A novel route to poly(2-hydroxyethyl methacrylate) and its amphiphilic block copolymers

The vinyl of the ester group of 2-vinyloxyethyl methacrylate was first selectively reacted with acetic acid to obtain 2-[1-(acetoxy)ethoxy]ethyl methacrylate ( 2 ). This protected monomer was subjected to anionic polymerization in tetrahydrofuran at −60°C in the presence of LiCl, using 1,1-diphenylhexyllithium as initiator. The molecular weight of the polymer could thus be controlled and a narrow molecular weight distribution obtained. The protecting group, 1-(acetoxy)ethyl, could be easily eliminated (by quenching the polymerization reaction with methanol and water) to generate poly(2-hydroxyethyl methacrylate) (poly(HEMA)). Block copolymers were also prepared by the sequential anionic polymerization of MMA and 2 or styrene and 2 . They possess narrow molecular weight distributions, and controlled molecular weights and compositions. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1865–1872, 1998     

Styrene polymerization with some new macro or macromonomeric azoinitiators having peg units

Several new macroinitiators and macromerinitiators (macroinimers) were synthesized and evaluated for the bulk polymerization of sytrene at 60°C. Macroinitiators were prepared from the reaction of 4,4′-dicyano-4,4′ azovaleryl chloride ( 1 ) with poly(ethylene glycol) (PEG) with a M_ω of 400 and with either benzoyl chloride, acetyl chloride, phenyl isocyanate, or poly(ethylene glycol) oleyl ether. Macromer initiators were also prepared from the reaction of 1 with PEG having M_ω values of 200, 400, 600, 1000, or 1500 and with 4-vinylbenzyl chloride. The bulk polymerization of styrene by macroinimers gave crosslinked styrene-PEG block copolymers, while the polymerization by macroinitiators gave soluble copolymers. The molecular weights of the styrene-PEG block copolymers obtained with macroinitiators having either oleyl, benzoyl, or phenyl urethane end groups were 22000–29000 g/mol. DSC measurements showed that the crosslinked block copolymers had crystalline PEG units with melting transitions ranging from 11–37°C. © 1994 John Wiley & Sons, Inc.     

Novel Copolymers of Styrene. 7. Dihalogen Ring-substituted Ethyl 2-Cyano-3-phenyl-2-propenoates

Electrophilic trisubstituted ethylenes, dihalogen ring-substituted ethyl 2-cyano-3-phenyl-2-propenoates, RPhCH?C(CN)CO₂C₂H₅ (where R is 2,3-diCl, 2,4-diCl, 2,6-diCl, 3,4-diCl, 3,5-diCl, 2,3-diF, 2,4-diF, 2,5-diF, 2,6-diF, 3,4-diF, 3,5-diF) were prepared and copolymerized with styrene. The monomers were synthesized by the piperidine catalyzed Knoevenagel condensation of ring-substituted benzaldehydes and ethyl cyanoacetate, and characterized by CHN analysis, IR, ¹H and ¹³C-NMR. All the ethylenes were copolymerized with styrene (M₁) in solution with radical initiation (ABCN) at 70°C. The composition of the copolymers was calculated from nitrogen analysis, and the structures were analyzed by IR, ¹H and ¹³C-NMR. The order of relative reactivity (1/r ₁) for the monomers is 3,4-diCl (1.89) > 2,4-diCl (1.84) > 3,5-diCl (1.40) > 2,6-diCl (1.21) > 2,4-diF (1.16) > 2,3-diF (1.01) > 2,3-diCl (0.74) > 3,4-diF (0.52) > 2,6-diF (0.45) > 3,5-diF (0.44) > 2,5-diF (0.33). Relatively high T_g of the copolymers in comparison with that of polystyrene indicates a decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit. Decomposition of the copolymers in nitrogen occurred in two steps, first in the 250–500°C range with residue (2.6–5.0 wt%), which then decomposed in the 500–800°C range.     

