新型P-/n-掺杂型共轭低聚物的合成及其光学和电化学性能研究

通过Heck偶联法制备了一种新型P-/n-掺杂型电致发光材料--3-十二烷氧基噻吩一共-1,3,4-二唑共轭低聚物(P3DDOTV-OXD),用核磁共振氢谱(~1H NMR)及凝胶色谱(GPC)对其结构进行了分析表征.用紫外一可见光谱法(UV-Vis)、荧光光谱法及电化学分析法对其光学和电化学性能进行了研究.结果表明:P3DDOTV-OXD的蕈均分子量为:5287(四氢呋喃为流动相,聚苯乙烯为标准样品).在氯仿溶液中,P3DDOTV-OXD的紫外最大吸收波长为314 nm.在401 am处发射出明亮的蓝光;其最人发射波长较规整均聚物(HT P3DDOT)λ_(max)=516 nm)蓝移了115 nm.循环伏安测定结果表明:P3DDOTV-OXD在正、负向区域分别出现了氧化还原峰,电子亲和能(I_a)为2.88 eV,有利于电子从阴极的注入.3-十二烷氧基噻吩一共一嗯二唑共轭低聚物有望成为集空穴、电子双向传输为一体的新型光电功能材料.     

新型p-/n-交替3-烷基噻吩共聚物的合成及其光电性质的研究

通过Heck偶合法合成了四种新型p-/n-交替3-烷基噻吩共聚物：聚(2,4-二乙烯基-3-己基噻吩-1,3,4-噁二唑) (P3HT-OXD)、聚(2,4-二乙烯基-3-辛基噻吩-1,3,4-噁二唑) (P3OT-OXD)、聚(2,4-二乙烯基-3-己基噻吩-吡啶) (P3HT-Py)、聚(2,4-二乙烯基-3-辛基噻吩-吡啶) (P3OT-Py)。利用NMR、GPC等方法对结构进行了分析表征。采用循环伏安法、紫外－可见吸收光谱法对该系列共聚物的光电性能进行了研究,结果表明：随着噻吩环3位取代烷基碳链的增长,聚合物电离能（Ip）减小,带隙能（Eg）也随之变窄,其中,P3OT-OXD的Eg比P3HT-OXD小0.11ev,P3OT-Py的Eg比P3HT-Py小0.19eV;而在3-烷基噻吩聚合物主链上引入吸电子能力较强的噁二唑单元,可有效提高共聚物电子亲合能（Ea）,对提高电子传输能力,改善电子与空穴注入平衡有积极作用     

3-烷基噻吩交替共聚物的合成及其电化学性质

通过Heck偶联法合成了4种3-烷基噻吩交替共聚物:聚(2,4-二乙烯基-3-己基噻吩-1,3,4-二唑)(P3HT-OXD)、聚(2,4-二乙烯基-3-辛基噻吩-1,3,4-二唑)(P3OT-OXD)、聚(2,4-二乙烯基-3-己基噻吩-吡啶)(P3HT-Py)和聚(2,4-二乙烯基-3-辛基噻吩-吡啶)(P3OT-Py). 用NMR、GPC等测试技术对其结构进行了表征. 采用循环伏安法、紫外-可见吸收光谱法研究了系列共聚物光电性能. 结果表明,随噻吩环3位取代烷基碳链的增长,聚合物电离能(Ip)减小,带隙(Eg)也随之变窄. 其中,P3OT-OXD的Eg比P3HT-OXD小0.11 eV,P3OT-Py的Eg比P3HT-Py小0.19 eV,在3-烷基噻吩聚合物主链上引入吸电子能力较强的二唑单元,可有效提高共聚物电子亲合能(Ea),对提高电子传输能力,改善电子与空穴注入平衡有积极作用.     

