Kinetic Aspects of Styrene Polymerization with an Acyloxyamine

The present paper evaluates largely unstudied kinetic aspects of styrene polymerization with a (relatively new) acyloxyamine over several temperature levels and contrasts these features with regular styrene polymerization and styrene polymerization with TEMPO. These comparisons show that the system behaves rather like regular thermal polymerization of styrene at temperatures between 120–180°C. However, at higher temperatures (> 180°C), acyloxyamine has an initiator-like contribution, giving the rate of polymerization an extra boost while decreasing molecular weights. This is further corroborated by mathematical modeling for both conversion and molecular weight averages.     

Reverse atom transfer radical polymerization of vinyl monomers with Fe[SC(S)NEt2]3 alone as the catalyst

The living radical polymerization of methyl methacrylate and styrene was successfully carried out with diethyl 2,3‐dicyano‐2,3‐diphenylsuccinate (DCDPS)/ferric tri(diethyldithiocarbamate) as a novel reverse atom transfer radical polymerization initiation system in which DCDPS was a hexa‐substituted ethane‐type thermal iniferter, DC was a diethyldithiocarbamate group, and no additional ligands such as nitrogen‐ or phosphine‐based compounds were required. The bulk polymerization of methyl methacrylate was carried out at 95 °C, and that of styrene was carried out at 120 °C. Poly(methyl methacrylate) and polystyrene (PSt) with high molecular weights and quite narrow molecular weight distributions (as low as 1.09 for PSt) were obtained. ¹H NMR spectroscopy revealed the presence of an α‐(carbethoxycyanophenyl)methyl group from the initiator and an ω‐DC group from the catalyst in the obtained polymers. Various chain‐extension reactions under UV light or thermal treatments were successfully conducted to prove the presence and efficient reinitiating of the ω‐DC group. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3464–3473, 2001     

Molecular weight distributions in radiation-induced polymerization. VII. γ-ray-induced polymerization of “wet” styrene in the solid state

In the present paper kinetic and molecular weight distribution results are reported for the γ-ray-initiated polymerization of styrene in the solid state. “In-source” polymerization over the temperature range ?35°C to ?55°C and post-polymerization at ?35°C have been investigated for “wet” styrene samples (water concentration ≈ 10^?3 mole/l.). An interesting feature of the solid-state polymerization of styrene is the bimodal nature of the molecular weight distribution. On a qualitative basis the results resemble those obtained previously for the polymerization of rigorously dried (“dry”) styrene. However, there are noticeable differences on a quantitative basis resulting from the considerable difference in the water content between wet and dry samples. On the basis of these studies, the kinetic and molecular weight distribution data have been interpreted as being indicative of polymerization occurring simultaneously via free-radical and cationic mechanisms.     

Grafting of polymers onto and/or from silica surface during the polymerization of vinyl monomers in the presence of γ‐ray‐irradiated silica

The effects of radicals on silica surface, which were formed by γ‐ray irradiation, on the polymerization of vinyl monomers were investigated. It was found that the polymerization of styrene was remarkably retarded in the presence of γ‐ray‐irradiated silica above 60 °C, at which thermal polymerization of styrene is readily initiated. During the polymerization, a part of polystyrene formed was grafted onto the silica surface but percentage of grafting was very small. On the other hand, no retardation of the polymerization of styrene was observed in the presence of γ‐ray‐irradiated silica below 50 °C; the polymerization tends to accelerate and polystyrene was grafted onto the silica surface. Poly(vinyl acetate) and poly(methyl methacrylate) (MMA) were also grafted onto the surface during the polymerization in the presence of γ‐ray‐irradiated silica. The grafting of polymers onto the silica surface was confirmed by thermal decomposition GC‐MS. It was considered that at lower temperature, the grafting based on the propagation of polystyrene from surface radical (“grafting from” mechanism) preferentially proceeded. On the contrary, at higher temperature, the coupling reaction of propagating polymer radicals with surface radicals (“grafting onto” mechanism) proceeded to give relatively higher molecular weight polymer‐grafted silica. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2972–2979, 2006     

Alternating copolymers of styrene with tricyanoethylene and ethyl 2,3-dicyanoacrylate

Ethyl 2,3-dicyanoacrylate was prepared from ethyl 2,3-dicyanopropionate. High molecular weight, 1:1 alternating copolymers of styrene with tricyanoethylene and ethyl 2,3-dicyanoacrylate were prepared by bulk polymerization with the use of free-radical initiators. Solution polymerization of styrene with ethyl 2,3-dicyanoacrylate in acetonitrile gave the highest molecular weight copolymer (η_inh = 0.74). The copolymers showed unusual thermal properties, i.e., an initial break that was 50–75°C lower than that of polystyrene followed by the formation of an intermediate product that was fairly stable to approximately 500°C.     

