血红蛋白-Fe3O4-CaCO3三维生物纳米复合材料的特性及在生物传感中的应用

通过层层自组装的方法,在中性条件下利用静电作用将Fe3O4纳米粒子组装到修饰了高分子聚电解质的CaCO3多孔微米球上。该复合材料具有好的生物相容性、导电性、磁性和稳定性。将血红蛋白酶固定到该复合材料上,进而制备得到血红蛋白(Hb)-Fe3O4-CaO3复合物修饰玻碳电极,并在该修饰电极上实现了Hb与电极之间的直接电化学。该生物传感器对H2O2的还原具有较好的响应,线性范围为3.0×10-6~5.3×10-5 mol/L,检测限为8.9×10-7 mol/L。     

基于聚亚甲基蓝-碳纳米管复合膜固载血红蛋白的H2O2生物传感器

采用吸附和电化学聚合修饰方法,制得了聚亚甲基蓝-碳纳米管聚合膜玻碳电极(PMB-MWNTs/GCE),再将血红蛋白(Hb)固定在PMB-MwNTs/GCE表面,制备了稳定的Hb/PMB-MwNTs//GCE的H2O2生物传感器,并用循环伏安法对修饰电极的生物电催化行为进行了表征.研究结果表明,固定在PMB-MWNTs/...     

基于层层静电吸附天青Ⅰ和纳米金固定过氧化物酶生物传感器的研究

在玻碳电极(GCE)上,构造了一种以对氨基苯磺酸电聚合膜(PABSA)为基底,利用层层静电自组装技术固定多层天青Ⅰ(AI)和纳米金(nano-Au)制备的复合薄膜(nano-Au/AI)n,然后通过静电吸附辣根过氧化物酶(HRP)制得过氧化氢生物传感器[HRP/(nano-Au/AI)n/PABSA/GCE].采用循环伏安法和计时电流法考察了该传感器的电化学性质,并且研究了该修饰电极对H2O2的催化还原作用.在优化的实验条件下,该传感器的响应电流与其浓度在3.5×10-6～3.6×10-3 mol/L范围内呈现良好的线性关系,检出限为1.2×10-6 mol/L.该传感器的米氏常数为1.5 mmol/L,表明所固定的酶具有较高的生物活性.     

血红蛋白和SiO2凝胶层层组装膜在碳纳米管/金纳米粒子修饰电极界面上的直接电化学及电催化研究

以SiO2凝胶膜和蛋白质交互组装法固定血红蛋白(Hb), 对其进行了电化学和电催化研究. 首先制备碳纳米管/金纳米粒子复合材料修饰的MWNTs-Au/GC电极, 为防止蛋白质在电极表面流失, 将Hb和自制的SiO2凝胶膜交替滴涂到电极表面, 得到SiO2/Hb层层组装膜修饰电极, 即{SiO2/Hb}n/MWNTs-Au/GC电极, n=2为优化层数. Hb在{SiO2/Hb}2/MWNTs-Au/GC电极上仍能保持其特有的生物活性, 并能与电极进行稳定快速的电子直接转移, 同时表现出过氧化物酶特性, 对H2O2具有良好的生物电催化还原能力.     

纳米金/三聚氰胺修饰电极检测亚硝酸盐

采用电聚合方法制备三聚氰胺(MA)膜修饰玻碳电极(GCE),然后采用原位恒电位沉积法制备金纳米颗粒(Au),并将其修饰于膜电极表面,制得纳米金/三聚氰胺修饰玻碳电极(Au/MA/GCE)。用扫描电子显微镜(SEM)对修饰电极进行表面形貌和元素成分分析。用循环伏安法研究亚硝酸根(NO2-)在该修饰电极上的电化学行为发现,NO2-在0.85 V出现一灵敏的氧化峰。在优化的实验条件下,NO2-在1.0×10-5～1.0×10-3mol/L浓度范围内与其氧化峰电流成线性关系,检测下限为8.9×10-7mol/L。将修饰电极用于实际样品中NO2-的检测,效果良好。     

CdTe量子点修布电极的阳极电致化学发光

制备了CdTe量子点/Nafion修饰玻碳电极(CdTe QDs/Nafion/GCE),并研究了该修饰电极在中性磷酸盐缓冲溶液(PBS)中的电致化学发光(ECL)行为.结果表明,三丙胺(TPA)作为共反应剂存在时,QDs/Nafion/GCE在中性PBS中可以产生强的阳极电化学发光信号.考察了量子点的用量、Nafion的用量、pH、电解质等条件对ECL的影响.抗坏血酸对QDs/Nafion/GCE的ECL具有抑制作用,且抑制程度与抗坏血酸浓度呈线性关系,为利用电致化学发光法检测抗坏血酸提供了新方法.     

