Synthesis of totarane diterpenes: totarol, maytenoquinone, 6-deoxymaytenoquinone and 8,11,13-totaratriene-12,13-diol

The syntheses of four totarane diterpenes-totarol, 8,11,13-totaratriene-12,13-diol, 6-deoxymaytenoquinone and maytenoquinone-are described. Totarol was synthesized via cyclization of a modified polyene. 8,11,13-Totaratriene-12,13-diol was prepared from natural totarol by ortho-oxidation with mCBPO (m-chlorobenzoyl peroxide). Maytenoquinone and 6-deoxymaytenoquinone were synthesized from 8,11,13-totaratriene-12,13-diol. 1H-NMR analysis showed that tautomeric isomerization between 6-deoxymaytenoquinone (2-hydroxy-4-quinone methide) and the ortho-quinone was very slow.     

Efficient ortho-oxidation of phenols with diacyl peroxides

A stable symmetric diacyl peroxide, m-chlorobenzoyl peroxide (mCBPO), and an asymmetric diacyl peroxide, chloroacetyl m-chlorobenzoyl peroxide (CAMCBPO), were synthesized from m-chloroperbenzoic acid. Both peroxides oxidized phenols selectively at the ortho position predominantly. CAMCBPO gave para-oxidized compounds as minor products from some phenols. The improvement of the yield of ortho-oxidation of phenols with mCBPO was also reported.     

Studies toward the biomimetic synthesis of tropolone natural products via a hetero Diels-Alder reaction

Analogues of the tropolone natural products pycnidione and epolone B were synthesized via a hetero Diels-Alder reaction of benzotropolone 10 with humulene. The quinone methide benzotropolone 13 was generated in situ by thermalisation of benzotropolone 10. Benzotropolone 10 was derived from phthalic acid via carbonyl ylide 8a followed by an intramolecular 1,3-dipolar cycloaddition and subsequent acid-catalyzed ring opening.     

Flash photolytic generation and study of p-quinone methide in aqueous solution. An estimate of rate and equilibrium constants for heterolysis of the carbon-bromine bond in p-hydroxybenzyl bromide

Flash photolysis of p-hydroxybenzyl acetate in aqueous perchloric acid solution and formic acid, acetic acid, biphosphate ion, and tris(hydroxymethyl)methylammonium ion buffers produced p-quinone methide as a short-lived species that underwent hydration to p-hydroxybenzyl alcohol in hydronium ion catalyzed (k(H(+)) = 5.28 x 10(4) M(-1) s(-1)) and uncatalyzed (k(uc) = 3.33 s(-1)) processes. The inverse nature of the solvent isotope effect on the hydronium ion-catalyzed reaction, k(H(+))/k(D(+)) = 0.41, indicates that this process occurs by rapid and reversible protonation of the quinone methide on its carbonyl carbon atom, followed by rate-determining capture of the p-hydroxybenzyl carbocation so produced by water, while the magnitude of the rate constant on the uncatalyzed process indicates that this reaction occurs by simple nucleophilic addition of water to the methylene group of the quinone methide. p-Quinone methide also underwent hydronium ion-catalyzed and uncatalyzed nucleophilic addition reactions with chloride ion, bromide ion, thiocyanate ion, and thiourea. The solvent isotope effects on the hydronium ion-catalyzed processes again indicate that these reactions occurred by preequilibrium mechanisms involving a p-hydroxybenzyl carbocation intermediate, and assignment of a diffusion-controlled value to the rate constant for reaction of this cation with thiocyanate ion led to K(SH) = 110 M as the acidity constant of oxygen-protonated p-quinone methide. In a certain perchloric acid concentration range, the bromide ion reaction became biphasic, and least-squares analysis of the kinetic data using a double-exponential function provided k(Br(-)) = 3.8 x 10(8) M(-1) s(-1) as the rate constant for nucleophilic capture of the p-hydroxybenzyl carbocation by bromide ion, k(ionz) = 8.5 x 10(2) s(-1) for ionization of the carbon-bromine bond of p-hydroxybenzyl bromide, and K = 4.5 x 10(5) M(-1) as the equilibrium constant for the carbocation-bromide ion combination reaction, all in aqueous solution at 25 degrees C. Comparisons are made of the reactivity of p-quinone methide with p-quinone alpha,alpha-bis(trifluoromethyl)methide as well as p-quinone methide with o-quinone methide.     

