漆酚缩甲醛钕聚合物的特性与表征

由漆酚甲醛缩聚物(PUF)与三氯化钕制备漆酚缩甲醛钕聚合物(PUFN), 并采用元素分析、 IR、 DMTA和GPC对其进行表征. 结果表明, PUF与Nd3+发生配位反应, 其产物PUFN的弹性模量比PUF的大, 热稳定性提高, 并且具有优良的耐化学介质腐蚀性能, 对正丁醇和冰乙酸的酯化反应具有催化活性.     

漆酚缩甲醛镧配合物的制备、结构及性能

利用漆酚缩甲醛(PUF)和三氯化镧在非水热溶剂中反应制得漆酚缩甲醛镧配合物(PUFLa)，IR、XPS和TG表征结果表明：三氯化镧中La^3 与漆酚缩甲醛中酚羟基上的氧形成了配位键；在La^3 的作用下，PUF上的侧链进一步交联聚合。PUFLa在亚硫酸钠水溶液中能引发催化甲基丙烯酸甲酯聚合。通过正交实验设计考察了PUFLa用量、反应温度、反应时间、单体甲基丙烯酸甲酯用量和亚硫酸钠浓度对单体转化率的影响。结果表明。反应温度和反应时间是影响单体转化率的主要因素。PUFLa还具有良好的耐热性和抗溶剂性。     

电化学聚合漆酚稀土配合物的合成与表征

采用电化学方法合成的聚合漆酚(EPU)与三异丙氧基稀土Re(Pr,Nd,Eu)反应,生成稀土金属配合物(EPU-Re3+)。利用FT-IR、荧光光谱、XPS、DMTA、AES等手段对其表征,探讨其结构与性质。证明了配合物中存在着稀土金属离子Re3+与EPU的配位作用,并引起进一步的交联,因而难溶于绝大多数有机溶剂,而且其玻璃化转变温度和耐热性能均得到提高。     

漆酚缩甲醛钕聚合物催化合成环己酮乙二醇缩酮

以环己酮和乙二醇为原料,漆酚缩甲醛钕聚合物为催化剂合成了环己酮乙二醇缩酮。实验结果表明：在环己酮100mmol,n(环己酮)：n(乙二醇)=1：1,漆酚缩甲醛钕聚合物3．0g,环己烷7．5mL,回流反应1．0h,目标化合物的收率达74％。     

电化学聚合漆酚-锌金属螯合物合成及性质研究

以电化学方法合成了聚合漆酚（ＥＰＵ）,并用ＥＰＵ与二异丙氧基锌作用生成漆酚金属螯合物「ＥＰＵ－Ｚｎ（Ⅱ）」,采用原子发射光谱（ＡＥＳ）、ＦＴ－ＩＲ、ＤＭＴＡ、ＴＧ－ＤＴＡ和ＸＰＳ等对其进行表征,探讨其结构与性质。证明了螯合物中存在着因Ｚｎ（Ⅱ）和ＥＰＵ配位作用而引起的交联,故难溶于绝大多数的有机溶剂,玻璃化转变温度和耐热性能的提高。     

漆酚钼螯合高聚物的合成及表征

采用漆酚与四氯氧化钼反应制得兼具螯合物特点和生漆固有性能的漆酚钼螯合高聚物 (PUM) .对不同反应条件下制备的高聚物的含钼量进行了测定 .并通过元素分析、红外光谱、电子顺磁共振谱、光电子能谱、质谱、高效液相色谱和热失重分析探讨高聚物的生成过程、结构特征和热性能 .结果表明 ,漆酚与四氯氧化钼首先发生氧化还原反应和配位反应生成螯合物 ,然后进一步聚合成为高聚物 ;该高聚物中存在漆酚钼螯合物结构单元且具有很好的热稳定性 ,其耐热性能比生漆和传统黑推光漆好得多 .     

