Preparation and HPLC application of chiral stationary phase from 4‐tert‐butylphenylcarbamates of cellulose and amylose immobilized onto silica gel

The 4‐tert‐butylphenylcarbamates of cellulose and amylose bearing a small amount of 3‐(triethoxysilyl)propyl residues were synthesized by a one‐pot process and efficiently immobilized onto a silica gel through intermolecular polycondensation of the triethoxysilyl groups. The obtained chiral packing materials (CPMs) were evaluated by HPLC. The polysaccharide derivatives containing about 1–2% of the 3‐(triethoxysilyl)propyl residue were efficiently immobilized with a high chiral recognition ability. The immobilized CPMs could be used with the eluents containing chloroform and tetrahydrofuran (THF), which cannot be used with the conventional coated‐type CPMs. By using these eluents, the chiral recognition for many racemates was improved.     

Immobilization of polysaccharide derivatives onto silica gel Facile synthesis of chiral packing materials by means of intermolecular polycondensation of triethoxysilyl groups

The 3,5-dimethylphenylcarbamates of cellulose and amylose bearing a small amount of 3-(triethoxysilyl)propyl residues were synthesized by a simple process and efficiently immobilized onto a silica gel support by intermolecular polycondensation of the triethoxysilyl groups. The obtained chiral packing materials (CPMs) were evaluated by high-performance liquid chromatography. The polysaccharide derivatives containing about 1-2% of the 3-(triethoxysilyl)propyl residue were efficiently immobilized with a high chiral recognition. The immobilized CPMs could be used with the eluents containing chloroform and tetrahydrofuran, which cannot be used with the conventional coated-type CPMs. By using these eluents, the chiral recognitions for many racemates could be improved.     

Immobilization of 3,5‐dimethylphenylcarbamates of cellulose and amylose onto silica gel using (3‐glycidoxypropyl)triethoxysilane as linker

The 3,5‐dimethylphenylcarbamates of cellulose and amylose were effectively immobilized onto plain silica gels as chiral packing materials (CPMs) for HPLC by means of intermolecular polycondensation of triethoxysilyl groups introduced with (3‐glycidoxypropyl)triethoxysilane. The immobilization and chiral recognition abilities of the obtained CPMs prepared with different amounts of (3‐glycidoxypropyl)triethoxysilane were investigated. In addition, the solvent compatibilities of the immobilized‐type CPMs were examined with eluents containing chloroform and THF. When these eluents were used, for most of the tested racemates, the chiral resolving abilities of the obtained CPMs were improved.     

Immobilization of cellulose phenylcarbamate onto silica gel via in termolecular polycondensation of triethoxysilyl groups introduced with (3-glycidoxypropyl)triethoxysilane

Cellulose 3,5-dimethylphenylcarbamate was successfully immobilized onto bare silica gel for HPLC through the intermolecular polycondensation of triethoxysilyl groups, which were introduced onto the cellulose derivative via epoxide ring-opening reaction under acidic conditions. The immobilized-type chiral packing material (CPM) exhibited high chiral recognition ability and could be used with various eluents, which are incompatible with the conventional CPMs prepared by coating the derivative onto silica gel.     

几种手性醇在纤维素键合的SBA-15基手性固定相上的直接拆分

在强酸性条件下, 以三嵌段聚醚P123为模板, 合成了孔径大且粒径均匀的SBA-15介孔二氧化硅微球. 将含有少量三乙氧硅丙基氨基甲酸酯残基的纤维素-三(3,5-二甲基苯基氨基甲酸酯)通过分子间缩聚作用固载到氨丙基化的SBA-15微球上, 制得手性固定相; 采用常规和非常规的流动相模式, 对一些芳香醇的消旋体进行了手性拆分. 实验结果表明, 所制备的SBA-15微球不仅分散性良好, 具有规则的二维六方孔道结构, 而且消除了微孔; 所制备的键合手性固定相不仅固载手性选择剂的量大, 而且经六甲基二硅胺烷封端后可有效改善拖尾现象, 对实验选用的手性醇具有较高的拆分能力; 与大孔硅胶为基质的同类纤维素键合手性固定相相比, 该固定相对同种手性消旋体的分离因子明显提高.     

