对称性降低的SiO2/Ag核壳结构纳米粒子的制备及表面增强拉曼活性研究

采用湿化学还原法在自组装的单层阵列二氧化硅纳米粒子表面沉积银膜制备了SiO2核/Ag帽复合纳米结构。通过透射电镜(TEM)、扫描电镜(SEM)、X射线衍射(XRD)和紫外-可见分光光度计(UV/Vis)研究和表征了该复合纳米结构的表面形貌、结构及光学性质。所制备的复合纳米粒子表面粗糙,其表面呈现无数纳米级谷粒状结构,SiO2内核粒径为350nm的银纳米帽的表面等离子共振吸收的2个共振峰分别位于382和689nm处。以亚甲基蓝作为探测分子研究了SiO2粒径为350和450nm的SiO2/Ag帽状复合纳米粒子的表面增强拉曼散射(SERS)活性,增强因子分别为3.6×109和3.9×109。结果表明,湿化学还原法制备的SiO2核/Ag帽复合纳米结构是很好的拉曼活性基底。     

帽状银纳米粒子的制备及表面增强拉曼活性研究

采用真空热蒸发法在自组装的单层阵列二氧化硅纳米粒子表面沉积银膜制备了帽状银纳米粒子。通过透射电镜(TEM)、扫描电镜(SEM)和紫外-可见-近红外分光光度计 (UV-Vis-NIR)对其表面形貌及光学性质进行了表征。以吡啶-(2-偶氮-4)间苯二酚作为探针分子，研究了该复合纳米粒子的表面增强拉曼散射 (SERS) 活性，增强因子高达2.88×10⁶。结果表明在二氧化硅纳米粒子表面制备的帽状银纳米粒子是很好的表面增强拉曼散射活性基底。     

基于表面增强拉曼光谱的重金属离子检测

以对巯基苯甲酸为拉曼标记和自组装修饰分子, 在光亮金基底上修饰后作为检测基底, 在金纳米粒子表面修饰后获得具有表面增强拉曼光谱信号的标记金溶胶. 修饰的基底及纳米离子通过重金属离子与羧基端的配位而发生相互作用, 最终形成“金属基底-对巯基苯甲酸/重金属离子/对巯基苯甲酸-金属纳米颗粒”的三明治结构. 采用扫描电镜表征纳米粒子的组装及以表面增强拉曼光谱检测表面标记分子的信号, 以此实现重金属离子的检测. 以强螯合剂EDTA溶液淋洗三明治结构, 使重金属离子与金属基底以及纳米颗粒上的羧基的配位作用断裂, 获得可再次利用的修饰金基底.     

利用去湿现象制备具有SERS活性的银纳米粒子图案

构建了具有表面增强拉曼散射(SERS)活性的二维有序环状与盘状的银纳米粒子结构, 利用CTAB包覆银纳米粒子的氯仿溶液直接在图案化的金基底上进行去湿, 当改变银纳米粒子的浓度时可以得到不同的图案. 利用原子力显微镜(AFM)对其结构进行了表征, 以4-巯基吡啶作为探针分子, 采用表面增强拉曼成像技术研究了这种基底的SERS活性, 这将为SERS的研究开拓新的领域.     

银纳米粒子有序自组装体中偶联分子的表面增强拉曼光谱研究

采用自组装方法,分别以1,4-二巯基苯和对巯基苯胺为偶联分子,在光滑银基底表面上构筑了银纳米粒子的单层和双层有序结构.表面增强拉曼光谱研究表明,在有序银纳米粒子组装体中偶联分子的拉曼散射得到很大增强,其中1,4-对巯基苯的拉曼散射增强效应主要来自光滑银基底表面与单层银纳米粒子间的电磁耦合,而对巯基苯胺的拉曼散射增强效应则主要由两层银纳米粒子之间耦合作用所致.两种不同的耦合作用所产生的增强效应大致相近.     