Effect of cobalt(III) 1-nitroso-2-naphtholate on free-radical polymerization to vinyl monomers

It has been shown that, at 70°C, cobalt(III) 1-nitroso-2-naphtholate inhibits the free-radical polymerization of styrene, methyl methacrylate, butyl methacrylate, and butyl acrylate. The induction period linearly increases with complex concentration. The polymerization of styrene (120°C) carried out in the presence of cobalt(III) 1-nitroso-2-naphtholate shows typical features of pseudoliving polymerization, namely, linear ln[M]₀/[M]-time and molecular mass-conversion plots. When the monomers are allowed to stand with a complex (7 × 10^?3 mol/l) and an initiator (5 × 10^?3 mol/l) for 1 day at 20°C, the ESR signal corresponding to the nitroxide radical appears. In the course of polymerization, the signal disappears, indicating the consecutive transformation of the cobalt(III) 1-nitroso-2-naphtholate radical into the macronitroxide adduct. Polystyrene samples isolated at various conversions initiate the secondary polymerization of styrene and its block copolymerization with methyl methacrylate.     

Molecular weight distributions in radiation-induced polymerization. VI. γ-ray-induced polymerization of “dry” styrene in the solid state

The γ-ray-initiated polymerization of styrene in the solid state has been studied over the temperature range ?35°C to ?55°C for samples exhaustively purified and dried to remove residual water (“dry” samples). Comparison with kinetic results previously reported for dry samples in the liquid state indicates a sharp decrease in the rate of polymerization resulting from the liquid to solid state transition. The molecular weight distributions for in-source polymerization at ?35°C and ?40°C are bimodal in nature, and the appearance of a third peak is noticeable at ?47°C and ?55°C. In the case of postpolymerization at ?35°C the molecular weight distribution is bimodal as in the case of in-source samples. In the former case, however, the high molecular weight peak is predominant whereas the low molecular weight peak predominates in the latter. These results have been tentatively attributed to the postulated coexistence of two distinct propagating species which are radical and cationic in nature.     

Multibubble sonolysis and sonoluminescence in molten elementary sulfur and sulfur—styrene mixture

The effect of saturation with argon, as well as styrene and iodine additives on the temperature dependence of multibubble sonoluminescence intensity in molten sulfur at 120–230 °C was studied. The shape of the temperature dependence with a maximum at 170–200 °C is determined by the viscosity variations related to the changes in the molecular structure of molten elemental sulfur. At high temperatures, cyclooctasulfane (S₈) molecules break to radical products, which then undergo polymerization that can be slowed down by the additives. Sulfurization of styrene during sonolysis of a sulfur—styrene mixture resulting in products of the thiophene series was detected. Unlike thermal sulfurization that affords 2,5-diphenylthiophene as a major product, sonochemical sulfurization results mainly in 2,4-diphenylthiophene. The mechanism of 2,4-diphenylthiophene formation initiated by the reaction of styrene molecules with S⁺ ions produced upon fragmentation of S₈ within cavitation bubbles is proposed. The glow of electronically excited S⁺* ions is responsible for the band with a maximum at 560 nm in the sonoluminescence spectrum of molten sulfur, which is suppressed by the styrene additive.     

