Taylor dispersion analysis of metallic-based nanoparticles – A short review

Taylor dispersion analysis (TDA) is an interesting tool for nanoparticle (NP) size determination, feasible using simple capillary electrophoresis apparatus. Based upon the radial diffusion of analytes upon a laminar stream, the diffusion coefficient of species is easily estimable. Moreover, TDA is generally more adequate than conventional dynamic light scattering methodologies as it is less dependent on the polydispersity of the sample, leading to accurate measurement and reliable results. This review provides every paper mentioning the use of TDA for metallic-based NPs size determination. Diverse strategies for the detection of metallic NPs (like UV–visible and inductively coupled plasma–mass spectrometry – ICP–MS – for instance) and interpretation of the Taylorgrams are discussed. Based upon the literature, advices on future prospects are also indicated, especially for the comparison of TDA results with other classical techniques.     

Close‐Packed Two‐Dimensional Silver Nanoparticle Arrays: Quadrupolar and Dipolar Surface Plasmon Resonance Coupling

Silver nanoparticles (NPs) ranging in size from 40 to 100 nm were prepared in high yield by using an improved seed‐mediated method. The homogeneous Ag NPs were used as building blocks for 2D assembled Ag NP arrays by using an oil/water interface. A close‐packed 2D array of Ag NPs was fabricated by using packing molecules (3‐mercaptopropyltrimethoxysilane) to control the interparticle spacing. The homogeneous 2D Ag NP array exhibited a strong quadrupolar cooperative plasmon mode resonance and a dipolar red‐shift relative to individual Ag NPs suspended in solution. A well‐arranged 2D Ag NP array was embedded in polydimethylsiloxane film and, with biaxial stretching to control the interparticle distance, concomitant variations of the quadrupolar and dipolar couplings were observed. As the interparticle distance increased, the intensity of the quadrupolar cooperative plasmon mode resonance decreased and dipolar coupling completely disappeared. The local electric field of the 2D Ag NP array was calculated by using finite difference time domain simulation and qualitatively showed agreement with the experimental measurements.     

Combining Electrodeposition and Optical Microscopy for Probing Size‐Dependent Single‐Nanoparticle Electrochemistry

Electrodeposition of nanoparticles (NPs) is a promising route for the preparation of highly electroactive nanostructured electrodes. By taking advantage of progressive electrodeposition, disordered arrays with a wide size distribution of Ag NPs are produced. Combined with surface‐reaction monitoring by using highly sensitive backside absorbing‐layer optical microscopy (BALM), such arrays offer a platform for screening size‐dependent electrochemistry at the single NP level. In particular, this strategy allows rationalizing the electrodeposition dynamics at the single‐NP level (>10 nm), up to the point of quantifying the presence of metal nanoclusters (<2 nm), and probing easier NP oxidation with size decrease, either through electrochemical or galvanic reactions.     

Electrochemistry of Nanoparticles

Metal nanoparticles (NPs) find widespread application as a result of their unique physical and chemical properties. NPs have generated considerable interest in catalysis and electrocatalysis, where they provide a high surface area to mass ratio and can be tailored to promote particular reaction pathways. The activity of NPs can be analyzed especially well using electrochemistry, which probes interfacial chemistry directly. In this Review, we discuss key issues related to the electrochemistry of NPs. We highlight model studies that demonstrate exceptional control over the NP shape and size, or mass‐transport conditions, which can provide key insights into the behavior of ensembles of NPs. Particular focus is on the challenge of ultimately measuring reactions at individual NPs, and relating the response to their structure, which is leading to imaginative experiments that have an impact on electrochemistry in general as well as broader surface and colloid science.     