Kinetics and mechanism of hydration of o-thioquinone methide in aqueous solution. Rate-determining protonation of sulfur

o-Thioquinone methide, 2, was generated in aqueous solution by flash photolysis of benzothiete, 1, and rates of hydration of this quinone methide to o-mercaptobenzyl alcohol, 3, were measured in perchloric acid solutions, using H2O and D2O as the solvent, and also in acetic acid and tris(hydroxymethyl)methylammonium ion buffers, using H2O as the solvent. The rate profiles constructed from these data show hydronium-ion-catalyzed and uncatalyzed hydration reaction regions, just like the rate profiles based on literature data for hydration of the oxygen analogue, o-quinone methide, of the presently examined substrate. Solvent isotope effects on hydronium-ion catalysis of hydration for the two substrates, however, are quite different: k(H)/k(D) = 0.42 for the oxygen quinone methide, whereas k(H)/k(D) = 1.66 for the sulfur substrate. The inverse nature (k(H)/k(D) < 1) of the isotope effect in the oxygen system indicates that this reaction occurs by a preequilibrium proton-transfer reaction mechanism, with protonation of the substrate on its oxygen atom being fast and reversible and capture of the benzyl-type carbocationic intermediate so formed being rate-determining. The normal direction (k(H)/k(D) > 1) of the isotope effect in the sulfur system, on the other hand, suggests that protonation of the substrate on its sulfur atom is in this case rate-determining, with carbocation capture a fast following step. A semiquantitative argument supporting this hypothesis is presented.     

Antioxidant activity and mechanism of the abietane-type diterpene ferruginol

The antioxidant activity of the abietane-type diterpene ferruginol was evaluated by comparison with that of carnosic acid, ( ± )-α-tocopherol and dibutylhydroxytoluene using 2,2-diphenyl-1-picrylhydrazyl, β-carotene bleaching and linoleic acid assays. Ferruginol had the lowest antioxidant activity of this group using the 2,2-diphenyl-1-picrylhydrazyl and β-carotene methods in polar solvent buffer. However, ferruginol exhibited stronger activity than carnosic acid and α-tocopherol for linoleic acid oxidation under non-solvent conditions. Five peaks corresponding to ferruginol derivatives were detected through GC-MS analysis of the reaction between ferruginol and methyl linoleate. The three reaction products were identified as dehydroferruginol, 7β-hydroxyferruginol and sugiol, and the other two peaks were assumed to be 7α-hydroxyferruginol and the quinone methide derivative of ferruginol. The time course of the reaction suggests that the quinone methide was produced early in the reaction and reacted further to produce dehydroferruginol, 7-hydroxyferruginol and sugiol. Thus, we inferred that quinone methide formation was a key step in the antioxidant reaction of ferruginol.     

A two-step biomimetic synthesis of antimalarial robustadials A and B

The antimalarial robustadials A and B have been synthesized in two steps starting from commercially available phloroglucinol comprising a key biomimetic three-component reaction that involves in situ generation of an o-quinone methide via Knoevenagel condensation and subsequent Diels-Alder cycloaddition with (−)-β-pinene.     

Flash photolytic generation of ortho-quinone methide in aqueous solution and study of its chemistry in that medium

Flash photolysis of o-hydroxybenzyl alcohol, o-hydroxybenzyl p-cyanophenyl ether, and (o-hydroxybenzyl)trimethylammonium iodide in aqueous perchloric acid and sodium hydroxide solutions, and in acetic acid and biphosphate ion buffers, produced o-quinone methide as a short-lived transient species that underwent hydration back to benzyl alcohol in hydrogen-ion catalyzed (k(H+) = 8.4 x 10(5) M(-1) s(-1)) and hydroxide-ion catalyzed (k(HO)- = 3.0 x 10(4) M(-1) s(-1)) reactions as well as an uncatalyzed (k(UC) = 2.6 x 10(2) s(-1)) process. The hydrogen-ion catalyzed reaction gave the solvent isotope effect k(H+)/k(D)+ = 0.42, whose inverse nature indicates that this process occurs by rapid and reversible equilibrium protonation of the carbonyl oxygen atom of the quinone methide, followed by rate-determining capture of the carbocation so produced by water. The magnitude of the rate constant of the uncatalyzed reaction, on the other hand, indicates that this process occurs by simple nucleophilic addition of water to the methylene group of the quinone methide. Decay of the quinone methide is also accelerated by acetic acid buffers through both acid- and base-catalyzed pathways, and quantitative analysis of the reaction products formed in these solutions shows that this acceleration is caused by nucleophilic reactions of acetate ion rather than by acetate ion assisted hydration. Bromide and thiocyanate ions also accelerate decay of the quinone methide through both hydrogen-ion catalyzed and uncatalyzed pathways, and the inverse nature of solvent isotope effects on the hydrogen-ion catalyzed reactions shows that these reactions also occur by rapid equilibrium protonation of the quinone methide carbonyl oxygen followed by rate-determining nucleophilic capture of the ensuing carbocation. Assignment of an encounter-controlled value to the rate constant for the rate-determining step of the thiocyanate reaction leads to pK(a) = -1.7 for the acidity constant of the carbonyl-protonated quinone methide.     

