N'-亚硝基去甲烟碱在沸石分子筛上的程序升温表面反应

使用程序升温表面反应技术，首次研究了沸石对于分子直径远大于其孔径的烟 草特有亚硝胺代表物N'-亚甲烟碱的（NNN）催化裂解作用．NNN依然能被沸石吸附 和催化裂解；沸石孔径和表面酸位都是影响催化分解N因素．计算表明：NNN很可能 以N-N-O官能团嵌人沸石孔道的形式进行吸附．介孔分子筛被首次用于催化裂催化 活性远远高于微孔沸石．     

亚硝胺在小微孔沸石上的“嵌入式”吸附探讨

通过结构计算分析了大体积的六亚甲基亚硝胺（NHMI）和N’-亚硝基去甲烟碱（NNN）在小微孔沸石上各种可能的吸附方式,结合实验事实推断出它们以－N－N=O官能团嵌入沸石孔道进行吸附的几率最大.这种“嵌入式”吸附方式是小微孔沸石得以吸附、分离那些体积远远大于其孔径的毒物分子的重要原因,可用以拓宽沸石在生态环境保护中的应用.     

沸石的孔口改性与气体吸附分离

沸石由干具有独特的微孔结构和表面性质，对物质的吸附表现出高度的选择性，已被广泛用于许多工业吸附分离过程．在气体分离方面，最常见的是利用沸石制造纯净的稀有气体和富氧空气．Niwa等［‘－‘］和本实验室［‘’］已成功地采用出（OCH小化学气相沉积方法对HM和Hi8M七沸石进行孔径精细调变，改善了沸石的择形吸附分离和催化性能．本文试图进一步研究沸石孔口改性在气体吸附分离方面的应用潜力．我们选择的H元气体混合物体系是NZ／OZ和CH。川。，因为O。，NZ和CH。三种分子的动力学直径分别为0．346O．364和0．380urn，相差甚…     

NixB／沸石催化剂上异丙苯的吸附态

硼化镍是新型的加氢催化材料,具有独特的催化特性。本文用红外光谱研究NixB/沸石催化剂上异丙苯的吸附态,并通过异丙苯临氢裂解反应性能及其产物分布对其吸附态作进一步的阐明。     

β沸石合成与表征的研究进展

β沸石由Mobil公司的Wadlinger等［‘j于1967年首次合成,由于长期未能解决其结构测定问题,加之ZSM系列沸石的合成和成功应用,因此未能引起人们的足够重视,直至1988年揭示了其特有的三维结构特征,尸沸石重又引起人们的兴趣．它具有良好的热和水热稳定性、适度的酸性D‘和酸稳定性及疏水性,且是唯一具有交叉十二元环通道体系的高硅沸石,其催化应用表现出烃类反应不易结焦和使用寿命长的特点,在烃类裂解、异构化、烷烃芳构化、烷基化以及烷基转移反应等方面,表现出优异的催化性能,是十分重要的催化材料．1尸沸石表征1．1卢沸石的…     

化学液相沉积与沸石择形催化性能

在经ＳｉＣｌ４化学液相沉积的ＨＺＳＭ－５沸石催化剂上进行了甲茉歧化、Ｃ６烷烃异构体催化裂解和邻二甲苯异构化反应，随着ＳｉＯ２沉积量增加，沸石内表面性质变化不大，而孔径逐渐缩小，甲苯歧化和邻二甲苯异构化反应的对二甲七选择性提高，Ｃ６烷烃异构体中支链烃３－甲基戊烷和２，２－二甲基丁烷的裂解反应转化率下降，实验结果表明，化学液相沉积是改善沸石催化剂对反应物物产物择形性能的一种有效方法。     