Controlled Assembly of Block Copolymer Coated Nanoparticles in 2D Arrays

The defined assembly of nanoparticles (NPs) in polymer matrices is an important prerequisite for next‐generation functional materials. A promising approach to control NP positions in polymer matrices at the nanometer scale is the use of block copolymers. It allows the selective deposition of NPs in nanodomains, but the final defined and ordered positioning of the NPs within the domains has not been possible. This can now be achieved by coating NPs with block copolymers. The self‐assembly of block copolymer‐coated NPs directly leads to ordered microdomains containing ordered NP arrays with exactly one NP per unit cell. By variation of the grafting density, the inter‐nanoparticle distance can be controlled from direct NP surface contact to surface separations of several nanometers, determined by the thickness of the polymer shell. The method can be applied to a wide variety of block copolymers and NPs and is thus suitable for a broad range of applications.     

Mechanistic Insight into Nanoparticle Surface Adsorption by Solution NMR Spectroscopy in an Aqueous Gel

Engineering nanoparticle (NP) functions at the molecular level requires a detailed understanding of the dynamic processes occurring at the NP surface. Herein we show that a combination of dark‐state exchange saturation transfer (DEST) and relaxation dispersion (RD) NMR experiments on gel‐stabilized NP samples enables the accurate determination of the kinetics and thermodynamics of adsorption. We used the former approach to describe the interaction of cholic acid (CA) and phenol (PhOH) with ceria NPs with a diameter of approximately 200 nm. Whereas CA formed weak interactions with the NPs, PhOH was tightly bound to the NP surface. Interestingly, we found that the adsorption of PhOH proceeds via an intermediate, weakly bound state in which the small molecule has residual degrees of rotational diffusion. We believe the use of aqueous gels for stabilizing NP samples will increase the applicability of solution NMR methods to the characterization of nanomaterials.     

In Situ Synthesis of Self‐Assembled Gold Nanoparticles on Glass or Silicon Substrates through Reactive Inkjet Printing

A facile and low cost method for the synthesis of self‐assembled nanoparticles (NPs) with minimal size variation and chemical waste by using reactive inkjet printing was developed. Gold NPs with diameters as small as (8±2) nm can be made at low temperature (120 °C). The size of the resulting NPs can be readily controlled through the concentration of the gold precursor and oleylamine ink. The pure gold composition of the synthesized NPs was confirmed by energy‐dispersive X‐ray spectroscopy (EDXS) analysis. High‐resolution SEM (HRSEM) and TEM (HRTEM), and X‐ray diffraction revealed their size and face‐centered cubic (fcc) crystal structure, respectively. Owing to the high density of the NP film, UV/Vis spectroscopy showed a red shift in the intrinsic plasmonic resonance peak. We envision the extension of this approach to the synthesis of other nanomaterials and the production of tailored functional nanomaterials and devices.     

Engineering of UV‐absorbing polypropylene films containing poly(2‐(2′‐hydroxy‐5′‐methacryloxyethylphenyl)‐2H‐benzotriazole) nanoparticles

Ultraviolet‐absorbing nanoparticles (NPs) were prepared by emulsion co‐polymerization of the vinylic monomer 2‐(2′‐hydroxy‐5′‐methacryloxyethylphenyl)‐2H‐benzotriazole (Norbloc?, NB) with the crosslinking monomer divinylbenzene. The effect of total monomer, surfactant, crosslinker, and initiator concentrations on the size and size distribution of the formed NPs was elucidated. The NB monomer and the formed polyNB (PNB) NPs of 19 ± 2 nm were then incorporated into polypropylene (PP) films by melt‐compounding technique by using cast film extrusion. Increasing the PNB NP concentrations integrated within the PP films decreased their UV transmittance. Migration of the UV absorbing PNB NPs from the PP films was not observed during 3 years of storage at room temperature or while exposure to extreme conditions. Under the same conditions, a significant migration was observed for the NB monomer‐containing films. Overall, the PNB NP‐containing films are clear and transparent, although the haze was affected by the addition of NB and PNB NPs. Moreover, the films have good mechanical properties and UV‐blocking quality. Copyright © 2017 John Wiley & Sons, Ltd.     

