碳纳米管纳米分子印迹聚合物传感器的制备及对血液中葡萄糖的测定

以葡萄糖为模板分子,通过电聚合邻苯二胺,在多壁碳纳米管修饰的GC电极表面制备了一种对葡萄糖具有选择性响应的分子印迹聚合薄膜传感器,优化了制备方法。通过循环伏安法(CV)和交流阻抗法对该分子印迹传感器对葡萄糖的响应性能进行了表征。在最优实验条件下,该印迹电极能在6.0~560.0μmol/L浓度范围内对葡萄糖进行检测,检出限为8.0×10~(-7) mol/L,并可在其他物质存在下选择性识别葡萄糖。此传感器可用于血液中葡萄糖的测定,加标回收率为98.5%~103.3%。     

多壁碳纳米管-分子印迹传感器测定盐酸克伦特罗

结合碳纳米材料和分子印迹技术,建立了以K3[Fe(CN)6]为探针测定盐酸克伦特罗的方法。以邻苯二胺为功能单体,盐酸克伦特罗为模板,采用电化学聚合法在多壁碳纳米管修饰电极表面制备了分子印迹薄膜。用乙腈水溶液可快速去除模板,得到多壁碳纳米管-分子印迹传感器。用循环伏安法、交流阻抗法和石英晶体微天平技术对印迹膜进行了表征,膜厚为12.3 nm。K3[Fe(CN)6]的相对峰电流与盐酸克伦特罗的浓度在4.0×10-8～6.6×10-6 mol/L范围内呈线性关系,检测限为8.1×10-9 mol/L。选择性实验表明传感器对结构类似物具有较强的抗干扰能力。此传感器可用于猪肉中盐酸克伦特罗的测定,加标回收率为101.3%～107.9%。     

电聚合分子印迹传感器选择性测黑茶中槲皮素的含量

以槲皮素作为模板分子,邻氨基苯酚作为功能单体,在金电极表面通过电聚合法,制备了具有选择性识别槲皮素的分子印迹传感器。采用循环伏安法、差分脉冲伏安法研究了印迹膜的性能、结构和分子印迹效应。对功能单体与模板分子的配比、洗脱时间和印迹时间等实验参数进行了优化,并与其结构相似的化合物芦丁的选择性响应进行了比较,发现该传感器对槲皮素分子具有良好的选择性。槲皮素浓度在6.0×10-6~1.0×10-4mol/L范围内与峰电流呈线性关系,线性方程为:I(μA)=27.79+9.48lgc(mol/L)(R=0.9939),检出限为2.0×10-6mol/L。用此传感器测定黑茶中槲皮素含量的结果较为满意。     

利用分子印迹传感器选择性测定绿麦隆

以绿麦隆为模板分子,邻氨基酚为功能单体,在金电极表面电聚合制得具有特异性识别孔穴的绿麦隆分子印迹膜。采用循环伏安、差分脉冲伏安法研究了印迹膜的性能、结构、分子印迹效应和模板分析物,并比较了传感器对其它结构相似化合物的选择性响应,发现该传感器对绿麦隆检测具有良好的选择性。绿麦隆浓度在3.0×10-7~1.5×10-6mol/L范围内与峰电流呈线性关系,检出限为1.0×10-7mol/L,在干扰物质共存情况下的回收率为105%~116%。     

桑色素分子印迹传感器的制备与应用

以邻氨基酚( o-AP)为功能单体,桑色素为模板分子,基于分子间的相互作用力,在金电极表面电聚合制备具有特异性识别孔穴的桑色素分子印迹传感器膜。采用循环伏安法( CV)、差分脉冲伏安法( DPV)等研究了分子印迹膜的性能和分子印迹效应。探索了聚合膜配比及聚合扫描圈数对传感器性能的影响,优化了洗脱时间和印迹时间。比较了此传感器对其结构相似物的选择性响应,发现其对桑色素检测具有良好的选择性。在最佳实验条件下,此传感器对桑色素浓度定量测定范围为0.05~1.70μmol/L,线性方程为I(μA)=1.0800lgc(mol/L)+9.3599, R=0.9934,检出限为0.01μmol/L。用此传感器测定黑茶样品中桑色素的含量,加标回收率为104.0%~108.0%。     