烷基和烷氧基取代聚噻吩的合成、表征与光电性能

Fe(Ⅲ )氧化催化法合成了 4种聚噻吩衍生物 ,3 十二烷基聚噻吩 (Pat12 ) ,3 辛氧基聚噻吩 (Paot8) ,3,4 二 (十二烷基 )聚噻吩 (Pat12 12 )和 3 (十二烷基 )噻吩 3 (辛氧基 )噻吩共聚物 (CoPt12 o8) .发现这些衍生物易溶于多种常用有机溶剂 .用GPC法测定了各聚合物分子量 ,用1 H NMR法表征了各聚合物化学结构 .对比研究了这些聚合物紫外 可见吸收性能 ,光致发光性能和能隙 .对其电致发光性能进行测定的结果 ,得到了Pat12 ,Pat12 12和Paot8的电致发光光谱 .发射峰分别为 6 70nm ,5 6 0nm和 6 4 0nm .发光颜色分别为红色 ,黄色和红橙色 .聚合物的光电性能与主链电子结构有密切关系 .探讨了取代基种类和数量对聚合物能带结构 ,光电性能的影响 .     

基于1,2,4-三氮唑衍生物的共轭聚合物的合成及其光伏性能

以缺电子的1,2,4-三氮唑衍生物作为拉电子结构单元(A), 以富电子的噻吩或苯并二噻吩衍生物作为推电子结构单元(D), 通过Stille偶联聚合的方法, 合成了三种主链型D-A(推-拉电子结构)的交替共聚物PT-TZ, PB-TZ和PB-TTZT. 不同富电子结构单元可使其聚合物表现出不同的光物理性能和光伏性能. 嵌入较多的噻吩单元, 可有效增大聚合物主链的共轭长度, 拓宽其吸收光谱, 因此, 聚合物PB-TTZT的光伏性能明显优于另外两种聚合物. 以三种聚合物分别作为给体材料, 以PC₆₁BM作为受体材料, 制备了聚合物太阳能电池(PSCs), 其中, 基于PB-TTZT的PSCs器件在AM 1.5 G模拟太阳光条件下的光电转换效率为1.18%.     

含苯并三氮唑单元的聚对苯撑乙炔类聚合物的合成及性能

利用Pd（Ⅱ）配合物为催化剂,使用4,7-二溴-2-十二烷基-1,2,3-苯并三氮唑和1,4-二乙炔基-2,5-二（烷氧基）苯通过Sonogashira反应合成了3个带有不同长度烷氧基侧链,主链中含有1,2,3-苯并三氮唑单元的聚苯乙炔类聚合物。采用FT-IR、1H-NMR对其化学结构进行了表征。结果表明：这类聚合物的数均分子量在0.93×104～1.13×104,苯并三氮唑单元上长链烷基和苯环上长链烷氧基的存在使此类聚合物在CHCl3、THF等溶液中的溶解度较大,其固态薄膜也较容易制备,聚合物在固态薄膜状态下的紫外-可见最大吸收波长比在CHCl3溶液中红移了约45 nm,在固态薄膜状态下的荧光发射峰比在CHCl3溶液中也发生了较大的红移。     

用于电子传输材料的含噻吩环噁二唑衍生物的合成(英文)

在有机电致发光器件研究中,电子传输材料占有特殊重要的地位。但现存的材料存在着不同的缺点。因噁二唑环的高的电子亲和性,噁二唑衍生物是常见的电子传输材料,如:2-(4- 叔丁苯基)-5-联苯基噁二唑(PBD),但容易结晶和低的电子亲和性限制了它的应用。为了得到新的有效的电子传输材料,本文以噻吩为起始反应物经过二碘代、羧酸化、酯化、氨解等步骤合成了噻吩二酰肼,再通过噻吩二酰肼与相应的取代苯甲酰氯缩合、关环的方法将富电子的噻吩环和高电子亲和性的噻吩环同时引入,合成了三种新的含噻吩环噁二唑衍生物2,5-双[2,2’-双(5-取代苯基)-1,3,4-噁二唑]噻吩(R-OXD R=H,OCH_3,CH_3)。同时,采用循环伏安法对其电化学性能进行了测定。这三种化合物都在负方向出现了-对可逆的氧化还原峰,由此得到其电子亲和势(EA)分别为-3.10eV,-3.07eV和-3.08eV,其EA值都高于常用的电子传输材料PBD。R-OXD的高电子亲和势有利于电子从阴极注入。并且由时间渡越法(TOF)测得R-OXD的电子迁移率达到10~(-4)cm~2/V.S(E=10~6V/cm)。所以R-OXD有可能是好的电子传输材料。     

