溶液加工型自主体热活化延迟荧光材料的研究进展

十年来,作为第三代有机发光二极管(organic light-emitting diodes, OLED)发光材料的热活化延迟荧光(thermally activated delayed fluorescence, TADF)材料备受学术界和产业界的广泛关注. TADF分子由于单重态与三重态之间的能级差较小,当受到环境热激活时,三重态激子可以通过反系间窜越转化为单重态,从理论上讲,可以实现100%的激子利用率.这一特性使得OLED器件外量子效率显著提高.溶液加工法具有成本低、方法简单、材料利用率高、可大面积生产等优势,是柔性及印刷OLED器件制备工艺的理想候选.具有良好的电荷传输能力的主体材料能有效降低激子密度和促进能量高效传递.利用自主体TADF材料制备的溶液加工型器件能有效平衡载流子传输和提升器件性能,同时在使用过程中可避免相分离,保持薄膜的均匀性和提高器件的稳定性.本综述总结了溶液加工型自主体TADF材料的研究进展.首先介绍了TADF材料的基本原理和研究意义,强调了溶液加工型自主体TADF材料在显示器件和照明器件等方面的应用潜力.然后详细讨论了溶液加工型自主体TADF材料的不同分...     

分子筛限域碳点实现超长寿命热活化延迟荧光

正热活化延迟荧光(TADF)材料由于其较小的单重态-三重态能级差(ΔEST),三重态可通过反系间窜跃转向单重态而发出延迟荧光,从而获得潜在的高荧光量子效率。这类材料独特的发光性能使其在光电器件、生物成像、传感等应用方面展现出优势~(1,2)。但目前报道的TADF材料主要集中于纯有机材料和有机金属络合物,其延迟荧光寿命     

蓝光热激子材料的研究进展

热激子荧光材料由于交错的能级排列,激子在电致发光过程中可由高位三重态通过反向系间窜跃转换到单重态,从而最大限度利用三重态激子,实现理论100%的最大内量子效率,这不仅突破了传统荧光材料和三重态-三重态上转换发光材料在激子利用上的限制,而且克服了热活化延迟荧光(TADF)材料在高电流密度下效率滚降严重的问题,因而在电致发光上显现出独特的优势.蓝光长期以来是有机光电全彩显示的短板.蓝光显示上,磷光材料和TADF材料的色纯度和稳定性往往不尽如人意,而热激子材料可实现更高品质的蓝光发射,即使在深蓝领域也能表现出不俗的器件性能.系统地综述了蓝光热激子材料的发光机理、设计准则以及近年来具有代表性的研究成果,并对其发展趋势进行展望.     

有机-过渡金属配合物的三重态发光问题

近年来,随着OLED器件的发展,有关有机-过渡金属配合物的三重态发光问题受到人们广泛的关注。这不仅是与电致发光器件效率的提高相关联,同时也是一个在光物理研究中值得深入研究的课题.文章对有机-金属化合物激发态的能级分裂,以及发光三重态亚态的零场-分裂(ZFS)等进行了讨论,对具不同电子构型中心金属离子,例如八面体结构与平面四方形构型结构等与它们光物理行为间的关系进行了讨论.特别对这类体系的发光三重态在自旋轨道偶合作用(SOC)和构型相互作用(CI)的影响下,导致单重态与三重态的混合和促进从最低三重态到基态的发光跃迁进行了讨论.     

电子给体-受体型热活化延迟荧光蓝光材料研究进展

热活化延迟荧光材料由于其最低激发单重态和最低激发三重态之间的能级差较小,三重态激子可以通过反向系间窜越过程上转换到单重态,实现无贵金属添加的三重态激子参与的荧光发射,大大提高了发光效率,解决了传统荧光有机发光二极管(OLED)内/外量子效率(≤25%/≤5%)低下的问题;与磷光OLED相比,避免了使用贵金属,在造价方面具有更大优势.在类型众多的热活化延迟荧光(TADF)材料中,由于电子给体-受体型分子合成简单,性能出众而成为近年来的研究热点.另一方面,高效蓝光材料的稳定性及色纯度问题一直是该领域研究亟待解决的难题.本文将依据不同电子给受体单元,对电子给体-受体型热活化延迟荧光蓝光材料及其OLED器件的最新进展、发光原理和设计原则进行了简要综述,并对其发展作出展望.     

