CdSe Quantum Dots Based Electrochemiluminescence Immunosensor with Simple Structure for Ultrasensitive Detection of Salbutamol

A rapid and ultrasensitive electrochemiluminescence (ECL) competitive immunoassay based on CdSe quantum dots (QDs) and the shorter chain as possible (cysteamine and glutaraldehyde) has been designed for the detection of salbutamol (SAL). Cysteamine and glutaraldehyde made coating antigen immobilize well on the gold electrode surface through the reaction between functional groups, which brought about the simplicity of the immunosensor to some extent. Transmission electron microscopy image, dynamic light scattering, photoluminescence, ultraviolet‐visible absorption and electrochemical impedance spectra were used to characterize the prepared CdSe QDs and the cysteamine/glutaraldehyde/Ovalbumin‐SAL/anti‐SAL‐QDs immunosensor. In the air‐saturated PBS buffer containing 0.1 M K₂S₂O₈ and 0.1 M KCl (pH 9.0), a strong ECL emission of QDs can be observed which depended linearly on the logarithm of the salbutamol concentration with a wide range from 0.05 ng mL^?1 to 100 ng mL^?1, and a detection limit of 0.0056 ng mL^?1. The sensitivity, repeatability, and specificity of the ECL immunosensor have been evaluated. The sensor has been applied to real samples with satisfactory results. This work will open new ways of detecting food additive residue based on QDs ECL in immunoassays.     

Electochemiluminescence of CdTe/CdS Quantum Dots with Triproprylamine as Coreactant in Aqueous Solution at a Lower Potential and Its Application for Highly Sensitive and Selective Detection of Cu2+

Anodic electrochemiluminescence (ECL) of 3‐mercaptopropionic acid (MPA)‐ capped CdTe/CdS core‐shell quantum dots (QDs) with tripropylamine (TPrA) as the co‐reactant were studied in aqueous (Tris buffer) solution for the first time. The results suggest that the oxidation of TPrA at a glassy carbon electrode (GCE) surface participated in the ECL of QDs, and the onset potential and the intensity of ECL of CdTe/CdS QDs were affected seriously by TPrA, as the co‐reactant, in Tris buffer solution. The onset potential of ECL in this new system was about +0.5 V (vs. Ag/AgCl) and the ECL intensity greatly enhanced when TPrA was present. Various influencing factors, such as the electrolyte, pH, QDs concentration, potential range and scan rates on the ECL were studied. Based on the selective quenching by Cu²⁺ to the light emission from CdTe/CdS QDs/TPrA system, a highly sensitive and selective method for the determination of Cu²⁺ was developed. At the optimal conditions, the relative ECL intensity, I₀/I, was proportional to the concentration of Cu²⁺ from 14 nM to 0.21 μM with the detection limit of 6.1 nM based on the signal‐to‐noise ratio of 3. The possible ECL mechanism of QDs and the quenching mechanism of ECL were proposed.     

Tunable electrochemiluminescence of CdSe@ZnSe quantum dots by adjusting ZnSe shell thickness

CdSe quantum dots as cores capped with ZnSe shell (CdSe@ZnSe QDs) via a facile and eco-friendly strategy have been synthesized in aqueous solution for the first time. The electrochemiluminescence (ECL) of CdSe@ZnSe QDs was greatly enhanced compared to that of CdSe QDs. In particular, the ECL properties of the resulting CdSe@ZnSe QDs were found to be controllable by adjusting the thickness of ZnSe shells. Benefiting from the enhanced ECL intensity, the sensor based on CdSe@ZnSe QDs could accurately quantify dopamine from 10.0 nM to 3.0 μM with a detection limit of 3.6 nM.     

Optimized Synthesis and Fluorescence Spectrum Analysis of CdSe Quantum Dots

An optimized synthesis route was applied for controlling the preparation of CdSe quantum dots (QDs) in an aqueous solution. Some key factors which influencing the properties of CdSe QDs, such as initial pH, stabilizers, ratio of precursor, etc. were investigated. The size, shape, crystal structure, and optical property of CdSe QDs were also characterized by TEM, XRD, UV-Vis, and fluorescence (FL) spectra. The result showed that high-quality cubic CdSe QDs with 3 nm were obtained. The experiments also confirmed that thioglycolic acid (TGA), under the conditions of weak acid, is a better stabilizer than others. The ratio of [Cd²⁺] to [SeSO₃ ^2?] played an important role in the formation of CdSe QDs. The mechanisms about the influence factors were also presented.     