Alternating ethylene–alkyl acrylate copolymers. I. polymer preparation

High molecular weight alternating ethylene–ethyl acrylate copolymers were prepared by using boron trifluoride to complex the acrylate ester. The polymerizations were run under mild conditions (25–50°C, 6–20 atm ethylene) in dichloromethane or dichloroethane solution with free-radical initiation. At lower ethylene pressures or at less than stoichiometric levels of BF₃, the polymers are acrylate-rich. This is due to ethyl acrylate homopolymerization competing with the copolymerization reaction. The effect of other polymerization variables is also discussed.     

Novel cyano-containing copolymers of vinyl esters for piezoelectric materials

The synthesis of a series of novel cyano-containing copolymers is described. Alternating copolymers of acrylonitrile with vinyl esters are obtained by increasing the electrophilic character of the nitrile monomers by complexation with zinc chloride. Copolymers of methyl and ethyl α-cyanoacrylates with vinyl esters are prepared using radical initiators in the presence of 7% acetic acid as inhibitor for anionic polymerization. The copolymers of methyl α-cyanoacrylate with the vinyl esters have T_g's above 140°C. Methyl vinylidene cyanide (MVCN) copolymerizes spontaneously with para-substituted styrenes to yield copolymers with high inherent viscosities and high T_g (160°C) and the copolymer of MVCN with vinyl acetate is also synthesized. The pyroelectric constants p for these polymers were measured and the values of p for the copolymers of vinyl acetate with methyl β,β-dicyanoacrylate, methyl α-cyanoacrylate, or MVCN were in the same range as the well-studied vinylidene cyanide/vinyl acetate copolymer. A higher concentration of dipoles generally results in higher T_g's and higher pyroelectric coefficients. © 1992 John Wiley & Sons, Inc.     

Nitroxide-mediated styrene polymerization initiated by an oxoaminium chloride

An oxoaminium chloride that is prepared by reacting 2,2,6,6-tetramethylpiperidinyl-1-oxy (TEMPO) with chlorine in carbon tetrachloride initiates radical polymerization of styrene at 120°C. In the early stages of polymerization, a monomeric adduct, 2,2,6,6-tetramethyl-1-(2-chloro-1-phenylethoxy)piperidine, is formed. Thereafter, styrene polymerization exhibiting the characteristics of living polymerization proceeds. High molecular weight polymers with relatively narrow molecular weight distributions are obtained by this polymerization. ¹H-NMR spectra of the polymers reveal that a chlorine atom and a TEMPO group are present at the α- and ω-termini, respectively. The monomeric adduct was prepared by heating the oxoaminium chloride and styrene in carbon tetrachloride at 65–70°C, and was characterized by ¹H- and ¹³C-NMR spectroscopy. It was found to be suitable as an initiator for nitroxide-mediated radical polymerization of styrene to make polymers with chlorine on the chain end. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2555–2561, 1998     

Controlled free‐radical polymerization of 2‐vinylpyridine in the presence of nitroxides

Bulk free‐radical polymerization of 2‐vinylpyridine (2VP) in the presence of 2,2,6,6‐tetramethylpiperidine‐N‐oxyl (TEMPO) was studied under different conditions (temperature and presence of additives). Linear poly‐(2‐vinylpyridine) with a narrow molecular weight distribution and controllable molecular weight was prepared in the presence of acetic anhydride at 95 °C up to a conversion of 66%. At higher conversions side reactions became very important (pseudoliving polymerization). By applying this procedure, well‐defined random copolymers of 2VP with styrene or tert‐butylmethacrylate as well as block copolymers of 2VP with styrene were synthesized. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2889–2895, 2001     

Kinetics of Free Radical Copolymerization. V. Copolymerization of Ethyl Acrylate with Styrene. Composition of Copolymers

The composition of copolymers formed at 50°C in ethyl acrylate/ styrene/azo-bis-isobutyronitrile/benzene systems of different composition was investigated. The experimental composition data (based on the elementary analysis of copolymers) were evaluated by the η-ζ transformation method. Finite monomer conversions were taken into account. The classical composition equation was found to describe the system under investigation. The reactivity ratios are p ₁ = 0.152 ± 0.006; p ₂ = 0.787 ± 0.023. The free radical copolymerization of ethyl acrylate and styrene has been investigated in benzene solution at 50°C. Our results on the initiation kinetics were disclosed in our recent publication [1]. Now we are reporting on our studies concerning the composition of ethyl acrylate/styrene copolymers.     