Catalytic‐chain‐transfer polymerization of styrene revisited: The importance of monomer purification and polymerization conditions

The cobaloxime‐mediated catalytic‐chain‐transfer polymerization of styrene at 60 °C was studied with an emphasis on the effects of monomer purification and polymerization conditions. Commonly used purification methods, such as column chromatography and simple vacuum distillation, were not adequate for obtaining kinetic data to be used in mechanistic modeling. A purification regime involving inhibitor removal with basic alumina, followed by polymerization of the styrene in the presence of the cobaloxime and subsequent vacuum distillation, was found to be essential to this end. It was then possible to quantitatively investigate effects such as the initiator concentration and conversion dependencies of the apparent chain‐transfer constant that resulted from the occurrence of cobalt–carbon bond formation. A value of about 9 × 10³ was found for the true chain‐transfer constant to cobaloxime boron fluoride, that is, its value in the absence of cobalt–carbon bond formation. Furthermore, previous predictions were confirmed: the measured chain‐transfer constant decreased with increasing initiator concentration and conversion. Finally, it was confirmed that the presence of light increased the amount of free Co(II) catalyst in agreement with other studies. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 752–765, 2003     

Thermokinetics evaluation and simulations for the polymerization of styrene in the presence of various inhibitor concentrations

Styrene is an important commodity chemical that is globally applied in various polymerization processes. The aim of this study was to obtain integrated thermokinetics and safety parameters for polymerization of styrene. We mainly used differential scanning calorimetry (DSC), thermal activity monitor (TAM), and simulative methods to investigate thermal polymerization of styrene and styrene containing various levels of 4-tertiary-butylcatechol (TBC). The results obtained included the rate constant (k), reaction order (n), apparent activation energy (E _a), frequency factor (A), and so on, from various DSC curves and simulative methods. From DSC curves, the exothermic onset temperature (T ₀) was about 105 and 132°C for styrene and styrene containing 10 ppm TBC. On the other hand, the test results from TAM indicated that styrene polymerization displays an autocatalytic phenomenon from 50–85°C. By means of this study, the intrinsic safety of a system for styrene during transportation and storage could be established.     

The thermal polymerization of styrene in diethyladipate at temperatures up to 160°

The thermal polymerization of styrene in diethyladipate has been studied dilatometrically at temperatures from 90 to 160°. The rate was found to be directly proportional to (monomer concentration)² and the molecular weight of the polymer formed was controlled mainly by chain transfer to monomer, particularly at the higher temperatures. A value of 86 ± 2 kJ/mol was obtained for the overall energy of activation for the polymerization, and values of 7.16 × 10^?5. 2.0 × 10^?4 and 5.5 × 10^?4 were found for the transfer constant for diethyladipate at 120. 140 and 160° respectively.     

Polymerization of vinyl compounds with heterocyclic groups. IV. Thermal polymerization of 2-vinylthiophene

2-Vinylthiophene was found to undergo thermal polymerization. With benzene as diluent, the overall rate of polymerization was proportional to the 2.5 power of monomer concentration, suggesting that the thermal initiation is a termolecular process. The following Arrhenius equation was obtained from the polymerization data for the range 55–100°C: The activation energy of the thermal initiation was estimated to be 28.2 kcal/mole, which was similar to those values obtained for styrene and 2-vinylfuran. When a dilute solution of the monomer in bromobenzene was heated in an ampoule at 151°C, a dimer, mp 82°C, was obtained in a good yield. The spectroscopic data indicated that the dimer was a Diels-Alder type adduct. The initiation of the thermal polymerization was considered to involve hydrogen abstraction by monomer from the Diels-Alder dimer, in common with the initiation of other vinylaromatic monomers.     

The measurement of rates of initiation in the thermal polymerization of styrene

The thermal initiation of the polymerization of styrene has been studied at temperatures from 60–140°C using DPPH as a free radical scavenger. Rates of free radical formation, measured by the decrease in absorbance at 525 nm, are about seven times greater than those obtained from inhibition period measurements. The difference is probably due to the much greater reactivity of trinitrobenzene derivatives towards diradicals from styrene than towards styryl monoradicals. This view is supported by the different behaviour of the AIBN initiated polymerization of styrene in the presence of DPPH. The thermal initiation process has a low efficiency of initiation and the activation energy is 121 kJ/mole. The results strongly support the diradical mechanism for the thermal initiation of styrene polymerization.     