Separation and quantification of quantum dots and dissolved metal cations by size exclusion chromatography–ICP-MS

The prevalence of engineered metallic nanoparticles within electronic products has evoked a need to assess their occurrence and fate within environmental systems upon potential release of these nanoparticles. Quantum dots (QDs) are mixed-metal nanocrystals with the smallest of particle sizes (2–10 nm) that readily leach heavy metal cations in water, potentially creating a co-occurrence of nanoparticulate and dissolved metal pollutants. In this report, we develop a size exclusion chromatography–inductively coupled plasma–mass spectrometry method (SEC-ICP-MS) for the rapid separation and quantification of ~5-nm-sized CdSe/ZnS QDs and dissolved Cd²⁺ and Zn²⁺ cations in water. The SEC-ICP-MS method provided a wide chromatographic separation of CdSe/ZnS QDs and dissolved Cd²⁺ and Zn²⁺ cations only when using the smallest SEC column pore size available and an eluent composition that prevented loss of metals to column polymer surfaces by using a surfactant to ensure elution of QDs (ammonium lauryl sulfate) and a complexing ligand to ensure elution of metal cations (ethylenediaminetetraacetate). Detection limits were between 0.2 and 2 µg L^–1 for Cd²⁺ and Zn²⁺ among dissolved cation and QD phases, and ranges of linearity covered two to three orders of magnitude. Gold nanoparticles of sizes 5, 10, 20 and 50 nm were also effectively separated from dissolved Au³⁺ cations, illustrating the method applicability to a wide range of nanoparticle sizes and compositions. QD and dissolved metal concentrations measured by SEC-ICP-MS were comparable to those measured using the more conventional method of centrifuge ultrafiltration on split samples for dissolved and total metals. The applicability of the SEC-ICP-MS method to environmental systems was verified by measuring QDs and dissolved metals added to samples of natural waters. The method was also applied to monitoring CdSe/ZnS dissolution kinetics in an urban river water. The SEC-ICP-MS developed here may offer improved automation for characterising heterogeneous suspensions containing >1 µg L^–1 heavy metals.     

基于血红蛋白/硒化镉量子点多层膜的H2O2生物传感器

合成了水溶性硒化镉(CdSe)量子点,利用组装技术和静电吸附作用,将带正电荷的血红蛋白(Hb)和带负电荷的CdSe量子点层层组装到壳聚糖(chit)修饰的玻碳电极(GCE)表面,构建基于{Hb/CdSe}n多层膜的无电子媒介体的电流型生物传感器({Hb/CdSe}3/chit/GCE).运用紫外-可见吸收光谱、电致化学发光、交流阻抗和循环伏安技术来表征修饰膜,并研究传感器的作用机理、性能及分析应用.结果表明:与量子点薄膜法及量子点/血红蛋白复合物法等固载血红蛋白的其他方法相比,层层组装法能显著提高血红蛋白的固定量,保持血红蛋白的生物活性,增强传感器的灵敏度和稳定性.传感器检测H2O2的线性范围为4.0×10-8～4.8×10-6 mol·L-1(r=0.999 1),检测限为2.0×10-8mol·L-l.多层膜的电致化学发光研究,表明修饰电极有望用于电致化学发光传感器的制备.     

Photoluminescence property of a novel inorganic-organic red emitting phosphor based on Mg/Al/Eu layered double hydroxide

A novel inorganic-organic red light emitting phosphor was synthesized by intercalating a sensitizer anion, terephthalate into Mg/Al/Eu layered double hydroxides through an ion exchange method. The basal spacing is 13.9 Å, indicating that a vertical arrangement of terephthalate anions within the gallery is adopted. This material displays much enhanced red luminescence from Eu³⁺ ions, suggesting that there is an efficient energy transfer from the excited state of the intercalated terephthalate anions to Eu³⁺ centres in the host layers. The optimal doping concentration of Eu³⁺ is 10 mol %.     