金纳米粒子修饰的氨基硅胶整体柱的制备及超灵敏表面增强拉曼散射检测

采用溶胶-凝胶法结合超分子模板技术, 以四乙氧基硅烷(TEOS)和3-氨丙基三乙氧基硅烷(APTES)作为反应前体, 以十六烷基三甲基溴化铵(CTMAB)为超分子模板, 简单快速地制备了一种新型氨基硅胶整体柱, 通过氨基将金纳米粒子组装在整体柱材料孔表面并用于表面增强拉曼散射(SERS)光谱分析. 以对巯基苯胺(PATP)和结晶紫(CV)为拉曼探针, 考察了金纳米粒子修饰的氨基硅胶整体柱用作SERS活性基底的性能. 结果表明, 该整体柱基底具有良好的SERS增强效应, 可检测到的PATP和CV的最低浓度分别为10^-9和10^-11 mol/L. 与金溶胶SERS基底相比, 本文制备的整体柱基底的检测灵敏度显著提高, 并具有良好的信号均一性, 是一种具有现场痕量检测应用潜力的SERS活性基底.     

纳米金汞核-壳粒子的电化学制备及其光谱性质

在聚乙烯吡啶修饰导电玻璃电极表面进行了金纳米粒子的二维单层结构组装,通过电沉积方法在金粒子表面制备了纳米汞壳层.研究结果表明,汞壳层的形成导致了内部金粒子表面等离子体共振的谱峰红移和强度衰减.吸附于汞壳表面的结晶紫分子因可承受被金核增强的电磁场,而使其拉曼散射得到极大的增强.     

基于光子晶体带边效应的表面增强拉曼基底

将光子晶体的带边效应与金纳米粒子的拉曼散射增强作用相结合,制备了一种新型光子晶体表面增强拉曼散射基底(PC-AuNPs),利用罗丹明B(RhB)作为报告分子,对所得基底性能进行检测.PC-AuNPs基底的制备包括3个步骤:在SiO2微球表面修饰氨基,再通过垂直沉降自组装得到蛋白石结构光子晶体(PC), 最后, 在光子晶体表面负载金纳米粒子(AuNPs).结果表明,光子晶体的带隙范围及AuNPs的负载量直接影响了PC-AuNPs基底的检测效果;以所得的PC-AuNPs基底测定RhB分子,其拉曼散射特征峰强度与浓度对数值呈现良好的线性关系,线性方程为I=1711lg[RhB(mol/L)]+15244,线性相关系数R2=0.9994,检出限为1×10-8 mol/L,表明此PC-AuNPs基底可用于目标物的定性及定量检测.本方法提高了传统拉曼散射光谱检测灵敏度,操作简单,具有良好的重现性,可为其它新型检测基底的制备提供.     

帽状铜纳米粒子的制备及表面增强拉曼散射活性研究

采用真空热蒸发法在SiO₂纳米粒子自组装单层膜上沉积铜薄膜制备了帽状铜纳米粒子。用扫描电镜、原子力显微镜和紫外-可见-近红外分光光度计对帽状复合纳米粒子的表面形貌和光学性质进行了表征。以亚甲基蓝和吡啶-(2-偶氮-4)间苯二酚为探针分子,研究了该复合纳米粒子的表面增强拉曼散射(SERS)活性。通过比较吸附在不同基底上的吡啶-(2-偶氮-4)间苯二酚的谱峰强度,探讨了SERS效应与表面等离子体共振(SPR)的关系。     

