Synthesis of Mixed Silylene–Carbene Chelate Ligands from N‐Heterocyclic Silylcarbenes Mediated by Nickel

The Ni^II‐mediated tautomerization of the N‐heterocyclic hydrosilylcarbene L²Si(H)(CH₂)NHC 1 , where L²=CH(C?CH₂)(CMe)(NAr)₂, Ar=2,6‐iPr₂C₆H₃; NHC=3,4,5‐trimethylimidazol‐2‐yliden‐6‐yl, leads to the first N‐heterocyclic silylene (NHSi)–carbene (NHC) chelate ligand in the dibromo nickel(II) complex [L¹Si:(CH₂)(NHC)NiBr₂] 2 (L¹=CH(MeC?NAr)₂). Reduction of 2 with KC₈ in the presence of PMe₃ as an auxiliary ligand afforded, depending on the reaction time, the N‐heterocyclic silyl–NHC bromo Ni^II complex [L²Si(CH₂)NHCNiBr(PMe₃)] 3 and the unique Ni⁰ complex [η²(Si‐H){L²Si(H)(CH₂)NHC}Ni(PMe₃)₂] 4 featuring an agostic Si? H→Ni bonding interaction. When 1,2‐bis(dimethylphosphino)ethane (DMPE) was employed as an exogenous ligand, the first NHSi–NHC chelate‐ligand‐stabilized Ni⁰ complex [L¹Si:(CH₂)NHCNi(dmpe)] 5 could be isolated. Moreover, the dicarbonyl Ni⁰ complex 6 , [L¹Si:(CH₂)NHCNi(CO)₂], is easily accessible by the reduction of 2 with K(BHEt₃) under a CO atmosphere. The complexes were spectroscopically and structurally characterized. Furthermore, complex 2 can serve as an efficient precatalyst for Kumada–Corriu‐type cross‐coupling reactions.     

General and Mild Ni0‐Catalyzed α‐Arylation of Ketones Using Aryl Chlorides

A general methodology for the α‐arylation of ketones using a nickel catalyst has been developed. The new well‐defined [Ni(IPr*)(cin)Cl] ( 1 c ) pre‐catalyst showed great efficiency for this transformation, allowing the coupling of a wide range of ketones, including acetophenone derivatives, with various functionalised aryl chlorides. This cinnamyl‐based Ni–N‐heterocyclic carbene (NHC) complex has demonstrated a different behaviour to previously reported NHC‐Ni catalysts. Preliminary mechanistic studies suggest a Ni⁰/Ni^II catalytic cycle to be at play.     

NHC/Nickel(II)‐Catalyzed [3+2] Cross‐Dimerization of Unactivated Olefins and Methylenecyclopropanes

Cross‐dimerization of a methylenecyclopropane ( 1 ) and an unactivated alkene ( 2 ) with typical hydroalkenylation reactivity was observed for the first time by using a [NHC‐Ni(allyl)]BAr^F catalyst (NHC=N‐heterocyclic carbene). Results show that the C?C cleavage of 1 did not involve a Ni⁰ oxidative addition, which was crucial in former systems. Thus the method reported here emerges as a complementary method for attaining highly chemo‐ and regioselective synthesis of methylenecyclopentanes ( 3 ) with broad scope. An efficient NHC/Ni^II‐catalyzed rearrangement of 1 leads to the convergent synthesis of 3 in the presence of 2 .     

Synthesis of a Metallo‐Iminosilane via a Silanone–Metal π‐Complex

Facile oxygenation of the acyclic amido‐chlorosilylene bis(N‐heterocyclic carbene) Ni⁰ complex [{N(Dipp)(SiMe₃)ClSi:→Ni(NHC)₂] ( 1 ; Dipp=2,6‐ⁱPr₂C₆H₄; N‐heterocyclic carbene=C[(ⁱPr)NC(Me)]₂) with N₂O furnishes the first Si‐metalated iminosilane, [DippN=Si(OSiMe₃)Ni(Cl)(NHC)₂] ( 3 ), in a rearrangement cascade. Markedly, the formation of 3 proceeds via the silanone (Si=O)–Ni π‐complex 2 as the initial product, which was predicted by DFT calculations and observed spectroscopically. The Si=O and Si=N moieties in 2 and 3 , respectively, show remarkable hydroboration reactivity towards H−B bonds of boranes, in the former case corroborating the proposed formation of a (Si=O)–Ni π‐complex at low temperature.     

