NMR study of the nanomorphology in thin films of polymer blends used in organic PV devices: MDMO‐PPV/PCBM

The disclosure of the nanomorphology of thin films in organic solar cells, prepared from blends of conjugated polymers and PCBM, is of key importance for a better understanding of the occurring photovoltaic (PV) mechanisms. Hereto solid‐state NMR relaxometry has been evaluated as a complementary technique to traditional microscopic techniques like atomic force microscopy and transmission electron microscopy. It is demonstrated that proton wide‐line solid‐state NMR relaxometry is a useful and innovative tool to study the phase morphology of blends used in semi‐conducting polymer based PV devices. Attention is focused on the influence of the blend composition and casting conditions on the resulting phase morphology. Two different casting techniques, i.e. spincoating and Doctor Blading, were compared. To demonstrate the applicability of NMR relaxometry in this field, MDMO‐PPV/PCBM blends where used, since these are known for their significant phase separation behavior in combination with toluene as solvent. In films prepared from blends in toluene with a PCBM content ≥70 wt %, a fraction of the PCBM is phase separated into crystalline domains, whereas the remaining part remains homogeneously mixed with the MDMO‐PPV. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 138–145, 2008     

Influence of the processing solvent on the photoactive layer nanomorphology of P3HT/PC60BM solar cells

In this article, it is demonstrated that doctor blading of thin poly‐3‐hexylthiophene/phenyl‐C₆₁‐butyric acid methyl ester (1/1) bulk‐hetero junction films from toluene leads to an improved nanocrystallinity, when compared with their unannealed chlorobenzene processed counterparts. This difference in morphology was demonstrated by solid‐state NMR and Rapid Heating Cooling Calorimetry (RHC), being useful complementary techniques to investigate the active layer morphology of photovoltaic devices. An increased PC₆₀BM nanocrystallinity is indicated by several NMR relaxation decay times (T_1C, T_1H, and T_1ρH) and confirmed by an increase of the melting enthalpy in RHC experiments. An improved solar cell performance further strengthens this conclusion. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Improved phase separation in polymer solar cells by solvent blending

The effect of solvent blending on the performance of an anthracene‐containing poly(p‐phenylene‐ethynylene)‐alt‐poly(p‐phenylene‐vinylene) backbone‐based donor polymer with asymmetrically substituted branched 2‐ethylhexyloxy and methyloxy side‐chains in bulk heterojunction solar cells is reported. This copolymer yields relatively high open‐circuit voltages with fullerene‐based electron acceptors. We systematically studied the thin‐film blend morphology and solar cell performance as a function of solvent composition (chlorobenzene to chloroform ratio) and polymer to [6,6]‐phenyl C61‐butyric acid methylester (PCBM) ratio. We combined photophysical investigations with atomic force microscopy and grazing incidence wide‐angle X‐ray scattering to elucidate the solid‐state morphology in thin films. In the investigated polymer system, the blend morphology becomes independent of the supporting solvent for high PCBM concentrations. Deposition from solvent blends rather than from pure chlorobenzene facilitates the beneficial phase separation between polymer and PCBM, leading to improved charge transport properties (short‐circuit currents) at lower PCBM concentrations. © 2013 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013, 51, 868–874     

Polymer‐regulated pattern formation in pseudo‐2D arrays of a fullerene derivative at the solution—Air interface

Self‐assembly of nanoparticles (NPs) into nonclose‐packed (ncp), semi‐two‐dimensional (2D) arrays is of interest in a variety of applications. Of special interest are photochemically active surfactant‐like fullerene derivatives [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester (PCBM). The study presented here characterizes the morphology and structure of patterns formed by a mixture of PCBM NP and an amphiphilic block‐copolymer tethered at the water–air interface (a surface brush) as a function of the concentration of poly(ethylene oxide) (PEO) dissolved in the liquid subphase. Theoretical modeling of the system shows that the concentration of PEO in the subphase mediates the dimensions of the surface brush and at high PEO concentrations induces a collapse of the brush at the solution–air interface. The state of the surface brush is suggested to tune the semi‐2D patterns observed in the experiments via lateral depletion interactions and, in particular, induce lateral phase separation of the PCBM‐block copolymer. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Ethylene polymerization using novel titanium catalytic precursors bearing N,N‐dialkylcarbamato ligands

