中空介孔三氧化钨微球载钯催化剂的甲酸氧化电催化性能(英文)

采用喷雾干燥法和焙烧处理制备中空介孔三氧化钨微球(HMTTS),在其表面进一步负载活性成分Pd,得到纳米Pd/HMTTS复合催化剂.采用X射线粉末衍射(XRD)、扫描电镜(SEM)和透射电镜(TEM)等对催化剂的形貌和晶型结构进行了表征.结果表明,Pd纳米粒子为面心立方晶体结构,均匀地分布在HMTTS表面.采用循环伏安和计时电流法研究了在酸性溶液中Pd/HMTTS催化剂对甲酸的电催化氧化性能,结果表明Pd/HMTTS催化剂比普通的三氧化钨载钯催化剂(Pd/WO3)对甲酸呈现出更高的电催化氧化活性和稳定性.HMTTS独特的中空介孔结构和表面特性以及氢溢流效应有利于甲酸在钯表面的直接脱氢氧化过程的发生.     

金属钯插层类水滑石的制备及其电催化乙醇的性能研究

高性能的电催化剂对直接燃料电池的商业化应用有着至关重要的作用,目前的阳极材料还存在活性低、易中毒、成本高等问题。本研究以层状双氢氧化物(layered double hydroxides, LDHs)为载体通过浸渍法制备了新型纳米钯(Pd)催化剂,并通过X射线衍射仪、扫描电子显微镜、电感耦合等离子体质谱仪、能谱仪、透射电子显微镜、循环伏安法测试、计时电流测试和电化学阻抗等方法对催化剂的结构和电催化性能进行了研究。结果表明,新制备的Pd/Mg-Al-LDHs仍然保持着LDHs的层状结构,循环伏安测试表明在碱性条件下,Pd/Mg-Al-LDHs比Pd/C有更好的电催化乙醇活性和抗中间产物中毒性能,且乙醇浓度、扫描速率和温度等因素对峰电流有着直接影响。计时电流测试表明在电催化乙醇的过程中Pd/Mg-Al-LDHs比Pd/C拥有更高的电催化活性和稳定性。电化学阻抗测试表明,Pd插层可显著改善Mg-Al-LDHs的导电性,并降低电催化过程中电荷转移阻力。     

中空介孔三氧化钨微球载钯催化剂的甲酸氧化电催化性能

采用喷雾干燥法和焙烧处理制备中空介孔三氧化钨微球(HMTTS),在其表面进一步负载活性成分Pd,得到纳米Pd/HMTTS复合催化剂. 采用X射线粉末衍射(XRD)、扫描电镜(SEM)和透射电镜(TEM)等对催化剂的形貌和晶型结构进行了表征. 结果表明,Pd纳米粒子为面心立方晶体结构,均匀地分布在HMTTS表面. 采用循环伏安和计时电流法研究了在酸性溶液中Pd/HMTTS 催化剂对甲酸的电催化氧化性能,结果表明Pd/HMTTS 催化剂比普通的三氧化钨载钯催化剂(Pd/WO₃)对甲酸呈现出更高的电催化氧化活性和稳定性.HMTTS独特的中空介孔结构和表面特性以及氢溢流效应有利于甲酸在钯表面的直接脱氢氧化过程的发生.     

Pd-Cu/C上甲酸根电催化氧化及其去合金化效应

以柠檬酸钠为稳定剂,通过一锅法在乙二醇体系中制得高分散的Pd-Cu/C二元合金催化剂. 用高分辨透射电镜和XRD观察、表征其形貌和结构,经重复循环扫描对Pd-Cu/C催化剂进行去合金化处理,研究了去合金效应对甲酸根电催化氧化性能的影响. 通过吸附CO的原位ATR-IR光谱测量,初步探讨了去合金前后催化剂表面结构的改变. 研究表明,Cu的去合金化可提高Pd-Cu/C电极初始的电催化氧化活性,但不利于其长时间的活性保持;合金化Pd-Cu/C电极电催化稳定性有显著的优势.     

中空介孔碳化钨微球载钯催化剂对甲酸电催化性能

采用喷雾干燥法和还原炭化处理制备具有中空介孔结构的碳化钨钴复合粉(HTCCS),其中,钴的质量含量为6%。在碳化钨钴复合粉表面的钴和氯化钯发生置换反应,得到纳米Pd/WC复合催化剂。采用X射线粉末衍射(XRD)、扫描电镜(SEM)和透射电镜(TEM)对样品的形貌和晶型结构进行了表征。结果表明, 5.0-6.0nm钯纳米粒子取代钴均匀分布在碳化钨微球表面。采用循环伏安和计时电流法研究了在酸性溶液中Pd/WC催化剂对甲酸的电催化氧化性能,结果表明,Pd/WC催化剂比Pd/C催化剂对甲酸呈现出更高的电催化氧化活性和稳定性。     

TiO2纳米棒载Pd催化剂的制备及其对甲酸的电催化氧化

利用水热合成和无机溶胶法,分别制备了具有棒状(TiO2-R)和无规则结构(TiO2-I)的锐钛矿相TiO2,并以之为载体制备得到Pd/TiO2电催化剂.循环伏安测试显示,与无规则TiO2相比,具有棒状结构的TiO2载Pd催化剂对甲酸氧化的电催化性能提高了70%;计时电流测试显示,运行3000 s后,甲酸在棒状TiO2载Pd催化剂上的氧化电流是无规则TiO2载Pd催化剂的16倍.其原因可能与TiO2纳米棒拥有更好的电子传导性且表面拥有较多的活性含氧基团有关,从而能够有效提高催化剂对甲酸氧化的电催化活性和抗毒化性能.     