Magnetic soft silicone elastomers with tunable mechanical properties for magnetically actuated devices

Polydimethylsiloxane (PDMS)/iron oxide magnetic nanoparticle (NP) composites with tailored mechanical properties are prepared for use in magnetically actuated soft devices based on their controlled deformation by the application of an external magnetic field. This investigation reports the synthesis and functionalization of iron oxide NPs, the preparation of the PDMS/NP composites, the evaluation of NP dispersion using scanning electron microscopy (SEM) and optical microscopy, and the mechanical characterization of the composite films. Characterization includes rheological measurements as well as stress‐strain curves to obtain the Young modulus and elongation at break. SEM is used to probe individual NP dispersion, whereas optical microscopy provides rapid access to quantitative information about the size and distribution of particle aggregates. Results for nonfunctionalized (nf), oleic acid (OA)‐coated, and stearic acid (SA)‐coated iron oxide NPs and their blends are presented. PDMS elastomers containing both OA‐ and SA‐coated iron oxide NPs are found to have very low Young moduli with substantially higher resistance to failure than neat PDMS. For example, a formulation containing 2.5 wt% OA‐coated NPs and 2.5 wt% SA‐coated iron oxide NPs has a modulus of 0.15 MPa (compared with 0.24 MPa for neat PDMS), while it can withstand an elongation of about 1.5 times its initial length compared with only 0.3 times for neat PDMS. As a comparison, the modulus of the most commonly used commercial PDMS elastomer (Sylgard 184) is an order of magnitude higher than that of the composites prepared here, whereas maximum elongation is similar for the two. The formulations developed in this work could be used in applications where high deformability is required with limited magnetic field strength and/or NP loading.     

Combined Blip and Staircase Response of Ascorbic Acid‐Stabilized Copper Single Nanoparticle Collision by Electrocatalytic Glucose Oxidation

The current response of the collision of ascorbic acid‐stabilized copper (Cu) single nanoparticles (NPs) on a gold (Au) ultramicroelectrode (UME) surface was observed by using an electrocatalytic amplification method. Here, the glucose oxidation electrocatalyzed by oxidized Cu NPs was used as the indicating reaction. In this system, the NP collision signals were obtained simultaneously by both direct particle electrolysis and electrocatalytic amplification. For example, when the applied potential was high enough for Cu NP oxidation, a blip response combined with a staircase response was observed as a current signal. The blip part in the single Cu NP collision signal indicates the self‐oxidation of a Cu NP, and the staircase part indicates the steady‐state electrocatalytic reaction by oxidized Cu NP.     

Probing nanocolumnar silver nanoparticle/zinc oxide hierarchical assemblies with advanced surface plasmon resonance and their enhanced photocatalytic performance for formaldehyde removal

Recent advances in photocatalysis focus on the development of materials with hierarchical structure and on the surface plasmon resonance (SPR) phenomenon exhibited by metal nanoparticles (NPs). In this work, both are combined in a material where size‐controllable Ag‐NPs are uniformly loaded onto the hierarchical microporous and mesoporous and nanocolumnar structures of ZnO, resulting in Ag‐NP/ZnO nanocomposites. The embedded Ag‐NPs slightly decrease the hydrophobicity of fibrous ZnO, improve its wettability, and increase the absorption of formaldehyde (H₂CO) onto the photocatalyst, all of this resulting in excellent photodegradation of formaldehyde in aqueous solution. Besides, we found that Ag‐NPs with optimal size not only accelerate the charge transfer to the surface of ZnO, but also strengthen the SPR effect in the intercolumnar channels of fibrous ZnO particles combining with high concentration of photo‐generated radical species. The micro‐to‐mesoporous ZnO is like a nanoarray packed Ag‐NPs. With Ag‐NPs of diameter 2.5 < ? < 6.5 nm, ZnO exhibits the most superior photodegradation rate constant value of 0.0239 min^?1 with total formaldehyde removal of 97%. This work presents a new feasible approach involving highly sophisticated Ag‐NP/ZnO architecture combining the SPR effect and hierarchically ordered structures, which results in high photocatalytic activity for formaldehyde photodegradation.     