漆树液精油化学成分的研究

用GPC、GC-MS-DS法对中国漆树液中漆酚与虫漆酚精油化学成分进行了研究。其主要成分为3-C₁₅和C₁₇烃基取代的邻苯二酚化合物,其中三烯漆酚和单烯虫漆酚含量最高。其它成分为4-C₁₅,C₁₇烃基取代的邻苯二酚及3-C₁₅和C₁₇烃基取代的单酚化合物。气相色谱分离鉴定组分占精油含量的98%以上。原始漆树液中内含7%～9%漆酚聚合物。     

漆酚镨高聚物吸附有害气体的性能研究

由漆酚和PrCl3在热溶液中合成的漆酚镨高聚物(PUPr),中心原子Pr(Ⅲ)的配位数并未达到饱和,具有进一步接受电子的能力.本文研究了Pr(Ⅲ)接受带孤对电子的有害气体SO2、HCHO、H2S和NH3作为配体的能力及其选择性.结果表明,PUPr对于电负性较大的硬碱配位体SO2的吸附性能较佳,且吸附速率较快,1h吸附量就达到4.05mmol/g.     

稀土钇掺杂Eu(TTA)3/PMMA温敏漆的制备及性能分析

本文以氯化铕、氯化钇、噻吩甲酰基三氟丙酮(TTA)为原料合成了钇掺杂Eu(TTA)3探针分子。将探针分子掺杂到聚甲基丙烯酸甲酯(PMMA)基质中,获得稀土钇掺杂Eu(TTA)3/PMMA温敏漆。采用IR、紫外吸收光谱和激发发射光谱对探针分子结构及温敏漆荧光特性进行了表征。红外光谱表明,稀土Eu(Y)与TTA形成配位键,且钇的掺入未改变Eu(TTA)3结构。紫外吸收光谱表明,探针分子的最佳吸收波段位于290~376 nm处。激发发射光谱表明,在340 nm激发下,温敏漆在614 nm处有最强发射峰,且钇对Eu(TTA)3发光具有增益作用,当钇含量为50%时,增益作用最强。不同温度下发射光谱表明,随着温度的升高,温敏漆的荧光发射强度逐渐减弱,说明温敏漆具有良好的温度猝灭特性,且掺入钇后温敏漆的测温灵敏度有所提高。     

醇水介质中漆酶催化氧化漆酚及其类似物

本文作者在醇水介质中对漆酚及其类似物的酶催化氧化反应进行了研究。探讨了混合溶剂中漆酶的行为。结果发现邻苯二酚被烷基取代后更有利于漆酶的催化氧化。反应可能经过两个步骤,先是底物氧化生成黄色苯醌类物质,然后醌类中间物偶联形成多聚酚。     

Halogen-free flame retardant PUF: Effect of melamine compounds on mechanical, thermal and flame retardant properties

Water blown rigid polyurethane foam (PUF) was prepared with melamine polyphosphate (MPP) and melamine cyanurate (MC) as fire retardant (FR) additives. The effect of these additives on the properties of rigid PUF such as physico-mechanical, morphological, thermo-oxidative stability, flame retardancy and smoke density properties were studied. The mechanical and thermo-oxidative stability of PUF filled with MC was found to be better than those of MPP filled PUF. The insulation property of both MPP and MC filled PUF was improved with respect to the neat PUF. The FR properties of these filled PUF were evaluated by cone calorimeter, limiting oxygen index (LOI), smoke density, rate of burning and char residue estimation. The FR property of MPP filled PUF was better than that of the MC filled PUF.     

Effect of a Nanoclay on the Mechanical,Thermal and Flame Retardant Properties of Rigid Polyurethane Foam

Water blown rigid polyurethane foams (PUF) with organoclay/organically modified nanoclay (ONC) were prepared and their properties such as density, mechanical, morphological, insulation, thermal and flame retardant properties were studied. In this investigation, the ONC content was varied from 1 to 10 parts per hundred of polyol (php) by weight. It was observed that the compressive strength of ONC filled PUF increased up to 3 php of ONC loading and then it decreased. Wide angle X-ray diffraction and transmission electron microscopy studies indicated the exfoliated dispersion of ONC in PUF. The thermal conductivity of ONC filled PUF decreases up to 5 php and then increases. The glass transition temperature (Tg) of PUF decreases on loading of ONC. The TGA analysis shows that there is slight increase in degradation temperature with increase in ONC loading. The flame retardant properties (LOI and flame spread rate) are improved slightly on addition (3 php) of ONC filled PUF.     