Synthesis of new p-quinone methide containing morpholine fragment: access to (diarylmethyl)phosphonamidates with antitumor activity

Novel (diarylmethyl)phosphonamidates containing 2,6-di-tert-butylphenol and heterocycle moieties were synthesized by 1,6-conjugate addition of phosphorylated p-quinone methide with morpholine fragment to 2,6-diaminopyridine or 1,3-diaminobenzene. In the case of an acid-catalyzed reaction of p-quinone methide with sesamol, morpholine was cleaved to form 1,2-benzoxaphosphole substituent. Cytotoxic effects of starting compounds and obtained products were evaluated towards human cancer and normal cells.     

Synthesis and structure of tris(3-methylphenyl)bismuth bis(3,4-dimethylbenzenesulfonate)

Tris(3-methylphenyl)bismuth bis(3,4-dimethylbenzenesulfonate) has been synthesized via the reaction of tris(3-methylphenyl)bismuth, 3,4-dimethylbenzenesulfonic acid, and hydrogen peroxide (1: 2: 1) in diethyl ether. Bismuth atoms in the product molecule have the trigonal bipyramidal coordination with arenesulfonate substituting groups in the axial positions.     

Alkylation of guanosine and 2'-deoxyguanosine by o-quinone alpha-(p-anisyl)methide in aqueous solution

Rates of alkylation of guanosine and 2'-deoxyguanosine with o-quinone alpha-(p-anisyl)methide were measured by flash photolysis in a series of aqueous sodium hydroxide solutions and bicarbonate ion, t-butylhydrogenphosphonate ion, and biphosphate ion buffers. The data so obtained provide rate profiles for these nucleoside plus quinone methide reactions over the range pH = 7-14, which furnish guanosine and deoxyguanosine acidity constants consistent with literature information. These profiles also provide rate constants that show the reaction of o-quinone alpha-(p-anisyl)methide with guanosine and deoxyguanosine to be fairly fast processes, considerably faster than the biologically wasteful reaction of the quinone methide with water, which is the ubiquitous medium in biological systems; that makes the quinone methide a potent guonosine and deoxyguanosine alkylator.     

Biomimetic cycloaddition approach to tropolone natural products via a tropolone ortho-quinone methide

[reaction: see text] A study toward a possible biomimetic hetero Diels-Alder reaction is reported between humulene and a novel tropolone ortho-quinone methide. A suitable tropolone ortho-quinone methide precursor has been prepared from 3-methyl-2-furoate. Heating the ortho-quinone methide precursor gave a tropolone ortho-quinone methide, which in the presence of humulene underwent a hetero Diels-Alder reaction to give a deoxy analogue of epolone B.     

Quinone methide phosphodiester alkylations under aqueous conditions

A detailed analysis of the alkylation of phosphodiesters with a p-quinone methide under aqueous conditions has been accomplished. The relative rates of phosphodiester alkylation and hydrolysis have been examined by (1)H NMR analysis of the reaction of 2,6-dimethyl-p-quinone methide in a buffered diethyl phosphate/acetonitrile solution (1:9 v/v, pH 4.0). The rate of hydrolysis of the quinone methide was confirmed by UV analysis in 28.5% solutions of aqueous inorganic phosphate in acetonitrile at pH 4.0 and 7.0. Similarly, the rate of phosphodiester alkylations by the quinone methide was also confirmed by UV analysis in 28.5% solutions of aqueous dibenzyl, dibutyl, or diethyl phosphate in acetonitrile at pH 4.0 and 7.0. These kinetic studies further establish that the phosphodiester alkylation reactions are acid-catalyzed, second-order processes. The rate constant for phosphodiester alkylation was found to range from approximately 370-3700 times the rate constant of quinone methide hydrolysis with diethyl and dibenzyl phosphate, respectively (pH 4.0, 28.5% aqueous acetonitrile).     