Preparation and chiral recognition ability of crosslinked beads of polysaccharide derivatives

The spherical beads consisting of cellulose 3,5-dimethylphenylcarbamate with partial hydroxyl groups were prepared to be used as chiral packing materials (CPMs) for HPLC. The beads were obtained without using macroporous silica gel, which is usually used as the support of the CPMs based on the polysaccharide derivatives. After the crosslinking in the bead with diisocyanates, such as 4,4'-diphenylmethane diisocyanate (MDI), 4,4'-dibenzyl diisocyanate (DBDI), tolylene-2,4-diisocyanate (TDI), and m-xylylene diisocyanate (XDI), the obtained beads were packed into an HPLC column. As the content of the hydroxyl groups of the cellulose derivatives decreased, the obtained CPM exhibited a higher chiral recognition ability. The beads possessed a higher loading capacity than the CPM prepared by coating the cellulose derivative on silica gel. The crosslinked beads could be used with the eluent containing chloroform. The amylose derivative beads were also prepared as a CPM for chiral HPLC.     

Improved preparation of chiral stationary phases via immobilization of polysaccharide derivative‐based selectors using diisocyanates

The classical method for the preparation of immobilized polysaccharide‐based chiral stationary phases (CSPs) with a diisocyanate was improved. Cellulose or amylose was directly coated onto 3‐aminopropyl silica gel after it was dissolved in a mixture of N,N‐dimethylacetamide, LiCl, and pyridine, then immobilized onto silica gel with a diisocyanate, and finally allowed to react with an excess of corresponding isocyanate. Four polysaccharide derivatives, 3,5‐dimethylphenylcarbamate and 3,5‐dichlorophenylcarbamate of cellulose, and 3,5‐dimethylphenylcarbamate and 5‐chloro‐2‐methylphenylcarbamate of amylose, were immobilized onto silica gel utilizing this method. Compared with the classical diisocyanate method, the improved procedure avoided the derivatization and regeneration of 6‐hydroxyl groups of cellulose and amylose, and thus showed an advantage for simple and economical preparation. The relationships among the amount of diisocyanate used, immobilization efficiency, and enantioseparation on the cellulose‐based CSPs were investigated. Also, the solvent durability of the obtained CSPs was examined with eluents containing chloroform or THF. By utilizing these eluents, the chiral recognition abilities of the obtained CSPs for some of the tested racemates were improved.     

Preparation and chromatographic evaluation of β-cyclodextrin derivative CSPs bearing substituted phenylcarbamate groups for HPLC

Five β-cyclodextrin (β-CD) derivatives bearing substituted phenylcarbamate/3-(triethoxysilyl)propylcarbamate groups at the 2-, 3-, and 6-positions of glucose unit and another five derivatives containing benzoate at the 2-position and substituted phenylcarbamate/3-(triethoxysilyl)propylcarbamate groups at the 3- and 6-positions were synthesized using the regioselective esterification method. The obtained β-CD derivatives were efficiently immobilized onto the silica gel through the intermolecular polycondensation of a small amount of the triethoxysilyl groups, which were used as the chiral stationary phases (CSPs) for high-performance liquid chromatography (HPLC). The chiral separation properties of these CSPs were evaluated under the normal-phase HPLC. The effects of solvent polarity and the side chain structures of β-CD derivatives on the chiral recognition ability of the immobilized CSPs were investigated. Among these β-CD derivative CSPs, 2,3,6-tris(3,5-dichlorophenylcarbamate)-β-CD CSP showed a relatively high chiral recognition ability for the studied racemates. The regioselective esterification at the 2-position of glucose unit in the β-CD decreased the chiral recognition ability at the same conditions. For some racemates, the β-CD derivative CSPs showed chiral recognition abilities comparable or better to some chemical bonded β-CD derivative CSPs and 3,5-dichloro- and 3,5-dimethylphenylcarbamates of cellulose and amylose CSPs.     

Enantioselectivity of monolithic silica stationary phases immobilized with different concentrations cellulose tris (3,5-dimethylphenylcarbamate), analyzed with different mobile phases in capillary electrochromatography

The 3,5-dimethylphenylcarbamate derivatives of cellulose bearing 3-(triethoxysilyl)propyl residues were immobilized in a capillary format onto a monolithic silica support by intermolecular polycondensation of the triethoxysilyl groups. The resulting columns were used for chiral separations using capillary electrochromatography. The effects of the synthesizing solvent, the selector coating procedure, the chiral selector concentration onto the silica monolith and the mobile phase pH value, on the separation of enantiomers were studied. The column-to-column reproducibility and stability also were evaluated. A test set of 14 chiral substances, including acidic, neutral, bifunctional and basic compounds, was used to investigate the effects of the factors mentioned above. Twelve pairs of enantiomers showed enantioselectivity at some of the different conditions tested. The column-to-column repeatability was satisfactory, and the prepared columns were stable under the adopted analysis conditions.     