综合研究DPE添加剂对含5,6-二氟-苯并[1,2,5]噻二唑给-受体共聚物的光伏性能影响

合成了三个以5,6-二氟-苯并[1,2,5]噻二唑为受体,2,5-双-（2-辛基-十二烷氧基）-1,4-双（噻吩并[3,2-b]噻吩基）苯和2,5-双-（2-辛基-十二烷氧基）-1,4-双（硒吩基）苯为给体的给-受体型共聚物（PBT2F-TT-a,PBT2F-TT和PBT2F-Se）.这三个聚合物与PC₇₁BM共混制备成了本体异质结聚合物太阳能电池.通过原子力显微镜（AFM）、透射电子显微镜（TEM）、交流阻抗谱（ACIS）、空间电荷限制电流（SCLC）和短路电流密度-入射光光强（J_SC-P_light）测试方法系统研究了二苯醚（DPE）对活性层的形貌、载流子迁移率以及光伏性能的影响.实验结果表明DPE有助于提高共混膜载流子的迁移率,同时器件的光伏性能也得到改善.此外,PBT2F-Se器件的SCLC实验数据揭示了平衡的空穴和电子迁移率有利于提高器件的短路电流密度.     

一维取代聚噻吩的电子性能

报道了3种取代聚噻吩,3-己基聚噻吩(P3HT)、3,4-二戊基聚噻吩(P34PT)、3-辛氧基聚噻吩(P3OOT)的合成方法1、H-NMR测试结果及UV-Vis吸收光谱和荧光光谱分析结果。用密度泛函方法计算了无取代噻吩、3-乙基噻吩、3,4-二乙基噻吩、3-乙氧基噻吩二聚体的电子性能。随聚合度的提高,聚合物能隙变窄。无取代噻吩二聚体的能隙为4.216 eV,重复单元长度为0.392 7 nm;乙基取代噻吩二聚体的能隙为4.733 eV,重复单元长度为0.393 9 nm;乙氧基取代噻吩二聚体的能隙为3.890 eV,重复单元长度为0.390 8 nm;双乙基取代噻吩二聚体的能隙为5.168 eV,重复单元长度为0.392 5 nm。理论变化规律与实验结果基本一致。     

基于5-芳基-2-巯基噁二唑辅助配体的双核环金属铂配合物的合成及高效电致红光发光器件

设计合成了一种新型的基于5-芳基-2-巯基噁二唑辅助配体的双核环金属铂配合物（dfppy）2Pt2（C8OXT）2,其中dfppy为2-（4,6-二氟苯基）吡啶,C8OXT为5-苯基-2-巯基-1,3,4-噁二唑桥连配体.系统研究了该双核铂配合物（dfppy）2Pt2（C8OXT）2的热稳定性、光物理、电化学及电致发光性能.以（dfppy）2Pt2（C8OXT）2作为客体掺杂到聚合物主体材料中制备了单发光层聚合物电致发光器件.器件展现了饱和的红光发射,其最大发射峰为620nm.当配合物掺杂浓度为8wt%时,器件性能达到最好.其最高外量子效率为8.4%,最高电流效率为4.2cd/A,最大亮度为3228cd/m2.本研究表明,以5-苯基-2-巯基-1,3,4-噁二唑作为桥连配体的双核铂配合物在聚合物器件中能够实现高效红光发射.     

