混合型中性载体PVC膜pH电极的研究

本文以菸酸十八烷基酯和二辛基十八胺两性载体混合研制成ＰＶＣ膜ＰＨ电极，采用正交实验设计优化了电极的膜组成，测得电极的ＰＨ线性响应范围为１．８－１２．１，秦为５５．６ｍＶ／ｐＨ（１８℃），获得满意结果。     

丁基罗丹明B-AuCl_4~-缔合物作电活性物的PVC膜Au(Ⅲ)电极

关于Au(m)电极的研制已有文献报道,但用碱性染料研制聚氯乙烯(PVC)膜电极尚未见报道。本文以碱性染料丁基罗丹明B与AuCl_4~-形成的缔合物作为电活性物质,运用正交试验法选择较佳的膜组分配比和底液组成及浓度,研制成性能良好的Au(Ⅲ)电     

PVC膜离子选择电极检测下限的优化

价格低廉、携带方便、适用浓度宽、操作简单快捷、能耗低的离子选择电极在医院、分析实验室、野外等领域得到了越来越广泛的应用。尽管如此,由于PVC膜中存在的离子流严重破坏了更低检测下限的获取,限制了离子选择电极的进一步发展。因此,本文从减小甚至消除PVC膜中存在的离子流角度出发,系统论述了优化PVC膜离子选择电极检测下限的原理和优良策略,根据收集归纳的大量数据定量阐述传感膜组成的优化、电极组装和调制、应用旋转电极以及电流极化处理等对检测下限的优化提升作用,进一步总结出各种方法的改善规律,分析它们的优势和面临的问题。提出在PVC铸膜液中要突破传统配方,减小增塑剂和离子交换剂用量,以抑制传感膜两侧的离子流,同时外加电流补偿处理等也是降低电极检测下限的有效方法,对检测下限的改善最好的可降低5个数量级。这一总结为PVC膜离子选择电极的高性能化明确了研究方向。     

质子交换膜燃料电池膜电极

介绍了质子交换膜燃料电池膜电极的组成，电极反应，综述了近年来膜电极的研制方法。探讨了该电池电极制作过程的关键问题及技术。     

邻菲咯啉冠醚衍生物为载体的伯胺药物电极及机理研究

合成了邻菲咯啉-18-冠-6等四种含邻菲咯啉结构的冠醚化合物, 并用作载体制备伯胺电极, 以苄胺为模型化合物, 研究了电极特性, 并制备了测试美西律药物的选择性电极。研究了实验条件对电极性能的影响。用正交多项式回归法优化电极的膜组成。苄胺电极的线性范围1.0×10^-5~0.1mol/L, 斜率55.6mV/pc, 检测下限2.0×10^-6mol/L。美西律电极的线性范围6.0×10^-6~0.1mol/L, 检测下限8.0×10^-7mol, 斜率58.0mV/pc。同时研究了冠醚推动伯胺穿透大块液膜的传输行为。     

5—羟色胺敏感膜电极的研究 Ⅰ.离子缔合型5—羟色胺膜电极的研制

5-羟色胺(5-HT)与许多疾病的发生和发展有关。应用正交试验,研究了离子缔合型5-HT敏感膜电极的最优化膜组成。筛选了由3种定域体,7种增塑剂组成的213个配方,选定了以四苯硼-5-HT离子缔合物为活性物、磷酸三(2-乙基己基)酯为增塑剂的涂碳PVC膜电极。电极各项性能良好,其线性范围为1.00×10~(-2)～1.58×10~(-5)mol/L,检测下限为4.17×10~(-6)mol/L,斜率为59.7mV/p5-HT。电极寿命超过39天,用混合溶液法测定了体液中可能存在的17种物质的选择性系数。已用该电极测定了牛血小板中的5-HT。     

化学修饰电极的研究 Ⅵ.聚乙烯二茂铁膜电极的表面表征和组成

本文研究了用等离子体法在玻璃炭上制备聚乙烯二茂铁(PPVF)膜电极的伏安行为及其XPS分析.结果表明PPVF膜电极的伏安行为和组成均与其制备条件有关.PPVF膜电极的二茂铁与二茂正铁之间的氧化还原反应是在电极上快速进行电荷转移的电化学过程.PPVF膜电极的伏安特性受膜中电活性物量、膜的厚度和组成的影响.伏安法和XPS法都可以用来表征PPVF膜制备条件的变化.     

电解液组成对中间相石墨微球电化学性能的影响

以2800℃热处理的煤焦油沥青基中间相石墨微球为锂离子二次电池负极材料,考察了中间相石墨微球在不同组成的电解质溶液中的电化学嵌脱锂性能.确定了试样在不同电解液中电极表面生成的SEI膜的化学组成和相对含量,剖析了共溶剂对SEI膜形成反应、膜组成和织构的影响.结果表明,在不同共溶剂的EC基电解液中,电极界面SEI膜形成的电位虽然不同,但SEI膜的化学组成基本相同,负极界面SEI膜的织构是决定电解液与电极材料相容性的关键.     