自组装碳纳米管-氯洁霉素分子印迹溶胶-凝胶电化学传感器研究

结合自组装技术, 采用电聚合方法在碳纳米管修饰金电极表面制备对氯洁霉素具有特异性识别位点的分子印迹溶胶-凝胶薄膜, 成功构建了一种新型印迹溶胶-凝胶电化学传感器. 通过循环伏安法(CV)、示差脉冲法(DPV)、安培计时法(I-t)和扫描电镜(SEM)表征了该印迹溶胶-凝胶膜的电化学性能和表面形貌. 结果表明, 该传感器具有良好的选择性和灵敏度, 氯洁霉素在多壁碳纳米管修饰的印迹溶胶-凝胶传感器上的响应明显提高. 该印迹溶胶-凝胶传感器对氯洁霉素的浓度响应线性范围为5.0×10^-7~8.0×10^-5 mol/L, 检出限为2.44×10^-8 mol/L. 该传感器被成功地用于人体尿液中氯洁霉素的分析测定.     

基于石墨烯-纳米金修饰分子印迹传感器测定黑茶中芦丁

在金电极表面滴涂石墨烯(GR),通过电沉积技术沉积纳米金(Au)构成石墨烯-纳米金修饰电极(Au-GR/GE)。以芦丁为模板分子,邻氨基酚为功能单体,通过电聚合反应在Au-GR/GE表面合成一种对芦丁具有特异性识别能力的分子印迹传感器膜(MIP)。采用循环伏安法(CV)、差分脉冲伏安法(DPV)研究了印迹膜的性能、结构和分子印迹效应,并与槲皮素进行了选择性响应的比较,发现此传感器对芦丁具有良好的选择性。在最佳实验条件下,其对芦丁浓度的定量测定线性范围为6.30×10-7~1.70×10-4mol/L,线性方程为I(μA)=3.8136-8.6247 lg c(mol/L),R=0.9961,检出限为2.10×10-7mol/L。     

氨基脲分子印迹电化学传感器的制备及应用

以氨基脲(SEM)为模板分子,邻苯二胺为功能单体,在0.1 mol/L NaAc-HAc缓冲液(pH 5.2)中,通过电聚合法制备分子印迹传感器.采用循环伏安法(CV)、差分脉冲法(DPV)、电化学阻抗谱(EIS)和扫描电镜表征了此分子印迹传感器的识别性能和表面形貌.结果表明,此传感器具有粗糙、多孔的形貌,对SEM具有良好的选择性识别.在0.5 mol/L KCl-0.005 mol/L K3[Fe(CN)6]溶液中,采用DPV方法考察了功能单体与模板分子的摩尔比、模板洗脱剂、洗脱时间和温育时间对传感器响应的影响.优化后的实验条件为:功能单体与模板分子的摩尔比1:2,洗脱液为0.2 mol/L NaOH,洗脱时间15 min,温育时间12 min.在优化的实验条件下,传感器的DPV峰电流差值与SEM的浓度在3.75～ 188 ng/L范围呈良好的线性关系,检出限为1.5 ng/L(S/N=3).将此传感器应用于市售新鲜虾肌肉及受污染虾肌肉中SEM含量测定,加标回收率为80％～97％.     