Light-emitting conjugated molecule containing 1,3,4-oxadiazole, carbazole and naphthalene units

A novel pi-conjugated small molecule VNCO, 2,5-bis{3'-[3'-vinyl-9'-(alpha-naphthyl)carbazolyl]phenyl}-1,3,4-oxadiazole, containing hole-transporting carbazole moieties, electron-injecting 1,3,4-oxadiazole moieties and chromophore naphthalene was designed and synthesized by Wittig reaction of 2,5-bis(3-tolylene-triphenylphosphonium bromide)-1,3,4-oxadiazole and 3-formyl-9-(alpha-naphthyl)carbazole. The UV-vis absorption, fluorescence excitation and emission spectra have been obtained in solution for VNCO. The photoluminescence (PL) of VNCO were examined in different solvents and the luminescence quantum yield was 0.746 in chloroform. It emitted blue and blue-green light, with the band gap of 3.30 eV estimated from the onset absorption. In addition, the light-emitting can be quenched by both electron donor (N,N-dimethylaniline) and electron acceptor (dimethylterephalate). Furthermore, the molecular interactions of VNCO with fullerene (C60) or carbon nanotubes (CNTs) were also carefully investigated.     

New poly(p‐phenylene vinylene) derivatives with two oxadiazole rings per repeat unit: Synthesis,photophysical properties,electroluminescence, and metal ion recognition

Two new poly(p‐phenylene vinylene) derivatives OX1‐PPV and OX2‐PPV bearing two 1,3,4‐oxadiazole rings per repeat unit and a fully conjugated backbone with solubilizing dodecyloxy side groups were synthesized and investigated. The amorphous conjugated polymers had glass‐transition temperature values of 60–75 °C and emitted intense blue or greenish‐blue light in solution with photoluminescence (PL) emission maxima at 379–492 nm and PL quantum yields of 0.41–0.52. In the solid state they emitted yellowish‐green light with PL emission maxima at 533–555 nm. Cyclic voltammetry showed that both conjugated polymers had reversible reduction and irreversible oxidation, making them n‐type materials. The electron affinity of OX2‐PPV was estimated as 2.85 eV whereas that of OX1‐PPV was 2.75 eV. Yellow electroluminescence (EL) was achieved from single‐layer light‐emitting diodes of OX2‐PPV with an EL emission maximum at 555 nm and a brightness of 70 cd/m². Polymer OX2‐PPV, which was functionalized with 2,6‐bis(1,3,4‐oxadiazole‐2‐yl)pyridine, demonstrated sensitivity to various metal ions as a fluorescence‐mode chemosensor. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2112–2123, 2004     

基于3,4-二烷氧基噻吩的D-A-D型有机共轭分子的合成及其光学和电化学性能

基于Wittig反应合成了新型D-A-D型有机半导体材料——双(2-乙烯基-3,4-二烷氧基噻吩)-对-2,5-二苯基-1,3,4-噁二唑[(3,4DAOTV)2-OXD],用核磁共振氢谱(1HNMR)、傅里叶变换红外(FTIR)光谱、高效液相色谱(HPLC)和元素分析法(EA)对化合物的结构进行分析和表征.用紫外-可见(UV-Vis)光谱、荧光(PL)光谱及电化学分析研究其光学和电化学性能.在氯仿溶液中,各化合物的紫外最大吸收波长(λmabasx)在382-383nm之间,光学带能隙在2.92-2.97eV之间,荧光最大发射波长在448-452nm之间,发出明亮的青色光,荧光量子产率可达36.8%-37.6%;在固体薄膜状态下,各化合物于513-516nm处发射出亮蓝绿色光.循环伏安法研究显示:三种大π共轭分子在正、负向区域均表现出明显的氧化、还原现象.其中,5.65-5.70eV的电离势(Ip),与噻吩类有机半导体材料的空穴传输特征相符;电子亲和势(Ia)在2.74-2.88eV之间,与有机电子传输材料的特性相近,这利于电子从阴极的注入和传输.理论计算结果表明,该D-A-D型共轭分子共平面性好和电荷离域程度高,对光电功能材料的分子界面组装、载流子的有效传输和器件量子效率的提高十分有利.     

