Water‐Soluble Luminescent Cyclometalated Gold(III) Complexes with cis‐Chelating Bis(N‐Heterocyclic Carbene) Ligands: Synthesis and Photophysical Properties

A new class of cyclometalated Au^III complexes containing various bidentate C‐deprotonated C^N and cis‐chelating bis(N‐heterocyclic carbene) (bis‐NHC) ligands has been synthesized and characterized. These are the first examples of Au^III complexes supported by cis‐chelating bis‐NHC ligands. [Au(C^N)(bis‐NHC)] complexes display emission in solutions under degassed condition at room temperature with emission maxima (λ_max) at 498–633 nm and emission quantum yields of up to 10.1 %. The emissions are assigned to triplet intraligand (IL) π→π* transitions of C^N ligands. The Au^III complex containing a C^N (C‐deprotonated naphthalene‐substituted quinoline) ligand with extended π‐conjugation exhibits prompt fluorescence and phosphorescence of comparable intensity with λ_max at 454 and 611 nm respectively. With sulfonate‐functionalized bis‐NHC ligand, four water‐soluble luminescent Au^III complexes, including those displaying both fluorescence and phosphorescence, were prepared. They show similar photophysical properties in water when compared with their counterparts in acetonitrile. The long phosphorescence lifetime of the water‐soluble AuIII complex with C‐deprotonated naphthalene‐substituted quinoline ligand renders it to function as ratiometric sensor for oxygen. Inhibitory activity of one of these water‐soluble Au^III complexes towards deubiquitinase (DUB) UCHL3 has been investigated; this complex also displayed a significant inhibitory activity with IC₅₀ value of 0.15 μM .     

The first example of a two‐coordinated AuI atom bonded to an FeII atom and an N‐heterocyclic carbene (NHC) ligand

The aurophilicity exhibited by Au^I complexes depends strongly on the nature of the supporting ligands present and the length of the Au–element (Au—E) bond may be used as a measure of the donor–acceptor properties of the coordinated ligands. A binuclear iron–gold complex, [1,3‐bis(2,6‐diisopropylphenyl)imidazol‐2‐ylidene‐2κC²]dicarbonyl‐1κ²C‐(1η⁵‐cyclopentadienyl)gold(I)iron(II)(Au—Fe) benzene trisolvate, [AuFe(C₅H₅)(C₂₇H₃₆N₂)(CO)₂]·3C₆H₆, was prepared by reaction of K[CpFe(CO)₂] (Cp is cyclopentadienyl) with (NHC)AuCl [NHC = 1,3‐bis(2,6‐diisopropylphenyl)imidazol‐2‐ylidene]. In addition to the binuclear complex, the asymmetric unit contains three benzene solvent molecules. This is the first example of a two‐coordinated Au atom bonded to an Fe and a C atom of an N‐heterocyclic carbene.     

Structure and spectroscopic properties of the dimeric copper(I) N‐heterocyclic carbene complex [Cu2(CNCt‐Bu)2](PF6)2

In recent years, the use of copper N‐heterocyclic carbene (NHC) complexes has expanded to fields besides catalysis, namely medicinal chemistry and luminescence applications. In the latter case, multinuclear copper NHC compounds have attracted interest, however, the number of these complexes in the literature is still quite limited. Bis[μ‐1,3‐bis(3‐tert‐butylimidazolin‐2‐yliden‐1‐yl)pyridine]‐1κ⁴C²,N:N,C^2′;2κ⁴C²,N:N,C^2′‐dicopper(I) bis(hexafluoridophosphate), [Cu₂(C₁₉H₂₅N₅)₂](PF₆)₂, is a dimeric copper(I) complex bridged by two CNC, i.e. bis(N‐heterocyclic carbene)pyridine, ligands. Each Cu^I atom is almost linearly coordinated by two NHC ligands and interactions are observed between the pyridine N atoms and the metal centres, while no cuprophilic interactions were observed. Very strong absorption bands are evident in the UV–Vis spectrum at 236 and 274 nm, and an emission band is observed at 450 nm. The reported complex is a new example of a multinuclear copper NHC complex and a member of a compound class which has only rarely been reported.     