具有阳极氧化膜的镁合金电极性能的研究

镁合金电极上生成阳极氧化膜的保护技术，使电极耐大气腐蚀的性能大大优于用铬酸盐膜保护的镁电极。阳极氧化工艺条件不同。镁电极的耐腐蚀性和电压滞后性能不同，本文讨论了膜的组成，形态，厚度等对性能的影响。     

高精度无损质子交换膜燃料电池膜电极Pt载量与分布测试方法

随着质子交换膜燃料电池商业化的推进,为提高膜电极制造的可重现性,保障膜电极制造工艺的产品控制,需要Pt载量和分布无损高精度在线检测提供技术支撑。根据欧姆定律与焦耳定律,利用质子交换膜燃料电池膜电极在直流激励电压下产生的电流密度和热分布信号可以对膜电极电阻进行分析,通过膜电极Pt载量与其电阻的关系就可以实现膜电极Pt载量和空间分布分析。通过不同直流激励电压下电流测试,证明了膜电极电阻与Pt载量反相关,Pt载量定量表征精度为0.0008～0.0025 mg/cm²;利用红外热成像法对直流激励电压下膜电极热分布信息的采集成功实现了Pt载量分布的定性分析;最后,通过直流激励前后膜电极性能的对比证明了该方法对膜电极性能是无损的。高精度无损的直流激励测试方法可以实现膜电极Pt载量的高效在线测试,提高膜电极质量和制造效率,降低膜电极制造成本,对于质子交换膜燃料电池大规模商用具有重要意义。     

Effect of lipophylic salts on ise detection limit: application to calixarene-based highly efficient potassium-selective electrodes

A new interpretative model for interpolation of potentiometric data from liquid membrane ion selective electrodes has been formulated; the model allows one to achieve information about partitioning equilibria establishing at the membrane-analysed solution interface of hydrophilic cations present in the membrane as counterions of exchanger lipophylic anions. The fundamental importance of such equilibria is related to their contribution to the detection limit of the electrodes. The soundness of the proposed model was positively verified by employing it in the characterization of new K(+)-selective electrodes based on a calixarenic ionophore. Although the validity of interpolation based on our model does not significantly differ from that obtained with the simpler model providing the inclusion of a constant parameter in the logarithmic argument of Nicolski-Eisenman's equation, the information obtained resulted to be analytically suitable for optimising the membrane composition and, as a consequence, the performance of the electrodes.     

Silver and lead all-plastic sensors—polyaniline vs. poly(3,4-ethyledioxythiophene) solid contact

Silver and lead selective all-plastic ion-selective electrodes were obtained using poly(vinyl chloride)-based membranes and either poly(3,4-ethylenedioxythiophene) or polyaniline dispersion cast on an insulating plastic support as transducer and electrical lead. The effect of interactions of applied conducting polymer with analyte ions on potentiometric responses was evaluated and correlated with changes in elemental composition and element distribution within the ion-selective membrane and the conducting polymer transducer revealed in course of laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) experiments. In the case of silver selective electrodes, potentiometric responses obtained are much dependent on the oxidation state of the polymer placed beneath the ion-selective membrane. For semi-oxidized polymer (poly(3,4-ethylenedioxythiophene)-based electrodes, linear responses with detection limit equal to 10^−5.4 M were obtained. For a more oxidized polyaniline (of higher conductivity), although the electrodes were pretreated exactly in the same way and tested in parallel, super Nernstian potential slope was recorded within the AgNO₃ activities range form 10⁻⁶ to 10⁻⁷ M. These responses were consistent with results of LA-ICP-MS, revealing profoundly higher silver signals intensities for poly(3,4-ethylenedioxythiophene) underlying silver selective membrane. It seems highly probable that silver is accumulated in this polymer layer as Ag⁰ due to spontaneous redox reaction leading to oxidation of the polymer; however, this process requires also the presence of silver ions at the interface. In fact, when reduced (deprotonated) polyaniline was used as transducer, the potentiometric responses of the sensor were, within the range of experimental error, the same as obtained for poly(3,4-ethylenedioxythiophene)-based sensor. On the other hand, for lead(II) selective sensors, the difference in responses of electrodes prepared using poly(3,4-ethylenedioxythiophene) or polyaniline was less pronounced, which is in accordance with the elemental composition of these sensors.     