N‐Heterocyclic Carbene Ligand‐Enabled C(sp3)−H Arylation of Piperidine and Tetrahydropyran Derivatives

Pd^II‐catalyzed C(sp³)?H arylation of saturated heterocycles with a wide range of aryl iodides is enabled by an N‐heterocyclic carbene (NHC) ligand. A C(sp³)?H insertion step by the Pd^II/NHC complex in the absence of ArI is demonstrated experimentally for the first time. Experimental data suggests that the previously established NHC‐mediated Pd⁰/Pd^II catalytic manifold does not operate in this reaction. This transformation provides a new approach for diversifying pharmaceutically relevant piperidine and tetrahydropyran ring systems.     

Synthesis and Evaluation of Ruthenium 2‐Alkyl‐6‐mercaptophenolate Catalysts for Olefin Metathesis

A series of ruthenium carbene catalysts containing 2‐sulfidophenolate bidentate ligand with an ortho‐substituent next to the oxygen atom were synthesized. The molecular structure of ruthenium carbene complex containing 2‐isopropyl‐6‐sulfidophenolate ligand was confirmed through single crystal X‐ray diffraction. An oxygen atom can be found in the opposite position of the N‐heterocyclic carbene (NHC) based on the steric hindrance and strong trans‐effects of the NHC ligand. The ruthenium carbene catalyst can catalyze ring‐opening metathesis polymerization (ROMP) reaction of norbornene with high activity and Z‐selectivity and cross metathesis (CM) reactions of terminal alkenes with (Z)‐but‐2‐ene‐1,4‐diol to give Z‐olefin products (Z/E ratios, 70:30–89:11) in low yields (13%–38%). When AlCl₃ was added into the CM reactions, yields (51%–88%) were considerably improved and process becomes highly selective for E‐olefin products (E/Z ratios, 79:21–96:4). Similar to other ruthenium carbene catalysts, these new complexes can tolerate different functional groups.     

Highly Stable Water‐Soluble Platinum Nanoparticles Stabilized by Hydrophilic N‐Heterocyclic Carbenes

Controlling the synthesis of stable metal nanoparticles in water is a current challenge in nanochemistry. The strategy presented herein uses sulfonated N‐heterocyclic carbene (NHC) ligands to stabilize platinum nanoparticles (PtNPs) in water, under air, for an indefinite time period. The particles were prepared by thermal decomposition of a preformed molecular Pt complex containing the NHC ligand and were then purified by dialysis and characterized by TEM, high‐resolution TEM, and spectroscopic techniques. Solid‐state NMR studies showed coordination of the carbene ligands to the nanoparticle surface and allowed the determination of a ¹³C–¹⁹⁵Pt coupling constant for the first time in a nanosystem (940 Hz). Additionally, in one case a novel structure was formed in which platinum(II) NHC complexes form a second coordination sphere around the nanoparticle.     

Copper,Silver and Sodium Salt‐Mediated Quaternization by Arylation: Syntheses of N‐Heterocyclic Carbene Precursors and 6‐H‐Phenanthridine Derivatives

We have developed a Cu^II‐, Ag^I‐, and NaOTf‐mediated intramolecular quaternization by arylation reactions to synthesize a variety of N‐heterocyclic carbene (NHC) precursors with a benzene‐fused backbone. The methodology also provides a convenient alternative route for the synthesis of 6‐H‐phenanthridine derivatives. A novel silver–NHC complex was prepared by treatment of Ag₂O with the free carbene, which was in situ prepared from the deprotonation of a representative quinazolinonium salt.     

Gas‐Phase Energetics of Reductive Elimination from a Palladium(II) N‐Heterocyclic Carbene Complex

Energy‐resolved collision‐induced dissociation experiments using tandem mass spectrometry are reported for an phenylpalladium N‐heterocyclic carbene (NHC) complex. Reductive elimination of an NHC ligand as a phenylimidazolium ion involves a barrier of 30.9(14) kcal mol^?1, whereas competitive ligand dissociation requires 47.1(17) kcal mol^?1. The resulting three‐coordinate palladium complex readily undergoes reductive C? C coupling to give the phenylimidazolium π complex, for which the binding energy was determined to be 38.9(10) kcal mol^?1. Density functional calculations at the M06‐L//BP86/TZP level of theory are in very good agreement with experiment. In combination with RRKM modeling, these results suggest that the rate‐determining step for the direct reductive elimination process switches from the C? C coupling step to the fragmentation of the resulting σ complex at low activation energy.     