以Au/Cu纳米棒为基底的肺腺癌组织的特征表面增强拉曼光谱研究

通过金铜共混法制备了Au/Cu合金纳米棒,研究了铜掺杂对金纳米棒等离子体共振吸收和结构的影响,探究了Au/Cu合金纳米棒的等离子体共振拉曼增强效应.以Au/Cu合金纳米棒为基底对肺腺癌组织和癌旁正常组织进行了表面增强拉曼光谱检测.结果显示,癌变组织具有比癌旁正常组织更强的拉曼信号峰,位于1250,1344,1408,1568,1608和2560 cm~(-1)附近的拉曼峰分别与蛋白质的AmideⅡ氨基化合物、C—H弯曲振动、核酸中CH_3的对称变角振动、蛋白质色氨酸惰性环振动、蛋白质酰胺I谱带分子间反平行β-折叠的C—O健伸缩振动和蛋白质的巯基(S—H)伸缩振动有关,2936 cm~(-1)附近的拉曼峰为蛋白质CH_2的对称伸缩振动和CH_3的反对称伸缩振动共同作用产生.以铜掺杂的金纳米棒为基底的表面增强拉曼光谱法有望成为检测肺癌组织的有效手段.     

基于Au/SiO2纳米粒子的结晶紫表面增强拉曼特性研究

采用自组装-化学镀法制备了以SiO2为核,Au为壳层的核壳结构纳米粒子(Au/SiO2),以生物染色剂结晶紫为探针分子,研究了Au/SiO2的表面增强拉曼散射(SERS)效应,并考察了Cl-对SERS增强效应的影响。实验表明,Cl-对SERS有明显的增强效果,这主要是由于Cl-的加入使得Au/SiO2发生团聚,产生大量"热点",从而使SERS增强效果进一步加强。以Au/SiO2(5×1010 mL-1)为活性基底,KCl(0.01 mol/L)为额外增强剂,在水溶液中实现了对结晶紫(CV)的痕量检出,最低检测浓度可达到5×10-10mol/L。     

Growth-sensitive 3D ordered gold nanoshells precursor composite arrays as SERS nanoprobes for assessing hydrogen peroxide scavenging activity

A novel method based on surface-enhanced Raman scattering (SERS) was developed to estimate the antioxidant activity of antioxidants by using self-assembled three-dimensionally (3D) ordered gold nanoparticles (GNPs) precursor composite (SiO(2)/GNPs) arrays as nanoprobes. H(2)O(2) could reduce AuCl(4)(-) to Au(0) which deposited onto the surface of the SiO(2)/GNPs arrays and enlarged the GNPs. As the concentration of H(2)O(2) increased, the surface coverage of the resultant gold on the silica cores increased accordingly until continuous gold nanoshells (GNSs) were formed. The change of the intensities of the SERS spectra correlated well with H(2)O(2) concentration which indicated that this SiO(2)/GNPs array was a potential SERS nanoprobe for H(2)O(2). The presence of antioxidant will prevent the growth of GNPs on the surface of the silica arrays from forming the structure which has strongest SERS-activity and the corresponding change in SERS intensity correlated well with the H(2)O(2) scavenging activity of the antioxidants. The H(2)O(2) scavenging activities of four plant-based antioxidants, tannic acid, citric acid, ferulic acid, and tartaric acid were studied. Our results showed the H(2)O(2) scavenging activities (SA(HP) values) of these four compounds were: tannic acid > ferulic acid > citric acid > tartaric acid.     

Alkanethiol-induced structural rearrangements in silica-gold core-shell-type nanoparticle clusters: an opportunity for chemical sensor engineering

Electrostatically bonded SiO2.Au nanoparticle clusters form by reaction of 3-aminopropylsilane-modified SiO2 spheres (470 nm) with citrate-coated gold nanoparticles (9.7 nm) in water. Reaction of the clusters with 0.01 M KBr or HCl solution induces desorption of the gold nanoparticles within minutes. Reaction of the clusters with alkanethiols CnH2n+1SH (n = 2-18) at 80 degrees C causes the gold nanoparticles to form stringlike gold nanoparticle structures for thiols with short alkane groups (n = 2, 3, 4) and hexagonally packed arrays of gold nanoparticles for thiols with long alkane groups (n = 5-18) on the silica surfaces. The structural changes indicate that the bonding between Au and SiO2 nanoparticles has changed from electrostatic to van der Waals. Elemental analyses show that the reaction with hexanethiol does not affect the Au/Si/O composition of the SiO2.Au cluster, and Raman spectra on the hexanethiol-reacted cluster indicate the formation of a thiol SAM on the gold nanoparticles. The thiol-reacted SiO2.Au clusters display characteristic shifts of the absorption maxima in the visible spectra, and there is an inverse relation between these shifts and the lengths of the alkyl groups in the thiols. This relationship can be understood in terms of the free electron model for metals. The use of SiO2.Au nanoparticle clusters as coulometric sensors for the qualitative detection of thiols is discussed.     