磁性石墨烯修饰辛基酚印迹传感器制备及应用研究

以辛基酚(4-OP)为模板分子,多巴胺为功能单体,采用电聚合技术在磁性石墨烯修饰碳电极表面制备对辛基酚具有高选择性与灵敏性的印迹电化学传感器。采用循环伏安法(CV)和差分脉冲伏安法(DPV)对此印迹传感器的电化学性能进行详细表征;采用扫描电子显微技术对修饰电极的形貌进行表征。结果表明,此印迹电化学传感器对辛基酚具有良好的特异识别性能。采用 DPV 法考察了孵化时间和洗脱溶剂对印迹传感器性能影响,结果表明,最佳孵化时间为14 min。此印迹电化学传感器的响应电流(△IR )与辛基酚在5.0×10-6~5.0×10-9 mol/ L 范围内浓度的负对数(-lgC)呈良好的线性关系,线性方程为△IR ( mA)=-0.25lgC(mol/ L)+2.35,检出限为3.64×10-10 mol/ L (S/ N=3)。此印迹电化学传感器对辛基酚具有良好的选择性和灵敏性,成功用于实际水样中辛基酚的检测,回收率为96.0%~104.0%。     

盐酸阿霉素分子印迹传感器的制备及识别特性

采用自组装以及电聚合的方法,在磷酸盐缓冲液(PBS)中以3,4-乙烯二氧噻吩(EDOT)为功能单体,盐酸阿霉素(DOX)为模板,在金电极表面电聚合制备DOX印迹敏感膜(MIPs),构建了一种选择性检测DOX的分子印迹电化学传感器.采用循环伏安法(CV)及交流阻抗法(EIS)对其性能进行了表征.优化实验条件后,在含0.005 mol/L K3[Fe(CN)_6]及0.1 mol/L KCl的PBS中,应用差分脉冲伏安法(DPV)测试了该传感器的响应性能.实验结果表明,该传感器检测DOX的线性范围为4.0×10~(-7)~1.0×10~(-6)mol/L,相关系数为0.9967,检出限(S/N=3)达6.5×10~(-8)mol/L;采用电化学洗脱法可使传感器再生,对DOX的测定具有良好重现性及稳定性;该传感器对于干扰物长春碱、放线菌素D及5-氟尿嘧啶有微弱的电流响应,显示出良好的选择性.将该传感器用于人体血样中盐酸阿霉素的分析,回收率为96.0%~106.7%,表明其具有潜在的实用价值.     

A Polypyrrole‐Imprinted Electrochemical Sensor Based on Nano‐SnO2/Multiwalled Carbon Nanotubes Film Modified Carbon Electrode for the Determination of Oleanolic Acid

A sensitive molecularly imprinted electrochemical sensor with specific recognition ability for oleanolic acid was synthesized by modification of multiwalled carbon nanotubes (MWNTs) decorated with tin oxide nanoparticles (nano‐SnO₂/MWNTs) and polypyrrole‐imprinted polymer on a carbon electrode. The morphology and electrochemical performance of the imprinted sensor were investigated by using scanning electron microscope (SEM), X‐ray diffraction (XRD), cyclic voltammetry (CV), linear sweep voltammetry (LSV) and amperometric i–t curve. The results showed that the imprinted sensor displayed excellent selectivity toward oleanolic acid. A linear relationship between the response currents and oleanolic acid concentrations ranging from 5.0×10^?8 g/L to 2.0×10^?5 g/L was obtained for the imprinted sensor. The limit of detection (LOD) of the imprinted sensor toward oleanolic acid was calculated as 8.6×10^?9 g/L at a signal to noise ratio (S/N) of 3. This imprinted sensor was successfully applied to the determination of oleanolic acid in Acitinidia deliciosa root samples.     

氧化石墨烯/富勒烯复合材料增敏多金属离子印迹电化学传感器

制备了一种对Pb(Ⅱ)、Cd(Ⅱ)和Cu(Ⅱ)等多金属离子具有灵敏、选择性响应的新型印迹传感器。 以甲基丙烯酸与乙二胺四乙酸分别为功能单体与配体,乙二醇二甲基丙烯酸酯为交联剂制备出多金属离子印迹聚合物。 采用滴涂法将离子印迹聚合物均匀地修饰至氧化石墨烯/富勒烯复合材料修饰碳电极表面,成功制备出灵敏的多金属离子印迹电化学传感器。 采取循环伏安法、交流阻抗和差分脉冲法等技术对印迹电化学传感器的性能进行表征,结果表明该多金属离子印迹电化学传感器具有良好的选择性。 在1.0×10^-9~5.0×10^-7 mol/L范围内,该多金属离子印迹电极的响应电流与金属离子浓度呈现良好的线性关系,对Pb(Ⅱ)、Cd(Ⅱ)和Cu(Ⅱ)金属离子的最低检测限分别为5.0×10^-10、5.0×10^-10和1.0×10^-10 mol/L。 该多金属离子印迹电化学传感器成功用于实际样品中微量Pb(Ⅱ)、Cd(Ⅱ)和Cu(Ⅱ)等金属离子的检测。     