Highly Sensitive Electrochemiluminescence Detection of Mercury(II) Ions Based on DNA‐Linked Luminol‐Au NPs Superstructure

A novel highly sensitive electrochemiluminescence (ECL) detection protocol for mercury(II) ions was developed. Based on the strong and stable thymine? thymine mismatches complexes coordination chemistry, mercury(II) ions can specifically bind to a designed DNA strand, leading to the release of the complimentary DNA strand. The released DNA strand was then captured by magnetic beads modified with specific DNA, and then through the formation of DNA‐linked luminol‐Au nanoparticles (NPs) superstructure, a specific ECL system for mercury(II) ions was developed. Using 3‐aminopropyl‐triethoxysilane as an effective enhancer, the ECL system can detect Hg²⁺ ion within a linear range from 2.0×10^?10 mol L^?1 to 2.0×10^?8 M, with a detection limit as low as 1.05×10^?10 M (3σ). Moreover, this ECL system is highly specific for Hg²⁺, without interference from other commonly coexisted metal ions, and it can be used for the analysis of real samples.     

Ultrasensitive determination of 2,4,6-trinitrotoluene by exploiting the strongly enhanced electrochemiluminescence of an assembly between CdSe and graphene quantum dots and its quenching by TNT

The authors describe an electrochemiluminescence (ECL) assay for the determination of 2,4,6-trinitrotoluene (TNT) in soil. It is based on the finding that graphene quantum dots (GQDs) strongly enhance the ECL of CdSe quantum dots (CdSe QDs), and ECL is strongly quenched by TNT. In order to assemble the GQDs and CdSe QDs, the latter were functionalized with carboxy groups and then coupled to amino-functionalized GQDs (afGQDs). The resulting CdSe-GQDs conjugation was placed as a thin film on a glassy carbon electrode (GCE). The modified electrode displays an about 8-fold enhanced ECL intensity compared to an GCE with CdSe QDs only, and the onset potential of the ECL reaction is positively shifted by 140 mV. In the presence of TNT, the ECL is quenched due to the formation of the TNT-amine complex. The decrease in ECL intensity is related to the logarithm of the TNT concentration in the range from 0.01 to 100 ppb, with a detection limit as low as 3 ppt. The results of TNT assays in (spiked) soil samples showed recoveries between 99.2 and 105.0 % and relative standard deviations between 3.0 and 8.2 %. This strategy offers a new perspective for developing ECL assays based on the use of semiconductor nanoparticles and graphene-based nanomaterials.

Open image in new window

Graphical abstract A electrochemiluminescence (ECL) assay was developed for the detection of 2,4,6-trinitrotoluene (TNT). The method utilizes a combination of CdSe and graphene quantum dots (GQDs), and a glassy carbon electrode modified with poly(diallyldimethylammonium chloride)-protected graphene. The assay is simple and displays acceptable reproducibility.

     

Electrochemiluminescence of CdSe Quantum Dots Composited with Nitrogen‐Doped Carbon Nanotubes

A nanocomposite of CdSe quantum dots with nitrogen‐doped carbon nanotubes was prepared for enhancing the electrochemiluminescent (ECL) emission of quantum dots. With hydrogen peroxide as co‐reactant, the nanocomposite modified electrode showed a cathodic ECL emission with a starting potential of ?0.97 V (vs. Ag/AgCl) in phosphate buffer solution, which was five‐times stronger than that from pure CdSe quantum dots and three‐times stronger than that from CdSe quantum dots composited with carbon nanotubes. The latter showed a starting potential of ?1.19 V. This result led to a sensitive ECL sensing of hydrogen peroxide with good stability, acceptable reproducibility and a detection limit down to 2.1×10^?7 mol L^?1. Nitrogen‐doped carbon nanotubes could be used as a good material for the construction of sensitive ECL biosensors for chemical and biochemical analysis.     