Novel Copolymers of Styrene. 9. Methyl and Methoxy Ring-Substituted 2-Cyano-3-phenyl 2-propenamides

Novel electrophilic trisubstituted ethylene monomers, methyl and methoxy ring- substituted 2-cyano-3-phenyl-2-propenamides, RPhCH=C(CN)CONH₂, where R is 2,3-dimethyl, 2,4-dimethyl, 2,5-dimethyl, 2-(3-methoxyphenoxy), 2-(4-methoxyphenoxy), 3-(4-methoxyphenoxy), 4-(4-methylphenoxy), 2,3-methylenedioxy were prepared and copolymerized with styrene. The monomers were synthesized by potassium hydroxide catalyzed Knoevenagel condensation of ring-substituted benzaldehydes and cyanoacetamide, and characterized by CHN elemental analysis, IR, ¹H- and ¹³C-NMR. Novel copolymers of the ethylenes and styrene were prepared at equimolar monomer feed composition by solution copolymerization in the presence of a radical initiator, ABCN at 70°C. The composition of the copolymers was calculated from nitrogen analysis, and the structures were analyzed by IR, ¹H- and ¹³C-NMR, GPC, DSC, and TGA. High T_g of the copolymers in comparison with that of polystyrene indicates a substantial decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit. Decomposition of the copolymers in nitrogen occurred in two steps, first in the 200–500°C range with residue (5.8–33.8 wt%), which then decomposed in the 500–800°C range.     

Effects of Operating Conditions on the Copolymerization of Castor Oil Maleate–Styrene by Suspension Polymerization

This work studies the synthesis of copolymers (MACO‐St) of castor oil maleate (MACO) and styrene (St) initiated using benzoyl peroxide (BPO) as free radical initiator through suspension polymerization. The study investigates the effects of temperature (100–140 °C), the molar ratio between styrene and MACO (2:1–4:1), BPO concentration (0.10–0.20 wt%), and water concentration (50–100 wt%) on the molecular weight distribution, thermal stability, viscosity, and biodegradability of the copolymers. Suspension polymerization allows the production of a broad range of number average molecular weight (3465–18 995 g mol^?1) and molecular weight distributions with dispersions (?) ranging from 1.8 to 4.4. The reaction presents high yields of castor oil into copolymers (>90%), which displays thermal stability up to 200 °C and are highly biodegradable according to the International Organization of Standardization reference.     

Living cationic polymerization of dihydrofuran and its derivatives

Cationic polymerization of 2,3‐dihydrofuran (DHF) and its derivatives was examined using base‐stabilized initiating systems with various Lewis acids. Living cationic polymerization of DHF was achieved using Et_1.5AlCl_1.5 in toluene in the presence of THF at 0 °C, whereas it has been reported that only less controlled reactions occurred at 0 °C. Monomer‐addition experiments of DHF and the block copolymerization with isobutyl vinyl ether demonstrated the livingness of the DHF polymerization: the number–average molecular weight of the polymers shifted higher with low polydispersity as the polymerization proceeded after the monomer addition. Furthermore, this base‐stabilized cationic polymerization system allowed living polymerization of ethyl 1‐propenyl ether and 4,5‐dihydro‐2‐methylfuran at ?30 and ?78 °C, respectively. In the polymerization of 2,3‐benzofuran, the long‐lived growing species were produced at ?78 °C. The obtained polymers have higher glass transition temperatures compared to poly(acyclic alkyl vinyl ether)s. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4495–4504, 2008     

Stimuli‐responsive reversible physical networks. II. Design and properties of homogeneous physical networks consisting of periodic copolymers synthesized by living cationic polymerization