热活化延迟荧光蓝光小分子取代基效应的研究进展

近年来, 作为第三代有机发光二极管(organic light-emitting diodes, OLED)发光材料的热活化延迟荧光(thermally activated delayed fluorescence, TADF)材料受到了学术界和产业界的广泛关注. TADF分子由于其单线态与三线态之间的能级差较小, 三线态激子可以被环境热活化而通过反系间窜越上转换至单线态, 理论上可实现100%的激子利用率, 从而使得OLED器件外量子效率显著提高. TADF材料被认为是突破高效稳定有机电致蓝光发射瓶颈的潜在解决方案. 一般, TADF分子为含有电子给体(donor, D)和电子受体(acceptor, A)的纯有机推拉电子体系. 通过改变给体单元和受体单元的结构、数量和取代基及其位置可以有效调节TADF分子的单线态-三线态能级差、前线轨道分布、聚集态结构、电致发光颜色及其性能. 同时取代基在调控给、受体单元的推拉电子能力及TADF材料的分子构型、聚集态结构和稳定性等物化特性方面扮演着非常重要的角色. 本综述分别对D-A型和多重共振型TADF蓝光分子的取代基效应进行了综述, 以期为高效稳定的蓝光TADF分子的设计合成提供有效借鉴.     

带烷氧基的苯基蒎烯吡啶铱配合物的合成及光物理性质

合成了一组新型的带有烷氧基团的铱(Ⅲ)配合物[Ir(RO-pppy)3], 并进行了结构表征. 该组配合物在~496 nm处有较强的三重态发射, 磷光量子产率为0.4~0.6, 三重态寿命为2~4 μs. 结果表明, 连接了长链的配合物可减少分子间的聚集, 可以用作有机电致发光器件中的磷光材料.     

基于磷光材料的电致发光二极管研究进展

电致发光二极管(LEDs)具有能耗低、寿命长、绿色环保等优点,在固态照明、全色显示等领域具有广阔的应用前景。 与传统的荧光电致LEDs相比,磷光电致LEDs能够同时利用单重态和三重态激子,理论上可以使器件的内量子效率达到100%,突破5%的外量子效率极限。 因此,发展高效的磷光材料以及实现其在电致LEDs中的应用是非常有意义的。 本文综述了目前主要的磷光材料,包括有机金属配合物、纯有机分子、聚合物、金属有机框架材料和碳量子点等,并总结了稀有金属配合物和纯有机分子在电致磷光 LEDs中的研究进展,同时对电致磷光LEDs的发展前景进行展望。     

蓝色有机电致磷光主体材料

有机电致发光(OLEDs)因其具有驱动电压低、主动发光、亮度高、视角宽、响应快、耐冲击与震动等特点,在平板显示与照明领域有着广阔的应用前景。磷光有机电致发光二极管(PhOLEDs)由于能够同时利用三重态和单重态激子,内量子效率从理论上可达到100%,从而克服了传统荧光OLEDs只利用单重态激子时效率25%的限制,在过去的几十年里受到业内人士的极大关注。但要实现三重态磷光,通常需要将重金属原子与主体材料进行掺杂,而重金属配合物的磷光寿命相对较长,容易引起浓度猝灭和三重态-三重态湮灭,所以需要找到合适的主体材料与重金属的磷光发射体进行掺杂来减少上述因素的影响从而得到高性能的电致磷光器件。本文综述了近年来国内外蓝色有机电致磷光主体材料的研究状况,并对空穴传输型、电子传输型和双极传输型的蓝色磷光主体材料按照官能团的不同进行了分类总结和评述,并对其光物理性质、热学性质、电化学性质及器件性能等作了详细归纳比较,最后展望了蓝色有机电致磷光主体材料的前景和发展趋势。     

基于给-受体结构的热活化延迟荧光材料

热活化延迟荧光（TADF）材料由于第一单线态（S₁）与三线态激发态（T₁）之间的能级差较小,使得三线态激子能够有效地系间窜越至单线态发光,实现100%的激子利用率,在有机发光二极管（OLED）等领域得到广泛应用,是目前有机电子学研究的热点之一。基于给-受体（D-A）结构构建TADF材料具有分子设计简便、易于制备、性能优异等特点,引起了人们的普遍关注。本文综述了基于D-A结构设计TADF材料的基本原则,依据给受体构筑单元的不同,概括了各类TADF材料的结构和性能特点以及在器件应用等方面的最新研究进展,最后总结了D-A结构型TADF材料尚存在的问题,并对其未来的关键研究方向进行了分析和展望。     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.