Design,Synthesis, and Phenotypic Profiling of Pyrano‐Furo‐Pyridone Pseudo Natural Products

Natural products (NPs) inspire the design and synthesis of novel biologically relevant chemical matter, for instance through biology‐oriented synthesis (BIOS). However, BIOS is limited by the partial coverage of NP‐like chemical space by the guiding NPs. The design and synthesis of “pseudo NPs” overcomes these limitations by combining NP‐inspired strategies with fragment‐based compound design through de novo combination of NP‐derived fragments to unprecedented compound classes not accessible through biosynthesis. We describe the development and biological evaluation of pyrano‐furo‐pyridone (PFP) pseudo NPs, which combine pyridone‐ and dihydropyran NP fragments in three isomeric arrangements. Cheminformatic analysis indicates that the PFPs reside in an area of NP‐like chemical space not covered by existing NPs but rather by drugs and related compounds. Phenotypic profiling in a target‐agnostic “cell painting” assay revealed that PFPs induce formation of reactive oxygen species and are structurally novel inhibitors of mitochondrial complex I.     

Design,Synthesis, and Phenotypic Profiling of Pyrano‐Furo‐Pyridone Pseudo Natural Products

Natural products (NPs) inspire the design and synthesis of novel biologically relevant chemical matter, for instance through biology‐oriented synthesis (BIOS). However, BIOS is limited by the partial coverage of NP‐like chemical space by the guiding NPs. The design and synthesis of “pseudo NPs” overcomes these limitations by combining NP‐inspired strategies with fragment‐based compound design through de novo combination of NP‐derived fragments to unprecedented compound classes not accessible through biosynthesis. We describe the development and biological evaluation of pyrano‐furo‐pyridone (PFP) pseudo NPs, which combine pyridone‐ and dihydropyran NP fragments in three isomeric arrangements. Cheminformatic analysis indicates that the PFPs reside in an area of NP‐like chemical space not covered by existing NPs but rather by drugs and related compounds. Phenotypic profiling in a target‐agnostic “cell painting” assay revealed that PFPs induce formation of reactive oxygen species and are structurally novel inhibitors of mitochondrial complex I.     

Staged Surface Patterning and Self‐Assembly of Nanoparticles Functionalized with End‐Grafted Block Copolymer Ligands

Using two orthogonal external stimuli, programmable staged surface patterning and self‐assembly of inorganic nanoparticles (NPs) was achieved. For gold NPs capped with end‐grafted poly(styrene‐block‐(4‐vinylbenzoic acid)), P(St‐block‐4VBA), block copolymer ligands, surface‐pinned micelles (patches) formed from NP‐adjacent PSt blocks under reduced solvency conditions (Stimulus 1); solvated NP‐remote P(4VBA) blocks stabilized the NPs against aggregation. Subsequent self‐assembly of patchy NPs was triggered by crosslinking the P(4VBA) blocks with copper(II) ions (Stimulus 2). Block copolymer ligand design has a strong effect on NP self‐assembly. Small, well‐defined clusters assembled from NPs functionalized with ligands with a short P(4VBA) block, while NPs tethered with ligands with a long P(4VBA) block formed large irregularly shaped assemblies. This approach is promising for high‐yield fabrication of colloidal molecules and their assemblies with structural and functional complexity.     

Hydrophobic Cysteine Poly(disulfide)‐based Redox‐Hypersensitive Nanoparticle Platform for Cancer Theranostics

