·cycluron, respectively. Assigning a 1:1 host–guest ratio, the ITC technique produced K values of the same order as those determined using the spectroscopic method. The thermodynamic parameters ΔH, ΔS and ΔG obtained using ITC provide insights into the driving forces involved during complex formation.     

Spectroscopic identification of the mixed hydrogen and carbon dioxide clathrate hydrate

In this contribution, we first found the novel clathrate hydrate containing two gaseous guests of hydrogen and carbon dioxide by spectroscopic analysis. X-ray powder diffraction and NMR spectroscopy were used to identify structure and guest distribution of the mixed H2 + CO2 hydrate. X-ray diffraction result confirmed that the unit cell parameter was 11.8602 +/- 0.0010 A, and the formed hydrate was identified as structure I hydrate. 1H magic angle spinning (MAS) NMR and 13C cross-polarization (CP) NMR spectroscopy were used to examine the distribution of hydrogen and carbon dioxide molecules in the cages of structure I, respectively. These NMR spectra showed that carbon dioxide molecules occupied both small 512 cages and large 51262 cages, and hydrogen molecules only were occluded in small 512 cages of structure I. The new finding of the mixed hydrogen hydrate is expected to contribute toward the development of hydrogen production technology and, particularly, inclusion chemistry.     

Enhancing the dissolution of hydrophobic guests using solid state inclusion complexation: characterization and in vitro evaluation

The objectives of the present investigation were to prepare and characterize solid inclusion complexes of Etodolac (ETD) with β-cyclodextrin (β-CD) in order to study the effect of complexation on the dissolution rate of ETD, a hydrophobic guest molecule. Phase solubility curve was classified as a typical A_L-type for the cyclodextrins (CD’s), showing that soluble complex was formed. The inclusion complexes in the molar ratio of 1:1 and 1:2 (β-CD–ETD) were prepared by various methods such as kneading, co-evaporation and in molar ratio of 1:1 by spray dried technique respectively. The molecular behaviors of ETD in all samples were characterized by nuclear magnetic resonance (NMR) spectroscopy, fourier-transform infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC) and powder X-ray diffraction (PXRD) studies and Scanning Electron microscopy (SEM) analysis. The results of these studies indicated that complexes prepared by kneading, co-evaporation and spray drying techniques showed inclusion of the ETD molecule into the CD’s cavities. The highest improvement in in vitro dissolution profiles was observed in complexes prepared with spray dried technique. Mean in vitro dissolution time indicated significant difference between the release profiles of ETD from complexes and physical mixtures and from pure ETD.     

对称四甲基六元瓜环与2-氨基甲基吡啶相互作用的研究

分别用核磁共振、紫外可见吸收和X射线单晶衍射方法研究对称四甲基六元瓜环与2-氨基甲基吡啶的相互作用及其结构特征. ¹H NMR谱图和紫外可见吸收光谱图清晰表明, 2-氨基甲基吡啶与对称四甲基六元瓜环有明显的相互作用, 客体2-氨基甲基吡啶的吡啶环部分进入了瓜环空腔, ¹H NMR谱图相关质子峰的积分强度以及客体吸光度随主体瓜环浓度变化明确表示它们之间形成了1∶1的包结配合物, 此包结比并不随瓜环的浓度增加而改变. X射线单晶衍射法对包结配合物晶体的测定进一步证实了核磁共振、紫外可见吸收方法所得结论.     

环糊精及其衍生物的超分子晶体结构研究进展

本文对近年来有关环糊精、环糊精衍生物以及它们与各类客体组装成的超分子包合物的晶体结构研究进行的简要概述。     

Supramolecular aggregations through the inclusion complexation of cyclodextrins and polymers with bulky end groups