Template Synthesis,Metalation, and Self‐Assembly of Protic Gold(I)/(NHC)2 Tectons Driven by Metallophilic Interactions

A new protocol for the synthesis of protic bis(N‐heterocyclic carbene) complexes of Au^I by a stepwise metal‐controlled coupling of isocyanide and propargylamine is described. They are used as tectons for the construction of supramolecular architectures through metalation and self‐assembly. Notably a unique polymeric chain of Cu^I with alternate Au^I/bis(imidazolate) bridging scaffolds and strong unsupported Cu^I–Cu^I interactions has been generated, as well as a 28‐metal‐atoms cluster containing a nanopiece of Cu₂O trapped by peripheral Au^I/bis(imidazolate) moieties.     

Template Synthesis,Metalation, and Self‐Assembly of Protic Gold(I)/(NHC)2 Tectons Driven by Metallophilic Interactions

A new protocol for the synthesis of protic bis(N‐heterocyclic carbene) complexes of Au^I by a stepwise metal‐controlled coupling of isocyanide and propargylamine is described. They are used as tectons for the construction of supramolecular architectures through metalation and self‐assembly. Notably a unique polymeric chain of Cu^I with alternate Au^I/bis(imidazolate) bridging scaffolds and strong unsupported Cu^I–Cu^I interactions has been generated, as well as a 28‐metal‐atoms cluster containing a nanopiece of Cu₂O trapped by peripheral Au^I/bis(imidazolate) moieties.     

Reversible Photochemical Modifications in Dicarbene‐Derived Metallacycles with Coumarin Pendants

Molecular rectangles were obtained from two bis(NHC) ligands, each featuring two terminal coumarin groups and two Ag⁺, Au⁺, or Cu⁺ ions. Upon UV irradiation (λ=365 nm), the dinuclear complexes undergo photochemical modification through a [2+2] cycloaddition reaction of two adjacent coumarin moieties to give a macrocyclic tetra(NHC) ligand. The photodimerization of the coumarin pendants proceeds stereoselectively to give the syn‐head‐head isomers in all cases. Subsequent irradiation at λ=254 nm initiates a photocleavage reaction with reconstitution of the initial dinuclear complexes with coumarin pendants.     

Controlling Metallophilic Interactions in Chiral Gold(I) Double Salts towards Excitation Wavelength‐Tunable Circularly Polarized Luminescence

Materials exhibiting excitation wavelength‐dependent photoluminescence (Ex‐De PL) in the visible region have potential applications in bioimaging, optoelectronics and anti‐counterfeiting. Two multifunctional, chiral [Au(NHC)₂][Au(CN)₂] (NHC=(4R,5R)/(4S,5S)‐1,3‐dimethyl‐4,5‐diphenyl‐4,5‐dihydro‐imidazolin‐2‐ylidene) complex double salts display Ex‐De circularly polarized luminescence (CPL) in doped polymer films and in ground powder. Emission maxima can be dynamically tuned from 440 to 530 nm by changing the excitation wavelength. The continuously tunable photoluminescence is proposed to originate from multiple emissive excited states as a result of the existence of varied Au^I???Au^I distances in ground state. The steric properties of the NHC ligand are crucial to the tuning of Au^I???Au^I distances. An anti‐counterfeiting application using these two salts is demonstrated.     

Ring‐to‐Cage Structural Conversion via Template Effect in a Gold(I) Metallosupramolecular System

A unique example of a ring‐to‐cage structural conversion in a multinuclear gold(I) coordination system with d ‐penicillamine (d ‐H₂pen) is reported. The reaction of [Au₂Cl₂(dppe)] (dppe=1,2‐bis(diphenylphosphino)ethane) with d ‐H₂pen in a 1:1 ratio gave [Au₄(dppe)₂(d ‐pen)₂] ([ 1 ]), in which two [Au₂(dppe)]²⁺ units are linked by two d ‐pen S atoms in a cyclic form so as to have two bidentate‐N,O coordination arms. The subsequent reaction of [ 1 ] with Cu(OTf)₂ afforded [Au₄Cu(dppe)₂(d ‐pen)₂]²⁺ ([ 2 ]²⁺), in which a Cu^II ion is chelated by the two coordination arms in [ 1 ] to form an Au^I₄Cu^II bicyclic metallocage. A similar reaction using Cu(NO₃)₂ was accompanied by the ring expansion of [ 1 ] to [Au₈(dppe)₄(d ‐pen)₄], leading to the production of [Au₈Cu₂(dppe)₄(d ‐pen)₄]⁴⁺ ([ 3 ]⁴⁺). In [ 3 ]⁴⁺, two Cu^II ions are each chelated by the two coordination arms to form an Au^I₈Cu^II₂ tricyclic metallocage, accommodating a nitrate ion. The use of Ni(NO₃)₂ or Ni(OAc)₂ instead of Cu(NO₃)₂ commonly gave a tricyclic metallocage of [Au₈Ni₂(dppe)₄(d ‐pen)₄]⁴⁺ ([ 4 ]⁴⁺), but a water molecule was accommodated inside the Au^I₈Ni^II₂ metallocage.     