化学液相沉积法调变沸石孔径及异构体择形分离

本文用化学液相沉积方法精细调变NaY沸石孔径, 在适当的溶剂中硅酯与沸石吸附水或表面羟基作用而沉积于沸石外表面, 沸石孔口有效地被缩小。制备了一系列氧化硅沉积量不同的SiNaY沸石, 红外光谱、比表面和孔体积测量结果表明随着沉积量增加沸石孔径逐渐缩小, 但沸石骨架结构、孔容和内表面性质基本不变。测定了SiNaY样品对于对二甲苯/1, 3, 5-三甲苯, β-甲基萘/α-甲基萘, 1, 2, 4-三甲苯/1, 3, 5-三甲苯, 对二甲苯/间二甲苯和对甲酚/间甲酚五类分子尺寸不同的液体混合体系的择形吸附行为, 发现SiNaY沸石对分子尺寸与沸石孔径相近的混合体系具有良好的择形选择吸附分离性能。     

烃类在β沸石上的吸附与扩散：粒度效应

β沸石首次为美国Mobil公司所合成,其骨架结构具有三维12元环孔道(两维线性,一维非线性)。与Y型分子筛相比,β沸石具有更高的热稳定性和耐酸性,对加氢裂化,加氢异构化,裂解,芳构化等反应有良好的催化性能。人们过去着重研究沸石的表面酸性质,本文报道粒度对沸石吸附与扩散的影响。     

沸石分子筛材料在消除挥发性有机化合物反应中的吸附与催化性能

作为空气污染物的主要成分之一,挥发性有机化合物(VOCs)会极大地破坏生态环境并损害人体健康。在众多消除 VOCs的方法中,吸附法由于操作简单、成本低廉的优势而在工业上得以广泛应用。催化燃烧法则因去除效率高,适用范围广且无二次污染等优点被认为是 VOCs消除最有效的手段之一。
　　目前,活性炭是最常用的 VOCs吸附剂,但存在再生困难、抗湿性差、易燃等诸多问题。与活性炭等常规吸附剂相比,沸石分子筛作为 VOCs吸附剂其主要优势在于：(1)沸石分子筛的疏水性可调,通过调控分子筛骨架的硅铝比可以调节分子筛的亲疏水性,高硅铝比的沸石分子筛有着优异的疏水性能,从而可以有效降低在一定湿度条件下水对 VOCs分子的竞争吸附;(2)均一的孔径分布可以有效地进行分子识别,从而使吸附剂对VOCs的选择性吸附性大大提高;(3)沸石分子筛一般由硅铝构成,本身不可燃且水热稳定性好,因此能够与微波加热等其他手段相结合以降低吸附剂重生能耗,提高操作安全性;(4)沸石分子筛比表面积大,吸附容量高,是作为蜂窝转轮吸附技术中吸附剂的理想材料,而该技术是目前工业大规模消除VOCs的研究热点。因此,沸石分子筛由于其独特的性质,被视为一种简单高效、选择性好的VOCs吸附剂。现阶段,催化燃烧VOCs所使用的催化剂常用金属氧化物作为载体,但是金属氧化物比表面积相对较小且孔道结构不均一,因此严重影响了催化剂对VOCs的催化燃烧效率,限制了催化燃烧活性的提高。而与金属氧化物载体相比,沸石分子筛材料具有均一的孔道结构以及相对较大的比表面积等优点,而将具有较好吸附选择性和吸附容量的沸石分子筛作为载体,负载活性组分后可以实现催化剂催化燃烧性能的显著提高,从而成为VOCs催化燃烧的理想催化剂。
　　本文综述了目前沸石分子筛材料作为吸附剂和催化剂载体的负载型催化剂消除各类VOCs的研究进展。对于沸石分子筛作为VOCs吸附剂,我们小结了影响其吸附容量和吸附选择性的因素,发现分子筛的孔道大小和阳离子类型与VOCs的吸附情况密切相关。在此基础上,进一步简单介绍了分子筛蜂窝吸附转轮技术的研究现状。对于沸石分子筛作为催化剂载体,我们总结了其用于各类VOCs催化燃烧的研究情况,如烷烃类、芳烃类和醛类等。探究了催化性能的影响因素及相应的催化机理,发现分子筛的孔道结构、阳离子类型、硅铝比等都会显著影响沸石分子筛负载型催化剂的催化活性。最后,探讨了沸石分子筛应用于VOCs消除目前所存在的问题,同时展望了该领域未来的研究和发展方向。     