Mono‐polyhedral oligomeric sillsesquioxane‐end capped poly(ε‐caprolactone) (mPPCL) can form inclusion complexes (ICs) with α‐ and γ‐cyclodextrins (CDs) but not with β‐CD. These CD ICs have been characterized with X‐ray diffraction, solid‐state ¹³C cross‐polarization/magic‐angle‐spinning NMR spectroscopy, ¹H NMR spectroscopy, Fourier transform infrared spectroscopy, differential scanning calorimetry, thermogravimetric analysis, and scanning electron microscopy. The poly(ε‐caprolactone) (PCL) chain of mPPCL is included within the channel provided by the CDs to form a columnar, crystalline structure. The PCL/CD ratios determined by ¹H NMR spectroscopy for the ICs with α‐ or γ‐CDs are higher than the stoichiometries because of the steric hindrance of the bulky polyhedral oligomeric silsesquioxane chain end and result in a fraction of the ε‐caprolactone units free from complexation with the CDs. On the basis of these analyses, we propose some possible structures for these CD/mPPCL ICs. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 125–135, 2007     

Preparation and characterization of polypseudorotaxanes based on block-selected inclusion complexation between poly(propylene oxide)-poly(ethylene oxide)-poly(propylene oxide) triblock copolymers and alpha-cyclodextrin

A series of new polypseudorotaxanes were synthesized in high yields when the middle poly(ethylene oxide) (PEO) block of poly(propylene oxide)-poly(ethylene oxide)-poly(propylene oxide) (PPO-PEO-PPO) triblock copolymers was selectively recognized and included by alpha-cyclodextrin (alpha-CD) to form crystalline inclusion complexes (ICs), although the middle PEO block was flanked by two thicker PPO blocks, and a PPO chain had been previously thought to be impenetrable to alpha-CD. X-ray diffraction studies demonstrated that the IC domains of the polypseudorotaxanes assumed a channel-type structure similar to the necklace-like ICs formed by alpha-CD and PEO homopolymers. Solid-state CP/MAS (13)C NMR studies showed that the alpha-CD molecules in the polypseudorotaxanes adopted a symmetrical conformation due to the formation of ICs. The compositions and stoichiometry of the polypseudorotaxanes were studied using (1)H NMR, and a 2:1 (ethylene oxide unit to alpha-CD) stoichiometry was found for all polypseudorotaxanes although the PPO-PEO-PPO triblock copolymers had different compositions and block lengths, suggesting that only the PEO block was closely included by alpha-CD molecules, whereas the PPO blocks were uncovered. The hypothesis was further supported by the differential scanning calorimetry (DSC) studies of the polypseudorotaxanes. The glass transitions of the PPO blocks in the polypseudorotaxanes were clearly observed because they were uncovered by alpha-CD and remained amorphous, whereas the glass-transition temperatures increased, because the molecular motion of the PPO blocks was restricted by the hard crystalline phases of the IC domains formed by alpha-CD and the PEO blocks. The thermogravimetric analysis (TGA) revealed that the polypseudorotaxanes had better thermal stability than their free components due to the inclusion complexation. Finally, the kinetics of the threading process of alpha-CD onto the copolymers was also studied. The findings reported in this article suggested interesting possibilities in designing other cyclodextrin ICs and polypseudorotaxanes with block structures.     

Preparation and characterization of inclusion complexes of beta-cyclodextrin with ionic liquid

The solubilities of beta-cyclodextrin (beta-CD), ionic liquid (IL) 1-butyl-3-methylimidazolium hexafluorophosphate (bmimPF6), and their mixture in water were determined, and the conductivity of these aqueous solutions was measured. It was demonstrated that beta-CD and bmimPF6 could enhance the solubility of each other, and the solubility curves of each were linear with gradients of about 1. The conductivity decreased remarkably with increasing beta-CD concentration, and a discernible break in the conductivity curve could be observed when beta-CD and bmimPF6 were equimolar in the solution. The solubility and conductivity results indicated that inclusion complexes (ICs) of 1:1 stoichiometry were formed. The inclusion compounds were further characterized by using powder X-ray diffraction (XRD) analysis, 13C CP/MAS (cross-polarization magic-angle spinning) NMR and 1H NMR spectroscopy, and thermogravimetric analysis (TGA). The results showed that the ICs were a fine crystalline powder. The host-guest system exhibited a channel-type structure and each glucose unit of beta-CD was in a similar environment. The decomposition temperature of the ICs was lower than that of bmimPF6 and beta-CD individually.