Surface-enhanced Raman scattering of single- and few-layer graphene by the deposition of gold nanoparticles

Surface-enhanced Raman scattering (SERS) of graphene on a SiO(2)(300 nm)/Si substrate was investigated by depositing Au nanoparticles using thermal evaporation. This provided a maximum enhancement of 120 times for single-layer graphene at 633 nm excitation. SERS spectra and scan images of single-layer and few-layer graphene were acquired. Single-layer graphene provides much larger SERS enhancement compared to few-layer graphene, while in single-layer graphene the enhancement of the G band was larger than that of the 2D band. Furthermore, the D bands were identified in the SERS spectra; these bands were not observed in a normal Raman spectrum without Au deposition. Appearance of the D band is ascribed to the considerable SERS enhancement and not to an Au deposition-induced defect. Lastly, SERS enhancement of graphene on a transparent glass substrate was compared with that on the SiO(2)(300 nm)/Si substrate to exclude enhancement by multiple reflections between the Si substrate and deposited Au nanoparticles. The contribution of multiple reflections to total enhancement on the SiO(2)(300 nm)/Si substrate was 1.6 times out of average SERS enhancement factor, 71 times.     

金纳米粒子与聚吡咯纳米管的复合及其SERS效应研究

通过柠檬酸盐与HAuCl4水溶液在微沸状态下反应制备的金纳米粒子因其特殊的表面与界面效应在光学、生物学和催化化学领域得到了广泛应用,而聚吡咯(PPy)具有环境稳定性好、电导率高且变化范围大、容易合成等优点,聚吡咯纳米管可用作导电材料、酶封装材料、抗静电材料,也可用于制备传感器、传动器、固体电解质电容器等。     

New preparation method of gold nanoparticles on SiO2

It is shown that adsorption of the [Au(en)(2)](3+) cationic complex can be successfully employed for the deposition of gold nanoparticles (1.5 to 3 nm) onto SiO(2) with high metal loading, good dispersion, and small Au particle size. When the solution pH increases (from 3.8 to 10.5), the Au loading in the Au/SiO(2) samples increases proportionally (from 0.2 to 5.5 wt %), and the average gold particle size also increases (from 1.5 to 2.4 nm). These effects are explained by the increase in the amount of negatively charged sites present on the SiO(2) surface, namely, when the solution pH increases, a higher number of [Au(en)(2)](3+) species can be adsorbed. Extending the adsorption time from 2 to 16 h gives rise to an increase in the gold loading from 3.3 to 4.0 wt % and in the average particle size from 1.8 to 2.9 nm. Different morphologies of gold nanoparticles are present as a function of the particle size. Particles with a size of 3-5 nm show defective structure, some of them having a multiple twinning particle (MTP) structure. At the same time, nanoparticles with an average size of ca. 2 nm exhibit defect-free structure with well-distinguishable {111} family planes. TEM and HAADF observations revealed that Au particles do not agglomerate on the SiO(2) support: gold is present on the surface of SiO(2) only as small particles. Density functional theory calculations were employed to study the mechanisms of [Au(en)(2)](3+) adsorption, where neutral and negatively charged silica surfaces were simulated by neutral cluster Si(4)O(10)H(4) and negatively charged cluster Si(4)O(10)H(3), respectively. The calculation results are totally consistent with the suggestion that the deposition of gold takes place according to a cationic adsorption mechanism.     