Polymerization catalysts based on N,N‐dialkylcarbamato complexes of titanium(IV) appear particularly interesting, because these novel catalytic precursors are rather cheap and easy to synthesize and handle. This contribution reports ethylene polymerization behavior of titanium(IV) complexes of general formula Ti(O₂CNR₂)₄ R = Me ( I ) and Et ( II ) and TiCl₂(O₂CNMe₂)₂ ( III ). These precursors in conjunction with methylaluminoxane resulted active catalysts for the polymerization of ethylene, affording high‐density polyethylene with limited branch content. The influence of the polymerization parameters was studied with particular reference to the type of catalyst components, solvent, temperature, monomer concentration, and Al/Ti ratio. The nature of the solvent appears crucial for catalytic performances: when toluene was replaced by chlorobenzene, a significant increase of the productivity was ascertained. The obtained polymers were characterized by DSC, size exclusion chromatography, FTIR, and NMR techniques. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Impact of side‐chain length on the phase structures of P3ATs and P3AT:PCBM films as revealed by SSNMR and FTIR

It is known that poly(3‐alkylthiophene) (P3AT) side‐chain length notably influences the photovoltaic performances of relating devices. However, comprehensively study on its impact on the structures of P3ATs and their blends with [6, 6]‐phenyl‐C₆₁ butyric acid methyl ester (PCBM) is insufficient. By using solid‐state NMR and FTIR techniques, four P3ATs and their PCBM blends are investigated in this work, focusing on the phase structures as modulated by side‐chain length. Recently, we revealed multiple crystalline main‐chain packings of packing a and b together with a mesophase in poly(3‐butylthiophene) (P3BT) films (DOI: 10.1021/acs.macromol.6b01828). Here, the semicrystalline structures are investigated on poly(3‐hexylthiophene) (P3HT), poly(3‐octylthiophene) (P3OT), and poly(3‐dodecylthiophene) (P3DDT) with traditional form I modification, where packing a and the amorphous phase are probed. Furthermore, crystallized side chain within packing a is detected in both P3OT and P3DDT films, which shows a FTIR absorption at 806 cm⁻¹. Structural studies are also conducted on P3AT:PCBM blends. Compared with the pure P3ATs, the polymer crystallinities of the blends show reduction of about 40% for P3OT and P3DDT, whereas only about 10% for P3HT. Moreover, in P3BT:PCBM and P3HT:PCBM, the crystalline polymers and PCBM are phase separated, while in P3OT:PCBM and P3DDT:PCBM, blend components are mostly miscible. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 751–761     

Magnetic orientation of diamagnetic amorphous polymers

Molecular order in an amorphous polymer with anisotropic magnetic susceptibility is altered by applying external magnetic fields. Disks of atactic polystyrene (a‐PS) are prepared by solvent casting outside or inside a magnet. The effect of the magnetic field on the polymer samples is investigated by magnetic levitation and solid state NMR spectroscopy. Magnetic levitation of the a‐PS disks shows that the orientation of disk symmetry axis with respect to the magnetic field gradient depends on the magnitude and direction of the applied field during casting. Similarly, carbon‐13 two‐dimensional cross‐polarization/magic angle spinning rotor‐synchronized NMR measurements in these samples show modulation patterns of the spinning side bands only on disks prepared in the presence of a magnetic field. These findings suggest that macromolecular order could be induced in a fluid or fluid–solid phase transition with cooperative segmental motions reorienting the diamagnetic susceptibility tensor to minimize the magnetic contribution to free energy of the sample. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1009–1015, 2010     

The NSN link as electron accepting moiety for stable,solution‐processable conjugated oligomers