中空介孔碳化钨微球载钯催化剂对甲酸电催化性能（英文）

采用喷雾干燥法和还原炭化处理制备具有中空介孔结构的碳化钨钴复合粉(HTCCS),其中,钴的质量含量为6%。在碳化钨钴复合粉表面的钴和氯化钯发生置换反应,得到纳米Pd/WC复合催化剂。采用X射线粉末衍射(XRD)、扫描电镜(SEM)和透射电镜(TEM)对样品的形貌和晶型结构进行了表征。结果表明,5.0-6.0 nm钯纳米粒子取代钴均匀分布在碳化钨微球表面。采用循环伏安和计时电流法研究了在酸性溶液中Pd/WC催化剂对甲酸的电催化氧化性能,结果表明,Pd/WC催化剂比Pd/C催化剂对甲酸呈现出更高的电催化氧化活性和稳定性。     

周期性长程有序介孔钯催化剂用于高效甲酸氧化催化

正钯催化剂因在较低电位下直接氧化甲酸的高活性和较好的耐CO中毒特性等优势,是发展高性能甲酸燃料电池的关键材料之一~(2,3)。为了实现低催化剂用量条件下优异的甲酸电催化性能,合理设计钯催化剂的纳米结构,使其实现高电化学活性表面积和丰富的催化活性位点,是发展高性能钯催化剂的关键。众多研究致力于引入孔结构增加钯催化剂的电化学活性面积,     

碳化钨和Vulcan XC-72炭黑载钯催化剂对甲酸氧化的电催化性能

研究了碳化钨(WC)和Vulcan XC-72炭黑(XC)作混合载体的Pd/WC-XC催化剂对甲酸氧化的电催化性能.发现Pd/WC-XC催化剂对甲酸氧化的电催化性能优于Pd/XC催化剂.而且,Pd/WC-XC催化剂的电催化性能与WC和XC的质量比有关,当质量比为3:1时,催化剂对甲酸氧化的电催化活性最好,当质量比为2:1时,催化剂对甲酸氧化的电催化稳定性性最好.     

Pd/Fe_3O_4-C催化剂对甲醇、乙醇和丙醇氧化的电催化活性（英文）

制备对醇氧化反应具有优异电活性的钯催化剂是醇燃料电池研究的重要内容.本文用硼氢化钠还原法制备了钯纳米颗粒,然后沉积在Fe_3O_4/C复合物表面,得到了不同Fe_3O_4负载量的Pd/Fe_3O_4-C催化剂.透射电镜(TEM)检测显示,钯纳米颗粒均匀地分散在Fe_3O_4/C表面.对制备好的Pd/Fe_3O_4-C催化剂进行了循环伏安法(CV)、计时电流(CA)和电化学阻抗谱(EIS)的测试,研究了其在碱性介质中对C1-C3醇类(甲醇、乙醇和丙醇)氧化的电催化活性.结果表明,所制备的不同Fe_3O_4负载量的Pd/Fe_3O_4(2%)-C、Pd/Fe_3O_4(5%)-C、Pd/Fe_3O_4(10%)-C和Pd/C催化剂中,Pd/Fe_3O_4(5%)-C催化剂表现出最高的醇氧化电流密度.依据循环伏安(CV)数据,Pd/Fe_3O_4(5%)-C催化剂对甲醇、乙醇、正丙醇和异丙醇氧化的阳极峰电流密度分别是Pd/C催化剂的1.7、1.4、1.7和1.3倍.Pd/Fe_3O_4(5%)-C催化剂对乙醇氧化的电荷传递电阻也远低于Pd/C催化剂.制备的所有催化剂对C1-C3醇类电氧化的电流密度大小排序如下:正丙醇乙醇甲醇异丙醇.此外,碳粉中Fe_3O_4纳米颗粒的存在提高了钯纳米颗粒的电化学稳定性.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.     

Synthesis of N-substituted carbazolones from α-iodo enaminones via Pd(0)-catalyzed intramolecular coupling under microwave irradiation

A variety of N-aryl and N-alkyl carbazolones were conveniently achieved in good to high yields via Pd₂(dba)₃-mediated intramolecular coupling of N-substituted α-iodo enaminones under microwave irradiation. The Pd(0)-catalyzed cyclization was found to proceed favorably with the more electron-deficient phenyl ring during the reactions involving unsymmetrical N,N-diaryl α-iodo enaminones. This unique property enables the construction of carbazolone skeleton containing nitro substituted benzenoid ring.     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Synthesis of substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles by intramolecular nitrilimine cycloaddition

Both substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles have been synthesized by the 3+2 intramolecular dipolar cycloaddition of nitrilimines to alkynes. This cyclization has been extended to more versatile 3-bromo derivatives by the use of alkynylbromides as dipolarophiles.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.