Surface Modification of Poly(urea-formaldehyde) Microcapsules and the Effect on the Epoxy Composites Performance

The surfaces of poly(urea-formaldehyde) (PUF) were modified by γ -glycidoxypropyltrimethoxy silane (KH560) in order to improve the interfacial bonding between self-healing PUF microcapsules and epoxy matrix. The modification mechanism between PUF microcapsules and KH560 was studied. X-ray photoelectron spectra (XPS) analyses showed that the silane coupling agent molecular binds strongly to the surfaces of PUF microcapsules. Chemical bond (Si–O–C) and hydrogen bond were formed at interface by the reaction between Si–OH and the hydroxyl group of PUF microcapsules surface. The tensile and impact resistance tests revealed that strength and toughness of the composites was improved significantly. Furthermore, scanning electronic microscopy (SEM) photographs of the fractured surface confirmed that the silane coupling agent plays an important role in improving the interfacial performance between microcapsules and resin matrix.     

Thermal degradation and flame retardancy of rigid polyurethane foams containing a novel intumescent flame retardant

A novel cheap macromolecular intumescent flame retardants (MIFR) was synthesized, and its structure was a macromolecule containing phosphorus characterized by IR. Rigid polyurethane foam (PUF) filled with MIFR as fire retardant additive was prepared. The effects of MIFR on properties such as density, compressive strength, flame-retardant behavior, thermal stability, and morphology of char were studied. The compressive strength of the MIFR-filled PUF increased initially and then decreased with further increase of MIFR content while its density straightly increased. Its flammability and burning behavior were characterized by UL 94 and limiting oxygen index (LOI). Twenty five percent of MIFR was doped into PUF to get 24.5 of LOI and UL 94 V-0. Activation energy for the decomposition of samples was obtained using Kissinger equation. The resultant data show that for PUF containing MIFR, compared with PUF, the mass loss, thermal stability, and the decomposition activation energy decreased, the char yield increased, which shows that MIFR can catalyze decomposition and carbonization of PUF to form an effective charring layer to protect the underlying substrate.     

Determination of hexamethylene-based isocyanates in spray-painting operations. Part 1. Evaluation of a polyurethane foam sponge sampler

A polyurethane foam (PUF) sponge was mounted in a cassette sampler and evaluated as a sorbent for the collection of hexamethylene diisocyanate (HDI) monomer and HDI-based oligomers. Recovery studies indicated 112 +/- 34% average recovery of HDI monomer and 92 +/- 9% and 97 +/- 25% average recovery of HDI-based oligomers when using impregnated PUF sponges. The PUF sponge was also evaluated during actual spray-painting operations. In a series of side-by-side sampling events, an impinger filled with 1-(2-methoxyphenyl)piperazine (MOP) in toluene was compared directly with a cassette sampler containing a PUF sponge impregnated with MOP or 1-(9-anthracenylmethyl)piperazine (MAP) in dimethyl sulfoxide (DMSO). For the analysis of HDI-based oligomer, there is no significant difference (p < 0.05, n = 7) in the air concentration when sampling with either the PUF sponge cassette or the impinger. The results are significant because they indicate that a PUF sponge, which is more convenient than an impinger, may be used for the collection of HDI-based oligomer generated during spray-painting operations.     

Characterization of solid-phase extraction of Fe(III) by unloaded polyurethane foam as thiocyanate complex

This work presents a detailed study about the adsorption of iron(III)-thiocyanate complexes onto unloaded polyether-type polyurethane foam (PUF). A novel strategy was employed for this purpose, utilizing the adjustment of the plug cylinder of PUF to the arm of an overhead stirrer. The system was characterized in relation to equilibrium and kinetic aspects and it was modeled by applying Langmuir and Freundlich isotherms. The results obtained showed that adsorption occurs on a monolayer and that external transport of the solute from solution to adsorbent was the rate-determining mechanism. A maximum adsorption capacity of 2.06 x 10(-4) mol Fe g(-1) was obtained under established experimental conditions (0.5 mol L(-1) SCN(-) and 0.005 mol L(-1) HCl). Sequential extraction experiments were carried out by changing PUF in time intervals previously defined (5, 20, and 40 min), and the obtained results showed that it is possible to remove around 95% of the Fe(III) in solution through five consecutive extractions of 5 min with five 200 mg PUF cylinders.     