Sol-Gel Imprinted Polymers Based Electrochemical Sensor for Paracetamol Recognition and Detection

Molecular imprinting and sol-gel technique were combined to develop a molecular imprinted polymer (MIP) based electrochemical sensor in this work. With the successive modification of multi-walled carbon nanotubes (MWNTs) and gold nanoparticles (GNPs), a modified glassy carbon electrode (GCE) was immersed in a sol-gel solution in the presence of paracetamol (PR) for the electropolymerization to fabricate an imprinted sensor. Scanning electron microscopy (SEM), electrochemical impedance spectroscopy (EIS), and differential pulse voltammetry (DPV) were employed to characterize the constructed sensor. The factors for the sensor preparation, the electropolymerization potential range, the monomer concentration, and the scan rate for the sensor preparation were optimized. The sensor displayed an excellent recognition capacity toward PR compared with other analogues. Additionally, the DPV peak current was linear to the PR concentration in the range from 8.0 × 10^?8 to 5.0 × 10^?5 mol/L, with a detection limit of 4.0 × 10^?8 mol/L. The prepared sensor also showed satisfactory reproducibility and regeneration capacity.     

分子印迹电化学传感器检测水杨酸

以水杨酸(SA)为模板分子,邻苯二胺(o-PPD)及吡咯(Py)为复合功能单体,在石墨烯修饰的玻碳电极表面制备分子印迹电化学传感器(MIP/GO/GCE),用扫描电镜(SEM)观察印迹膜的表面形貌,方波伏安法(SWV)和循环伏安法(CV)对分子印迹传感器的性能进行表征。通过优化实验条件,显示SA浓度在1.0×10-8~1.0×10-2 mol/L范围内,分子印迹传感器峰电流与SA浓度负对数具有良好的线性关系,检出限为8.6×10-9 mol/L。该传感器对SA具有良好的选择性,样品回收率为101%~106%,相对标准偏差(RSD)为3.8%。SA分子印迹传感器的制备简单、抗干扰性好、灵敏度高、成本低廉,具有较好实用价值。     

基于多壁碳纳米管/纳米铜复合材料的电化学传感器测定槐米中芦丁

以Nafion-多壁碳纳米管(MWNTs)薄膜修饰玻碳电极,采用恒电位法在其表面电沉积纳米Cu,研制了一种新型的芦丁电化学传感器。采用循环伏安法和电化学阻抗谱研究传感器在铁氰化钾-亚铁氰化钾体系中的电化学行为,以考察传感器的电化学性能,采用扫描电镜对传感器表面的形态进行了研究,并利用差分脉冲伏安法测定芦丁的含量。实验结果表明,该传感器对芦丁有较好的催化作用。在优化实验条件下,对芦丁检测的线性范围为1.0×10-8~1.0×10-6 mol/L,检出限为8.4×10-9 mol/L(S/N=3),回收率为98.1%~101%,该传感器制作简单,线性范围宽,灵敏度高,为槐米等样品中芦丁含量的检测提供了一种新的、行之有效的方法。     

Construction of a novel electrochemical sensor based on molecularly imprinted polymers for the selective determination of chlorpyrifos in real samples