Rare earth ions-enhanced gold nanoclusters as fluorescent sensor array for the detection and discrimination of phosphate anions

The discrimination and detection of phosphate anions have attracted extensive attention due to their important roles in various biological processes. Compared with sensors to detect one individual phosphate at a time, sensor arrays are able to discriminate multiple phosphates simultaneously. In this study, we developed a rare earth ions enhanced AuNCs-based sensor array to achieve facile and rapid identification of phosphate anions (PPi, ADP and ATP). The rare earth ions (i. e., Ce³⁺, Gd³⁺, Tm³⁺ and Yb³⁺) can significantly enhance the fluorescence of AuNCs through aggregation-induced emission effect. And the subsequent addition of phosphate anions can recover the fluorescence of the AuNCs-rare earth ions assembly. Thanks to the different numbers of phosphate group and different steric hindrance effects of phosphate anions, the recovery fluorescence of AuNCs-rare earth ions assembly induced by PPi, ADP or ATP are respectively distinct. Thus the sensor array composed of AuNCs and different rare earth ions is able to distinguish those phosphate anions. Finally, the sensor array was successfully demonstrated to identify the phosphates in blind samples.     

Electrogenerated Chemiluminescence Ethanol Biosensor Based on Carbon Nanotube‐Titania‐Nafion Composite Film

Mesoporous titania‐Nafion composite doped with carbon nanotube (CNT) has been used for the immobilization of tris(2,2′‐bipyridyl)ruthenium(II) (Ru(bpy)₃²⁺) and alcohol dehydrogenase on an electrode surface to yield a highly sensitive and stable electrogenerated chemiluminescence (ECL) ethanol biosensor. The presence of CNT in the composite film increases not only the sensitivity of the ECL biosensor but also the long‐term stability of the biosensor. The present biosensor responds linearly to ethanol in the wide concentration ranges from 1.0×10^?5 M to 1.0×10^?1 M with a detection limit of 5.0×10^?6 M (S/N=3). The present ECL ethanol biosensor exhibited higher ECL response compared to that obtained with the ECL biosensor based on the corresponding composite without CNT. The present CNT‐based ECL biosensor showed good long‐term stability with 75% of its initial activity retained after 2 weeks of storage in 50 mM phosphate buffer at pH 7.0.     

Highly sensitive electrochemiluminescence “turn-on” aptamer sensor for lead(II) ion based on the formation of a G-quadruplex on a graphene and gold nanoparticles modified electrode

We have developed a “turn on” model of an electrochemiluminescence (ECL) based assay for lead ions. It is based on the formation of a G-quadruplex from an aptamer labeled with quantum dots (QDs) and placed on an electrode modified with of graphene and gold nanoparticles (AuNPs). A hairpin capture probe was labeled with a thiol group at the 5′-end and with an amino group at the 3′-end. It was then self-assembled on the electrode modified with graphene and AuNPs. In the absence of Pb(II), the amino tag on one end of the hairpin probe is close to the surface of the electrode and therefore unable to interact with the QDs because of steric hindrance. The ECL signal is quite weak in this case. If, however, Pb(II) is added, the stem-loop of the aptamer unfolds to form a G-quadruplex. The amino group at the 3′-end will become exposed and can covalently link to a carboxy group on the surface of the CdTe QDs. This leads to strong ECL. Its intensity increases (“turns on”) with the concentration of Pb(II). Such a “turn-on” method does not suffer from the drawbacks of “turn-off” methods. ECL intensity is linearly related to the concentration of Pb(II) in the 10 p mol·L^?1 to 1 n mol·L^?1 range, with a 3.8 p mol·L^?1 detection limit. The sensor exhibits very low detection limits, good selectivity, satisfying stability, and good repeatability.