Surface-enhanced Raman scattering of EDOT and PEDOT on silver and gold nanoparticles

Surface-enhanced Raman scattering (SERS) spectra of the conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT) and its monomer 3,4-ethylenedioxythiophene (EDOT) on Ag and Au nanoparticles presenting different morphologies and stabilizing agents have been obtained using the excitation radiation at 633 nm. The SERS spectra of the monomer and polymer are strongly dependent both on the metal and capping agent of the substrate. SERS spectra of EDOT on Au nanospheres indicates that adsorption occurs with the thiophene ring perpendicular to the metal surface. In contrast, polymerization takes place on the silver surface of Ag nanospheres. EDOT adsorption on Ag nanoprisms with polyvinylpyrrolidone (PVP) as capping agent occurs similarly to that observed on gold. Surface-enhanced resonance Raman scattering (SERRS) spectra of PEDOT on gold nanostars that present a thick layer of PVP show no chemical interaction of PEDOT with the metal surface; however, when PEDOT is adsorbed on citrate stabilized gold nanospheres, the SERRS spectra suggest that thiophene rings are perpendicular to the surface. Oxidation of PEDOT also is observed on Ag nanospheres. The investigation of the interface between PEDOT and metal surface is crucial for the development in polymer-based optoelectronic devices since this interface plays a crucial role in their stability and performance.     

Characteristics of Cl‐ and Au‐Containing Nanocomplex and Its Effect on the Following Electrodeposition of Polypyrrole

In this study, polypyrrole (PPy) films were electrochemically deposited on gold substrates roughened by a triangular‐wave oxidation‐reduction cycle (ORC) with different anodic and cathodic vertexes in an aqueous solution containing 0.1 N NaCl. In ORC treatment, the Cl‐ and Au‐containing nanocomplex was formed on the surface of gold. The results indicate that the crystalline orientation and diameter of Au are significantly different before and after ORC treatment. Also the redox behavior in ORC, surface morphology formed and depth profile of Cl in the nanocomplex are influenced by the anodic and cathodic vertexes used in roughening Au. The roughened Au demonstrates an electrocatalytic activity for pyrrole polymerization. Correspondingly, the characteristics of PPy films electrodeposited on these roughened Au substrates are notable. They include the surface‐enhanced Raman scattering (SERS) effect shown, a higher conductivity obtained and an increase in oxidation level demonstrated.     

Polarization modulation infrared reflection absorption spectroscopy investigations of thin silica films deposited on gold. 2. Structural analysis of a 1,2-dimyristoyl-sn-glycero-3-phosphocholine bilayer

In this paper we report on the structural analysis of bilayers of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) using polarization modulation infrared reflection absorption spectroscopy (PM IRRAS). The lipid bilayers were formed on SiO2|Au and Au surfaces using the Langmuir-Blodgett and Langmuir-Schaeffer techniques. As we showed in part 1 (Zawisza, I.; Wittstock, G.; Boukherroub, R.; Szunertis, S. Langmuir 2007, 23, 9303-9309), SiO2 layers of 7 nm thickness, synthesized by plasma-enhanced chemical vapor deposition on 200 nm thick gold covered glass slides, allow PM IRRAS investigations. Only minor changes in the order and structure of the lipid bilayer are observed when deposited on SiO2|Au and Au surfaces. The choline moiety in the leaflet directed toward the SiO2 surface exists in trans conformation and shows a tilt of 28 degrees with the surface normal of the CN bond. On the silica surface in the second leaflet directed toward air and in two layers deposited on the Au surface, trans and gauche isomers of the choline moiety are present and the tilt of the CN bond increases to 55 degrees with respect to the surface normal. The order and molecular orientation in the DMPC bilayers on SiO2 and Au surfaces are not affected by time. The analysis of the phosphate stretching mode on the Au surface shows slight dehydration of this group and reorientation of the phosphate moiety.