Nitridorhenium(V) Complexes with 1,3,4‐Triphenyl‐1,2,4‐triazol‐5‐ylidene

[ReNCl₂(PPh₃)₂] and [ReNCl₂(PMe₂Ph)₃] react with the N‐heterocyclic carbene (NHC) 1,3,4‐triphenyl‐1,2,4‐triazol‐5‐ylidene (HL^Ph) under formation of the stable rhenium(V) nitrido complex [ReNCl(HL^Ph)(L^Ph)], which contains one of the two NHC ligands with an additional orthometallation. The rhenium atom in the product is five‐coordinate with a distorted square‐pyramidal coordination sphere. The position trans to the nitrido ligand is blocked by one phenyl ring of the monodentate HL^Ph ligand. The Re–C(carbene) bond lengths of 2.072(6) and 2.074(6) Å are comparably long and indicate mainly σ‐bonding between the NHC ligand and the electron deficient d² metal atom. The chloro ligand in [ReNCl(HL^Ph)(L^Ph)] is labile and can be replaced by ligands such as pseudohalides or monoanionic thiolates such as diphenyldithiophosphinate (Ph₂PS₂^?) or pyridine‐2‐thiolate (pyS^?). X‐ray structure analyses of [ReN(CN)(HL^Ph)(L^Ph)] and [ReN(pyS)(HL^Ph)(L^Ph)] show that the bonding situation of the NHC ligands (Re–C(carbene) distances between 2.086(3) and 2.130(3) Å) in the product is not significantly influenced by the ligand exchange. The potentially bidentate pyS^? ligand is solely coordinated via its thiolato functionality. Hydrogen atoms of each one of the phenyl rings come close to the unoccupied sixth coordination positions of the rhenium atoms in the solid state structures of all complexes. Re–H distances between 2.620 and 2.712Å do not allow to discuss bonding, but with respect to the strong trans labilising influence of “N^3?”, weak interactions are indicated.     

Nickel N‐heterocyclic carbene complexes in the vinyl polymerization of norbornene

Vinyl polymerized norbornene has some useful properties such as good mechanical strength, optical transparency and heat resistance. Several transition metal complexes have been described in the literature as active catalysts for the vinyl polymerization of norbornene. We now report the use of three types of nickel(II) complexes with N‐heterocyclic carbene (NHC) ligands in the catalytic vinyl polymerization of norbornene under a range of conditions. Specifically, two nickel complexes bearing a chelating bis(NHC) ligand, two nickel complexes bearing two chelating anionic N‐donor functionalized NHC ligands as well as one diiodidonickel(II) complex with two monodentate NHC ligands were tested. The solid‐state structure of bis(1,3‐dimethylimidazol‐2‐ylidene)diiodidonickel(II), as determined by X‐ray crystallography, is presented. The highest polymerization activity of 2.6 × 10⁷ g (mol cat)^?1 h^?1 was observed using the latter nickel complex as catalyst, activated by methylaluminoxane. The norbornene polymers thus obtained are of high molecular weight but with rather low polydispersity. Copyright © 2010 John Wiley & Sons, Ltd.     

NHC→SiCl4: An Ambivalent Carbene‐Transfer Reagent

The addition of BCl₃ to the carbene‐transfer reagent NHC→SiCl₄ (NHC=1,3‐dimethylimidazolidin‐2‐ylidene) gave the tetra‐ and pentacoordinate trichlorosilicon(IV) cations [(NHC)SiCl₃]⁺ and [(NHC)₂SiCl₃]⁺ with tetrachloroborate as counterion. This is in contrast to previous reactions, in which NHC→SiCl₄ served as a transfer reagent for the NHC ligand. The addition of BF₃ ? OEt₂, on the other hand, gave NHC→BF₃ as the product of NHC transfer. In addition, the highly Lewis acidic bis(pentafluoroethyl)silane (C₂F₅)₂SiCl₂ was treated with NHC→SiCl₄. In acetonitrile, the cationic silicon(IV) complexes [(NHC)SiCl₃]⁺ and [(NHC)₂SiCl₃]⁺ were detected with [(C₂F₅)SiCl₃]^? as counterion. A similar result was already reported for the reaction of NHC→SiCl₄ with (C₂F₅)₂SiH₂, which gave [(NHC)₂SiCl₂H][(C₂F₅)SiCl₃]. If the reaction medium was changed to dichloromethane, the products of carbene transfer, NHC→Si(C₂F₅)₂Cl₂ and NHC→Si(C₂F₅)₂ClH, respectively, were obtained instead. The formation of the latter species is a result of chloride/hydride metathesis. These compounds may serve as valuable precursors for electron‐poor silylenes. Furthermore, the reactivity of NHC→SiCl₄ towards phosphines is discussed. The carbene complex NHC→PCl₃ shows similar reactivity to NHC→SiCl₄, and may even serve as a carbene‐transfer reagent as well.     