Polymerization of 7-phenyl-2,6-dimethylquinone methide and its derivatives

7-Phenyl-, 7-chlorophenyl-,7-methylphenyl-, and 7-trifluoromethylphenylquinone methide were synthesized to investigate the anionic polymerization of quinone methide. Novel high molecular weight polymers have been prepared and the substitution effects of the monomers on polymerization kinetics were determined. © 1993 John Wiley & Sons, Inc.     

Influence of Oxidation Conditions on the Yield of 2-Substituted Imidazole-4,5-dicarboxylic Acids

Conditions were found which allow 2-alkyl-substituted imidazole-4,5-dicarboxylic acids to be synthesized in preparative quantities by the oxidation of 2-alkylbenzimidazoles with hydrogen peroxide. It was shown that optimal results can be obtained at the concentration of 2-alkylimidazole in sulfuric acid of 1 M and the hydrogen peroxide: 2-alkylbenzimidazole molar ratio of 11: 1. Oxidation under these conditions results in higher yields of the target 2-alkylimidazole-4,5-dicarboxylic acids, including those with a branched alkyl group.     

可生物降解聚酯的合成和交联产物性质研究(英)

由丙三醇、丙交酯和反丁烯二酸制得一含碳碳双健的低分子量聚酯。该聚酯由于存在不饱和键,可热引发或引发剂引发交联,可望成为环境友好材料或生物降解复合材料领域的一个有用的热固性树脂。     

Castor oil modified by epoxidation,transesterification, and acrylation processes: Spectroscopic characteristics

In the present study, castor oil (CO) was modified by epoxidation, transesterification, and acrylation processes. In situ epoxidation method was used to prepare epoxidized castor oil (ECO) in acetic acid with hydrogen peroxide in the presence of Seralite SRC-120 catalyst. Transesterified epoxidized castor oil was synthesized from the reaction of methanol in the presence of sodium methoxide catalyst. The acrylated epoxidized castor oil was synthesized from the reaction of ECO with acrylic acid containing hydroquinone. Chemical structures of modified CO were analyzed by Fourier transform infrared spectroscopy and proton nuclear magnetic resonance spectra analysis.     

氮、铁共掺杂碳纳米粒子的制备及在过氧化氢和葡萄糖检测中的应用

以L-酒石酸和一水柠檬酸为混合碳源,以乙二胺为氮源和聚合试剂,并添加六水三氯化铁,通过一锅溶剂热法合成了氮、铁共掺杂碳纳米粒子(N/Fe-CNPs),采用制备的N/Fe-CNPs模拟过氧化物酶催化过氧化氢(H₂O₂)氧化3,3',5,5'-四甲基 产生可溶性的蓝色产物,联合葡萄糖氧化酶建立了测定H₂O₂和葡萄糖含量的新方法。 结果显示:H₂O₂及葡萄糖的浓度与反应体系的吸光度呈良好的线性关系,H₂O₂的线性范围为0.2~20 μmol/L,葡萄糖的线性范围为0.1~1.0及1.0~80 μmol/L,最低检出限分别可达42.5和76.1 nmol/L。     

3-取代和3,4-二取代噻吩的合成与表征

以噻吩、48% (m/m)氢溴酸水溶液、35% (m/m)过氧化氢水溶液、高纯氨、金属钠为原料合成了3-溴噻吩和3,4-二溴噻吩,3-溴噻吩和3,4-二溴噻吩分别以(dppp)NiCl2为催化剂合成了3-烷基噻吩和3,4-二烷基噻吩.3-溴噻吩以CuI, NaHSO4为催化剂合成了3-烷氧基噻吩,产率较高.并用核磁共振谱、质谱和元素分析方法进行了表征.     

多壁碳纳米管表面过氧化苯甲酰印迹复合材料的制备及固相萃取应用

以过氧化苯甲酰(BOP)为模板分子,甲基丙烯酸(MAA)为功能单体,乙二醇二甲基丙烯酸酯(EGDMA)为交联剂,偶氮二异丁腈(AIBN)为引发剂,采用热聚合法在多壁碳纳米管(MWNTs)表面制备印迹聚合物(MWNTs-MIPs)。采用红外和热重分析等技术对聚合物结构进行表征。采用液相色谱考察该分子印迹聚合物对过氧化苯甲酰的吸附特性。结果表明该印迹聚合物对过氧化苯甲酰表现出特异性吸附,该印迹聚合物对模板分子存在一种结合位点,其最大表观结合量为56.20 µmol/g。该印迹聚合物成功应用于固相萃取富集面粉中微量过氧化苯甲酰,浓度富集因子为526。