Relevance of a prereaction for the in situ NMP of styrene using the C‐Phenyl‐N‐tert‐butylnitrone/2,2′‐azobis(isobutyronitrile) pair

In this article, we compare two routes for carrying out in situ nitroxide‐mediated polymerization of styrene using the C‐phenyl‐N‐tert‐butylnitrone (PBN)/2,2′‐azobis(isobutyronitrile) (AIBN) pair to identify the best one for an optimal control. One route consists in adding PBN to the radical polymerization of styrene, while the other approach deals with a prereaction between the nitrone and the free radical initiator prior to the addition of the monomer and the polymerization. The combination of ESR and kinetics studies allowed demonstrating that when the polymerization of styrene is initiated by AIBN in the presence of enough PBN at 110 °C, fast decomposition of AIBN is responsible for the accumulation of dead polymer chains at the early stages of the polymerization, in combination with controlled polystyrene chains. On the other hand, PBN acts as a terminating agent at 70 °C with the formation of a polystyrene end‐capped by an alkoxyamine, which is not labile at this temperature but that can be reactivated and chain‐extended by increasing the temperature. Finally, the radical polymerization of styrene is better controlled when the nitrone/initiator pair is prereacted at 85 °C for 4 h in toluene before styrene is added and polymerized at 110 °C. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1085–1097, 2009     

Synthesis of NMP/RAFT inifers and preparation of block copolymers

Two different initiator/transfer agents (inifers) containing an alkoxyamine and a dithiobenzoate were synthetized and used to trigger out either reversible addition‐fragmentation chain transfer (RAFT) polymerization or nitroxide‐mediated polymerization (NMP). α‐Dithiobenzoate‐ω‐alkoxyamine‐difunctional polymers were produced in both cases which were subsequently used as precursors in the formation of block copolymers. This synthetic approach was applied to N‐isopropylacrylamide (NIPAM) or polyethylene oxide methacrylate (EOMA) to form α,ω‐heterodifunctional homopolymers via RAFT at 60°C which were chain extended with styrene by activating the alkoxyamine moiety at 120°C. Under such temperature conditions, it is proposed that a tandem NMP/RAFT polymerization is initiated producing a simultaneous growth of polystyrene blocks at both chain‐ends. Self‐assembled nanostructures of these amphiphilic block copolymers were evidenced by scanning electron microscopy. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Macrothiuram disulfide for the free radical synthesis of PDMS-vinyl triblock copolymers. II. Studies of chain transfer

Chain transfer constants (C_tr) for thiuram disulfide (TD) groups, included in the backbone of polydimethylsiloxane (PDMS) of different chain lengths, in methyl methacrylate (MMA) and styrene (St) were determined from measurements of the degree of polymerization. Two methods were used. The first consisted of using the initiation and transfer properties of the thiuram disulfides groups, and the second, of using a more efficient free radical initiator than TD groups, in which case the former behaves only as a transfer agent. In both the methods, the C_tr of TD was evaluated in bulk polymerization of MMA at 60, 70, 80, and 90°C. Using the first method, the C_tr of TD was measured also in solution polymerization of MMA in toluene at 100°C and, with the second one, in bulk polymerization of styrene at 60, 80, and 90°C. PDMS-based macrothiuram disulfide (macroiniferter) behaves as an “azeotropic” transfer agent for MMA and styrene at 125°C and 110°C, respectively. © 1994 John Wiley & Sons, Inc.     

Synthesis of bio-based poly(methacrylates) using SG1-containing amphiphilic macroinitiators by nitroxide mediated miniemulsion polymerization

SG1-based amphiphilic macroinitiators were synthesized from oligoethylene glycol methyl ether methacrylate and 10 mol% acrylonitrile or styrene (as the controlling comonomer) to conduct the nitroxide mediated polymerization of bio-based methacrylic monomers (isobornyl methacrylate (IBOMA) and C13 alkyl methacrylate (C13MA)) in miniemulsion. The effect of the addition of surfactant (DOWFAX 8390), co-stabilizer (n-hexadecane) and different reaction temperatures (80, 90 and 100°C) on polymerization kinetics was studied. We found that the NMP of IBOMA/C13MA using amphiphilic macroalkoxyamines were most effective during miniemulsion polymerization (linear trend of M_n versus conversion and high latex stability) in presence of 2 wt% surfactant and 0.8 wt% co-stabilizer (relative to monomer) at 90°C. The effect of surfactant, co-stabilizer and temperature on particle size during the polymerization was studied and suggested a decrease in initial particle size with the addition of surfactant and co-stabilizer. Finally, the thermal properties of IBOMA/C13MA polymers, prepared by amphiphilic macroinitiators, were examined thoroughly, indicating a T_g in the range of −44°C < T_g < 109°C.     