二茂铁巯基化合物/金纳米粒子/还原石墨烯修饰电化学传感器检测Cu~(2+)

通过Hummer法进一步还原合成还原石墨烯(RGO),Shifft碱反应合成新型二茂铁巯基化合物(FcSH)。利用还原石墨烯吸附性将石墨烯修饰在玻碳电极(GCE)上,在石墨烯表面电沉积金纳米粒子(AuNPs),通过自组装制备还原石墨烯和二茂铁巯基修饰电化学传感器(FcSH/AuNPs/RGO/GCE),该电化学传感器具有大的比表面积和富电子性能。实验显示,在0.01 mol/L HCl中,富集时间为180s,Cu~(2+)浓度在1.0×10~(-12)~1.0×10~(-11)mol/L与1.0×10~(-11)~1.0×10~(-10)mol/L范围内与方波伏安峰电流分别呈现良好的线性关系,检出限为0.94×10~(-12)mol/L。该电化学传感器对Cu~(2+)的检测表现出较好的选择性、高的稳定性和灵敏性,可用于环境中痕量Cu~(2+)的测定。     

CdTe量子点修饰电极的阳极电致化学发光

制备了CdTe量子点/Nafion修饰玻碳电极(CdTe QDs/Nafion/GCE),并研究了该修饰电极在中性磷酸盐缓冲溶液(PBS)中的电致化学发光(ECL)行为。结果表明,三丙胺(TPA)作为共反应剂存在时,QDs/Nafion/GCE在中性PBS中可以产生强的阳极电化学发光信号。考察了量子点的用量、Nafion的用量、pH、电解质等条件对ECL的影响。抗坏血酸对QDs/Nafion/GCE的ECL具有抑制作用,且抑制程度与抗坏血酸浓度呈线性关系,为利用电致化学发光法检测抗坏血酸提供了新方法。     

桑色素/石墨烯修饰电极的制备及对多巴胺的选择性灵敏测定

在石墨烯纳米片修饰电极(GN/GCE)上,通过电聚合的方法制备了新颖的桑色素/石墨烯复合修饰电极(M/GN/GCE).以多巴胺(DA)和抗坏血酸(AA)为模型化合物,运用循环伏安法(CV)和差示脉冲伏安法(DPV)考察了该复合修饰电极的电催化行为.在pH 7.0的PBS中,DA和AA分别在0.172 V和-0.183 V产生氧化峰,峰位差达355 mV.与单一修饰电极(桑色素修饰电极(M/GCE)、石墨烯修饰电极(GN/GCE)及裸玻碳电极(GCE))相比,DA在M/GN/GCE上的峰电流显著增大.在优化的实验条件下,DA在2.0×l0-8～5.5×10-4 mol/L浓度范围内与其峰电流具有良好的线性关系,检出限达9.0×10-9 mol/L.     

盐酸氯丙嗪-联吡啶钌体系在多壁碳纳米管修饰电极上的电化学发光行为研究及盐酸氯丙嗪的测定

在玻碳电极上成功制备了多壁碳纳米管修饰电极(MWCNTs/GCE),优化了该修饰电极的制备条件.研究了联吡啶钌和盐酸氯丙嗪在该修饰电极上的电化学行为和电化学发光行为,建立了电化学发光法测定尿液中盐酸氯丙嗪的分析方法.结果表明,联吡啶钌-氯丙嗪体系在MWCNTs/GCE上表现出很好的电化学活性和电致化学发光响应,多壁碳纳米管不但增大了玻碳电极的比表面积而且加快了联吡啶钌在电极表面的电化学氧化,对联吡啶钌的电化学发光强度具有明显的增敏作用,同时盐酸氯丙嗪对联吡啶钌在该修饰电极上的电致化学发光具有很强的增敏作用.在0.1 mol/L的磷酸盐(pH 7.5)缓冲溶液中,盐酸氯丙嗪在该修饰电极上的检出限(S/N=3)为6.0×10-7 mol/L,在1.0×10-6 ～4.0×10-4 mol/L范围内浓度与相对发光强度呈线性关系(r=0.995 2).连续测定6.0×10-5 mol/L的盐酸氯丙嗪溶液13次,发光强度的RSD值为2.50%,表明该修饰电极具有较好的重复性.该方法已经成功地应用于尿样的检测.     