An Isolable Silicon Dicarbonate Complex from Carbon Dioxide Activation with a Silylone

The first isolable molecular silicon dicarbonate complex (bis‐NHC)Si(CO₃)₂ 2 (bis‐NHC=H₂C[{NC(H)=C(H)N(Dipp)}C:]₂, Dipp=2,6‐iPr₂C₆H₃) was synthesized by facile reaction of the bis‐N‐heterocyclic carbene stabilized silylone (bis‐NHC)Si 1 , bearing a zero‐valent silicon atom, with carbon dioxide. The monomeric silicon dioxide complex (bis‐NHC)SiO₂ 3 supported by the bis‐NHC ligand was proposed as a key intermediate resulting from double oxygenation of the zero‐valent silicon atom in 1 by two molar equivalents of CO₂ under liberation of CO; its subsequent Lewis acid–base reaction with CO₂ leads to 2 which has been fully characterized including an single‐crystal X‐ray diffraction analysis. Its electronic structure, spectroscopic data and the thermochemistry of the formation have been studied quantum‐chemically.     

A Stable Antiaromatic 5,20‐Dibenzoyl [28]Hexaphyrin(1.1.1.1.1.1): Core AuIII Metalation and Subsequent Peripheral BIII Metalation

5,20‐Dibenzoyl [28]hexaphyrin(1.1.1.1.1.1) was synthesized as the first hexaphyrin bearing meso‐aroyl substituents. The meso‐dibenzoyl substituents are hydrogen‐bonded with the pyrrolic protons to stabilize an antiaromatic dumbbell conformer. Core metalation of this hexaphyrin with Au^III afforded rectangular and aromatic [26]hexaphyrin bis‐Au^III complexes, the major isomer of which was reduced with NaBH₄ to give its antiaromatic 28π bis‐Au^III complex. This complex allowed facile peripheral metalation with B^III owing to the peripheral benzoyl substituents.     

From Silylone to an Isolable Monomeric Silicon Disulfide Complex

The synthesis and characterization of the first bis‐N‐heterocyclic carbene stabilized monomeric silicon disulfide (bis‐NHC)SiS₂ 2 (bis‐NHC=H₂C[{NC(H)C(H)N(Dipp)}C:]₂, Dipp=2,6‐iPr₂C₆H₃) is reported. Compound 2 is prepared in 89 % yield from the reaction of the zero‐valent silicon complex (′silylone′) 1 [(bis‐NHC)Si] with elemental sulfur. Compound 2 can react with GaCl₃ in acetonitrile to give the corresponding (bis‐NHC)Si(S)S→GaCl₃ Lewis acid–base adduct 3 in 91 % yield. Compound 3 is also accessible through the reaction of the unprecedented silylone‐GaCl₃ adduct [(bis‐NHC)Si→GaCl₃] 4 with elemental sulfur. Compounds 2 , 3 , and 4 could be isolated and characterized by elemental analyses, HR‐MS, IR, ¹³C‐ and ²⁹Si‐NMR spectroscopy. The structures of 3 and 4 could be determined by single‐crystal X‐ray diffraction analyses. DFT‐derived bonding analyses of 2 and 3 exhibited highly polar Si S bonds with moderate p_π–p_π bonding character.     