The design and precision synthesis of physical networks consisting of copolymers with crystallizable pendant groups are described in this work. Amphiphilic periodic, statistical, and gradient copolymers consisting of octadecyl vinyl ether (ODVE) units were synthesized via living cationic polymerization. The synthesis involved the copolymerization of ODVE and 2‐methoxyethyl vinyl ether (hydrophilic) with an 1‐(isobutoxy)ethyl acetate [CH₃CH(OiBu)OCOCH₃]/Et_1.5AlCl_1.5 initiating system in the presence of a weak Lewis base to yield copolymers with very narrow molecular weight distributions (weight‐average molecular weight/number‐average molecular weight ? 1.2). All aqueous solutions of the copolymers behaved as a viscous liquid above 50 °C. When cooled below 25 °C, the solutions turned into transparent, transient physical gels (exhibiting terminal flow), regardless of the sequence distribution. Viscoelastic studies showed that a periodic copolymer gave a hard gel that was more brittle than the gels obtained from the corresponding statistical and gradient copolymers. This difference and the differences in the relaxation time and relaxation mode distribution of the copolymer gels were consistent with the sequence distributions of ODVE in the respective copolymers. These results indicate that the mechanical properties of a physical network can be controlled by the primary polymer structures. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2712‐2722, 2005     

Synthesis of methyl methacrylate,styrene, and isobutylene multiblock copolymers using atom transfer and cationic polymerization

ABCBA‐type pentablock copolymers of methyl methacrylate, styrene, and isobutylene (IB) were prepared by the cationic polymerization of IB in the presence of the α,ω‐dichloro‐PS‐b‐PMMA‐b‐PS triblock copolymer [where PS is polystyrene and PMMA is poly(methyl methacrylate)] as a macroinitiator in conjunction with diethylaluminum chloride (Et₂AlCl) as a coinitiator. The macroinitiator was prepared by a two‐step copper‐based atom transfer radical polymerization (ATRP). The reaction temperature, ?78 or ?25 °C, significantly affected the IB content in the resulting copolymers; a higher content was obtained at ?78 °C. The formation of the PIB‐b‐PS‐b‐PMMA‐b‐PS‐b‐PIB copolymers (where PIB is polyisobutylene), prepared at ?25 (20.3 mol % IB) or ?78 °C (61.3 mol % IB; rubbery material), with relatively narrow molecular weight distributions provided direct evidence of the presence of labile chlorine atoms at both ends of the macroinitiator capable of initiation of cationic polymerization of IB. One glass‐transition temperature (T_g), 104.5 °C, was observed for the aforementioned triblock copolymer, and the pentablock copolymer containing 61.3 mol % IB showed two well‐defined T_g's: ?73.0 °C for PIB and 95.6 °C for the PS–PMMA blocks. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3823–3830, 2005     

Copper(0)‐mediated living radical polymerization of acrylonitrile at room temperature

The copper(0)‐catalyzed living radical polymerization of acrylonitrile (AN) was investigated using ethyl 2‐bromoisobutyrate as an initiator and 2,2′‐bipyridine as a ligand. The polymerization proceeded smoothly in dimethyl sulphoxide with higher than 90% conversion in 13 h at 25 °C. The polymerization kept the features of controlled radical polymerization. ¹H NMR spectra proved that the resultant polymer was end‐capped by ethyl 2‐bromoisobutyrate species. Such polymerization technique was also successfully introduced to conduct the copolymerization of styrene (St) and AN to obtain well‐controlled copolymers of St and AN at 25 °C, in which the monomer conversion of St could reach to higher than 90%. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Kinetics of free-radical copolymerization of α-methylstyrene and styrene