Electrogenerated chemiluminescence and electrochemical bi-functional sensors for H2O2 based on CdS nanocrystals/hemoglobin multilayers

A novel bi-functional sensor, based on CdS nanocrystals (NCs) and hemoglobin (Hb) multilayer films, designated as {Hb/CdS}_n, modified glassy carbon electrode (GCE) by layer-by-layer (LbL) assembly, has been presented. The electrogenerated chemiluminescence (ECL) and electrochemical properties of {Hb/CdS}_n have been investigated in detail. Hb in the multilayer films can enhance the stability of electrogenerated species of CdS NCs, and CdS NCs can also promote the direct electron transfer between Hb and GCE. As a consequence experimentally, the multilayer films modified GCE is suitable to be used as a bi-functional sensor, ECL sensor and electrochemical sensor, to determine H₂O₂ in obviously different concentration. In high concentration of H₂O₂, this sensor as an ECL sensor shows a linear response from 15 μM up to 18 mM. In the lower concentration of H₂O₂, it as an amperometric one shows two linear ranges of amperometric responses to the concentration of H₂O₂ ranging from 6.0 to 31.0 μM and from 6.0 μM down to 40 nM with a detection limit of 20 nM, based on the high stability of ECL by {Hb/CdS}_n and the excellent electrocatalytical ability of Hb to H₂O₂. Thus, {CdS/Hb}_n modified electrodes would have a great merit to expand the application of biosensors to life science and environmental science.     

Fe3+和Fe2+对原代培养的成骨细胞增殖、分化和矿化功能的影响

采用噻唑蓝(MTT)法、碱性磷酸酶(ALP)比活性测定、油红O染色和茜素红染色及定量分析,研究了不同浓度的Fe3+和Fe2+对原代培养的成骨细胞增殖、分化及矿化功能的影响.结果表明:浓度为1×10-9～1×10-4 mol·L-1的Fe3+和Fe2+促进成骨细胞增殖,但是在较高浓度1×10-3 mol·L-1时,它们则抑制成骨细胞增殖.与成骨细胞作用48 h,浓度为1×10-8～1×10-4 mol·L-1的Fe3+和Fe2+抑制其分化,但在较低的浓度1×10-9 mol·L-1时则对其分化没有影响:进一步延长作用时间为72 h,Fe3+对成骨细胞分化没有影响,除1×10-6mol·L-1浓度的Fe2+促进成骨细胞分化外,其他浓度的Fe2+则抑制其分化;测试浓度下的Fe3+对成骨细胞向脂肪细胞的横向分化表现为抑制或没有影响,而Fe2+的影响则依赖于浓度和作用时间.在1×10-8～1×10-5mol·L-1浓度范围内,Fe3+和Fe2+对矿化结节的影响表现出相反的效应.在较高浓度(1×10-4mol·L-1)下,它们促进矿化节结的形成,而在较低浓度(1×10-9mol·L-1)下,Fe3+抑制矿化节结的形成,Fe2+则没有影响.结果提示:浓度.作用时间和铁离子的价态都是影响Fe3+和Fe2+生物效应(从毒性到活性,从损伤到保护,从上调到下调)转变的关键因素.     