丁烯催化裂解反应中的C-H键型副反应和化学平衡问题

用小型固定床反应器以及氨气程序升温脱附(NH<,3>-TPD)和吡啶吸附红外光谱(Py-IR)研究了醚后碳四液化气中的丁烯在改性纳米ZSM-5沸石催化剂上的催化裂解反应.结果表明,丁烯催化裂解反应的丙烯选择性主要受氢转移和脱氢反应制约.这些C-H键型反应生成烷烃和芳烃副产物,并导致催化剂积炭.低温有利于氢转移(尤其异丁...     

C2-C2直链烯烃在HY 和H-ZSM-5分子筛上的吸附

采用ONIOM(B3LYP/6-311++G(d,p):UFF)分层计算方法, 研究了C₂-C₅直链烯烃在HY 和H-ZSM-5 分 子筛上的吸附性质. 理论计算结果表明: 烯烃与分子筛的Br?nsted 酸性位相互作用形成π配位超分子复合物; 随着碳链的增长, 烯烃的吸附能增加, 增加量近似为一个常数(HY 分子筛: 约12 kJ·mol^-1; H-ZSM-5 分子筛: 约 25 kJ·mol^-1), 与烷烃在分子筛上的吸附具有相同的规律. 双键位置对烯烃的吸附能影响很大, 2位烯烃的吸附能 要远大于1 位烯烃的吸附能. 不同类型分子筛对烯烃的吸附性能也有很大差别, 由于局域效应的影响, 小孔径 H-ZSM-5分子筛上的吸附能大于大孔径的HY分子筛,而且碳链越长,这种差别越大.从微观结构上看,吸附的烯 烃与H-ZSM-5分子筛酸性位的距离要远大于它们与HY分子筛酸性位的距离, 这是由于不同类型分子筛的微孔 结构产生的范德华作用是不同的,这种作用随着孔径的减小而增强.前线轨道分析表明, 对于小分子烯烃,大孔径 HY分子筛对其催化活性相近,而小孔径H-ZSM-5分子筛随着烯烃碳原子数的增加催化活性有减弱的趋势.     

不同来源的钛硅沸石的孔结构,酸性和催化性能

用气固相类质同晶取代和水热方法合成了Ｔｉ－ＺＳＭ－５和ＴＳ－１沸石，对它们的组成、孔结构、酸性和催化活性进行了比较。以季铵盐为模板剂水热合成的无铝ＴＳ－１沸石骨架Ｔｉ含量高，表面无强酸位，且随骨架Ｔｉ含量增加，沸石晶内由缺陷造成的二次孔数量增多。类质同晶取代的Ｔｉ－ＺＳＭ－５沸石骨架Ｔｉ含量有限，样品内尚保留部分骨架Ａｌ，沸石表面强弱酸位同时存在。增加沸石骨架Ｔｉ含量和晶内二次孔对提高苯酚过氧化氢     

改性Y沸石的孔结构与催化性能

测定了不同方法改性的Y沸石样品的N_2吸附和脱附等温线, 并计算了样品的微孔、大孔和二次孔的孔容和表面积, 以及样品的二次孔分布, 证实改性方法对样品的孔结构有显著的影响。同时, 还考察了不同尺码探针分子在改性Y沸石样品上的酸催化反应活性, 将所得数据与样品的酸量、酸强度和二次孔容相关联, 取得了满意的结果。说明对大尺码反应分子, 改性过程中生成的大孔径二次孔, 对提高沸石催化剂的反应活性是有利的。     