Bistable electrical switching and memory effects in a thin film of copolymer containing electron donor-acceptor moieties and europium complexes

A nonconjugated methacrylate copolymer (PCzOxEu) containing carbazole moieties (electron donors), 1,3,4-oxadiazole moieties (electron acceptors), and europium complexes in the pendant groups was synthesized via free radical copolymerization of methacrylate monomers containing the respective functional groups. The molecular structure and composition of PCzOxEu was characterized by elemental analysis, FT-IR, 1H NMR, 13C NMR, UV-vis absorption and fluorescence spectroscopies, gel permeation chromatography (GPC), X-ray photoelectron spectroscopy (XPS), and cyclic voltammetry (CyV). The resulting copolymer exhibited a relatively high glass transition temperature (Tg approximately 125 degrees C) and good solubility in common organic solvents. It could be cast into transparent films from solutions. For a thin film of PCzOxEu sandwiched between an indium-tin oxide (ITO) electrode and an Al electrode (ITO/PCzOxEu/Al), the structure behaved as a nonvolatile flash (rewritable) memory with accessible electronic states that could be written, read, and erased. The polymer memory exhibited an ON/OFF current ratio up to 10(5), switching response time of approximately 1.5 micros, more than 10(6) read cycles, retention time of more than 8 h, and write/erase voltages of about 4.4 V/-2.8 V under ambient conditions. The roles of oxadiazole moieties in improving the response time and retention time of the memory device were elucidated from the molecular simulation results.     

新型超支化荧光聚合物的合成及光物理性质

通过Wittig法合成了一种新型三苯胺-噁二唑超支化共轭聚合物HPTPA-OXD, 通过IR, ¹H NMR, 凝胶渗透色谱(GPC)等对其结构进行了表征. 测定了HPTPA-OXD在不同溶剂中的紫外吸收光谱、荧光光谱、荧光寿命及量子产率. HPTPA-OXD在甲苯, CHCl₃, THF, CH₂Cl₂, DMF溶液中的荧光发射峰分别为473, 497, 507, 522和547 nm, 在CH₂Cl₂, 甲苯和THF中量子产率分别为0.33, 0.31和0.18, 在THF, CH₂Cl₂, DMF中的荧光寿命分别为1.24, 1.39和1.14 ns. 电化学性能用循环伏安法测定, 超支化荧光聚合物HPTPA-OXD的HOMO和LUMO能级分别为－4.91和－2.44 eV. HPTPA-OXD的分解温度为440 ℃, 热稳定性良好.     

MOLECULAR DESIGN OF LIGHT EMITTING POLYMERS

Fluorene-based alternating and statistical copolymers were synthesized by employing reaction methods of Wittig,Heck and Suzuki. The copolymers were classified into three groups with the photoluminescence (PL) emission maxima at420, 475 and 500 nm, respectively. Statistical copolymers with two chromophores having PL emission maxima at 420 and475 nm emitted light with the emission maximum at 475 nm on photoexcitation at 365 nm and improved the quantumefficiency by the energy transfer. However, the intramolecular energy transfer was inefficient compared to the intermolecularenergy transfer when the two chromophores were apart from each other in the range of the Forster critical distance. Fluorene-pyridinedivinylene alternating copolymer was synthesized by the Wittig reaction and found to have physical, electronic andelectrochemical properties of the individual units intact. The double-layered light emitting diode (LED) with the statisticalcopolymer as an emitting layer and the pyridine-containing copolymer as an electron transporting-hole blocking layer, whichwere sandwiched between ITO and Al, displayed a quantum efficiency of 0.1%.     