Polymerization of vinyl monomers by a new oligoperoxide: Oligo(adipoyl-5-peroxy-2,5-dimethyl n-hexyl peroxide)

A new polymeric initiator, oligo(adipoyl-5-peroxy-2,5-dimethyl n-hexyl peroxide), was synthesized by interfacial condensation of adipoyl chloride with 2,5-dimethyl-2,5-dihydroperoxy hexane. This can be used as an initiator to prepare block copolymers by free radical mechanism in a procedure involving several steps, since the colorless, viscous liquid, oligoperoxide, has 8–10 peroxide groups per molecule. The thermal decomposition of this oligoperoxide in benzene solution at 98°C was first order and its half life was 9.75 h. The results of the polymerization kinetics show that this oligoperoxide lies in between of 2,5-dimethyl-2,5-dihydroperoxyhexane and benzoyl peroxide for empirical polymerization rates of styrene and methyl methacrylate at 80°C.     

Effect of absorbed dose on the postradiation dry distillation of cellulose and lignin

The postradiation dry distillation of cellulose and lignin has been studied. During the course of irradiation to 3 MGy, the weights of samples remained almost unchanged. The overpoints of lignin and cellulose irradiated at 2.2 MGy decrease by ～80° and ～100°, respectively. A third of the condensate from cellulose and almost a half that from lignin were distilled off at lower temperatures. Thermally unstable compounds are formed in cellulose; these compounds are predominantly converted into furans upon subsequent heating. The distillation of irradiated lignin affords a smaller amount of tar, but it is richer in methoxyphenols. The aqueous organic fraction distilled off has a higher concentration of soluble organic compounds.     

Synthesis of proton‐conducting membranes by the utilization of preirradiation grafting and atom transfer radical polymerization techniques

The atom transfer radical polymerization (ATRP) of styrene onto poly(vinylidene fluoride)‐graft‐poly(vinylbenzyl chloride) (PVDF‐g‐PVBC) membranes was investigated. Novel membranes were designed for fuel‐cell applications. The benzyl chloride groups in the PVDF‐g‐PVBC membranes functioned as initiators, and a Cu‐based catalytic system with the general formula Cu(n)X_n/ligand [where X is Cl or Br and the ligand is 2,2′‐bipyridyl (bpy)] was employed for the ATRP. In addition, 10 vol % dimethylformamide was added for increased solubility of the catalyst complex in styrene. The system was homogeneous, except for the membrane, when the initiator/copper halide/ligand/monomer molar ratio was 1/1/3/500. As anticipated, the fastest polymerization rate of styrene was observed with the copper bromide/bpy‐based catalyst system. The reaction rate was strongly temperature‐dependent within the studied temperature interval of 100–130 °C. The degree of grafting increased linearly with time, thereby indicating first‐order kinetics, regardless of the polymerization temperature. Furthermore, 120 °C was the maximum polymerization temperature that could be used in practice because the membrane structure was destroyed at higher temperatures. The degree of styrene grafting reached 400% after 3 h at 120 °C. Such a high degree of grafting could not be reached with conventional uncontrolled radiation‐induced grafting methods because of termination reactions. On the basis of an Arrhenius plot, the activation energy for the homogeneous ATRP of styrene was 217 kJ/mol. The prepared membranes became proton‐conducting after sulfonation of the polystyrene grafts. The highest conductivity measured for the prepared membranes was 70 mS/cm, which is comparable to the values normally measured for commercial Nafion membranes. The scanning electron microscopy/energy‐dispersive X‐ray results showed that the membranes had to be grafted through the matrix with both PVBC and polystyrene to become proton‐conducting after sulfonation. In addition, PVDF‐g‐[PVBC‐g‐(styrene‐block‐tert‐butyl acrylate)] membranes were also synthesized by ATRP. © 2002 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 591–600, 2002; DOI 10.1002/pola.10146