Methanol-to-Olefin Conversion over Zeolite Catalysts: Active Intermediates and Deactivation

Methanol-to-olefin (MTO) conversion over various zeolites with different topologies, Si/Al molar ratios, and crystallite sizes were investigated to verify the effects of pore shape and size, acidity, and external surface area on the catalytic activity, product selectivity, and deactivation. The IR and electron spin resonance (ESR) study of zeolite catalysts used in MTO also proceeded to deduce the active intermediates formed in their cages or pores. The zeolites with 8 membered-ring (MR) pore entrances such as CHA, ERI, LTA, and UFI commonly exhibited high selectivity to lower olefins due to their small entrances, but the CHA catalyst with the smallest cage maintained its activity longer than other 8MR zeolites. The slow condensation of polymethylbenzene (PolyMB) to polyaromatic hydrocarbons (PAH) on MOR zeolite with a high Si/Al molar ratio due to its low concentration of strong acid sites resulted in a slow deactivation. The extremely small crystallites of H-SAPO-34 and H-ZSM-5 less than 100 nm showed an adverse effect in MTO; while the large crystallites above 1,000 nm also exhibited poor catalytic performance because of their small external surface. The study of IR regarding the adsorbed and occluded materials on zeolites demonstrated the effect of pore shape and size on the active intermediates: the zeolites with larger pores and cages allowed the formation of alkylbenzenes with long alkyl groups which preferred to be condensated to PAH. The well-resolved hyperfine splitting of ESR spectra observed on H-SAPO-34 used in MTO clearly illustrated the presence of hexamethylbenzenium radical cations. The small intersections of phosphorous-modified H-ZSM-5 allowed the formation of tetramethylbenzenium radical cations in MTO. The formation of PolyMB radical cations, their role as active intermediates and the effect of topology, acidity, and crystallite size of zeolites on their deactivation were discussed.     

The effects of polymer chain rigidification, zeolite pore size and pore blockage on polyethersulfone (PES)-zeolite A mixed matrix membranes

The polyethersulfone (PES)-zeolite 3A, 4A and 5A mixed matrix membranes (MMMs) were fabricated with a modified solution-casting procedure at high temperatures close to the glass transition temperatures (T_g) of polymer materials. The effects of membrane preparation methodology, zeolite loading and pore size of zeolite on the gas separation performance of these mixed matrix membranes were studied. SEM results show the interface between polymer and zeolite in MMMs experiencing natural cooling is better (i.e., less defective) than that in MMMs experiencing immediate quenching. The increment of glass transition temperature (T_g) of MMMs with zeolite loading confirms the polymer chain rigidification induced by zeolite. The experimental results indicate that a higher zeolite loading results in a decrease in gas permeability and an increase in gas pair selectivity. The unmodified Maxwell model fails to correctly predict the permeability decrease induced by polymer chain rigidification near the zeolite surface and the partial pore blockage of zeolites by the polymer chains. A new modified Maxwell model is therefore proposed. It takes the combined effects of chain rigidification and partial pore blockage of zeolites into calculation. The new model shows much consistent permeability and selectivity predication with experimental data. Surprisingly, an increase in zeolite pore size from 3 to 5 Å generally not only increase gas permeability, but also gas pair selectivity. The O₂/N₂ selectivity of PES-zeolite 3A and PES-zeolite 4A membranes is very similar, while the O₂/N₂ selectivity of PES-zeolite 5A membranes is much higher. This implies the blockage may narrow a part of zeolite 5A pores to approximately 4 Å, which can discriminate the gas pair of O₂ and N₂, and narrow a part of zeolites 3A and 4A pores to smaller sizes. It is concluded that the partial pore blockage of zeolites by the polymer chains has equivalent or more influence on the separation properties of mixed matrix membranes compared with that of the polymer chain rigidification.     