New conjugated oligomers, oligo(9,9‐didodecylfluorene‐bis‐sulphurdiimide), consisting of 9,9‐didodecylfluorene separated by ? N?S?N? moieties, are reported. These oligomers are stable purple solids under ambient conditions with absorption covering a broad spectral window in the UV‐vis range and a main broad peak centered at 555 nm with onset extending to 700 nm. These oligomers show an obviously longer conjugation length than its dimeric analogue, bis‐9,9‐didodecyl‐fluorene‐2‐sulfurdiimide that shows a band‐edge absorption centered at 484 nm with onset at 590 nm. The dimer and oligomers are soluble in a variety of organic solvents. Moreover, we found that the oligomer with an average repeating‐unit number of six could significantly quench the photoluminescence (PL) of poly[2‐methoxy‐5‐(2′‐ethyl‐hexyloxy)‐1,4‐phenylene vinylene] (MEH‐PPV) or poly(3‐hexylthiophene) (P3HT) in the solid state. More importantly, the composites of this oligomer with P3HT showed a nearly 10‐fold enhancement of the photocurrent, compared with that of P3HT itself. In addition, the PL of this oligomer could be quenched by the presence of phenyl‐C₆₁‐butyric acid methyl ester (PCBM) in toluene. These results suggest the presence of photoinduced charge transfer in composites of these oligomers blended with an electronic partner that either donates or accepts electrons. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Solid‐state NMR studies of cis‐1,4‐polyisoprene crosslinked with dicumyl peroxide in the presence of triallyl cyanurate

The network of dicumyl peroxide (DCP)/triallyl cyanurate (TAC) crosslinked cis‐1,4‐polyisoprene was studied by solid‐state NMR techniques such as direct‐polarization (DP), cross‐polarization (CP), and proton T₂ experiments. Line broadening and cis/trans isomerization of mobile carbons were observed in the DP experiments. The information on rigid carbons of network structures was observed with the CP technique. Motional heterogeneity was examined by proton T₂ relaxation experiments. Decreases in long T₂ (T_2L) values from the mobile non‐network structures and short T₂ (T_2S) values from the rigid network structures were observed with an increase in peroxide or coagent concentration. The percentage of T_2S in T₂ relaxation, which is related to network density, was observed to increase with peroxide and coagent addition. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1417–1423, 2000     

Studies on the phase structure of ethylene‐vinyl acetate copolymers by solid‐state 1H and 13C NMR

The phase structure of a series of ethylene‐vinyl acetate copolymers has been investigated by solid‐state wide‐line ¹H NMR and solid‐state high‐resolution ¹³C NMR spectroscopy. Not only the degree of crystallinity but the relative contents of the monoclinic and orthorhombic crystals within the crystalline region varied with the vinyl acetate (VA) content. Biexponential ¹³C NMR spin–lattice relaxation behavior was observed for the crystalline region of all samples. The component with longer ¹³C NMR spin–lattice relaxation time (T₁) was attributed to the internal part of the crystalline region, whereas the component with shorter ¹³C NMR T₁ to the mobile crystalline component was located between the noncrystalline region and the internal part of the crystalline region. The content of the mobile crystalline component relative to the internal part of the crystalline region increased with the VA content, showing that the ¹³C NMR spin–lattice relaxation behavior is closely related to the crystalline structure of the copolymers. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2199–2207, 2002     

Promotion of the γ‐phase of polyamide 6 in its nanocomposite with phosphate glass

The effect of tin fluorophosphate‐glass (Pglass) nanoparticles on the polyamide‐6 (PA6) matrix in Pglass/PA6 hybrids has been investigated by ¹³C solid‐state nuclear magnetic resonance (NMR). The crystallinity determined by direct‐polarization ¹³C NMR combined with longitudinal relaxation‐time (T_1C) filtering varied between 31 and 44%. T_1C‐filtered ¹³C spectra with cross polarization clearly showed resonances of both the α‐ and γ‐crystalline phases of PA6, typically at ratios near 45:55, while the similarly processed neat polymer contained only the α‐phase. This suggests that the Pglass promotes the growth of the γ‐crystalline phase. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 857–860, 2008     