Selective tumor targeting and drug delivery are critical for cancer treatment. Stimulus‐sensitive nanoparticle (NP) systems have been designed to specifically respond to significant abnormalities in the tumor microenvironment, which could dramatically improve therapeutic performance in terms of enhanced efficiency, targetability, and reduced side‐effects. We report the development of a novel L ‐cysteine‐based poly (disulfide amide) (Cys‐PDSA) family for fabricating redox‐triggered NPs, with high hydrophobic drug loading capacity (up to 25 wt % docetaxel) and tunable properties. The polymers are synthesized through one‐step rapid polycondensation of two nontoxic building blocks: L ‐cystine ester and versatile fatty diacids, which make the polymer redox responsive and give it a tunable polymer structure, respectively. Alterations to the diacid structure could rationally tune the physicochemical properties of the polymers and the corresponding NPs, leading to the control of NP size, hydrophobicity, degradation rate, redox response, and secondary self‐assembly after NP reductive dissociation. In vitro and in vivo results demonstrate these NPs’ excellent biocompatibility, high selectivity of redox‐triggered drug release, and significant anticancer performance. This system provides a promising strategy for advanced anticancer theranostic applications.     

On the Hopping Efficiency of Nanoparticles in the Electron Transfer across Self‐Assembled Monolayers

Redox reactions of solvated molecular species at gold‐electrode surfaces modified by electrochemically inactive self‐assembled molecular monolayers (SAMs) are found to be activated by introducing Au nanoparticles (NPs) covalently bound to the SAM to form a reactive Au–alkanedithiol–NP–molecule hybrid entity. The NP appears to relay long‐range electron transfer (ET) so that the rate of the redox reaction may be as efficient as directly on a bare Au electrode, even though the ET distance is increased by several nanometers. In this study, we have employed a fast redox reaction of surface‐confined 6‐(ferrocenyl) hexanethiol molecules and NPs of Au, Pt and Pd to address the dependence of the rate of ET through the hybrid on the particular NP metal. Cyclic voltammograms show an increasing difference in the peak‐to‐peak separation for NPs in the order Au<Pt<Pd, especially when the length of the alkanedithiol increases from octanedithiol to decanedithiol. The corresponding apparent rate constants, k_app, for decanedithiol are 1170, 360 and 14 s^?1 for NPs of Au, Pt and Pd, respectively, indicating that the efficiency of NP mediation of the ET clearly depends on the nature of the NP. Based on a preliminary analysis rooted in interfacial electrochemical ET theory, combined with a simplified two‐step view of the NP coupling to the electrode and the molecule, this observation is referred to the density of electronic states of the NPs, reflected in a broadening of the molecular electron/NP bridge group levels and energy‐gap differences between the Fermi levels of the different metals.     

Tuning Nanoparticle Catalysis for the Oxygen Reduction Reaction

Advances in chemical syntheses have led to the formation of various kinds of nanoparticles (NPs) with more rational control of size, shape, composition, structure and catalysis. This review highlights recent efforts in the development of Pt and non‐Pt based NPs into advanced nanocatalysts for efficient oxygen reduction reaction (ORR) under fuel‐cell reaction conditions. It first outlines the shape controlled synthesis of Pt NPs and their shape‐dependent ORR. Then it summarizes the studies of alloy and core–shell NPs with controlled electronic (alloying) and strain (geometric) effects for tuning ORR catalysis. It further provides a brief overview of ORR catalytic enhancement with Pt‐based NPs supported on graphene and coated with an ionic liquid. The review finally introduces some non‐Pt NPs as a new generation of catalysts for ORR. The reported new syntheses with NP parameter‐tuning capability should pave the way for future development of highly efficient catalysts for applications in fuel cells, metal‐air batteries, and even in other important chemical reactions.     

Size tuning of luminescent silicon nanoparticles with meso-porous silicon membranes

Size tuning of silicon (Si) nanoparticles (NPs) with the use of meso-porous silicon (meso-PS) free-standing layers is reported for the first time. Accumulation of Si NPs inside the membrane pores during the filtering process (NP transport through the meso-PS) leads to an auto-filtration effect (called Si-by-Si (SBS) filtration) allowing more efficient size selection of the NPs. General complex fractal shape and surface chemistry of the whole porous network, layer thickness as well as a given initial NP size dispersion determine final size of the NPs in the filtered solution. Moreover, quantum of step-like NP size increasing equal to 0.12 nm was found.