Luminescent CdSe-ZnS quantum dots as selective Cu2+ probe

Luminescent CdSe-ZnS quantum dots (QDs) were modified with bovine serum albumin (BSA) and used as selective copper ion probe. The fluorescence of the water-soluble QDs can be quenched only by Cu²⁺ and Fe³⁺ in physiological buffer solution. Approximate concentrations of other physiologically important cations, such as Zn²⁺, Na⁺ and K⁺ etc. have no effect on the fluorescence. Adding F⁻ to form the colorless complex FeF₆³⁻ can eliminate the interference of Fe³⁺. The detection limit of Cu²⁺ ions was 10 nM. The results can be explained in terms of strong binding of Cu²⁺ onto the surface of CdSe resulting in a chemical displacement of Cd²⁺ ions and the formation of CuSe on the surface of the QDs.     

Effect of SnO2 Nanocrystals on the Emission of Eu3+ Ions in Silica Matrix

Silica xerogels containing Eu³⁺ ions and SnO₂ nanocrystals were prepared in the sol‐gel process, and characterized by x‐ray diffraction (XRD) and photoluminescence spectra. Under the excitation at 393 nm, characteristic emission of Eu³⁺ ions at 614 nm was enhanced with increasing amount of SnO₂ nanocrystals. Moreover, when the Eu³⁺/SnO₂ co‐doped samples were excited at 345 nm, corresponding to the sideband of SnO₂ nanocrystals, the emission of Eu³⁺ ions at 614 nm was clearly observed, while no emission of Eu³⁺ ions for the Eu³⁺‐doped sample. It may be ascribed to the energy transfer from SnO₂ conduction band to Eu³⁺ conduction band. Further experimental results suggest that the energy transfer may be achieved through surface transition state.     

Pore-functionalized polymer membranes for preconcentration of heavy metal ions

Functionalized membranes containing carboxylate, phosphate and sulfonate groups were prepared by UV-initiator induced graft polymerization of the functional monomer (acrylic acid, ethylene glycol methacrylate phosphate (EGMP) and 2-acrylamido-2-methyl-1-propane sulfonic acid) with a crosslinker (methylenebisacrylamide) in the pores of poly(propylene) host membranes. The functionalized membranes thus obtained were characterized by gravimetry, FTIR spectroscopy, radiotracers and scanning electron microscopy for the degree of grafting and water uptake, presence of functional groups, ion-exchange capacity, and physical structure of the membranes, respectively. The uptakes of Cs⁺, Ag⁺, Sr²⁺, Cd²⁺, Hg²⁺, Zn²⁺, Eu³⁺, Am³⁺, Hf⁴⁺ and Pu⁴⁺ ions in the functionalized membranes were studied as a function of acidity of the equilibrating aqueous solution. Among the functionalized membranes prepared in the present work, the EGMP-grafted membrane (with phosphate groups) showed acid concentration dependent selectivity towards multivalent metal ions like Eu³⁺, Am³⁺, Hf⁴⁺ and Pu⁴⁺. The solvent extraction studies of EGMP monomer in methyl isobutyl ketone (MIBK) solvent indicated that divalent and trivalent metal ions form complexes with EGMP in 1:2 proportion, but the distribution coefficients of trivalent metal ions were significantly higher that for the divalent ions. The uptakes of Eu³⁺ ions in monomeric EGMP (dissolved in MIBK) and polymeric EGMP (in the forms of crosslinked gel and membrane) were studied as a function of concentration of H⁺ ions in the equilibrating solution. This study indicated that polymeric EGMP has better binding ability towards Eu³⁺ as compared to monomeric EGMP. The variation of distribution coefficients of Eu³⁺/Am³⁺ in gel and membrane as a function of H⁺ ion concentration in the equilibrating aqueous solution indicated that ionic species held in the membrane and gel were not same. These results indicated that proximity of functional groups (phosphate) plays an important role in metal ion binding with polymeric EGMP.     