Synthesis of all‐conjugated poly(3‐hexylthiophene)‐block‐ poly(3‐(4′‐(3″,7″‐dimethyloctyloxy)‐3′‐pyridinyl)thiophene) and its blend for photovoltaic applications

New all‐conjugated block copolythiophene, poly(3‐hexylthiophene)‐block‐poly(3‐(4′‐(3″,7″‐dimethyloctyloxy)‐3′‐pyridinyl)thiophene) (P3HT‐b‐P3PyT) was successfully prepared by Grignard metathesis polymerization. The supramolecular interaction between [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester (PCBM) and P3PyT was proposed to control the aggregated size of PCBM and long‐term thermal stability of the photovoltaic cell, as evidenced by differential scanning calorimetry (DSC), transmission electron microscopy (TEM), and optical microscopy. The effect of different solvents on the electronic and optoelectronic properties was studied, including chloroform (CL), dichlorobenzene (DCB), and mixed solvent of CL/DCB. The optimized bulk heterojunction solar cell devices using the P3HT‐b‐P3PyT/PCBM blend showed a power conversion efficiency of 2.12%, comparable to that of P3HT/PCBM device despite the fact that former had a lower crystallinity or absorption coefficient. Furthermore, P3HT‐b‐P3PyT could be also used as a surfactant to enhance the long‐term thermal stability of P3HT/PCBM‐based solar cells by limiting the aggregated size of PCBM. This study represents a new supramolecular approach to design all‐conjugated block copolymers for high‐performance photovoltaic devices. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Correlation study among oxygen permeability,molecular mobility,and amorphous structure change of poly(ethylene‐vinylalcohol copolymers) by moisture

Oxygen permeability and the free‐volume hole size (cavity size) of ethylene‐vinylalcohol copolymers (EVOH) indicate abnormal humidity dependence, that is, they have minimum values in the range of around 20–40% RH, not showing a monotonic increase with humidity. To clarify this abnormal phenomenon, we investigated its molecular mobility and amorphous structure change by means of solid‐state NMR and temperature‐modulated differential scanning calorimetry (TMDSC). The glass transition temperature (T_g) decreased with humidity. Specimens stored at 15–60% RH showed large enthalpy relaxation, and it was found that the amorphous structure became more compact and the molecular conformation became more stable by ageing within this range of humidity. Under these conditions, solid‐state NMR measurement showed a component with intermediate relaxation time in the amorphous region. The results obtained by TMDSC and solid‐state NMR showed a reduction in molecular mobility by densifying in the amorphous region under the condition of 15–60% RH. The fact that the oxygen permeability and the cavity size of EVOH indicate minimum values at low humidity are attributed to the reduction in molecular mobility by enthalpy relaxation. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1181–1191, 2009     

Effect of solvent additives on bulk heterojunction morphology of organic photovoltaics and their impact on device performance

Morphology of the active layer in an organic photovoltaic (OPV) device is known to have a significant impact on the device performance. It is, however, difficult to characterize nanoscale morphologies in detail, especially at the ensemble level. Herein, we report the utilization of small angle neutron scattering (SANS) to investigate variations in the nanoscale morphologies of the active layer of poly(3-hexylthiophene-2,5-diyl):[6,6]-phenyl-C₆₁-butyric acid methyl ester (P3HT:PCBM) bulk heterojunction OPV depending on the composition of casting solvent. Both the power law and the poly hard sphere model were utilized to characterize the state of the donor and acceptor components, respectively, from the obtained SANS data. Furthermore, the relationship between the nanoscale morphology and device performance is outlined. It was found that the use of 2-chlorophenol, a poor solvent for P3HT and, at the same time, a very good solvent for PCBM, leads to nanomorphology featuring ordered, highly crystalline P3HT and small (15.2 nm) PCBM domains. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016, 54, 128–134     