Multifunctional AuI‐based AIEgens: Manipulating Molecular Structures and Boosting Specific Cancer Cell Imaging and Theranostics

Gold(I) N‐heterocyclic carbene (Au^I‐NHC) complexes have emerged as potential anticancer agents owing to their high cytotoxicity and stability. Integration of their above unique functions with customized aggregation‐induced emission (AIE) luminogens to achieve specific bioimaging and efficient theranostics to cancer is highly desirable but is rarely studied. Now, a series of novel Au^I‐NHC compounds were developed with AIE characteristics. A complex with a PPh₃ ligand was selected out as it could achieve both prominent specific imaging of various cancer cells and efficient inhibition of their growth with negligible toxic effects on normal cells due to the targeting binding and strong inhibition towards thioredoxin reductase. This complex could also act as a powerful radiosensitizer to boost the anticancer efficacy with performance superior to that of popularly used auranofin. It holds great potential as a specific and effective theranostic drug in cancer diagnosis and precise therapy.     

NHC‐Coordinated Diphosphene‐Stabilized Gold(I) Hydride and Its Reversible Conversion to Gold(I) Formate with CO2

An NHC‐coordinated diphosphene is employed as ligand for the synthesis of a hydrocarbon‐soluble monomeric Au^I hydride, which readily adds CO₂ at room temperature yielding the corresponding Au^I formate. The reversible reaction can be expedited by the addition of NHC, which induces β‐hydride shift and the removal of CO₂ from equilibrium through the formation of an NHC‐CO₂ adduct. The Au^I formate is alternatively formed by dehydrogenative coupling of the Au^I hydride with formic acid (HCO₂H), thus in total establishing a reaction sequence for the Au^I hydride mediated dehydrogenation of HCO₂H as chemical hydrogen storage material.     

124I Radiolabeling of a AuIII‐NHC Complex for In Vivo Biodistribution Studies

Au^III complexes with N‐heterocyclic carbene (NHC) ligands have shown remarkable potential as anticancer agents, yet their fate in vivo has not been thoroughly examined and understood. Reported herein is the synthesis of new Au^III‐NHC complexes by direct oxidation with radioactive [¹²⁴I]I₂ as a valuable strategy to monitor the in vivo biodistribution of this class of compounds using positron emission tomography (PET). While in vitro analyses provide direct evidence for the importance of Au^III‐to‐Au^I reduction to achieve full anticancer activity, in vivo studies reveal that a fraction of the Au^III‐NHC prodrug is not immediately reduced after administration but able to reach the major organs before metabolic activation.     

A Tray‐Shaped,PdII‐Clipped Au3 Complex as a Scaffold for the Modular Assembly of [3×n] Au Ion Clusters

A tray‐shaped Pd^II₃Au^I₃ complex ( 1 ) is prepared from 3,5‐bis(3‐pyridyl)pyrazole by means of tricyclization with Au^I followed by Pd^II clipping. Tray 1 is an efficient scaffold for the modular assembly of [3×n] Au^I clusters. Treatment of 1 with the Au^I₃ tricyclic guest 2 in H₂O/CH₃CN (7:3) or H₂O results in the selective formation of a [3×2] cluster ( 1 ? 2 ) or a [3×3] cluster ( 1 ? 2 ? 1 ), respectively. Upon subsequent addition of Ag^I ions, these complexes are converted to an unprecedented Au₃–Au₃–Ag–Au₃–Au₃ metal ion cluster.     

π‐Ruthenium Complexes of Hexaphyrins(1.1.1.1.1.1): A Triple‐Decker Complex Bearing Two Ruthenoarene Units

Ruthenium(II) π‐coordination onto [28]hexaphyrins(1.1.1.1.1.1) has been accomplished. Reactions of bis‐Au^III and mono‐Au^III complexes of hexakis(pentafluorophenyl) [28]hexaphyrin with [RuCl₂(p‐cymene)]₂ in the presence of NaOAc gave the corresponding π‐ruthenium complexes, in which the [(p‐cymene)Ru]^II fragment sat on the deprotonated side pyrrole. A similar reaction of the bis‐Pd^II [26]hexaphyrin complex afforded a triple‐decker complex, in which the two [(p‐cymene)Ru]^II fragments sat on both sides of the center of the [26]hexaphyrin framework.     