Application of various electrodes in potentiometric titration of calcium

In complexometric titrations various indicator electrodes may be employed for monitoring the course of titration and for detection of the end-point. Several of them, including the silver, mercury, bivalent cation membrane, calcium membrane and manganese dioxide electrodes were investigated and compared in their usefulness. As titrant, EDTA was mostly used, but results with similar chelating titrants were also obtained. The practical utility of the electrodes in titrations depends on their selectivity, magnitude of the end-point break and precision in determination of the end-point. For the electrodes studied, in some instances there is good correlation between the theoretical and experimental titration curves, but it is not always possible to predict the electrode response in the low activity range. In other cases poor correlation does not mean that reasonably good analytical results may not be obtained.     

Immobilization of silver nanoparticles obtained by electric discharge method on a track membrane surface

Composite poly(ethylene terephthalate) track membranes containing immobilized silver nanoparticles with the aim of using them for surface-enhanced Raman scattering spectroscopy have been obtained and studied. A dispersion of negatively charged silver nanoparticles has been synthesizes by the method of pulsed electrical discharge between silver electrodes immersed in distilled water. To ensure the electrostatic deposition of nanoparticles onto the track membrane surface, it has been modified with polyethyleneimine. The composition and morphology of the surface of the obtained composite membranes have been studied by X-ray photoelectron spectroscopy and scanning electron microscopy. Aggregation of nanoparticles on the surface has been analyzed. The coefficient of Raman-scattering enhancement has been determined by the example of rhodamine 6G molecules adsorbed on a membrane with immobilized silver nanoparticles.     

Computer Simulation of Binary Platinum–Cobalt Nanoclusters Interaction with Oxygen

On the basis of the quantum-chemical method of density functional theory (DFT) in cluster approximation binary nanoclusters of platinum-cobalt are simulated and their interactions with molecular and atomic oxygen are calculated. It was shown that a binary nanocluster Pt₃₇Co₁₈, constructed of platinum atom outer shell, has the lowest adsorption heat for both molecular and atomic oxygen. This may contribute favorably to accelerate oxygen reduction on catalytic electrodes. The results obtained are in good satisfaction with known experimental and theoretical data, indicating the perspectives of the proposed approximation for theoretical search of chemical composition and structure of effective binary nanocatalysts with platinum as cathode materials in low temperature membrane fuel cells.     

Improved dynamic response of potentiometric ammonia sensors using pure teflon membranes

Several microporous membrane parameters are investigated in an attempt to improve the dynamic response of ammonia gas-sensing electrodes. Parameters of interest include hydrophobic and support membrane porosities as well as support polymer composition. Results show that the electrode recovery process represents the major component of the total dynamic response and that, of the teflon membranes currently available, the 0.02-μm pure teflon membrane is the membrane of choice for these electrodes.     

Tailoring Solution Cast Poly(3,4‐dioctyloxythiophene) Transducers for Potentiometric All‐Solid‐State Ion‐Selective Electrodes

A novel concept of tailoring potentiometric responses of all‐solid‐state ion‐selective electrodes was introduced. The effect of composition and resulting properties of the conjugated polymer transducer, placed between the electrode support and ion‐selective membrane, on analytical characteristic of obtained sensors was studied.     

Coated wire thorium ion selective electrode: Part I

Coated wire ion selective electrode for thorium ion selective potentiometry was developed. Thorium ion selective coated wire electrodes were prepared by depositing a membrane comprising of Aliquat-336 loaded with Th(NO₃)₆²⁻ ions and poly vinyl chloride in varying proportion. A linear near-Nernstian response with a slope of −29.5 ± 0.3 mV over thorium concentration range of 1 × 10⁻¹–3 × 10⁻⁵ M in constant total nitrate concentration of 6 M was obtained for the electrodes of almost all the composition studied. In spite of small drift in response potential from composition to composition, day to day as well as from electrode to electrode, the slope of potential response line was constant within experimental error. Moreover, the electrode once prepared could be conveniently used over a period of one and half month.     

The ion adsorption effect on selectivity of liquid state, O,O'-didecylodithiophosphate chelate based ion-selective electrodes

Ion-selective electrodes with liquid membranes including O,O′-didecylo-dithiophosphate complexes of Tl(I), Pb(II), Cd(II) and Ni(II) are characterised and results of the study on their selectivity are reported. A short review of problems related to determination and interpretation of selectivity coefficients of ion-selective electrodes is presented with particular emphasis on the drawbacks of the hitherto used methods. A new method is proposed, which in the experimental part is close to that of mixed solutions recommended by IUPAC but can be applied also when the latter is of no use. The method proposed for determination of selectivity coefficients simultaneously allows concluding about the mechanism of potential generation. A few examples of relations between selectivity coefficients of the electrodes and concentrations of disturbing ions in solutions, are given. An interpretation of the above relations as results of the processes of ion adsorption at the interface of the electrode membrane and water solution is proposed. The results obtained have confirmed the hypothesis given by Pungor, according to which the main role in the mechanism of generation of ion-selective electrodes potential is played by the processes of ion chemisorption at the interface of the membrane and water solution.