Copolymerization of norbornene with methoxycarbonylnorbornene catalyzed by Ni{CF3C(O)CHC[N(naphthyl)]CH3}2/B(C6F5)3 catalytic system and good processability for Dry/Wet phase inversion and electrospinning technique

Copolymerization of norbornene (NB) with methoxycarbonylnorbornene (NB‐COOCH₃) was carried out with catalytic system of Ni{CF₃C(O)CHC[N(naphthyl)]CH₃}₂ and B(C₆F₅)₃ in toluene. The catalytic system exhibited higher activity 2.69 × 10⁵ (gpolymer/mol Ni h) for copolymerization of norbornene and methoxycarbonylnorbornene. The influence results of the comonomer feed content on the polymerization showed that the NB‐COOCH₃ has a very high insertion ratio in all copolymers, and the NB‐COOCH₃ content in copolymers can be controlled to be 7.9–77.6 mol % at content of 10–90 mol % of the NB‐COOCH₃ in the monomer feeds ratios. The reactivity ratios, r_NB‐COOCH3 = 0.578 and r_NB = 0.859, were determined by the Kelen–TÜdÕs method. Copolymers were processed by solution casting method, dry/wet phase inversion technique, and electrospinning. The films prepared by solution casting method showed good transparency in the visible region. The membranes processed by dry/wet phase inversion technique were microporous structures. The fibers diameters fabricated by electrospinning were about 3 μm. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Investigation of the dynamics of poly(ether sulfone) membrane formation by immersion precipitation

Cast‐leaching experiments were carried out to investigate the dynamics of membrane formation by immersion precipitation, with an emphasis on the outflow of the solvent from casting solutions during the phase‐separation process. The casting solutions, consisting of poly(ether sulfone) as the polymer, N‐methyl‐2‐pyrolidone as the solvent, and water (H₂O), isopropyl alcohol, 1‐butanol, and diethylene glycol as nonsolvent additives (NSAs), were immersed in a coagulation bath. Two thermodynamically vastly different coagulants? H₂O, a strong coagulant, and ethylene glycol, a weak coagulant—were used to study the effect of the coagulant on the dynamics of membrane formation. The results showed that the outflow of the solvent during the initial stage of membrane formation was controlled by Fickian diffusion within the extremely wide range of conditions studied, that is, polymer concentrations of 10–38%, approaching ratios of 0–0.95, and thermodynamically vastly different NSAs and coagulants. The role of the initial state of the membrane‐forming solution, especially the conformational state of macromolecules in the membrane‐forming process, was examined. In contrast to those works on the behavior of small molecules, an attempt was made to qualitatively interpret membrane formation from the viewpoint of macromolecules. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 498–510, 2005     

The morphology and structure of PS‐b‐P4VP block copolymer films by solvent annealing: effect of the solvent parameter

Lamellae (symmetric) forming polystyrene‐b‐poly(4‐vinylpyridine) (PS‐b‐P4VP) block copolymers (BCPs) were used to produce nanostructured thin films by solvent (toluene) casting (spin‐coating) onto silicon substrates. As expected, strong micellization of PS‐P4VP in toluene results in poorly ordered hexagonally structures films. Following deposition the films were solvent annealed in various solvents and mixtures thereof. A range of both morphologies including micelle and microphase separated structures were observed. It was found that nanostructures typical of films of regular thickness (across the substrate) and demonstrating microphase separation occurred only for relatively few solvents and mixtures. The data demonstrate that simple models of solvent annealing based on swelling of the polymer promoting higher polymer chain mobility are not appropriate and more careful rationalization is required to understand these data. Analysis suggests that regular phase separated films can only be achieved when the copolymer Hildebrand solubility parameter is very similar to the value of the solvent. It is suggested that the solvent anneal method used is best considered as a liquid phase technique rather than a vapor phase method. The results show that solvent annealing methods can be a very powerful means to control structure and in some circumstances dominate other factors such as surface chemistry and surface energies. Copyright © 2009 John Wiley & Sons, Ltd.     