The free-radical copolymerization of α-methylstyrene and styrene has been studied in toluene and dimethyl phthalate solutions at 60°C. Gas chromatography was used to monitor the rate of consumption of monomers. For styrene alone, the measured rate of polymerization R_p and M?_n of the polymer coincided with values expected from previous studies by other workers. Solution viscosity η affected R_p and M?_n of styrene homopolymers and copolymers as expected on the basis of an inverse proportionality between η^1/2 and termination rate. The rate of initiation by azobisisobutyronitrile appears to be independent of monomer feed composition in this system. Molecular weights of copolymers can be accounted for by considering combinative termination only. The effects of radical chain transfer are not significant. A theory is proposed in which the rate of termination of copolymer radicals is derived statistically from an ideal free-radical polymerization model. This simple theory accounts quantitatively for R_p and M?_n data reported here and for the results of other workers who have favored more complicated reaction models because of the apparent failure of simple copolymer reactivity ratios to predict polymer composition. This deficiency results from systematic losses of low molecular weight copolymer species in some analyses. Copolymer reactivity ratios derived with the assumption of a simple copolymer model and based on rates of monomer loss can be used to predict R_p values measured in other laboratories without necessity for consideration of depropagation or penultimate unit effects. The 60°C rate constants for propagation and termination in styrene homopolymerization were taken to be 176 and 2.7 × 10⁷ mole/l.-sec, respectively. The corresponding figures for α-methylstyrene are 26 and 8.1 × 10⁸ mole/l.-sec. These constants account for the sluggish copolymerization behavior of the latter monomer and the low molecular weights of its copolymers. The simple reaction scheme proposed here suggests that high molecular weight styrene–α-methylstyrene copolymers can be produced at reasonable rates at 60°C by emulsion polymerization. This is shown to be the case.     

Perfluoromethacrylate-styrene statistical copolymers synthesized in CO2-expanded monomers

Statistical copolymers of perfluoroalkyl ethyl methacrylate (Zonyl-TM) and styrene (S) were synthesized in CO₂-expanded monomer medium at a low initial pressure of 25 MPa. Different Zonyl-TM/S feed ratios were used during copolymerizations, and it was determined that the increase in the Zonyl-TM content and decrease of the CO₂ amount in the comonomer feed resulted in a decrease of the molecular weights of copolymers due to earlier precipitation of copolymers giving shorter chains. The cloudy CO₂-expanded liquid monomer phase was found to be the main loci of copolymerization. In addition, the increase in the Zonyl-TM feed ratio resulted in an increase in the critical degree of the polymerization time (J _crit) as the time when the copolymer chains start to precipitate. The higher the Zonyl-TM content used in the feed, the higher the J _crit time and the lower the weight-average molecular weight (M _w) of the copolymer obtained. Thermal analysis results of the copolymer indicated that the copolymers are stable up to 387–403 °C.     

Grafting of poly(styrene‐co‐p‐chloromethyl styrene) with ethyl methacrylate via atom transfer radical polymerization catalyzed by CuCl/1,2‐dipiperidinoethane

Poly(styrene‐graft‐ethyl methacrylate) graft copolymer was prepared by atom transfer radical polymerization (ATRP) with poly(styrene‐co‐p‐chloromethyl styrene)s in various compositions as macroinitiator in the presence of CuCl/1,2‐dipiperidinoethane at 130 °C in N,N‐dimethylformamide. Both macroinitiators and graft copolymers were characterized by elemental analysis, IR, ¹H and ¹³C NMR, and differential scanning calorimetry. 1,2‐Dipiperidinoethane was an effective ligand of CuCl for ATRP in the graft copolymerization. The controlled growth of the side chain provided the graft copolymers with polydispersities of 1.60–2.05 in the case of poly(styrene‐co‐p‐chloromethyl styrene) (62:38) macroinitiator. Thermal stabilities of poly(styrene‐graft‐ethyl methacrylate) graft copolymers were investigated by thermogravimetric analysis as compared with those of the macroinitiators. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 668–673, 2003     

Atom transfer radical copolymerization of acrylonitrile and ethyl methacrylate at ambient temperature