Aggregation and Degradation of White Phosphorus Mediated by N‐Heterocyclic Carbene Nickel(0) Complexes

The reaction of zerovalent nickel compounds with white phosphorus (P₄) is a barely explored route to binary nickel phosphide clusters. Here, we show that coordinatively and electronically unsaturated N‐heterocyclic carbene (NHC) nickel(0) complexes afford unusual cluster compounds with P₁, P₃, P₅ and P₈ units. Using [Ni(IMes)₂] [IMes=1,3‐bis(2,4,6‐trimethylphenyl)imidazolin‐2‐ylidene], electron‐deficient Ni₃P₄ and Ni₃P₆ clusters have been isolated, which can be described as superhypercloso and hypercloso clusters according to the Wade–Mingos rules. Use of the bulkier NHC complexes [Ni(IPr)₂] or [(IPr)Ni(η⁶‐toluene)] [IPr=1,3‐bis(2,6‐diisopropylphenyl)imidazolin‐2‐ylidene] affords a closo‐Ni₃P₈ cluster. Inverse‐sandwich complexes [(NHC)₂Ni₂P₅] (NHC=IMes, IPr) with an aromatic cyclo‐P₅^? ligand were identified as additional products.     

Phenylimidorhenium(V) Complexes with 1,3‐Diethyl‐4,5‐dimethylimidazole‐2‐ ylidene Ligands

The phenylimidorhenium(V) complexes [Re(NPh)X₃(PPh₃)₂] (X = Cl, Br) react with the N‐heterocyclic carbene (NHC) 1,3‐diethyl‐4,5‐dimethylimidazole‐2‐ylidene (L^Et) under formation of the stable rhenium(V) complex cations [Re(NPh)X(L^Et)₄]²⁺ (X = Cl, Br), which can be isolated as their chloride or [PF₆]^? salts. The compounds are remarkably stable against air, moisture and ligand exchange. The hydroxo species [Re(NPh)(OH)(L^Et)₄]²⁺ is formed when moist solvents are used during the synthesis. The rhenium atoms in all three complexes are coordinated in a distorted octahedral fashion with the four NHC ligands in equatorial planes of the molecules. The Re–C(carbene) bond lengths between 2.171(8) and 2.221(3) Å indicate mainly σ‐bonding between the NHC ligand and the electron deficient d² metal atoms. Attempts to prepare analogous phenylimido complexes from [Re(NPh)Cl₃(PPh₃)₂] and 1,3‐diisopropyl‐4,5‐dimethylimidazole‐2‐ylidene (L^i?Pr) led to a cleavage of the rhenium‐nitrogen multiple bond and the formation of the dioxo complex [ReO₂(L^i?Pr)₄]⁺.     

Unsymmetrical Pincer‐Type Ruthenium Complex Containing β‐Protic Pyrazole and N‐Heterocyclic Carbene Arms: Comparison of Brønsted Acidity of NH Groups in Second Coordination Sphere

A reaction of a 2‐(imidazol‐1‐yl)methyl‐6‐(pyrazol‐3‐yl)pyridine with [RuCl₂(PPh₃)₃] resulted in tautomerization of the imidazole unit to afford the unsymmetrical pincer‐type ruthenium complex 2 containing a protic pyrazole and N‐heterocyclic carbene (NHC) arms. Deprotonation of 2 with one equivalent of a base led to the formation of the NHC–pyrazolato complex 3 , indicating that the protic NHC arm is less acidic. When 2 was treated with two equivalents of a base under H₂ or in 2‐propanol, the hydrido complex 4 containing protic NHC and pyrazolato groups was obtained through metal–ligand cooperation.     

[(NHC)NiIIH]‐Catalyzed Cross‐Hydroalkenylation of Cyclopropenes with Alkynes: Cyclopentadiene Synthesis by [(NHC)NiII]‐Assisted C−C Rearrangement

A cross‐hydroalkenylation/rearrangement cascade (HARC), using a cyclopropene and alkyne as substrate pairs, was achieved for the first time by using new [(NHC)Ni(allyl)]BAr^F catalysts (NHC=N‐heterocyclic carbenes). By controlling the (NHC)Ni^IIH relative insertion reactivity with cyclopropene and alkyne, a broad scope of cyclopentadienes was obtained with highly selectively. The structural features of the new (NHC)Ni^II catalyst were important for the success of the reaction. The mild reaction conditions employed may serve as an entry for exploring (NHC)Ni^II‐assisted vinylcyclopropane rearrangement reactivity.     