Effect on the Chromatographic Behavior of Gold of the Process Used to Acid-Wash Polyurethane Foam

The effect on polyurethane foam (PUF) of washing with different concentrations of HCl (1, 3, 6, or 11.8 M) has been studied. After washing, PUF was characterized by use of different techniques. The adsorption properties of PUF and its chromatographic behavior in the separation and preconcentration of gold from thiocyanate solution were investigated by batch and dynamic processes. Uptake of Au(III) was maximum after washing with 0.05–0.2 M HCl. The kinetics of adsorption of the Au(III) were found to be rapid; the average half-live of adsorption (t _1/2) was 60 s. Average values of the thermodynamic quantities ΔH and ΔG were −40.7 and −5.9 kJ mol⁻¹, respectively. These data indicate that adsorption of Au(III) by white PUF proceeds via both weak anion exchange and an ion-association mechanism. PUF was verified as a good adsorbent by determination of Au(III) in spring water and in gold alloy samples.     

Phenol‐urea‐formaldehyde cocondensed resol resins: Their synthesis,curing kinetics,and network properties

Several phenol‐urea‐formaldehyde (PUF) cocondensed resol resins were synthesized by different procedures. The curing kinetics and network properties of these PUF resins were examined by differential scanning calorimetry (DSC) and dynamic mechanical thermal analysis (DMTA). A kinetic study indicated that the activation energy values of PUF resins are generally higher than those of phenol‐formaldehyde (PF) resins during curing processes, but the curing rates of PUF resins are faster than those of PF resins. The pH values of PUF systems have a significant influence on the rate constants, although they affect the activation energy very slightly. Moreover, the dependence of activation energy on the conversion showed that there are more individual reactions with different activation energies occurring during the curing processes in PUF resins than in PF resins. The decomposition of methylene ether bridges to form methylene bridges probably occurs at high temperature in PUF resins. DMTA data indicated that the network rigidity of PUF resins is slightly lower than that of PF resin. The gel point and T_{tan δ2} transition measured by DMTA were consistent with the kinetic results obtained from the DSC data, but they were also related to the physical and mechanical properties of the network, especially with regard to the T_{tan δ2} transition. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1929–1938, 2003     

Synthesis and characterization of novel magnetic Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>/polyurethane foam composite applied to the carrier of immobilized microorganisms for wastewater treatment

The objective of this work was to prepare novel magnetic Fe₃O₄/polyurethane foam (Fe₃O₄/PUF) composites applied to the carriers of immobilized microorganisms for toluene-containing wastewater treatment. The morphology and structure of Fe₃O₄/PUF composite were characterized by X-ray diffraction, Fourier transform IR spectroscopy, thermogravimetric analysis, differential scanning calorimetry, scanning electron microscopy, and magnetic property measurement system. These morphological investigations revealed that Fe₃O₄ nano-particles were well dispersed into the matrix of PUF with nano-scale diameter particles. TG experiments indicated that the initial thermal weight loss temperatures of composite with the content of 2.5 wt% and 7.5% Fe₃O₄ were increased by 7 and 16 °C, compared with pure PUF. The degradation efficiency of toluene with magnetic PUF composite was much higher than that of pure PUF carrier, and the reason why the immobilization of microbial biomass of microorganisms on the magnetic PUF composite was much higher than that of the pure PUF. The prepared magnetic Fe₃O₄/PUF composite offered excellent thermal stability and medium paramagnetic properties. And this composite could not only increase the immobilized biomass of the microorganisms, but also enhance the COD removal efficiency of wastewater.