Copolymerization of acrylonitrile (AN) and ethyl methacrylate (EMA) using copper‐based atom transfer radical polymerization (ATRP) at ambient temperature (30 °C) using various initiators has been investigated with the aim of achieving control over molecular weight distribution. The effect of variation of concentration of the initiator, ligand, catalyst, and temperature on the molecular weight distribution and kinetics were investigated. No polymerization at ambient temperature was observed with N,N,N′,N′,N″‐pentamethyldiethylenetriamine (PMDETA) ligand. The rate of polymerization exhibited 0.86 order dependence with respect to 2‐bromopropionitrile (BPN) initiator. The first‐order kinetics was observed using BPN as initiator, while curvature in first‐order kinetic plot was obtained for ethyl 2‐bromoisobutyrate (EBiB) and methyl 2‐bromopropionate (MBP), indicating that termination was taking place. Successful polymerization was also achieved with catalyst concentrations of 25 and 10% relative to initiator without loss of control over polymerization. The optimum [bpy]₀/[CuBr]₀ molar ratio for the copolymerization of AN and EMA through ATRP was found to be 3/1. For three different in‐feed ratios, the variation of copolymer composition (F_AN) with conversion indicated toward the synthesis of copolymers having slight changes in composition with conversion. The high chain‐end functionality of the synthesized AN‐EMA copolymers was verified by further chain extension with methyl acrylate and styrene. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1975–1984, 2006     

Novel copolymers of styrene. 5. Alkyl and alkoxy ring-disubstituted propyl 2-cyano-3-phenyl-2-propenoates

Novel trisubstituted ethylenes, alkyl and alkoxy ring-disubstituted propyl 2-cyano-3-phenyl-2-propenoates, RPhCH?C(CN)CO₂C₃H₇ (where R is 2,3-dimethyl, 2,5-dimethyl, 2,6-dimethyl, 3,4-dimethyl, 2,3-dimethoxy, 2,4-dimethoxy, 2,5-dimethoxy, 2,6-dimethoxy 3,4-dimethoxy, 3,5-dimethoxy) were prepared and copolymerized with styrene. The monomers were synthesized by the piperidine catalyzed Knoevenagel condensation of ring-substituted benzaldehydes and propyl cyanoacetate and characterized by CHN elemental analysis, IR, ¹H- and ¹³C-NMR. All the ethylenes were copolymerized with styrene (M₁) in solution with radical initiation (ABCN) at 70°C. The composition of the copolymers was calculated from nitrogen analysis, and the structures were analyzed by IR, ¹H and ¹³C-NMR, GPC, DSC, and TGA. Decomposition of the copolymers in nitrogen occurred in two steps, first in the 200–500°C range with residue (0.6–5.0% wt.), which then decomposed in the 500–800°C range.     

Novel Copolymers of Trisubstituted Ethylenes and Styrene. 7. Dihalogen Ring-Substituted Ethyl 2-Cyano-1-oxo-3-phenyl-2-propenylcarbamates

Electrophilic trisubstituted ethylenes, dihalogen ring-substituted ethyl 2-cyano-1-oxo-3-phenyl-2-propenylcarbamates, RC₆H₃ CH = C(CN)CONHCO₂C₂H₅(where R is 2,3-diCl, 2,4-diCl, 2,6-diCl, 3,4-diCl, 3,5-diCl, and 2-Cl-6-F, were prepared and copolymerized with styrene. The monomers were synthesized by the piperidine catalyzed Knoevenagel condensation of ring-substituted benzaldehydes and N-cyanoacetylurethane, and characterized by CHN analysis, IR, ¹H- and ¹³C-NMR. All the ethylenes were copolymerized with styrene (M₁) in solution with radical initiation (ABCN) at 70°C. The compositions of the copolymers were calculated from nitrogen analysis and the structures were analyzed by IR, ¹H- and ¹³C-NMR. The order of relative reactivity (1/r ₁) for the monomers 2,4-diCl (4.4) > 2,6-diCl (3.6) > 2,3-diCl (3.4) = 3,4-diCl (3.4) > 2-Cl-6-F (2.7) > 3,5-diCl (2.0). High T _g of the copolymers in comparison with that of polystyrene indicates decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene structural unit. Decomposition of the copolymers in nitrogen occurred in two steps, first in 270–420°C with residue (5–13% wt), which then decomposed in the 420–650°C range.