The influence of pore structure on reaction mechanism of propylene dimerization in zeolite: A theoretical viewpoint

Molecular sieves have been widely used in the petrochemical industry as environment-friendly catalysts. The pore structure is an important factor influencing the catalytic performance of the zeolite. In this work, a combined Our own N-layered Integrated molecular Orbital and Molecular mechanics method was used to study the mechanism of propylene dimerization in four zeolites (ZSM-5, BEA, MCM-22, and MOR) with different pore structures. Comparing the stepwise mechanism and the concerted mechanism, it is found that the two mechanisms compete with each other in the macroporous BEA, MCM-22, and MOR zeolites, and both mechanisms are possible. However, in ZSM-5 zeolite with medium pore size, the propylene dimerization reaction tends to proceed according to the stepwise mechanism. Furthermore, no matter which mechanism is adopted, the activation energy of propylene dimerization reaction in MCM-22 is the smallest in the four zeolites, indicating that its MWW-type structure (A framework type defined by the International Zeolite Association) may be the most favorable pore structure for the reaction and possesses the highest catalytic activity.     

亚硝胺在沸石催化剂上的程序升温表面反应

 采用程序升温表面反应技术研究了二甲基亚硝胺,吡咯烷亚硝胺和环六亚甲基亚硝胺在NaY,NaZSM－5和HZSM－5等沸石及MCM－41中孔分子筛上的脱附及分解．结果表明,沸石对亚硝胺有独特的吸附和催化分解作用．同时,研究了沸石孔结构及表面酸性对亚硝胺分解反应的影响．     

甲醇催化转化制丙烯中HZSM-5分子筛的尺寸效应

甲醇催化制丙烯(MTP)是一个具有重要工业应用的研究课题, 目前普遍采用的催化剂是HZSM-5 分子筛. 通过调节分子筛合成原料的配比、晶化温度和晶化时间等参数, 对所制备的不同晶粒尺寸的HZSM-5 分子筛, 综合利用X射线衍射(XRD)、扫描电镜(SEM)、N₂吸附和氨气程序升温脱附(NH₃-TPD)等手段表征了其晶格结构、表观形貌、孔结构以及酸性质. 利用固定床反应装置对HZSM-5 分子筛甲醇催化制丙烯的活性和稳定性进行了评价, 并采用热重(TG)分析技术对催化剂的积炭性能进行了考察. 实验结果表明, HZSM-5 分子筛粒度的减小可以增加分子筛比表面积、孔体积, 同时有更多开放的孔口及短的孔道长度, 有利于反应物分子的吸附和传质,并降低了产物分子在孔道中的扩散距离及发生二次反应的几率, 提高了催化剂的抗积炭能力和容炭能力以及稳定性; 而且所合成的小尺寸分子筛单位质量的总酸量及强酸量均有不同程度的下降, 有利于提高目标产物丙烯的选择性.     

Zeolite synthesis using degradable structure-directing agents and pore-filling agents

Zeolites and molecular sieves are synthesized using organic structure-directing agents (SDAs) that have the potential to be degraded into fragments within the pore space so that they can be readily extracted at mild conditions. The zeolites and molecular sieves, VPI-8, ZSM-12, and ZSM-5, are synthesized using the ketal-containing SDA, 8,8-dimethyl-1,4-dioxa-8-azoniaspiro[4,5]decane (SDA-1). As expected, solids with unidimensional pore systems (VPI-8, ZSM-12) are much more difficult to process by this methodology than solids containing multidimensional pore systems (ZSM-5). Pore-filling agents (PFAs) such as isobutylamine and cyclopentylamine are used together with the ketal-containing SDA-1 to prepare ZSM-5. Extraction of the PFA is shown to be feasible, and its removal provides space for components to enter the zeolite micropores where they react with and cleave SDA-1. Removal of the cleavage fragments from SDA-1 gives ZSM-5 that has the appropriate pore volume, framework aluminum (measured by 27Al NMR), and catalytic behavior. Reasons for desiring this new type of zeolite synthesis method are enumerated.