Determination of Reduced Nicotinamide Adenine Dinucleotide Based on Immobilization of Tris(2,2′‐bipyridyl) Ruthenium(II) in Multiwall Carbon Nanotubes/Nafion Composite Membrane

Abstract

An electrochemiluminescence (ECL) method for reduced nicotinamide adenine dinucleotide (NADH) was proposed by immobilizing tris(2,2′‐bipyridyl) ruthenium(II) (Ru(bpy)₃ ²⁺) in multiwall carbon nanotubes (MWCNTs)/Nafion composite membrane that was formed on glassy carbon electrode surface. The electrochemical and ECL behaviors of the immobilized Ru(bpy)₃ ²⁺ were investigated. The cyclic votammogram of the modified electrode in pH 7.0 phosphate buffer solution showed a couple of redox peaks at +1190 and +1060 mV at 100 mV/s. The composite film had a more open structure and a large surface area allowing faster diffusion of Ru(bpy)₃ ²⁺. The presence of MWCNTs resulted in the improved ECL sensitivity and longer‐term stability of the modified electrode. The modified electrode showed a linear response to NADH in the concentration range of 1.0×10^?6 to 1.6×10^?5 M with a detection limit of 8.2×10^?7 M.     

Sensitive and selective determination of Cu2+ by electrochemiluminescence of CdTe quantum dots

For the first time, we report a sensitive and selective method to detect Cu²⁺ based on the electrochemiluminescence quenching of CdTe quantum dots (QDs) in aqueous solution. The mercaptosuccinic acid (MSA) protected CdTe QDs were prepared and characterized with UV, fluorescence and ECL. The anodic ECL quenching mechanism was attributed to the fact that MSA capping was removed from the surface of the CdTe QDs and preferentially bound with Cu²⁺. The displacement of MSA capping layer created imperfections on the CdTe QDs surface, and eventually led to the ECL quenching. The quenching effect of Cu²⁺ on the anodic ECL of CdTe QDs was found to be selective and concentration dependent, so we applied it to develop a method for the sensitive and selective detection of Cu²⁺. With the proposed method, the concentration of Cu²⁺ could be detected in the range of sub-nanomolar to micromolar levels.     

L-Cysteine-coated CdSe/CdS core-shell quantum dots as selective fluorescence probe for copper(II) determination

Quantum dots (QDs) or semiconductor nanocrystals have been receiving great interest in the last few years. In this paper, L-cysteine-coated CdSe/CdS core-shell QDs (λ_em = 585 nm) have been prepared, which have excellent water-solubility. The full width at half maximum (FWHM) of the photoluminescence of these nanocrystals is very narrow (about 30 nm), and the quantum yield (QY) is 15% relative to Rhodamine 6G in ethanol (QY = 95%). With excess free L-cysteine in the solution, the fluorescence intensity of L-cysteine-coated CdSe/CdS QDs showed improved stability. It was found that the fluorescence of L-cysteine-capped CdSe/CdS QDs could be quenched only by copper (II) ions and was insensitive to other physiologically important cations, such as Ca²⁺, Mg²⁺, Zn²⁺, Al³⁺, Fe³⁺, Mn²⁺ and Ni²⁺ etc. Based on this finding, the quantitative analysis of Cu²⁺ with L-cysteine-capped CdSe/CdS QDs has been established. The linear range was from 1.0 × 10^− 8 to 2.0 × 10^− 7 mol L^− 1 and the limit of detection (LOD) was 3.0 × 10^− 9 mol L^− 1 (S/N = 3). The proposed method has first been applied to the determination of Cu²⁺ in vegetable samples with recoveries of 99.6–105.8%.     

Effects of Divalent Metal Ions on Electrochemiluminescence Sensor with Ru(bpy)32+ Immobilized in Eastman‐AQ Membrane

Different effects of divalent metal ions on electrochemiluminescence (ECL) sensor with Ru(bpy)₃²⁺ immobilized in Eastman‐AQ membrane were investigated. Mg²⁺, Ca²⁺ and Fe²⁺ can elevate the ECL of Ru(bpy)₃²⁺/proline; while metal ions that underwent redox reactions on the electrode such as Mn²⁺ and Co²⁺ presented intensive quenching effects on Ru(bpy)₃²⁺ ECL. Also, the quenching effect of Mn²⁺ on the ECL sensor with Ru(bpy)₃²⁺ immobilized in Eastman‐AQ membrane enhanced to about 30‐folds compared with the case that Ru(bpy)₃²⁺ was dissolved in phosphate buffer, and the enhanced quenching effects of Mn²⁺ were studied.