Amine‐Responsive Disassembly of AuI–CuI Double Salts for Oxidative Carbonylation

A sensitive amine‐responsive disassembly of self‐assembled Au^I‐Cu^I double salts was observed and its utilization for the synergistic catalysis was enlightened. Investigation of the disassembly of [Au(NHC)₂][CuI₂] revealed the contribution of Cu‐assisted ligand exchange of N‐heterocyclic carbene (NHC) by amine in [Au(NHC)₂]⁺ and the capacity of [CuI₂]^? on the oxidative step. By integrating the implicative information coded in the responsive behavior and inherent catalytic functions of d¹⁰ metal complexes, a catalyst for the oxidative carbonylation of amines was developed. The advantages of this method were clearly reflected on mild reaction conditions and the significantly expanded scope (51 examples); both primary and steric secondary amines can be employed as substrates. The cooperative reactivity from Au and Cu centers, as an indispensable prerequisite for the excellent catalytic performance, was validated in the synthesis of (un)symmetric ureas and carbamates.     

A Tray‐Shaped,PdII‐Clipped Au3 Complex as a Scaffold for the Modular Assembly of [3×n] Au Ion Clusters

A tray‐shaped Pd^II₃Au^I₃ complex ( 1 ) is prepared from 3,5‐bis(3‐pyridyl)pyrazole by means of tricyclization with Au^I followed by Pd^II clipping. Tray 1 is an efficient scaffold for the modular assembly of [3×n] Au^I clusters. Treatment of 1 with the Au^I₃ tricyclic guest 2 in H₂O/CH₃CN (7:3) or H₂O results in the selective formation of a [3×2] cluster ( 1 ⋅ 2 ) or a [3×3] cluster ( 1 ⋅ 2 ⋅ 1 ), respectively. Upon subsequent addition of Ag^I ions, these complexes are converted to an unprecedented Au₃–Au₃–Ag–Au₃–Au₃ metal ion cluster.     

Silylene–Nickel Promoted Cleavage of B−O Bonds: From Catechol Borane to the Hydroborylene Ligand

The first 16 valence electron [bis(NHC)](silylene)Ni⁰ complex 1 , [(^TMSL)ClSi:→Ni(NHC)₂], bearing the acyclic amido‐chlorosilylene (^TMSL)ClSi: (^TMSL=N(SiMe₃)Dipp; Dipp=2,6‐Prⁱ₂C₆H₄) and two NHC ligands (N‐heterocyclic carbene=:C[(Prⁱ)NC(Me)]₂) was synthesized in high yield and structurally characterized. Compound 1 is capable of facile dihydrogen activation under ambient conditions to give the corresponding HSi‐NiH complex 2 . Most notably, 1 reacts with catechol borane to afford the unprecedented hydroborylene‐coordinated (chloro)(silyl)nickel(II) complex 3 , {[cat(^TMSL)Si](Cl)Ni←:BH(NHC)₂}, via the cleavage of two B−O bonds and simultaneous formation of two Si−O bonds. The mechanism for the formation of 3 was rationalized by means of DFT calculations, which highlight the powerful synergistic effects of the Si:→Ni moiety in the breaking of incredibly strong B−O bonds.     

A new stepped tetranuclear copper(II) complex: synthesis,crystal structure and photoluminescence properties

Binuclear and tetranuclear copper(II) complexes are of interest because of their structural, magnetic and photoluminescence properties. Of the several important configurations of tetranuclear copper(II) complexes, there are limited reports on the crystal structures and solid‐state photoluminescence properties of `stepped' tetranuclear copper(II) complexes. A new Cu^II complex, namely bis{μ₃‐3‐[(4‐methoxy‐2‐oxidobenzylidene)amino]propanolato}bis{μ₂‐3‐[(4‐methoxy‐2‐oxidobenzylidene)amino]propanolato}tetracopper(II), [Cu₄(C₁₁H₁₃NO₃)₄], has been synthesized and characterized using elemental analysis, FT–IR, solid‐state UV–Vis spectroscopy and single‐crystal X‐ray diffraction. The crystal structure determination shows that the complex is a stepped tetranuclear structure consisting of two dinuclear [Cu₂(L )₂] units {L is 3‐[(4‐methoxy‐2‐oxidobenzylidene)amino]propanolate}. The two terminal Cu^II atoms are four‐coordinated in square‐planar environments, while the two central Cu^II atoms are five‐coordinated in square‐pyramidal environments. The solid‐state photoluminescence properties of both the complex and 3‐[(2‐hydroxy‐4‐methoxybenzylidene)amino]propanol (H₂L ) have been investigated at room temperature in the visible region. When the complex and H₂L are excited under UV light at 349 nm, the complex displays a strong blue emission at 469 nm and H₂L displays a green emission at 515 nm.