Water‐Soluble Luminescent Cyclometalated Gold(III) Complexes with cis‐Chelating Bis(N‐Heterocyclic Carbene) Ligands: Synthesis and Photophysical Properties

A new class of cyclometalated Au^III complexes containing various bidentate C‐deprotonated C^N and cis‐chelating bis(N‐heterocyclic carbene) (bis‐NHC) ligands has been synthesized and characterized. These are the first examples of Au^III complexes supported by cis‐chelating bis‐NHC ligands. [Au(C^N)(bis‐NHC)] complexes display emission in solutions under degassed condition at room temperature with emission maxima (λ_max) at 498–633 nm and emission quantum yields of up to 10.1 %. The emissions are assigned to triplet intraligand (IL) π→π* transitions of C^N ligands. The Au^III complex containing a C^N (C‐deprotonated naphthalene‐substituted quinoline) ligand with extended π‐conjugation exhibits prompt fluorescence and phosphorescence of comparable intensity with λ_max at 454 and 611 nm respectively. With sulfonate‐functionalized bis‐NHC ligand, four water‐soluble luminescent Au^III complexes, including those displaying both fluorescence and phosphorescence, were prepared. They show similar photophysical properties in water when compared with their counterparts in acetonitrile. The long phosphorescence lifetime of the water‐soluble AuIII complex with C‐deprotonated naphthalene‐substituted quinoline ligand renders it to function as ratiometric sensor for oxygen. Inhibitory activity of one of these water‐soluble Au^III complexes towards deubiquitinase (DUB) UCHL3 has been investigated; this complex also displayed a significant inhibitory activity with IC₅₀ value of 0.15 μM .     

A Bis(Diphosphanyl N‐Heterocyclic Carbene) Gold Complex: A Synthon for Luminescent Rigid AuAg2 Arrays and Au5 and Cu6 Double Arrays

A mononuclear bis(NHC)/Au^I (NHC=N‐heterocyclic carbene) cationic complex with a rigid bis(phosphane)‐functionalized NHC ligand (PC_NHCP) was used to construct linear Au₃ and Ag₂Au arrays, a Au₅ cluster with two intersecting crosslike Au₃ arrays, and an unprecedented Cu₆ complex with two parallel Cu₃ arrays. The impact of metallophilic interactions on photoluminescence was studied experimentally.     

Copper and Silver Carbene Complexes without Heteroatom‐Stabilization: Structure,Spectroscopy, and Relativistic Effects

Salts of a copper and a silver carbene complex were prepared from dimesityl diazomethane, made possible by the steric shielding of the N‐heterocyclic carbene (NHC) ancillary ligand IPr**. The mint‐green complex [IPr**Ag=CMes₂]⁺[NTf₂]^? is the first isolated silver carbene complex without heteroatom donor substituents. Single‐crystal X‐ray diffraction provides evidence for a predominant carbenoid character, and supports the postulation of such reactive species as intermediates in silver‐catalyzed C? H activation reactions. The greenish yellow copper carbene complex [IPr**Cu=CMes₂]⁺[NTf₂]^? has spectroscopic properties in between the isostructural silver complex and the already reported emerald green gold carbene complex. A comparison in the Group 11 series indicates that relativistic effects are responsible for the strong σ bond and the significant π back‐bonding in the gold carbene moiety.     

Multifunctional AuI‐based AIEgens: Manipulating Molecular Structures and Boosting Specific Cancer Cell Imaging and Theranostics

Gold(I) N‐heterocyclic carbene (Au^I‐NHC) complexes have emerged as potential anticancer agents owing to their high cytotoxicity and stability. Integration of their above unique functions with customized aggregation‐induced emission (AIE) luminogens to achieve specific bioimaging and efficient theranostics to cancer is highly desirable but is rarely studied. Now, a series of novel Au^I‐NHC compounds were developed with AIE characteristics. A complex with a PPh₃ ligand was selected out as it could achieve both prominent specific imaging of various cancer cells and efficient inhibition of their growth with negligible toxic effects on normal cells due to the targeting binding and strong inhibition towards thioredoxin reductase. This complex could also act as a powerful radiosensitizer to boost the anticancer efficacy with performance superior to that of popularly used auranofin. It holds great potential as a specific and effective theranostic drug in cancer diagnosis and precise therapy.