多糖类氨基甲酸酯衍生物的区域选择性合成及其手性识别

通过糖单元6-位羟基的保护和去保护,运用区域选择性方法合成了6种新型多糖类氨基甲酸酯衍生物,分别为纤维素/直链淀粉-[2,3-二(3,5-二甲基苯基)-6-环己基]氨基甲酸酯、[2,3-二(3,5-二氯苯基)-6-环己基]氨基甲酸酯及[2,3-二(4-氯苯基)-6-环己基]氨基甲酸酯,并将其涂敷在氨丙基硅胶的表面制备HPLC手性固定相.利用1H-NMR与FTIR光谱技术对所合成衍生物进行结构表征和分析,并应用HPLC法评价其对于9种手性化合物的手性识别能力.通过与以手性识别能力高而著称且含有单一取代基的纤维素/直链淀粉-三(3,5-二甲基苯基氨基甲酸酯)等手性固定相的对比分析表明,所合成新型手性固定相对于某些对映体显示出更优的手性识别能力.由进一步分析表明,糖单元2-、3-和6-位取代基的性能对于纤维素和直链淀粉氨基甲酸酯类衍生物的手性识别能力均具有较大影响.     

A novel chiral mesoporous binaphthyl-silicas: Preparation, characterization, and application in HPLC

Mesoporous organosilicas with both R-(+)-1,1'-binaphthyl-2,2'-diamine and ethane moieties bridging in the framework were synthesized. This mesoporous material was prepared via the one-step co-condensation of N,N'-bis-[(triethoxysilyl)propyl]-(R)-bis-(ureido)-binaphthyl (Si-DABN) with 1,2-bis(triethoxysilyl)ethane (BTSE) using octadecyltrimethylammonium chloride (C(18) TMACl) as a structural directing agent with the aid of a co-solvent (ethanol) in basic medium. The morphology of these bifunctionalized mesoporous organosilicas is sensitive to the Si-DABN mole fraction and the base concentration. And the mesostructure becomes less ordered as the mole fraction of Si-DABN in the initial mixture increases from 10 to 40%. Elemental analysis and Fourier transform infrared (FT-IR) spectrometer indicate that the binaphthyl diamine was successfully introduced to the mesoporous organosilicas. Acidic conditions are more suitable than basic ones for the hydrolysis and condensation of (R)-2,2'-dicyanomethoxy-6,6'-di[(2-triethoxysilyl)ethenyl]-1,1'-binaphthyl, a chiral silane precursors with a short silane side chain on the binaphthyl group. A column packed with these bifunctionalized mesoporous organosilica spheres exhibits greater selectivity for R/S-1,1'-bi-2,2'-naphthol than one packed with commercial SiO(2) grafted with N,N'-bis-[(triethoxysilyl)propyl]-(R)-bis-(ureido)-binaphthyl. Binaphthol and bromosubstituted binaphthol were fully resolved, but two ether derivatives were only partially enantioseparated and the other three ester derivatives were no fully resolved on the column via co-condensation method.     

Immobilized polysaccharide derivatives: chiral packing materials for efficient HPLC resolution

Polysaccharide-based chiral packing materials (CPMs) for high-performance liquid chromatography have frequently been used not only to determine the enantiomeric excess of chiral compounds but also to preparatively resolve a wide range of racemates. However, these CPMs can be used with only a limited number of solvents as mobile phases because some organic solvents, such as tetrahydrofuran, chloroform, and so on, dissolve or swell the polysaccharide derivatives coated on a support, e.g., silica gel, and destroy their packed columns. The limitation of mobile phase selection is sometimes a serious problem for the efficient analytical and preparative resolution of enantiomers. This defect can be resolved by the immobilization of the polysaccharide derivatives onto silica gel. Efficient immobilizations have been attained through the radical copolymerization of the polysaccharide derivatives bearing small amounts of polymerizable residues and also through the polycondensation of the polysaccharide derivatives containing a few percent of 3-(triethoxysilyl)propyl residue.     