Cu2+和Cu+对原代培养的小鼠成骨细胞增殖、分化和钙化的影响

利用噻唑蓝(MTT)法、碱性磷酸酶(ALP)比活性测定、油红O染色和矿化结节染色及定量分析,研究了Cu²⁺和Cu⁺对原代培养的成骨细胞增殖、分化及钙化的影响。结果显示：Cu²⁺(1×10^-9~1×10^-6 mol·L^-1)促进成骨细胞增殖,随时间延长,促进作用变弱。Cu⁺(1×10^-7~1×10^-5 mol·L^-1)抑制成骨细胞增殖,随时间延长,浓度为1×10^-6 mol·L^-1的Cu⁺为促进作用,其余浓度则没有影响。对于成骨细胞分化,Cu²⁺和Cu⁺表现出相似的影响,浓度为1×10^-9和1×10^-6 mol·L^-1时均促进成骨细胞分化,而当浓度为1×10^-7和1×10^-5 mol·L^-1时,则抑制成骨细胞分化,随作用时间延长,大多数浓度均表现为促进作用。测试浓度下的Cu²⁺和Cu⁺均对成骨细胞向脂肪细胞的横向分化表现为促进效应。对矿化功能的影响,1×10^-5 mol·L^-1的Cu²⁺和Cu⁺表现出显著的抑制效应,但随浓度降低,抑制效应变弱。1×10^-7 mol·L^-1的Cu²⁺ 促进成骨细胞矿化结节的形成。结果提示：作用浓度、作用时间及铜离子的价态都是影响Cu²⁺和Cu⁺生物效应转变(从毒性到活性,从损伤到保护,从下调到上调)的关键因素。     

Direct Electrochemistry and Electrocatalysis of Hemoglobin/ZnO‐Chitosan/nano‐Au Modified Glassy Carbon Electrode

The highly efficient H₂O₂ biosensor was fabricated on the basis of the complex films of hemoglobin (Hb), nano ZnO, chitosan (CHIT) dispersed solution and nano Au immobilized on glassy carbon electrode (GCE). Biocompatible ZnO‐CHIT composition provided a suitable microenvironment to keep Hb bioactivity (Michaelis‐Menten constant of 0.075 mmol L^?1). The presence of nano Au in matrix could effectively enhance electron transfer between Hb and electrode. The electrochemical behaviors and effects of solution pH values were carefully examined in this paper. The (ZnO‐CHIT)‐Au‐Hb/GCE demonstrated excellently electrocatalytical ability for H₂O₂. This biosensor had a fast response to H₂O₂ less than 4 s and excellent linear relationships were obtained in the concentration range from1.94×10^?7 to 1.73×10^?3 mol L^?1 with the detection limit of 9.7×10^?8 mol L^?1 (S/N=3) under the optimum conditions. Moreover, the stability and reproducibility of this biosensor were evaluated with satisfactory results.     

银-磷酸钛纳米复合膜的构建及其电化学生物传感

利用ITO基底上层层组装构建的多层内嵌银纳米粒子的磷酸钛薄膜固定了血红蛋白并且用于生物传感研究。由于银纳米粒子与磷酸钛膜的协同作用,实验中可以观察到Hb的直接电子传递。研究表明所制备的Hb-Ag-TiP/PDDA/ITO电极对H₂O₂响应迅速、稳定,检测限达3.3×10^-6 mol·L^-1。     

溶液法制备氧化锌半导体薄膜及其顶栅极晶体管器件

采用旋涂法用浓度分别为0.05,0.10和0.25 mol·L^-1的氧化锌前躯体溶液制备了氧化锌薄膜,并且制备了基于氧化锌多层膜的顶栅极晶体管器件,其中以利用光刻工艺刻蚀的氧化铟锡为源漏电极。通过原子力显微镜(AFM)和X-射线衍射(XRD)分别表征了薄膜的形貌以及结晶情况,并且讨论了前躯体的浓度顺序对氧化锌多层膜的影响。按照浓度从大到小的顺序依次旋涂前躯体溶液制备的氧化锌薄膜表现出了较高的载流子迁移率(7.1×10^-3 cm²·V^-1·s^-1),而按照浓度从小到大的顺序依次旋涂前躯体溶液制备的氧化锌薄膜的载流子迁移率为5.2×10^-3 cm²·V^-1·s^-1。文中通过对两种多层薄膜的形貌和结晶性能的分析表明影响顶栅极薄膜晶体管性能的主要因素是薄膜的粗糙度。平整的薄膜有利于形成较好的半导体层/绝缘层接触界面,从而有利于提高器件的载流子迁移率。     

Detection of trace nitrite in waters using a QDs-based chemiluminescence analysis system

In the present work, a novel flow-injection chemiluminescence method based on CdTe quantum dots (QDs) was developed for the determination of nitrite. Weak chemiluminescence (CL) signals were observed from a CdTe QDs–H₂O₂ system under basic conditions. The addition of a trace amount of hemoglobin (Hb) caused the CL from the CdTe QDs–H₂O₂ system to increase substantially. In the presence of nitrite, the ferrous Hb reacted with the nitrate to form ferric Hb and NO. The NO then bound to ferrous Hb to generate iron nitrosyl Hb. As a result, the CL signal from the CdTe QDs–H₂O₂–Hb system was quenched. Thus, a flow-injection CL analytical system for the determination of trace nitrite was established. Under optimum conditions, there was a good linear relationship between CL intensity and the concentration of nitrite in the range 1.0?×?10^?9 to 8.0?×?10^?7 mol L^?1 (R ²?=?0.9957). The limit of detection for nitrite using this system was 3.0?×?10^?10 mol L^?1 (S/N?=?3). This method was successfully applied to detect nitrite in water samples.