Synthesis and photophysical characteristics of 2,7-fluorenevinylene-based trimers and their electroluminescence

Three new 2,7-fluorenevinylene-based trimers were synthesized and characterized. The synthesis was carried out by the Heck coupling reaction of 9,9-dihexyl-2,7-divinylfluorene with 2-(4-bromophenyl)-5-phenyl-1,3,4-oxadiazole, N,N-diphenyl-4-bromoaniline, or 3-bromopyrene to afford the trimers OXD, TPA, and PYR, respectively. All the trimers were readily soluble in common organic solvents such as tetrahydrofuran, dichloromethane, chloroform, and toluene. Their glass transition temperatures ranged from 33 to 60 degrees C. The UV-vis spectra showed an absorption maximum at lambda(a,max) = 379-417 nm with optical band gap of Eg = 2.47-2.66 eV. In solution, they emitted strong blue-green photoluminescence (PL) with PL maximum at lambda(f,max) = 455-565 nm and fluorescence quantum yield of Phi(f) = 0.65-0.74. On the other hand, in their spin-coated films, the PL efficiencies significantly decreased due to the presence of concentration quenching. All samples showed nanosecond transient lifetime containing two components, suggesting excimer formation. The organic light-emitting diodes (OLEDs) with OXD and TPA showed green emission with electroluminescence (EL) quantum efficiencies of eta(EL) approximately 10(-2)%, while very weak EL efficiency of eta(EL) approximately 10(-5)% was observed with PYR. The highest occupied molecular orbital (HOMO) levels of the films were found to be 5.05-5.75 eV.     

Novel Bipolar Conjugated Polymer Containing Both Triphenylamine and Oxadizole Units

A novel bipolar conjugated polymer containing triphenylamine and 1,3,4-oxadiazole units was synthesized by Suzuki reaction.Its structure and properties were characterized by NMR,IR,UV-Vis,PL spectroscopy and electrochemical measurement. The photoluminescent spectroscopy and cyclic voltammograms measurement demonstrated that the resulting polymer shows blue emission (477 nm) and possesses both electron and hole-transporting property.     

Synthesis and characterization of a novel main chain oxadiazole-based copolymer for n-type solar cell material

A novel oxadiazole-based copolymer has been successfully synthesized through the palladium-catalyzed cross-coupling polycondensation method.The copolymer P is soluble in common organic solvents.Its structure has characterized by ~1H NMR,~(13)C NMR,gel permeation chromatagraphy (GPC),UV-vis absorbance (Abs) and photoluniminescence (PL) spectroscopy,and cyclic voltammetry (CV).Investigation of its optical properties revealed that it is yellow emitting material,and the electrochemical analysis showed that P was well suited poly (2,5-dioctyloxy-p-phenylenevinylene) (PDOCPV) for photovoltaic devices,so the copolymer P is able to act as an electron acceptor in combination with PDOCPV as the electron donor to quench photoluminescence of the copolymer in the blend,indicative of the efficient photoinduced electron transfer from the PDOCPV to the P.     

Synthesis and photophysics of novel 8-hydroxyquinoline aluminum metal complex with 1,3,4-oxadiazole units

A novel luminescent metal complex, (OXHQ)3Al, with 8-hydroxyquinoline aluminum and electron-transporting 1,3,4-oxadiazole unit was designed and synthesized. The photophysical processes were investigated by UV-vis absorption and fluorescence emission spectra in diluent solution. The results showed that the luminescence quantum yield of (OXHQ)3Al was 0.67 in DMSO and it emitted blue light with the band gap of 3.13 eV estimated from the onset absorption. In addition, the light-emitting of (OXHQ)3Al can be quenched by electron acceptor (dimethylterephalate), where the processes followed the Stern-Volmer equation. However, with the addition of electron donor (N,N-dimethylaniline) fluorescent intensity of (OXHQ)3Al was increased and emission peak was lightly blue-shift. Furthermore, the molecular interactions of (OXHQ)3Al with fullerene (C60) or carbon nanotubes (CNTs) were also carefully investigated.