Phenylcarbamate derivatives of cellulose and amylose immobilized onto silica gel as chiral stationary phases for high-performance liquid chromatography

Three polysaccharide phenylcarbamate derivatives [cellulose 2,3-bis(3,5-dimethylphenylcarbamate)-6-(3,5-dimethylphenylcarbamate)/(2-methacryloyloxyethylcarbamate), cellulose 2,3-bis(3,5-dichlorophenylcarbamate)-6-(3,5-dichlorophenylcarbamate)/(2-methacryloyloxyethylcarbamate), and amylose 2,3-bis(3, 5-dimethylphenylcarbamate)-6-(3,5-dimethylphenylcarbamate)/(2-methacryloyloxyethylcarbamate)] with vinyl groups were prepared and coated onto silica gel to immobilize them via radical copolymerization with 2,3-dimethylbutadiene. The copolymerization efficiently proceeded, and the coated polysaccharide derivatives were mostly immobilized on the surface of the silica gel. The immobilized polysaccharide derivatives showed high chiral recognition abilities similar to those of the corresponding coated polysaccharide derivatives. They could be used with an eluent containing chloroform, which dissolved the polysaccharide derivatives. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4704–4710, 2004     

One-pot synthesis of polysaccharide 3,5-dimethylphenylcarbamates having a random vinyl group for immobilization on silica gel as chiral stationary phases

Different kinds of vinyl groups were randomly introduced onto the glucose units of cellulose 3,5-dimethylphenylcarbamates by a one-pot method using the bifunctional reagents dec-1-ene-10-isocyanate, 2-isocyanatoethyl methacrylate, and methacryloyl chloride. The chiral recognition properties of the prepared derivatives were then evaluated by coating and immobilizing them on silica gel as HPLC packing material. Immobilization was carried out by radical copolymerization with a vinyl comonomer, 1,5-hexadiene, in toluene at 80 degrees C. The effects of the structures and content of the vinyl groups on the immobilization and on enantioseparations were investigated. This one-pot method was also extended to the synthesis of amylose 3,5-dimethylphenylcarbamates having a random vinyl group. Comparisons of the chiral resolution powers of our laboratory-made packing materials and the newly commercialized Chiralpak IA with immobilized amylose 3,5-dimethylphenylcarbamate and Chiralpak IB with immobilized cellulose 3,5-dimethylphenylcarbamate are discussed.     

Enantioseparation of selected chiral sulfoxides using polysaccharide-type chiral stationary phases and polar organic, polar aqueous-organic and normal-phase eluents

HPLC enantioseparation of selected chiral sulfoxides was studied using cellulose and amylose phenylcarbamate derivatives as chiral stationary phases (CSPs). The contributions of various functional groups of a chiral analyte as well as the polysaccharide derivatives in the analyte retention and chiral recognition were evaluated. A very high enantioseparation factor exceeding 110 was observed in the enantioseparation of 2-(benzylsulfinyl)benzamide (BSBA) on cellulose tris(3,5-dichlorophenylcarbamate) (CDCPC) CSP by using 2-propanol as a mobile phase. The enantiomer elution order was opposite on cellulose and amylose phenylcarbamates. For the polysaccharide-type CSPs, pure alcohols such as methanol, ethanol and 2-propanol represent a valuable alternative to more common alcohol-hydrocarbon and reversed-phase eluents.     

Preparation and chiral recognition ability of cellulose 3,5-dimethylphenylcarbamate immobilized on silica gel through radical polymerization

Polysaccharide-immobilized chiral stationary phases (CSPs) were prepared by the polymerization of cellulose 3,5-dimethylphenylcarbamate, having a polymerizable vinyl group, such as 4-vinylphenylcarbamate or 2-methacryloyloxyethylcarbamate, at the 6-position, with a vinyl monomer, such as styrene, isoprene, t-butyl acrylate, or t-butyl methacrylate, on silica gel under various conditions. Their chiral recognition abilities were then evaluated with high-performance liquid chromatography. The immobilized cellulose 3,5-dimethylphenylcarbamate remained on the silica gel even if washed with tetrahydrofuran, which could dissolve the cellulose derivative. The chiral recognition abilities of the immobilized CSPs were similar to those of the coated CSPs when the vinyl monomer content was low. The chiral recognition abilities of the obtained immobilized CSPs slightly depended on the vinyl monomers. The immobilization of the cellulose derivatives was more efficiently attained on the silica gel modified with a vinyl compound. The cellulose derivatives, randomly having a vinyl group at the 2-, 3-, or 6-position of the glucose unit, were prepared by a one-pot reaction. The immobilization efficiency of these derivatives was slightly lower than that of the derivative with the vinyl group at the 6-position. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3703–3712, 2003     