We present a novel electrochemical sensor based on an electrode modified with molecularly imprinted polymers for the detection of chlorpyrifos. The modified electrode was constructed by the synthesis of molecularly imprinted polymers by a precipitation method then coated on a glassy carbon electrode. The surface morphology of the modified electrode was characterized by using field‐emission scanning electron microscopy and transmission electron microscopy. The performance of the imprinted sensor was thoroughly investigated by using cyclic voltammetry and differential pulse voltammetry. The imprinted electrochemical sensor displayed high repeatability, stability, and selectivity towards the template molecules. Under the optimal experimental conditions, the peak current response of the imprinted electrochemical sensor was linearly related to the concentration of chlorpyrifos over the range 1 × 10⁻¹⁰–1 × 10⁻⁵ mol/L with a limit of detection of 4.08 × 10⁻⁹ mol/L (signal‐to‐noise ratio = 3). Furthermore, the proposed molecularly imprinted electrochemical sensor was applied to the determination of chlorpyrifos in the complicated matrixes of real samples with satisfactory results. Therefore, the molecularly imprinted polymers based electrochemical sensor might provide a highly selective, rapid, and cost‐effective method for chlorpyrifos determination and related analysis.     

氯丙嗪分子印迹敏感膜传感器的制备与应用

以氯丙嗪为模板分子,邻氨基酚为功能单体,在金电极表面电聚合制备具有特异性识别孔穴的氯丙嗪分子印迹敏感膜(MIP)。 采用循环伏安法(CV)、差分脉冲伏安法(DPV)等研究了印迹膜的性能、结构和分子印迹效应,并与其结构相似的化合物奋乃静和异丙嗪的选择性响应进行了比较,发现传感器对氯丙嗪具有良好的选择性。 氯丙嗪浓度在6.0×10-7～9.0×10-5 mol/L范围内与峰电流呈线性关系,线性方程为:I(μA)=61.25lg c(μmol/L)+23.47(r=0.9975),根据DL=3δb/s计算检出限为2.0×10-7 mol/L,该传感器具有良好的重复性、再生性和高灵敏度。     

利巴韦林原位聚合分子印迹电化学传感器的研制

利用原位聚合分子印迹技术,以3-氨基苯硼酸(3-ABBA)为功能单体,利巴韦林(RIB)为目标分子,以硼酸和顺式二醇在不同酸碱度条件下可逆形成环内酯键为原理,在玻碳电极表面原位聚合形成利巴韦林分子印迹膜,研制了测定利巴韦林的分子印迹电化学传感器。采用循环伏安法(CV)和差分脉冲法(DPV)对印迹膜性能进行研究。DPV测试表明:在最优实验条件下,利巴韦林的浓度在5.0×10~(-8)~1.0×10~(-5)mol/L范围内与峰电流呈良好的线性关系,相关系数(r~2)为0.995 3,检出限(S/N=3)为1.5×10~(-8)mol/L。特异性实验表明制备的传感器对利巴韦林的选择性良好。该分子印迹电化学传感器可用于食品中利巴韦林的检测。     

Determination of Oxytetracycline with a Gold Electrode Modified by Chitosan-Multiwalled Carbon Nanotube Multilayer Films and Gold Nanoparticles

A molecularly imprinted electrochemical sensor was fabricated based on a gold electrode modified by chitosan-multiwalled carbon nanotube composite (CS-MWCNTs) multilayer films and gold nanoparticles (AuNPs) for convenient and sensitive determination of oxytetracycline (OTC). The multilayer of CS-MWCNTs composites and AuNPs were used to augment electronic transmission and sensitivity. The molecularly imprinted polymers (MIPs) were synthesized using OTC as the template molecule and o-phenylenediamine (OPD) as the functional monomer. They were modified on a gold electrode by electropolymerization. The electrochemical behavior of OTC at the imprinted sensor was characterized by cyclic voltammetry (CV), scanning electron microscopy (SEM), and amperometry. The molecularly imprinted sensor showed high selectivity and excellent stability toward OTC. The linear range was from 3.0 × 10^?8 to 8.0 × 10^?5 mol/L, with a limit of detection (LOD) of 2.7 × 10^?8 mol/L (S/N = 3). The developed sensor showed good recovery in spiked samples analysis.