Effects of electron irradiation on poly(vinylidene fluoride–trifluoroethylene) copolymers studied by solid‐state nuclear magnetic resonance spectroscopy

The effects of electron irradiation on the molecular chemical structure, conformation, mobility, and phase transition of vinylidene fluoride (VDF) and trifluoroethylene (TrFE) copolymer have been investigated with variable‐temperature, solid‐state ¹⁹F nuclear magnetic resonance (NMR). It has been found that electron irradiation converts all‐trans conformations of both VDF‐rich and TrFE‐containing segments into dynamically mixed trans–gauche conformations accompanied by a simultaneous ferroelectric‐to‐paraelectric (or amorphous) transition. The variable‐temperature ¹⁹F magic‐angle‐spinning spectra results show that the paraelectric phase melts at much lower temperatures in irradiated films than in an unirradiated sample. Moreover, ¹⁹F NMR relaxation data (spin–lattice relaxation times in both the laboratory and rotating frames) reveal that electron irradiation enhances the molecular motion in paraelectric regions, whereas the molecular motion in a high‐temperature amorphous melt (>100 °C) is more constrained in irradiated films. Besides these physical changes, electron irradiation also induces the formation of several CF₃ groups. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1714–1724, 2006     

Versatile and controlled synthesis of resorbable star‐shaped polymers using a spirocyclic tin initiator—Reaction optimization and kinetics

A spirocyclic tin initiator was synthesized from pentaerythritol ethoxylate and dibutyltin oxide and used to polymerize L ‐lactide with dichloromethane, chloroform, toluene, and chlorobenzene as solvents. The reactions were performed at different temperatures and it is concluded that neither the temperature nor the solvent affects the molecular weight or the molecular weight distribution of the star‐shaped polymers. The reaction rate was significantly increased by raising the reaction temperature or choosing a solvent with a low dielectric constant. All polymers showed a molecular‐weight distribution below 1.19 and a molecular‐weight determined by the initial monomer to initiator concentration ([M]₀/[I]). No induction period was seen for the polymerizations. They were all first order in initiator and the degree of aggregation in toluene at 110 °C was found to be 4/5. The glass transition temperature and the melting temperature of the star‐shaped polymers increase with increasing arm length. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 596–605, 2006     

Synthesis and photovoltaic properties of low‐bandgap 4,7‐dithien‐2‐yl‐2,1,3‐benzothiadiazole‐based poly(heteroarylenevinylene)s

Three novel low‐bandgap copolymers containing alkylated 4,7‐dithien‐2‐yl‐2,1,3‐benzothiadiazole (HBT) and different electron‐rich functional groups (dialkylfluorene (PFV‐HBT), dialkyloxyphenylene (PPV‐HBT) and dialkylthiophene (PTV‐HBT)) were prepared by Horner polycondensation reactions and characterized by ¹H NMR, gel permeation chromatography, and elemental analysis. The alkyl side chain brings these polymeric materials good solubility in common organic solvents, which is critical for the manufacture of solar cells in a cost‐effective manner. The copolymers exhibit low optical bandgap from 1.48 to 1.83 eV. The highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) energy levels of the copolymers were measured by cyclic voltammetry. Theoretical calculations revealed that the variation laws of HOMO and the LUMO energy levels are well consistent with cyclic voltammetry measurement. The bulk heterojunction photovoltaic devices with the structure of ITO/PEDOT‐PSS/polymer:PCBM/LiF/Al were fabricated by using the three copolymers as the donor and (6,6)‐phenyl‐C₆₁‐butyric acid methyl ester (PCBM) as the acceptor in the active layer. The device based on PTV‐HBT:PCBM (1:4 w/w) achieved a power conversion efficiency of 1.05% under the illumination of AM 1.5, 100 mW/cm². © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.