Novel silica-based hybrid materials incorporating binaphthyl units: a chiral matrix effect in heterogeneous asymmetric catalysis

Polysilsesquioxane hybrid materials containing chiral binaphthyl moieties are readily available by coupling (R)- or (S)-2,2′-dihydroxy-1,1′-binaphthyl (BINOL) with 3-(triethoxysilyl)propyl isocyanate and subsequent hydrolysis polycondensation of the resulting bis-trialkoxysilylated carbamate precursor. Rhodium species were embedded in the chiral hybrid matrix. The catalytic properties of the solids were evaluated in hydride-transfer reduction to prochiral ketones. When the catalytic species were embedded in an entirely chiral network, enantiomeric excesses up to 45% were observed.     

Exploring solvent versatility in immobilized cellulose-based chiral stationary phase for the enantioselective liquid chromatographic resolution of racemates

Chiralpak IB, a new chiral stationary phase (CSP) containing cellulose tris(3,5-dimethylphenylcarabamate) immobilized onto silica gel, is investigated for the direct enantioselective separation of a set of racemic N-alkylated barbiturates and analogs of thalidomide alkylated in position 3 of the piperidin-2,6-dione ring using different nonstandard solvents such as dichloromethane (DCM), ethyl acetate, THF, methyl tert-butyl ether as an eluent and diluent, respectively, in HPLC. The separation, resolution, and elution order of the investigated compounds were compared on both immobilized and coated cellulose tris(3,5-dimethylphenylcarbamate) CSPs (Chiralpak IB and Chiralcel OD, respectively) using a mixture of n-hexane/2-propanol (90:10 v/v) as mobile phase with different flow-rates and fixed UV detection at 254 nm. The effect of the immobilization of the cellulose tris-(3,5-dimethylphenylcarbamate) CSP on silica (Chiralpak IB) on the chiral recognition ability was noted as the coated phase (Chiralcel OD) possesses a higher resolving power in some cases than the immobilized one (Chiralpak IB). However, a few racemates, which were not or poorly resolved on the immobilized Chiralpak IB or the coated Chiralcel OD when using standard solvents were most efficiently resolved on the immobilized Chiralpak IB upon using nonstandard solvents. Furthermore, the immobilized phase withstands the nonstandard (prohibited) HPLC solvents mentioned previously when used as eluents or as a dissolving agent for the analyte itself. An example of inversion or apparent inversion of elution order on Chiralpak IB is reported. The direct analysis of a spiked plasma sample extracted using DCM on Chiralpak IB is also shown.     

Preparation of HPLC chiral packing materials using cellulose tris(4-methylbenzoate) for the separation of chrysanthemate isomers

We investigated the separation of chrysanthemate isomers ( 1 ), particularly the (1R)-trans form, by high-performance liquid chromatography (HPLC) using polysaccharide derivatives, such as the phenylcarbamates and benzoates of cellulose and amylose, as the chiral stationary phases (CSPs). The chiral packing materials (CPMs) having a high chiral recognition for the chrysanthemic acid ethyl ester ( 1a ) were prepared by coating cellulose tris(4-methylbenzoate) ( 2a ) dissolved in solvents containing methyl benzoate or acetophenone as an additive on silica gel. The separation factor for 1a significantly depended on the preparation conditions of CPM 2a , such as the coating amount of 2a and the type and amount of additives. The chiral recognition ability created by imprinting the additives was lost when the CPM was heated at a high temperature, and was recovered by contacting it with the additive in a packed column. The structural change in 2a during these treatments was not clearly detected by spectroscopic methods. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5087–5097, 2006     

Partial Carbamoylation of Cellulose Microspheres:a New Method to Prepare Adsorbents for Liquid Chromatography简

Micron-sized cellulose microspheres were prepared through sol-gel method using NaOH/urea solution to dissolve cellulose, then cross-linked by 1,6-hexanylene diisocyanate （HDI）, toluene 2,4-diisocyanate （TDI） and 1,4-phenylene diisocyanate （PDI）, respectively. The reaction conditions for partial modification of the microspheres were studied. The degree of substitution （DS） in cellulose was controlled by adjusting the reaction conditions. HDI-crosslinked microspheres were partially modified with phenyl isocyanate to obtain chiral stationary phases （CSPs）. The CSPs of a lower degree of crosslinking （DC） showed better chiral recognition ability than those of a higher DC. Meanwhile the CSPs prepared by pre- modification exhibited better chiral recognition ability than those prepared by pre-crosslinking.