Direct Electrochemistry and Electrocatalysis of Hemoglobin Based on Nafion‐Room Temperature Ionic Liquids‐Multiwalled Carbon Nanotubes Composite Film

A robust and effective composite film combined the benefits of Nafion, room temperature ionic liquid (RTIL) and multi‐wall carbon nanotubes (MWNTs) was prepared. Hemoglobin (Hb) was successfully immobilized on glassy carbon electrode surface by entrapping in the composite film. Direct electrochemistry and electrocatalysis of immobilized Hb were investigated in detail. A pair of well‐defined and quasi‐reversible redox peaks of Hb was obtained in 0.10 mol·L^?1 pH 7.0 phosphate buffer solution (PBS), indicating that the Nafion‐RTIL‐MWNTs film showed an obvious promotion for the direct electron transfer between Hb and the underlying electrode. The immobilized Hb exhibited an excellent electrocatalytic activity towards the reduction of H₂O₂. The catalysis current was linear to H₂O₂ concentration in the range of 2.0×10^?6 to 2.5×10^?4 mol·L^?1, with a detection limit of 8.0×10^?7 mol·L^?1 (S/N=3). The apparent Michaelis‐Menten constant (K_m^app) was calculated to be 0.34 mmol·L^?1. Moreover, the modified electrode displayed a good stability and reproducibility. Based on the composite film, a third‐generation reagentless biosensor could be constructed for the determination of H₂O₂.     

普鲁士蓝/CdS纳米复合物电致化学发光及其H2O2传感应用

通过一定体积比的CdS和普鲁士蓝(PB)胶体纳米溶液的简单混合,制备了PB/CdS纳米复合物。在共反应剂存在条件下,PB纳米粒子含量较低时,在ITO电极上CdS纳晶的电致化学发光(ECL)强度可以增强3倍左右。PB纳米粒子含量较高时,CdS纳晶的ECL强度则显著降低。详细讨论了PB纳米粒子对CdS纳晶ECL影响的机理。PB纳米粒子对CdS纳晶的ECL增强可用于H2O2传感。该传感器对H2O2响应的线性范围为3.3×10-8～6.5×10-3 mol.L-1(R=0.999 2),检测限为12 nmol.L-1(S/N=3),传感器具有良好的稳定性和重现性。     

Electrodeposition CaCO3 Nanoparticles‐chitosan Composite Film on Carbon Ionic Liquid Electrode as a Platform for Hemoglobin Electrochemical Biosensor

By one‐step co‐electrodeposition CaCO₃ nanoparticles‐chitosan composite film on carbon ionic liquid electrode (CILE), and then by spreading the composition of hemoglobin (Hb) and chitosan on the nanoCaCO₃‐chi/CILE, a Hb‐chi/nanoCaCO₃‐chi/CILE was fabricated and the direct electrochemistry and electrocatalysis of Hb at the electrode was investigated. The electrochemical impedance spectroscopy of the modified electrode showed the electron transfer resistance was 1166 Ω. Investigation results of cyclic voltammetrys showed a pair of well‐defined and quasireversible redox peak of Hb with the formal potentials of ‐0.295 V (vs. SCE) in 0.1 mol·L^‐1 pH 7.0 PBS; the response time of the reduction peak currents of Hb was lower than 3s; a linear range for determination of H₂O₂ was from 5.0 μmol·L^‐1 to 1.3 mmol·L^‐1 with a detection limit of 1.6 μmol·L^‐1 (S/N = 3) and a sensitivity of 0.16 A·M^‐1·cm^‐2; the electron transfer rate constant and the apparent Michaelis‐Menten constant of Hb were 1.98 s^‐1 and 0.81 mmol·L^‐1, respectively. As a result, the case of the one‐step co‐electrodeposition and the promising feature of biocomposite could serve as a versatile platform for the fabrication of electrochemical biosensors.